{"publisher":"Xirkit — the structured parts marketplace","canonical":"https://www.xirkit.io/products/adafruit-feather-rp2040-802e","markdown":"https://www.xirkit.io/products/adafruit-feather-rp2040-802e/data.md","mcp":"https://www.xirkit.io/mcp","note":"Every value is traced to a cited source (see sources and per-value src). Null means unknown, never zero.","record":{"id":"802ebae8-7009-5d4f-9539-f06c5316b7b5","mpn":"4884","name":"Adafruit Feather RP2040","manufacturer":"Adafruit Industries","family":"dev_board","summary":"Adafruit Feather RP2040: dual Cortex-M0+ ~125 MHz, 264 KB RAM, 8 MB QSPI flash, 21 GPIO (4 ADC) at 3.3 V, USB-C, MCP73831 LiPo charger + JST, NeoPixel, STEMMA QT, 50.8×22.8 mm.","schema_version":"3.0","revision":"rev D","tags":["dev_board","battery powered","wearables","pio","native usb","beginner friendly","rp2040","adafruit","microcontroller","development board","i2c","spi","uart","usb","circuitpython","micropython","arduino"],"sources":[{"other":{},"id":"datasheet","url":"https://cdn-learn.adafruit.com/downloads/pdf/adafruit-feather-rp2040-pico.pdf","title":"Adafruit Feather RP2040 datasheet","publisher":"Adafruit Industries","kind":"datasheet","retrieved_at":"2026-09-24T14:46:28+00:00","field_paths":["spec.constraints.electrical.io_voltage_v","spec.constraints.electrical.logic_high_min_v","spec.constraints.electrical.pin_drive_max_ma","spec.constraints.electrical.supply_voltage_max_v","spec.constraints.electrical.supply_voltage_min_v","spec.geometry.cad.assumptions","spec.geometry.cad.bbox.height_mm","spec.geometry.cad.bbox.length_mm","spec.geometry.cad.bbox.width_mm","spec.geometry.cad.envelope_complete","spec.geometry.cad.mesh_path","spec.geometry.cad.step_path","spec.geometry.cad.verification","spec.geometry.dimensions.length_mm","spec.geometry.dimensions.width_mm","spec.geometry.feature_boxes","spec.geometry.mounting_holes","spec.provides.capabilities","spec.provides.features","spec.provides.gpio_count","spec.provides.memory.eeprom_kb","spec.provides.memory.flash_kb","spec.provides.memory.sram_kb","spec.provides.software_frameworks","spec.usage.connectors","spec.usage.pin_mappings","spec.usage.pinout","spec.usage.pinout_complete","spec.usage.requirements.data_inputs","spec.usage.requirements.power_inputs"],"notes":"sha256 180e8af7193411606706c083ee26be58ec5d0151664f559a8327d7560cff4037"},{"other":{},"id":"offer0","url":"https://www.adafruit.com/product/4884","title":"Adafruit listing","publisher":null,"kind":"distributor","retrieved_at":"2026-09-24T14:48:48+00:00","field_paths":["offers"],"notes":null}],"assets":[{"other":{},"kind":"datasheet","url":"https://cdn-learn.adafruit.com/downloads/pdf/adafruit-feather-rp2040-pico.pdf","label":"Datasheet","verification":"manufacturer","notes":null},{"other":{},"kind":"image","url":"https://cdn-shop.adafruit.com/970x728/4884-04.jpg","label":"Adafruit Feather RP2040 product photo","verification":"manufacturer","notes":"inspected: shows the actual board (8MB, USB-C, JST, STEMMA QT)"},{"other":{},"kind":"cad","url":"feather-rp2040.step","label":"STEP (generated from datasheet drawing)","verification":"generated","notes":"cad_check passed"}],"offers":[{"other":{"sku":"4884","price_breaks":[]},"supplier":"Adafruit","url":"https://www.adafruit.com/product/4884","currency":"USD","unit_price":11.95,"stock_status":"in_stock","region":"US","minimum_quantity":null,"checked_at":"2026-09-24T14:48:48+00:00","lead_time_days_min":null,"lead_time_days_max":null,"destination":"US","destination_postal_code":null,"notes":null}],"best_for":[{"other":{},"label":"Battery-powered and portable builds","reason":"On-board LiPo charger (Microchip MCP73831) — run from a cell and charge over USB.","basis":"engineering_inference"},{"other":{},"label":"Custom digital protocols and precise timing","reason":"Programmable I/O state machines bit-bang protocols (WS2812, DVI, extra UARTs) without CPU load.","basis":"engineering_inference"},{"other":{},"label":"Custom USB devices (HID, MIDI, serial)","reason":"USB is on the main chip (RP2040), so the board can enumerate as a keyboard, MIDI device or CDC serial port.","basis":"engineering_inference"},{"other":{},"label":"Learning and fast prototyping","reason":"Programs from CircuitPython, MicroPython, Arduino.","basis":"engineering_inference"}],"children":[{"other":{},"ref_id":"802ebae8-7009-5d4f-9539-f06c5316b7b5--mcu","role":"main_processor","count":1,"notes":"Raspberry Pi RP2040"},{"other":{},"ref_id":"802ebae8-7009-5d4f-9539-f06c5316b7b5--flash","role":"flash_memory","count":1,"notes":"Winbond W25Q64JVSSIQ"},{"other":{},"ref_id":"802ebae8-7009-5d4f-9539-f06c5316b7b5--charger","role":"battery_charger","count":1,"notes":"Microchip MCP73831"},{"other":{},"ref_id":"802ebae8-7009-5d4f-9539-f06c5316b7b5--neopixel","role":"rgb_led","count":1,"notes":"Worldsemi WS2812B"}],"spec":{"other":{},"usage":{"other":{},"pinout":[{"id":"J1-1","kind":"control","label":"Rst","notes":"reset; tie to ground to reset the board","other":{},"position":"1","reserved":false,"connector":"JP1 (16-pin)","functions":["rst"],"voltage_v":3.3,"electrical":{"ioh":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 RUN"},"iol":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 RUN"},"vih":{"max":3.6,"min":2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; max = IOVDD + 0.3; chip u1 RUN"},"vil":{"max":0.8,"min":-0.3,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; chip u1 RUN"},"voh":{"max":3.3,"min":2.62,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting; chip u1 RUN"},"vol":{"max":0.5,"min":0,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting; chip u1 RUN"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 RUN"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 RUN"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 RUN"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 RUN"},"io_voltage":{"unit":"V","value":3.3,"source":"p.8"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 RUN"},"abs_max_voltage":{"max":3.8,"min":-0.5,"unit":"V","source":"RP2040 datasheet p.615 table 615_3","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V); chip u1 RUN"},"five_volt_tolerant":{"value":false,"source":"RP2040 datasheet p.615 table 615_3","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V; chip u1 RUN"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 RUN"}},"max_drive_ma":12,"boot_strapping":false,"five_volt_tolerant":false},{"id":"J1-2","kind":"power_out","label":"3.3V","other":{},"position":"2","reserved":false,"connector":"JP1 (16-pin)","functions":["power_out"],"voltage_v":3.3,"electrical":{"output_current":{"max":500,"unit":"mA","source":"p.16","conditions":"peak; not continuously from 5 V (regulator overheats)"},"output_voltage":{"typ":3.3,"unit":"V","source":"p.16"}}},{"id":"J1-3","kind":"power_out","label":"3.3V","notes":"second 3.3V pad (label spans pads 2–3)","other":{},"position":"3","reserved":false,"connector":"JP1 (16-pin)","functions":["power_out"],"voltage_v":3.3,"electrical":{"output_current":{"max":500,"unit":"mA","source":"p.16","conditions":"peak; not continuously from 5 V (regulator overheats)"},"output_voltage":{"typ":3.3,"unit":"V","source":"p.16"}}},{"id":"J1-4","kind":"ground","label":"GND","notes":"common ground for all power and logic","other":{},"position":"4","reserved":false,"connector":"JP1 (16-pin)","functions":["ground"],"voltage_v":0,"electrical":{}},{"id":"J1-5","kind":"gpio","label":"A0","other":{},"position":"5","reserved":false,"connector":"JP1 (16-pin)","functions":["SPI1_SCK","UART1_CTS","I2C1_SDA","PWM5_A","SIO","PIO0","PIO1","USB_VBUS_EN","ADC0"],"voltage_v":3.3,"electrical":{"ioh":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO26"},"iol":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO26"},"vih":{"max":3.6,"min":2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; max = IOVDD + 0.3; chip u1 GPIO26"},"vil":{"max":0.8,"min":-0.3,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; chip u1 GPIO26"},"voh":{"max":3.3,"min":2.62,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO26"},"vol":{"max":0.5,"min":0,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO26"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO26"},"esd_hbm":{"max":2,"unit":"kV","source":"RP2040 datasheet p.615 table 615_4","conditions":"chip u1 GPIO26"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO26"},"adc_enob":{"min":8.7,"source":"RP2040 datasheet p.618 table 618_1","conditions":"chip u1 GPIO26"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO26"},"io_voltage":{"unit":"V","value":3.3,"source":"p.8"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO26"},"abs_max_voltage":{"max":3.8,"min":-0.5,"unit":"V","source":"RP2040 datasheet p.615 table 615_3","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V); chip u1 GPIO26"},"adc_input_range":{"max":3.3,"min":0,"unit":"V","source":"RP2040 datasheet p.618 table 618_1","conditions":"max = ADC_AVDD (3.3 V typ); chip u1 GPIO26"},"five_volt_tolerant":{"value":false,"source":"RP2040 datasheet p.615 table 615_3","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V; chip u1 GPIO26"},"adc_input_impedance":{"min":100,"unit":"kΩ","source":"RP2040 datasheet p.618 table 618_1","conditions":"chip u1 GPIO26"}},"max_drive_ma":12,"boot_strapping":false,"five_volt_tolerant":false},{"id":"J1-6","kind":"gpio","label":"A1","other":{},"position":"6","reserved":false,"connector":"JP1 (16-pin)","functions":["SPI1_TX","UART1_RTS","I2C1_SCL","PWM5_B","SIO","PIO0","PIO1","USB_OVCUR_DET","ADC1"],"voltage_v":3.3,"electrical":{"ioh":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO27"},"iol":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO27"},"vih":{"max":3.6,"min":2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; max = IOVDD + 0.3; chip u1 GPIO27"},"vil":{"max":0.8,"min":-0.3,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; chip u1 GPIO27"},"voh":{"max":3.3,"min":2.62,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO27"},"vol":{"max":0.5,"min":0,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO27"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO27"},"esd_hbm":{"max":2,"unit":"kV","source":"RP2040 datasheet p.615 table 615_4","conditions":"chip u1 GPIO27"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO27"},"adc_enob":{"min":8.7,"source":"RP2040 datasheet p.618 table 618_1","conditions":"chip u1 GPIO27"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO27"},"io_voltage":{"unit":"V","value":3.3,"source":"p.8"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO27"},"abs_max_voltage":{"max":3.8,"min":-0.5,"unit":"V","source":"RP2040 datasheet p.615 table 615_3","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V); chip u1 GPIO27"},"adc_input_range":{"max":3.3,"min":0,"unit":"V","source":"RP2040 datasheet p.618 table 618_1","conditions":"max = ADC_AVDD (3.3 V typ); chip u1 GPIO27"},"five_volt_tolerant":{"value":false,"source":"RP2040 datasheet p.615 table 615_3","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V; chip u1 GPIO27"},"adc_input_impedance":{"min":100,"unit":"kΩ","source":"RP2040 datasheet p.618 table 618_1","conditions":"chip u1 GPIO27"}},"max_drive_ma":12,"boot_strapping":false,"five_volt_tolerant":false},{"id":"J1-7","kind":"gpio","label":"A2","other":{},"position":"7","reserved":false,"connector":"JP1 (16-pin)","functions":["SPI1_RX","UART0_TX","I2C0_SDA","PWM6_A","SIO","PIO0","PIO1","USB_VBUS_DET","ADC2"],"voltage_v":3.3,"electrical":{"ioh":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO28"},"iol":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO28"},"vih":{"max":3.6,"min":2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; max = IOVDD + 0.3; chip u1 GPIO28"},"vil":{"max":0.8,"min":-0.3,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; chip u1 GPIO28"},"voh":{"max":3.3,"min":2.62,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO28"},"vol":{"max":0.5,"min":0,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO28"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO28"},"esd_hbm":{"max":2,"unit":"kV","source":"RP2040 datasheet p.615 table 615_4","conditions":"chip u1 GPIO28"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO28"},"adc_enob":{"min":8.7,"source":"RP2040 datasheet p.618 table 618_1","conditions":"chip u1 GPIO28"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO28"},"io_voltage":{"unit":"V","value":3.3,"source":"p.8"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO28"},"abs_max_voltage":{"max":3.8,"min":-0.5,"unit":"V","source":"RP2040 datasheet p.615 table 615_3","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V); chip u1 GPIO28"},"adc_input_range":{"max":3.3,"min":0,"unit":"V","source":"RP2040 datasheet p.618 table 618_1","conditions":"max = ADC_AVDD (3.3 V typ); chip u1 GPIO28"},"five_volt_tolerant":{"value":false,"source":"RP2040 datasheet p.615 table 615_3","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V; chip u1 GPIO28"},"adc_input_impedance":{"min":100,"unit":"kΩ","source":"RP2040 datasheet p.618 table 618_1","conditions":"chip u1 GPIO28"}},"max_drive_ma":12,"boot_strapping":false,"five_volt_tolerant":false},{"id":"J1-8","kind":"gpio","label":"A3","other":{},"position":"8","reserved":false,"connector":"JP1 (16-pin)","functions":["SPI1_CSn","UART0_RX","I2C0_SCL","PWM6_B","SIO","PIO0","PIO1","USB_VBUS_EN","ADC3"],"voltage_v":3.3,"electrical":{"ioh":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO29"},"iol":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO29"},"vih":{"max":3.6,"min":2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; max = IOVDD + 0.3; chip u1 GPIO29"},"vil":{"max":0.8,"min":-0.3,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; chip u1 GPIO29"},"voh":{"max":3.3,"min":2.62,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO29"},"vol":{"max":0.5,"min":0,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO29"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO29"},"esd_hbm":{"max":2,"unit":"kV","source":"RP2040 datasheet p.615 table 615_4","conditions":"chip u1 GPIO29"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO29"},"adc_enob":{"min":8.7,"source":"RP2040 datasheet p.618 table 618_1","conditions":"chip u1 GPIO29"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO29"},"io_voltage":{"unit":"V","value":3.3,"source":"p.8"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO29"},"abs_max_voltage":{"max":3.8,"min":-0.5,"unit":"V","source":"RP2040 datasheet p.615 table 615_3","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V); chip u1 GPIO29"},"adc_input_range":{"max":3.3,"min":0,"unit":"V","source":"RP2040 datasheet p.618 table 618_1","conditions":"max = ADC_AVDD (3.3 V typ); chip u1 GPIO29"},"five_volt_tolerant":{"value":false,"source":"RP2040 datasheet p.615 table 615_3","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V; chip u1 GPIO29"},"adc_input_impedance":{"min":100,"unit":"kΩ","source":"RP2040 datasheet p.618 table 618_1","conditions":"chip u1 GPIO29"}},"max_drive_ma":12,"boot_strapping":false,"five_volt_tolerant":false},{"id":"J1-9","kind":"gpio","label":"D24","other":{},"position":"9","reserved":false,"connector":"JP1 (16-pin)","functions":["Arduino Wire1 SDA","SPI1_RX","UART1_TX","I2C0_SDA","PWM4_A","SIO","PIO0","PIO1","CLOCK_GPOUT2","USB_OVCUR_DET"],"voltage_v":3.3,"electrical":{"ioh":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO24"},"iol":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO24"},"vih":{"max":3.6,"min":2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; max = IOVDD + 0.3; chip u1 GPIO24"},"vil":{"max":0.8,"min":-0.3,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; chip u1 GPIO24"},"voh":{"max":3.3,"min":2.62,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO24"},"vol":{"max":0.5,"min":0,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO24"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO24"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 GPIO24"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO24"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO24"},"io_voltage":{"unit":"V","value":3.3,"source":"p.8"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO24"},"abs_max_voltage":{"max":3.8,"min":-0.5,"unit":"V","source":"RP2040 datasheet p.615 table 615_3","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V); chip u1 GPIO24"},"five_volt_tolerant":{"value":false,"source":"RP2040 datasheet p.615 table 615_3","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V; chip u1 GPIO24"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 GPIO24"}},"max_drive_ma":12,"boot_strapping":false,"five_volt_tolerant":false},{"id":"J1-10","kind":"gpio","label":"D25","other":{},"position":"10","reserved":false,"connector":"JP1 (16-pin)","functions":["Arduino Wire1 SCL","SPI1_CSn","UART1_RX","I2C0_SCL","PWM4_B","SIO","PIO0","PIO1","CLOCK_GPOUT3","USB_VBUS_DET"],"voltage_v":3.3,"electrical":{"ioh":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO25"},"iol":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO25"},"vih":{"max":3.6,"min":2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; max = IOVDD + 0.3; chip u1 GPIO25"},"vil":{"max":0.8,"min":-0.3,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; chip u1 GPIO25"},"voh":{"max":3.3,"min":2.62,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO25"},"vol":{"max":0.5,"min":0,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO25"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO25"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 GPIO25"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO25"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO25"},"io_voltage":{"unit":"V","value":3.3,"source":"p.8"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO25"},"abs_max_voltage":{"max":3.8,"min":-0.5,"unit":"V","source":"RP2040 datasheet p.615 table 615_3","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V); chip u1 GPIO25"},"five_volt_tolerant":{"value":false,"source":"RP2040 datasheet p.615 table 615_3","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V; chip u1 GPIO25"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 GPIO25"}},"max_drive_ma":12,"boot_strapping":false,"five_volt_tolerant":false},{"id":"J1-11","kind":"gpio","label":"SCK","other":{},"position":"11","reserved":false,"connector":"JP1 (16-pin)","functions":["SPI0_SCK","UART0_CTS","I2C1_SDA","PWM1_A","SIO","PIO0","PIO1","USB_OVCUR_DET"],"voltage_v":3.3,"electrical":{"ioh":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO18"},"iol":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO18"},"vih":{"max":3.6,"min":2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; max = IOVDD + 0.3; chip u1 GPIO18"},"vil":{"max":0.8,"min":-0.3,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; chip u1 GPIO18"},"voh":{"max":3.3,"min":2.62,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO18"},"vol":{"max":0.5,"min":0,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO18"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO18"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 GPIO18"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO18"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO18"},"io_voltage":{"unit":"V","value":3.3,"source":"p.8"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO18"},"abs_max_voltage":{"max":3.8,"min":-0.5,"unit":"V","source":"RP2040 datasheet p.615 table 615_3","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V); chip u1 GPIO18"},"five_volt_tolerant":{"value":false,"source":"RP2040 datasheet p.615 table 615_3","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V; chip u1 GPIO18"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 GPIO18"}},"max_drive_ma":12,"boot_strapping":false,"five_volt_tolerant":false},{"id":"J1-12","kind":"gpio","label":"MO","other":{},"position":"12","reserved":false,"connector":"JP1 (16-pin)","functions":["SPI0_TX","UART0_RTS","I2C1_SCL","PWM1_B","SIO","PIO0","PIO1","USB_VBUS_DET"],"voltage_v":3.3,"electrical":{"ioh":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO19"},"iol":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO19"},"vih":{"max":3.6,"min":2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; max = IOVDD + 0.3; chip u1 GPIO19"},"vil":{"max":0.8,"min":-0.3,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; chip u1 GPIO19"},"voh":{"max":3.3,"min":2.62,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO19"},"vol":{"max":0.5,"min":0,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO19"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO19"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 GPIO19"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO19"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO19"},"io_voltage":{"unit":"V","value":3.3,"source":"p.8"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO19"},"abs_max_voltage":{"max":3.8,"min":-0.5,"unit":"V","source":"RP2040 datasheet p.615 table 615_3","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V); chip u1 GPIO19"},"five_volt_tolerant":{"value":false,"source":"RP2040 datasheet p.615 table 615_3","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V; chip u1 GPIO19"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 GPIO19"}},"max_drive_ma":12,"boot_strapping":false,"five_volt_tolerant":false},{"id":"J1-13","kind":"gpio","label":"MI","other":{},"position":"13","reserved":false,"connector":"JP1 (16-pin)","functions":["SPI0_RX","UART1_TX","I2C0_SDA","PWM2_A","SIO","PIO0","PIO1","CLOCK_GPIN0","USB_VBUS_EN"],"voltage_v":3.3,"electrical":{"ioh":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO20"},"iol":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO20"},"vih":{"max":3.6,"min":2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; max = IOVDD + 0.3; chip u1 GPIO20"},"vil":{"max":0.8,"min":-0.3,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; chip u1 GPIO20"},"voh":{"max":3.3,"min":2.62,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO20"},"vol":{"max":0.5,"min":0,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO20"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO20"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 GPIO20"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO20"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO20"},"io_voltage":{"unit":"V","value":3.3,"source":"p.8"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO20"},"abs_max_voltage":{"max":3.8,"min":-0.5,"unit":"V","source":"RP2040 datasheet p.615 table 615_3","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V); chip u1 GPIO20"},"five_volt_tolerant":{"value":false,"source":"RP2040 datasheet p.615 table 615_3","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V; chip u1 GPIO20"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 GPIO20"}},"max_drive_ma":12,"boot_strapping":false,"five_volt_tolerant":false},{"id":"J1-14","kind":"gpio","label":"RX","other":{},"position":"14","reserved":false,"connector":"JP1 (16-pin)","functions":["SPI0_CSn","UART0_RX","I2C0_SCL","PWM0_B","SIO","PIO0","PIO1","USB_VBUS_DET"],"voltage_v":3.3,"electrical":{"ioh":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO1"},"iol":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO1"},"vih":{"max":3.6,"min":2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; max = IOVDD + 0.3; chip u1 GPIO1"},"vil":{"max":0.8,"min":-0.3,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; chip u1 GPIO1"},"voh":{"max":3.3,"min":2.62,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO1"},"vol":{"max":0.5,"min":0,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO1"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO1"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 GPIO1"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO1"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO1"},"io_voltage":{"unit":"V","value":3.3,"source":"p.8"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO1"},"abs_max_voltage":{"max":3.8,"min":-0.5,"unit":"V","source":"RP2040 datasheet p.615 table 615_3","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V); chip u1 GPIO1"},"five_volt_tolerant":{"value":false,"source":"RP2040 datasheet p.615 table 615_3","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V; chip u1 GPIO1"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 GPIO1"}},"max_drive_ma":12,"boot_strapping":false,"five_volt_tolerant":false},{"id":"J1-15","kind":"gpio","label":"TX","other":{},"position":"15","reserved":false,"connector":"JP1 (16-pin)","functions":["SPI0_RX","UART0_TX","I2C0_SDA","PWM0_A","SIO","PIO0","PIO1","USB_OVCUR_DET"],"voltage_v":3.3,"electrical":{"ioh":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO0"},"iol":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO0"},"vih":{"max":3.6,"min":2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; max = IOVDD + 0.3; chip u1 GPIO0"},"vil":{"max":0.8,"min":-0.3,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; chip u1 GPIO0"},"voh":{"max":3.3,"min":2.62,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO0"},"vol":{"max":0.5,"min":0,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO0"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO0"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 GPIO0"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO0"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO0"},"io_voltage":{"unit":"V","value":3.3,"source":"p.8"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO0"},"abs_max_voltage":{"max":3.8,"min":-0.5,"unit":"V","source":"RP2040 datasheet p.615 table 615_3","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V); chip u1 GPIO0"},"five_volt_tolerant":{"value":false,"source":"RP2040 datasheet p.615 table 615_3","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V; chip u1 GPIO0"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 GPIO0"}},"max_drive_ma":12,"boot_strapping":false,"five_volt_tolerant":false},{"id":"J1-16","kind":"gpio","label":"D4","other":{},"position":"16","reserved":false,"connector":"JP1 (16-pin)","functions":["SPI0_SCK","UART1_CTS","I2C1_SDA","PWM3_A","SIO","PIO0","PIO1","USB_OVCUR_DET"],"voltage_v":3.3,"electrical":{"ioh":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO6"},"iol":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO6"},"vih":{"max":3.6,"min":2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; max = IOVDD + 0.3; chip u1 GPIO6"},"vil":{"max":0.8,"min":-0.3,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; chip u1 GPIO6"},"voh":{"max":3.3,"min":2.62,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO6"},"vol":{"max":0.5,"min":0,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO6"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO6"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 GPIO6"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO6"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO6"},"io_voltage":{"unit":"V","value":3.3,"source":"p.8"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO6"},"abs_max_voltage":{"max":3.8,"min":-0.5,"unit":"V","source":"RP2040 datasheet p.615 table 615_3","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V); chip u1 GPIO6"},"five_volt_tolerant":{"value":false,"source":"RP2040 datasheet p.615 table 615_3","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V; chip u1 GPIO6"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 GPIO6"}},"max_drive_ma":12,"boot_strapping":false,"five_volt_tolerant":false},{"id":"J3-1","kind":"power_in","label":"BAT","notes":"positive voltage to/from the 2-pin JST jack for the optional Lipoly battery","other":{},"position":"1","reserved":false,"connector":"JP3 (12-pin)","functions":["power_in"],"voltage_v":3.7,"electrical":{"input_voltage":{"max":4.2,"typ":3.7,"unit":"V","source":"p.35","conditions":"3.7 V nominal, 4.2 V full, ~3.2 V cut-off"},"charge_current":{"typ":200,"unit":"mA","source":"p.8"}}},{"id":"J3-2","kind":"control","label":"EN","notes":"3.3V regulator enable, pulled up; connect to ground to disable","other":{},"position":"2","reserved":false,"connector":"JP3 (12-pin)","functions":["en"],"electrical":{}},{"id":"J3-3","kind":"power_in","label":"USB","notes":"positive voltage to/from the USB C jack, if USB is connected","other":{},"position":"3","reserved":false,"connector":"JP3 (12-pin)","functions":["power_in"],"voltage_v":5,"electrical":{"input_voltage":{"typ":5,"unit":"V","source":"p.36"}}},{"id":"J3-4","kind":"gpio","label":"D13","other":{},"position":"4","reserved":false,"connector":"JP3 (12-pin)","functions":["red LED (board.LED)","SPI1_CSn","UART0_RX","I2C0_SCL","PWM6_B","SIO","PIO0","PIO1","USB_VBUS_DET"],"voltage_v":3.3,"electrical":{"ioh":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO13"},"iol":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO13"},"vih":{"max":3.6,"min":2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; max = IOVDD + 0.3; chip u1 GPIO13"},"vil":{"max":0.8,"min":-0.3,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; chip u1 GPIO13"},"voh":{"max":3.3,"min":2.62,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO13"},"vol":{"max":0.5,"min":0,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO13"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO13"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 GPIO13"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO13"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO13"},"io_voltage":{"unit":"V","value":3.3,"source":"p.8"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO13"},"abs_max_voltage":{"max":3.8,"min":-0.5,"unit":"V","source":"RP2040 datasheet p.615 table 615_3","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V); chip u1 GPIO13"},"five_volt_tolerant":{"value":false,"source":"RP2040 datasheet p.615 table 615_3","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V; chip u1 GPIO13"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 GPIO13"}},"max_drive_ma":12,"boot_strapping":false,"five_volt_tolerant":false},{"id":"J3-5","kind":"gpio","label":"D12","other":{},"position":"5","reserved":false,"connector":"JP3 (12-pin)","functions":["SPI1_RX","UART0_TX","I2C0_SDA","PWM6_A","SIO","PIO0","PIO1","USB_OVCUR_DET"],"voltage_v":3.3,"electrical":{"ioh":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO12"},"iol":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO12"},"vih":{"max":3.6,"min":2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; max = IOVDD + 0.3; chip u1 GPIO12"},"vil":{"max":0.8,"min":-0.3,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; chip u1 GPIO12"},"voh":{"max":3.3,"min":2.62,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO12"},"vol":{"max":0.5,"min":0,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO12"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO12"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 GPIO12"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO12"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO12"},"io_voltage":{"unit":"V","value":3.3,"source":"p.8"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO12"},"abs_max_voltage":{"max":3.8,"min":-0.5,"unit":"V","source":"RP2040 datasheet p.615 table 615_3","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V); chip u1 GPIO12"},"five_volt_tolerant":{"value":false,"source":"RP2040 datasheet p.615 table 615_3","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V; chip u1 GPIO12"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 GPIO12"}},"max_drive_ma":12,"boot_strapping":false,"five_volt_tolerant":false},{"id":"J3-6","kind":"gpio","label":"D11","other":{},"position":"6","reserved":false,"connector":"JP3 (12-pin)","functions":["SPI1_TX","UART1_RTS","I2C1_SCL","PWM5_B","SIO","PIO0","PIO1","USB_VBUS_EN"],"voltage_v":3.3,"electrical":{"ioh":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO11"},"iol":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO11"},"vih":{"max":3.6,"min":2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; max = IOVDD + 0.3; chip u1 GPIO11"},"vil":{"max":0.8,"min":-0.3,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; chip u1 GPIO11"},"voh":{"max":3.3,"min":2.62,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO11"},"vol":{"max":0.5,"min":0,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO11"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO11"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 GPIO11"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO11"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO11"},"io_voltage":{"unit":"V","value":3.3,"source":"p.8"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO11"},"abs_max_voltage":{"max":3.8,"min":-0.5,"unit":"V","source":"RP2040 datasheet p.615 table 615_3","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V); chip u1 GPIO11"},"five_volt_tolerant":{"value":false,"source":"RP2040 datasheet p.615 table 615_3","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V; chip u1 GPIO11"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 GPIO11"}},"max_drive_ma":12,"boot_strapping":false,"five_volt_tolerant":false},{"id":"J3-7","kind":"gpio","label":"D10","other":{},"position":"7","reserved":false,"connector":"JP3 (12-pin)","functions":["SPI1_SCK","UART1_CTS","I2C1_SDA","PWM5_A","SIO","PIO0","PIO1","USB_VBUS_DET"],"voltage_v":3.3,"electrical":{"ioh":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO10"},"iol":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO10"},"vih":{"max":3.6,"min":2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; max = IOVDD + 0.3; chip u1 GPIO10"},"vil":{"max":0.8,"min":-0.3,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; chip u1 GPIO10"},"voh":{"max":3.3,"min":2.62,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO10"},"vol":{"max":0.5,"min":0,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO10"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO10"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 GPIO10"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO10"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO10"},"io_voltage":{"unit":"V","value":3.3,"source":"p.8"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO10"},"abs_max_voltage":{"max":3.8,"min":-0.5,"unit":"V","source":"RP2040 datasheet p.615 table 615_3","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V); chip u1 GPIO10"},"five_volt_tolerant":{"value":false,"source":"RP2040 datasheet p.615 table 615_3","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V; chip u1 GPIO10"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 GPIO10"}},"max_drive_ma":12,"boot_strapping":false,"five_volt_tolerant":false},{"id":"J3-8","kind":"gpio","label":"D9","other":{},"position":"8","reserved":false,"connector":"JP3 (12-pin)","functions":["SPI1_CSn","UART1_RX","I2C0_SCL","PWM4_B","SIO","PIO0","PIO1","USB_OVCUR_DET"],"voltage_v":3.3,"electrical":{"ioh":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO9"},"iol":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO9"},"vih":{"max":3.6,"min":2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; max = IOVDD + 0.3; chip u1 GPIO9"},"vil":{"max":0.8,"min":-0.3,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; chip u1 GPIO9"},"voh":{"max":3.3,"min":2.62,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO9"},"vol":{"max":0.5,"min":0,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO9"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO9"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 GPIO9"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO9"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO9"},"io_voltage":{"unit":"V","value":3.3,"source":"p.8"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO9"},"abs_max_voltage":{"max":3.8,"min":-0.5,"unit":"V","source":"RP2040 datasheet p.615 table 615_3","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V); chip u1 GPIO9"},"five_volt_tolerant":{"value":false,"source":"RP2040 datasheet p.615 table 615_3","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V; chip u1 GPIO9"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 GPIO9"}},"max_drive_ma":12,"boot_strapping":false,"five_volt_tolerant":false},{"id":"J3-9","kind":"gpio","label":"D6","other":{},"position":"9","reserved":false,"connector":"JP3 (12-pin)","functions":["SPI1_RX","UART1_TX","I2C0_SDA","PWM4_A","SIO","PIO0","PIO1","USB_VBUS_EN"],"voltage_v":3.3,"electrical":{"ioh":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO8"},"iol":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO8"},"vih":{"max":3.6,"min":2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; max = IOVDD + 0.3; chip u1 GPIO8"},"vil":{"max":0.8,"min":-0.3,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; chip u1 GPIO8"},"voh":{"max":3.3,"min":2.62,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO8"},"vol":{"max":0.5,"min":0,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO8"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO8"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 GPIO8"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO8"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO8"},"io_voltage":{"unit":"V","value":3.3,"source":"p.8"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO8"},"abs_max_voltage":{"max":3.8,"min":-0.5,"unit":"V","source":"RP2040 datasheet p.615 table 615_3","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V); chip u1 GPIO8"},"five_volt_tolerant":{"value":false,"source":"RP2040 datasheet p.615 table 615_3","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V; chip u1 GPIO8"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 GPIO8"}},"max_drive_ma":12,"boot_strapping":false,"five_volt_tolerant":false},{"id":"J3-10","kind":"gpio","label":"D5","other":{},"position":"10","reserved":false,"connector":"JP3 (12-pin)","functions":["SPI0_TX","UART1_RTS","I2C1_SCL","PWM3_B","SIO","PIO0","PIO1","USB_VBUS_DET"],"voltage_v":3.3,"electrical":{"ioh":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO7"},"iol":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO7"},"vih":{"max":3.6,"min":2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; max = IOVDD + 0.3; chip u1 GPIO7"},"vil":{"max":0.8,"min":-0.3,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; chip u1 GPIO7"},"voh":{"max":3.3,"min":2.62,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO7"},"vol":{"max":0.5,"min":0,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO7"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO7"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 GPIO7"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO7"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO7"},"io_voltage":{"unit":"V","value":3.3,"source":"p.8"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO7"},"abs_max_voltage":{"max":3.8,"min":-0.5,"unit":"V","source":"RP2040 datasheet p.615 table 615_3","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V); chip u1 GPIO7"},"five_volt_tolerant":{"value":false,"source":"RP2040 datasheet p.615 table 615_3","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V; chip u1 GPIO7"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 GPIO7"}},"max_drive_ma":12,"boot_strapping":false,"five_volt_tolerant":false},{"id":"J3-11","kind":"gpio","label":"SCL","other":{},"position":"11","reserved":false,"connector":"JP3 (12-pin)","functions":["STEMMA QT SCL (I2C1)","SPI0_TX","UART0_RTS","I2C1_SCL","PWM1_B","SIO","PIO0","PIO1","USB_OVCUR_DET"],"voltage_v":3.3,"electrical":{"ioh":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO3"},"iol":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO3"},"vih":{"max":3.6,"min":2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; max = IOVDD + 0.3; chip u1 GPIO3"},"vil":{"max":0.8,"min":-0.3,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; chip u1 GPIO3"},"voh":{"max":3.3,"min":2.62,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO3"},"vol":{"max":0.5,"min":0,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO3"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO3"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 GPIO3"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO3"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO3"},"io_voltage":{"unit":"V","value":3.3,"source":"p.8"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO3"},"abs_max_voltage":{"max":3.8,"min":-0.5,"unit":"V","source":"RP2040 datasheet p.615 table 615_3","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V); chip u1 GPIO3"},"five_volt_tolerant":{"value":false,"source":"RP2040 datasheet p.615 table 615_3","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V; chip u1 GPIO3"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 GPIO3"}},"max_drive_ma":12,"boot_strapping":false,"five_volt_tolerant":false},{"id":"J3-12","kind":"gpio","label":"SDA","other":{},"position":"12","reserved":false,"connector":"JP3 (12-pin)","functions":["STEMMA QT SDA (I2C1)","SPI0_SCK","UART0_CTS","I2C1_SDA","PWM1_A","SIO","PIO0","PIO1","USB_VBUS_EN"],"voltage_v":3.3,"electrical":{"ioh":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO2"},"iol":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 GPIO2"},"vih":{"max":3.6,"min":2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; max = IOVDD + 0.3; chip u1 GPIO2"},"vil":{"max":0.8,"min":-0.3,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; chip u1 GPIO2"},"voh":{"max":3.3,"min":2.62,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO2"},"vol":{"max":0.5,"min":0,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting; chip u1 GPIO2"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO2"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 GPIO2"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO2"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO2"},"io_voltage":{"unit":"V","value":3.3,"source":"p.8"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO2"},"abs_max_voltage":{"max":3.8,"min":-0.5,"unit":"V","source":"RP2040 datasheet p.615 table 615_3","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V); chip u1 GPIO2"},"five_volt_tolerant":{"value":false,"source":"RP2040 datasheet p.615 table 615_3","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V; chip u1 GPIO2"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 GPIO2"}},"max_drive_ma":12,"boot_strapping":false,"five_volt_tolerant":false},{"id":"SWCLK","kind":"debug","label":"SWCLK","other":{},"position":"back pad","reserved":false,"connector":"SWD pads","functions":["swclk"],"voltage_v":3.3,"electrical":{"ioh":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 SWCLK"},"iol":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 SWCLK"},"vih":{"max":3.6,"min":2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; max = IOVDD + 0.3; chip u1 SWCLK"},"vil":{"max":0.8,"min":-0.3,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; chip u1 SWCLK"},"voh":{"max":3.3,"min":2.62,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting; chip u1 SWCLK"},"vol":{"max":0.5,"min":0,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting; chip u1 SWCLK"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 SWCLK"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 SWCLK"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 SWCLK"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 SWCLK"},"io_voltage":{"unit":"V","value":3.3,"source":"p.8"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 SWCLK"},"abs_max_voltage":{"max":3.8,"min":-0.5,"unit":"V","source":"RP2040 datasheet p.615 table 615_3","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V); chip u1 SWCLK"},"five_volt_tolerant":{"value":false,"source":"RP2040 datasheet p.615 table 615_3","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V; chip u1 SWCLK"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 SWCLK"}},"max_drive_ma":12,"boot_strapping":false,"five_volt_tolerant":false},{"id":"SWDIO","kind":"debug","label":"SWDIO","other":{},"position":"back pad","reserved":false,"connector":"SWD pads","functions":["swdio"],"voltage_v":3.3,"electrical":{"ioh":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 SWD"},"iol":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 SWD"},"vih":{"max":3.6,"min":2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; max = IOVDD + 0.3; chip u1 SWD"},"vil":{"max":0.8,"min":-0.3,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; chip u1 SWD"},"voh":{"max":3.3,"min":2.62,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting; chip u1 SWD"},"vol":{"max":0.5,"min":0,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting; chip u1 SWD"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 SWD"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 SWD"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 SWD"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 SWD"},"io_voltage":{"unit":"V","value":3.3,"source":"p.8"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 SWD"},"abs_max_voltage":{"max":3.8,"min":-0.5,"unit":"V","source":"RP2040 datasheet p.615 table 615_3","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V); chip u1 SWD"},"five_volt_tolerant":{"value":false,"source":"RP2040 datasheet p.615 table 615_3","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V; chip u1 SWD"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 SWD"}},"max_drive_ma":12,"boot_strapping":false,"five_volt_tolerant":false}],"derived":{},"connectors":[{"id":"usb","kind":"USB Type-C","other":{}},{"id":"battery","kind":"2-pin JST PH (LiPoly)","other":{},"pin_count":2},{"id":"stemma","kind":"STEMMA QT / Qwiic (JST SH 4-pin, I2C1)","other":{},"pin_count":4},{"id":"headers","kind":"Feather headers 16 + 12 pin, 0.1in","other":{},"pitch_mm":2.54,"pin_count":28},{"id":"swd","kind":"2×5 0.05in SWD header footprint (unpopulated)","other":{},"pitch_mm":1.27,"pin_count":10}],"pin_mappings":[{"other":{},"signal":"RUN","child_ref":"802ebae8-7009-5d4f-9539-f06c5316b7b5--mcu","route_type":"direct","board_pin_id":"J1-1","child_pin_id":"RUN"},{"other":{},"signal":"GPIO26","child_ref":"802ebae8-7009-5d4f-9539-f06c5316b7b5--mcu","route_type":"direct","board_pin_id":"J1-5","child_pin_id":"GPIO26"},{"other":{},"signal":"GPIO27","child_ref":"802ebae8-7009-5d4f-9539-f06c5316b7b5--mcu","route_type":"direct","board_pin_id":"J1-6","child_pin_id":"GPIO27"},{"other":{},"signal":"GPIO28","child_ref":"802ebae8-7009-5d4f-9539-f06c5316b7b5--mcu","route_type":"direct","board_pin_id":"J1-7","child_pin_id":"GPIO28"},{"other":{},"signal":"GPIO29","child_ref":"802ebae8-7009-5d4f-9539-f06c5316b7b5--mcu","route_type":"direct","board_pin_id":"J1-8","child_pin_id":"GPIO29"},{"other":{},"signal":"GPIO24","child_ref":"802ebae8-7009-5d4f-9539-f06c5316b7b5--mcu","route_type":"direct","board_pin_id":"J1-9","child_pin_id":"GPIO24"},{"other":{},"signal":"GPIO25","child_ref":"802ebae8-7009-5d4f-9539-f06c5316b7b5--mcu","route_type":"direct","board_pin_id":"J1-10","child_pin_id":"GPIO25"},{"other":{},"signal":"GPIO18","child_ref":"802ebae8-7009-5d4f-9539-f06c5316b7b5--mcu","route_type":"direct","board_pin_id":"J1-11","child_pin_id":"GPIO18"},{"other":{},"signal":"GPIO19","child_ref":"802ebae8-7009-5d4f-9539-f06c5316b7b5--mcu","route_type":"direct","board_pin_id":"J1-12","child_pin_id":"GPIO19"},{"other":{},"signal":"GPIO20","child_ref":"802ebae8-7009-5d4f-9539-f06c5316b7b5--mcu","route_type":"direct","board_pin_id":"J1-13","child_pin_id":"GPIO20"},{"other":{},"signal":"GPIO1","child_ref":"802ebae8-7009-5d4f-9539-f06c5316b7b5--mcu","route_type":"direct","board_pin_id":"J1-14","child_pin_id":"GPIO1"},{"other":{},"signal":"GPIO0","child_ref":"802ebae8-7009-5d4f-9539-f06c5316b7b5--mcu","route_type":"direct","board_pin_id":"J1-15","child_pin_id":"GPIO0"},{"other":{},"signal":"GPIO6","child_ref":"802ebae8-7009-5d4f-9539-f06c5316b7b5--mcu","route_type":"direct","board_pin_id":"J1-16","child_pin_id":"GPIO6"},{"other":{},"signal":"GPIO13","child_ref":"802ebae8-7009-5d4f-9539-f06c5316b7b5--mcu","route_type":"direct","board_pin_id":"J3-4","child_pin_id":"GPIO13"},{"other":{},"signal":"GPIO12","child_ref":"802ebae8-7009-5d4f-9539-f06c5316b7b5--mcu","route_type":"direct","board_pin_id":"J3-5","child_pin_id":"GPIO12"},{"other":{},"signal":"GPIO11","child_ref":"802ebae8-7009-5d4f-9539-f06c5316b7b5--mcu","route_type":"direct","board_pin_id":"J3-6","child_pin_id":"GPIO11"},{"other":{},"signal":"GPIO10","child_ref":"802ebae8-7009-5d4f-9539-f06c5316b7b5--mcu","route_type":"direct","board_pin_id":"J3-7","child_pin_id":"GPIO10"},{"other":{},"signal":"GPIO9","child_ref":"802ebae8-7009-5d4f-9539-f06c5316b7b5--mcu","route_type":"direct","board_pin_id":"J3-8","child_pin_id":"GPIO9"},{"other":{},"signal":"GPIO8","child_ref":"802ebae8-7009-5d4f-9539-f06c5316b7b5--mcu","route_type":"direct","board_pin_id":"J3-9","child_pin_id":"GPIO8"},{"other":{},"signal":"GPIO7","child_ref":"802ebae8-7009-5d4f-9539-f06c5316b7b5--mcu","route_type":"direct","board_pin_id":"J3-10","child_pin_id":"GPIO7"},{"other":{},"signal":"GPIO3","child_ref":"802ebae8-7009-5d4f-9539-f06c5316b7b5--mcu","route_type":"direct","board_pin_id":"J3-11","child_pin_id":"GPIO3"},{"other":{},"signal":"GPIO2","child_ref":"802ebae8-7009-5d4f-9539-f06c5316b7b5--mcu","route_type":"direct","board_pin_id":"J3-12","child_pin_id":"GPIO2"},{"other":{},"signal":"SWCLK","child_ref":"802ebae8-7009-5d4f-9539-f06c5316b7b5--mcu","route_type":"direct","board_pin_id":"SWCLK","child_pin_id":"SWCLK"},{"other":{},"signal":"SWD","child_ref":"802ebae8-7009-5d4f-9539-f06c5316b7b5--mcu","route_type":"direct","board_pin_id":"SWDIO","child_pin_id":"SWD"}],"requirements":{"other":{},"data_inputs":["USB-C","SWD"],"power_inputs":[{"name":"BAT","notes":"positive voltage to/from the 2-pin JST jack for the optional Lipoly battery","other":{},"voltage_max_v":4.2},{"name":"USB","notes":"positive voltage to/from the USB C jack, if USB is connected","other":{}}]},"pinout_complete":true},"geometry":{"cad":{"bbox":{"width_mm":22.86,"height_mm":7,"length_mm":50.8},"features":[],"mesh_path":"feather-rp2040.stl","step_path":"feather-rp2040.step","assumptions":["thickness=1.6 mm assumed: PCB thickness is not printed in the guide or fab print; 1.6 mm assumed (the overall 7 mm height is sourced)","feature USB-C + JST envelope (overall height 7 mm): footprint of the tallest parts (USB-C, JST) read from the photo; height = 7 mm overall − 1.6 mm PCB"],"verification":"generated","envelope_complete":false},"other":{},"derived":{},"dimensions":{"other":{},"width_mm":22.86,"length_mm":50.8},"feature_boxes":[{"name":"USB-C + JST envelope (overall height 7 mm)","x_mm":0,"y_mm":6,"other":{},"width_mm":11,"height_mm":5.4,"length_mm":16.5}],"mounting_holes":[{"x_mm":2.54,"y_mm":2.54,"other":{},"diameter_mm":2.5},{"x_mm":48.26,"y_mm":2.54,"other":{},"diameter_mm":2.5},{"x_mm":2.54,"y_mm":20.32,"other":{},"diameter_mm":2.5},{"x_mm":48.26,"y_mm":20.32,"other":{},"diameter_mm":2.5}]},"provides":{"other":{},"memory":{"other":{},"sram_kb":264,"flash_kb":8192,"eeprom_kb":0},"derived":{},"features":["RGB NeoPixel status LED","Built in 200mA lipoly charger with charging status indicator LED","STEMMA QT I2C connector","Reset and BOOTSEL buttons; BOOTSEL readable on GPIO4 (rev D+)","Pin #13 red LED","8 consecutive non-ADC/non-peripheral GPIO for PIO","12 MHz crystal","4 mounting holes"],"wireless":[],"gpio_count":21,"capabilities":[{"notes":"count stated in datasheet (spi_count)","other":{},"protocol":"spi","available":true,"board_pin_ids":["J1-5","J1-6","J1-7","J1-8","J1-9","J1-10","J1-11","J1-12","J1-13","J1-14","J1-15","J1-16","J3-4","J3-5","J3-6","J3-7","J3-8","J3-9","J3-10","J3-11","J3-12"],"instance_count":2},{"notes":"count stated in datasheet (uart_count)","other":{},"protocol":"uart","available":true,"board_pin_ids":["J1-5","J1-6","J1-7","J1-8","J1-9","J1-10","J1-11","J1-12","J1-13","J1-14","J1-15","J1-16","J3-4","J3-5","J3-6","J3-7","J3-8","J3-9","J3-10","J3-11","J3-12"],"instance_count":2},{"other":{},"protocol":"other","available":true,"board_pin_ids":["J1-5","J1-6","J1-7","J1-8","J1-9","J1-10","J1-11","J1-12","J1-13","J1-14","J1-15","J1-16","J3-4","J3-5","J3-6","J3-7","J3-8","J3-9","J3-10","J3-11","J3-12"],"instance_count":1},{"notes":"count stated in datasheet (pwm_channels)","other":{},"protocol":"pwm","available":true,"board_pin_ids":["J1-5","J1-6","J1-7","J1-8","J1-9","J1-10","J1-11","J1-12","J1-13","J1-14","J1-15","J1-16","J3-4","J3-5","J3-6","J3-7","J3-8","J3-9","J3-10","J3-11","J3-12"],"instance_count":16},{"other":{},"protocol":"gpio","available":true,"board_pin_ids":["J1-5","J1-6","J1-7","J1-8","J1-9","J1-10","J1-11","J1-12","J1-13","J1-14","J1-15","J1-16","J3-4","J3-5","J3-6","J3-7","J3-8","J3-9","J3-10","J3-11","J3-12"]},{"other":{},"protocol":"pio","available":true,"board_pin_ids":["J1-5","J1-6","J1-7","J1-8","J1-9","J1-10","J1-11","J1-12","J1-13","J1-14","J1-15","J1-16","J3-4","J3-5","J3-6","J3-7","J3-8","J3-9","J3-10","J3-11","J3-12"],"instance_count":2},{"other":{},"protocol":"usb","available":true,"board_pin_ids":["J1-5","J1-6","J1-7","J1-8","J1-9","J1-10","J1-11","J1-12","J1-13","J1-14","J1-15","J1-16","J3-4","J3-5","J3-6","J3-7","J3-8","J3-9","J3-10","J3-11","J3-12"]},{"notes":"count stated in datasheet (adc_channels)","other":{},"protocol":"adc","available":true,"board_pin_ids":["J1-5","J1-6","J1-7","J1-8"],"instance_count":4},{"notes":"count stated in datasheet (i2c_count)","other":{},"protocol":"i2c","available":true,"board_pin_ids":["J1-9","J1-10","J3-11","J3-12"],"instance_count":2},{"other":{},"protocol":"clock","available":true,"board_pin_ids":["J1-9","J1-10","J1-13"],"instance_count":3},{"other":{},"protocol":"led","available":true,"board_pin_ids":["J3-4"]}],"software_frameworks":["CircuitPython","MicroPython","Arduino"]},"compliance":{"other":{},"derived":{},"certifications":[]},"constraints":{"other":{},"derived":{},"thermal":{"other":{}},"electrical":{"other":{},"io_voltage_v":3.3,"logic_high_min_v":2,"pin_drive_max_ma":12,"supply_voltage_max_v":5,"supply_voltage_min_v":3.7}}},"other":null,"source_type":"pdf","source_ref":"https://cdn-learn.adafruit.com/downloads/pdf/adafruit-feather-rp2040-pico.pdf","datasheet":{"cad":{"bbox":{"max":[50.8,22.86,7],"min":[0,0,0],"width_mm":22.86,"height_mm":7,"length_mm":50.8},"check":{"failed":[],"passed":true},"expected":[{"what":"pcb","width":22.86,"length":50.8,"thickness":1.6},{"d":2.5,"x":2.54,"y":2.54,"axis":"z","name":"M1","what":"hole"},{"d":2.5,"x":48.26,"y":2.54,"axis":"z","name":"M2","what":"hole"},{"d":2.5,"x":2.54,"y":20.32,"axis":"z","name":"M3","what":"hole"},{"d":2.5,"x":48.26,"y":20.32,"axis":"z","name":"M4","what":"hole"}],"archetype":"pcb_board","mesh_path":"/Users/sumeet/Documents/Xirkit Parent/XirkitOnboard/work/feather-rp2040/07_cad/part.stl","step_path":"/Users/sumeet/Documents/Xirkit Parent/XirkitOnboard/work/feather-rp2040/07_cad/part.step","views_png":"/Users/sumeet/Documents/Xirkit Parent/XirkitOnboard/work/feather-rp2040/07_cad/views.png","export_stl":"feather-rp2040.stl","assumptions":["thickness=1.6 mm assumed: PCB thickness is not printed in the guide or fab print; 1.6 mm assumed (the overall 7 mm height is sourced)","feature USB-C + JST envelope (overall height 7 mm): footprint of the tallest parts (USB-C, JST) read from the photo; height = 7 mm overall − 1.6 mm PCB"],"export_step":"feather-rp2040.step","envelope_complete":false},"chips":[{"id":"u1","mpn":"RP2040","src":{"page":8,"quote":"• RP2040 32-bit Cortex M0+ dual core running at ~125 MHz @ 3.3V logic and","method":"text"},"role":"main_processor","manufacturer":"Raspberry Pi"},{"id":"flash","mpn":"W25Q64JVSSIQ","src":{"page":161,"quote":"W25Q64JVSSIQ","figure":"schematic U1","method":"drawing"},"role":"flash_memory","manufacturer":"Winbond"},{"id":"charger","mpn":"MCP73831","src":{"page":161,"quote":"MCP73831/2 LiPo Charger","figure":"schematic U3","method":"drawing"},"role":"battery_charger","manufacturer":"Microchip"},{"id":"neopixel","mpn":"WS2812B","src":{"page":161,"quote":"WS2812B","figure":"schematic","method":"drawing"},"role":"rgb_led","manufacturer":"Worldsemi"}],"fields":{"usb":{"src":{"page":15,"quote":"• USB C connector - This is used for power and data. Connect to your computer","method":"text"},"unit":null,"value":"USB Type-C (RP2040 USB 1.1 device/host)"},"weight":{"src":{"page":8,"quote":"• Light as a (large?) feather - 5 grams","method":"text"},"unit":"g","value":5},"sram_kb":{"src":{"page":8,"quote":"• 264 KB RAM","method":"text"},"orig":{"unit":"KB","value":264},"unit":"KiB","value":264},"flash_kb":{"src":{"page":8,"quote":"8 MB SPI FLASH chip for storing files and CircuitPython/MicroPython code storage.","method":"text"},"orig":{"unit":"MB","value":8},"unit":"KiB","value":8192},"mcu_core":{"src":{"page":8,"quote":"• RP2040 32-bit Cortex M0+ dual core running at ~125 MHz @ 3.3V logic and","method":"text"},"unit":null,"value":"Dual-core Arm Cortex-M0+"},"clock_mhz":{"src":{"page":8,"quote":"running at ~125 MHz @ 3.3V logic and power","method":"text"},"orig":{"unit":"MHz","value":125},"unit":"Hz","value":125000000},"eeprom_kb":{"src":{"page":8,"quote":"storage. No EEPROM","method":"derived"},"orig":{"unit":"KB","value":0},"unit":"KiB","value":0},"i2c_count":{"src":{"page":8,"quote":"Two I2C, Two SPI and two UART peripherals, we label one for the 'main'","method":"text"},"unit":null,"value":2},"spi_count":{"src":{"page":8,"quote":"Two I2C, Two SPI and two UART peripherals, we label one for the 'main'","method":"text"},"unit":null,"value":2},"gpio_count":{"src":{"page":8,"quote":"• Tons of GPIO! 21 x GPIO pins with following capabilities:","method":"text"},"unit":null,"value":21},"io_voltage":{"src":{"page":8,"quote":"@ 3.3V logic and power","method":"text"},"unit":"V","value":3.3},"uart_count":{"src":{"page":8,"quote":"Two I2C, Two SPI and two UART peripherals, we label one for the 'main'","method":"text"},"unit":null,"value":2},"data_inputs":{"src":{"page":15,"quote":"• USB C connector - This is used for power and data. Connect to your computer","method":"text"},"unit":null,"value":["USB-C","SWD"]},"adc_channels":{"src":{"page":8,"quote":"Four 12 bit ADCs (one more than Pico)","method":"derived"},"unit":null,"value":4},"pwm_channels":{"src":{"page":8,"quote":"16 x PWM outputs - for servos, LEDs, etc","method":"text"},"unit":null,"value":16},"internal_gpio":{"src":{"page":161,"quote":"GPIO4 USBBOOT; GPIO13 D13; GPIO16 NEOPIX","figure":"schematic","method":"drawing"},"unit":null,"value":["GPIO4: BOOTSEL button (rev D+)","GPIO13: red LED","GPIO16: NeoPixel"]},"regulator_output":{"src":{"page":16,"quote":"they can supply 500mA peak.","method":"text"},"unit":null,"value":"3.3 V regulator, 500 mA peak"},"adc_resolution_bits":{"src":{"page":8,"quote":"Four 12 bit ADCs (one more than Pico)","method":"text"},"unit":null,"value":12},"software_frameworks":{"src":{"page":8,"quote":"8 MB SPI FLASH chip for storing files and CircuitPython/MicroPython code storage.","method":"text"},"unit":null,"value":["CircuitPython","MicroPython","Arduino"]}},"groups":{"io":["J1-5","J1-6","J1-7","J1-8","J1-9","J1-10","J1-11","J1-12","J1-13","J1-14","J1-15","J1-16","J3-4","J3-5","J3-6","J3-7","J3-8","J3-9","J3-10","J3-11","J3-12"],"all":["J1-1","J1-2","J1-3","J1-4","J1-5","J1-6","J1-7","J1-8","J1-9","J1-10","J1-11","J1-12","J1-13","J1-14","J1-15","J1-16","J3-1","J3-2","J3-3","J3-4","J3-5","J3-6","J3-7","J3-8","J3-9","J3-10","J3-11","J3-12","SWCLK","SWDIO"]},"source":{"url":"https://cdn-learn.adafruit.com/downloads/pdf/adafruit-feather-rp2040-pico.pdf","pages":163,"sha256":"180e8af7193411606706c083ee26be58ec5d0151664f559a8327d7560cff4037","onboarded_at":"2026-09-25T10:46:48+00:00"},"coverage":{"pct":100,"score":"42/42","passed":true,"explained_nulls":["wireless","supply_current","operating_temperature","thickness","component_heights","lifecycle","compliance"]},"entities":[{"id":"J1-1","attrs":{"kind":"control","label":"Rst","number":26,"position":"1","connector":"JP1 (16-pin)","designator":"J1-1","description":"reset; tie to ground to reset the board","power_domain":"IOVDD"},"sources":[{"page":14,"quote":"Rst / back silkscreen Rst","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},{"page":20,"quote":"The RST pin is can be used to reset the board. Tie to ground manually to reset the board.","method":"text","fragment":"entities_pin_descriptions.json"}],"attr_src":{"kind":{"page":14,"quote":"Rst / back silkscreen Rst","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"label":{"page":14,"quote":"Rst / back silkscreen Rst","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"number":{"via":"chip u1 RUN","method":"chip_link"},"position":{"page":14,"quote":"Rst / back silkscreen Rst","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"connector":{"page":14,"quote":"Rst / back silkscreen Rst","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"designator":{"page":14,"quote":"Rst / back silkscreen Rst","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"description":{"page":20,"quote":"The RST pin is can be used to reset the board. Tie to ground manually to reset the board.","method":"text","fragment":"entities_pin_descriptions.json"},"power_domain":{"via":"chip u1 RUN","method":"chip_link"}},"chip_pin":{"pin":"RUN","method":"rule","chip_id":"u1"},"functions":[],"electrical":{"ioh":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOH = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 RUN","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"Output source current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"iol":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOL = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 RUN","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Output sink current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"vih":[{"max":3.6,"min":2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage High @ IOVDD=3.3V | VIH | 2 | IOVDD + 0.3 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 RUN","unit":"V","symbol":"VIH","category":"characteristic","parameter":"Input Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD + 0.3"}],"vil":[{"max":0.8,"min":-0.3,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage Low @ IOVDD=3.3V | VIL | -0.3 | 0.8 | V |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 RUN","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Input Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V"}],"voh":[{"max":3.3,"min":2.62,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage High @ IOVDD=3.3V | VOH | 2.62 | IOVDD | V | IOH = 2, 4, 8 or 12mA depending on setting |","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 RUN","unit":"V","symbol":"VOH","category":"characteristic","parameter":"Output Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting"}],"vol":[{"max":0.5,"min":0,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage Low @ IOVDD=3.3V | VOL | 0 | 0.5 | V | IOL = 2, 4, 8 or 12mA depending on setting |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 RUN","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Output Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 RUN","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 RUN","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 RUN","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 RUN","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":8,"quote":"running at ~125 MHz @ 3.3V logic and power","method":"text","fragment":"ratings_board.json"},"via":"direct","unit":"V","value":3.3,"category":"operating","parameter":"Logic level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 RUN","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.8,"min":-0.5,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 RUN","unit":"V","symbol":"VPIN","category":"absolute_max","parameter":"Voltage at IO (absolute maximum)","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V)"}],"five_volt_tolerant":[{"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |; very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 RUN","value":false,"symbol":"","category":"absolute_max","parameter":"5 V tolerant","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 RUN","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"J1-2","attrs":{"kind":"power_out","label":"3.3V","position":"2","connector":"JP1 (16-pin)","designator":"J1-2"},"sources":[{"page":14,"quote":"3.3V / back silkscreen 3.3V","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"}],"attr_src":{"kind":{"page":14,"quote":"3.3V / back silkscreen 3.3V","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"label":{"page":14,"quote":"3.3V / back silkscreen 3.3V","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"position":{"page":14,"quote":"3.3V / back silkscreen 3.3V","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"connector":{"page":14,"quote":"3.3V / back silkscreen 3.3V","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"designator":{"page":14,"quote":"3.3V / back silkscreen 3.3V","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"}},"functions":[],"electrical":{"output_current":[{"max":0.5,"src":{"page":16,"quote":"they can supply 500mA peak.","method":"text","fragment":"ratings_board.json"},"via":"direct","orig":{"max":500,"unit":"mA"},"unit":"A","category":"operating","parameter":"3.3V regulator peak current","conditions":"peak; not continuously from 5 V (regulator overheats)"}],"output_voltage":[{"src":{"page":16,"quote":"3.3V - These pins are the output from the 3.3V regulator, they can supply 500mA peak.","method":"text","fragment":"ratings_board.json"},"typ":3.3,"via":"direct","unit":"V","category":"operating","parameter":"3.3V regulator output"}]},"entity_type":"pin"},{"id":"J1-3","attrs":{"kind":"power_out","label":"3.3V","position":"3","connector":"JP1 (16-pin)","designator":"J1-3","description":"second 3.3V pad (label spans pads 2–3)"},"sources":[{"page":14,"quote":"3.3V label spans pads 2–3; '3.3V - These pins are the output from the 3.3V regulator'","figure":"Pinouts — top and bottom board photos","method":"derived","fragment":"entities_pinout_photos.json"}],"attr_src":{"kind":{"page":14,"quote":"3.3V label spans pads 2–3; '3.3V - These pins are the output from the 3.3V regulator'","figure":"Pinouts — top and bottom board photos","method":"derived","fragment":"entities_pinout_photos.json"},"label":{"page":14,"quote":"3.3V label spans pads 2–3; '3.3V - These pins are the output from the 3.3V regulator'","figure":"Pinouts — top and bottom board photos","method":"derived","fragment":"entities_pinout_photos.json"},"position":{"page":14,"quote":"3.3V label spans pads 2–3; '3.3V - These pins are the output from the 3.3V regulator'","figure":"Pinouts — top and bottom board photos","method":"derived","fragment":"entities_pinout_photos.json"},"connector":{"page":14,"quote":"3.3V label spans pads 2–3; '3.3V - These pins are the output from the 3.3V regulator'","figure":"Pinouts — top and bottom board photos","method":"derived","fragment":"entities_pinout_photos.json"},"designator":{"page":14,"quote":"3.3V label spans pads 2–3; '3.3V - These pins are the output from the 3.3V regulator'","figure":"Pinouts — top and bottom board photos","method":"derived","fragment":"entities_pinout_photos.json"},"description":{"page":14,"quote":"3.3V label spans pads 2–3; '3.3V - These pins are the output from the 3.3V regulator'","figure":"Pinouts — top and bottom board photos","method":"derived","fragment":"entities_pinout_photos.json"}},"functions":[],"electrical":{"output_current":[{"max":0.5,"src":{"page":16,"quote":"they can supply 500mA peak.","method":"text","fragment":"ratings_board.json"},"via":"direct","orig":{"max":500,"unit":"mA"},"unit":"A","category":"operating","parameter":"3.3V regulator peak current","conditions":"peak; not continuously from 5 V (regulator overheats)"}],"output_voltage":[{"src":{"page":16,"quote":"3.3V - These pins are the output from the 3.3V regulator, they can supply 500mA peak.","method":"text","fragment":"ratings_board.json"},"typ":3.3,"via":"direct","unit":"V","category":"operating","parameter":"3.3V regulator output"}]},"entity_type":"pin"},{"id":"J1-4","attrs":{"kind":"ground","label":"GND","position":"4","connector":"JP1 (16-pin)","designator":"J1-4","description":"common ground for all power and logic"},"sources":[{"page":14,"quote":"GND / back silkscreen GND","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},{"page":15,"quote":"• GND - This is the common ground for all power and logic.","method":"text","fragment":"entities_pin_descriptions.json"}],"attr_src":{"kind":{"page":14,"quote":"GND / back silkscreen GND","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"label":{"page":14,"quote":"GND / back silkscreen GND","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"position":{"page":14,"quote":"GND / back silkscreen GND","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"connector":{"page":14,"quote":"GND / back silkscreen GND","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"designator":{"page":14,"quote":"GND / back silkscreen GND","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"description":{"page":15,"quote":"• GND - This is the common ground for all power and logic.","method":"text","fragment":"entities_pin_descriptions.json"}},"functions":[],"electrical":{},"entity_type":"pin"},{"id":"J1-5","attrs":{"kind":"gpio","label":"A0","number":38,"chip_pin":"GPIO26","position":"5","connector":"JP1 (16-pin)","designator":"J1-5","power_domain":"IOVDD / ADC_AVDD"},"sources":[{"page":14,"quote":"A0 / back silkscreen GP26","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"}],"attr_src":{"kind":{"page":14,"quote":"A0 / back silkscreen GP26","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"label":{"page":14,"quote":"A0 / back silkscreen GP26","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"number":{"via":"chip u1 GPIO26","method":"chip_link"},"chip_pin":{"page":14,"quote":"A0 / back silkscreen GP26","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"position":{"page":14,"quote":"A0 / back silkscreen GP26","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"connector":{"page":14,"quote":"A0 / back silkscreen GP26","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"designator":{"page":14,"quote":"A0 / back silkscreen GP26","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"power_domain":{"via":"chip u1 GPIO26","method":"chip_link"}},"chip_pin":{"pin":"GPIO26","method":"rule","chip_id":"u1"},"functions":[{"alt":"F1","src":{"page":14,"quote":"| 26 | SPI1 SCK | UART1 CTS | I2C1 SDA | PWM5 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO26","signal":"SPI1_SCK","category":"spi","instance":"1","peripheral":"SPI"},{"alt":"F2","src":{"page":14,"quote":"| 26 | SPI1 SCK | UART1 CTS | I2C1 SDA | PWM5 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO26","signal":"UART1_CTS","category":"uart","instance":"1","peripheral":"UART"},{"alt":"F3","src":{"page":14,"quote":"| 26 | SPI1 SCK | UART1 CTS | I2C1 SDA | PWM5 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO26","signal":"I2C1_SDA","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":14,"quote":"| 26 | SPI1 SCK | UART1 CTS | I2C1 SDA | PWM5 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO26","signal":"PWM5_A","category":"pwm","instance":"5","peripheral":"PWM"},{"alt":"F5","src":{"page":14,"quote":"| 26 | SPI1 SCK | UART1 CTS | I2C1 SDA | PWM5 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO26","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":14,"quote":"| 26 | SPI1 SCK | UART1 CTS | I2C1 SDA | PWM5 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO26","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":14,"quote":"| 26 | SPI1 SCK | UART1 CTS | I2C1 SDA | PWM5 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO26","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":14,"quote":"| 26 | SPI1 SCK | UART1 CTS | I2C1 SDA | PWM5 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO26","signal":"USB_VBUS_EN","category":"usb","instance":null,"peripheral":"USB"},{"alt":"analog","src":{"page":14,"quote":"| 26 | SPI1 SCK | UART1 CTS | I2C1 SDA | PWM5 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO26","signal":"ADC0","category":"adc","instance":"0","peripheral":"ADC"}],"electrical":{"ioh":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOH = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO26","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"Output source current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"iol":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOL = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO26","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Output sink current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"vih":[{"max":3.6,"min":2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage High @ IOVDD=3.3V | VIH | 2 | IOVDD + 0.3 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO26","unit":"V","symbol":"VIH","category":"characteristic","parameter":"Input Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD + 0.3"}],"vil":[{"max":0.8,"min":-0.3,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage Low @ IOVDD=3.3V | VIL | -0.3 | 0.8 | V |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO26","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Input Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V"}],"voh":[{"max":3.3,"min":2.62,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage High @ IOVDD=3.3V | VOH | 2.62 | IOVDD | V | IOH = 2, 4, 8 or 12mA depending on setting |","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO26","unit":"V","symbol":"VOH","category":"characteristic","parameter":"Output Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting"}],"vol":[{"max":0.5,"min":0,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage Low @ IOVDD=3.3V | VOL | 0 | 0.5 | V | IOL = 2, 4, 8 or 12mA depending on setting |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO26","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Output Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO26","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":2000,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Human Body Model | HBM | 2 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"615_4"},"via":"chip u1 GPIO26","orig":{"max":2,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO26","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"adc_enob":[{"min":8.7,"src":{"doc":"RP2040 datasheet","page":618,"quote":"| Effective Number of Bits | ENOB | 8.7 |  | bits | See Section 4.9.3 |","method":"table","fragment":"ratings_pads.json","table_id":"618_1"},"via":"chip u1 GPIO26","symbol":"ENOB","category":"characteristic","parameter":"Effective Number of Bits"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO26","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":8,"quote":"running at ~125 MHz @ 3.3V logic and power","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"Logic level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO26","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.8,"min":-0.5,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO26","unit":"V","symbol":"VPIN","category":"absolute_max","parameter":"Voltage at IO (absolute maximum)","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V)"}],"adc_input_range":[{"max":3.3,"min":0,"src":{"doc":"RP2040 datasheet","page":618,"quote":"| ADC Input Voltage Range | VPIN_ADC | 0 | ADC_AVDD | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"618_1"},"via":"chip u1 GPIO26","unit":"V","symbol":"VPIN_ADC","category":"characteristic","parameter":"ADC Input Voltage Range","conditions":"max = ADC_AVDD (3.3 V typ)"}],"five_volt_tolerant":[{"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |; very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO26","value":false,"symbol":"","category":"absolute_max","parameter":"5 V tolerant","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V"}],"adc_input_impedance":[{"min":100000,"src":{"doc":"RP2040 datasheet","page":618,"quote":"| ADC Input Impedance | RIN_ADC | 100 |  | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"618_1"},"via":"chip u1 GPIO26","orig":{"min":100,"unit":"kΩ"},"unit":"ohm","symbol":"RIN_ADC","category":"characteristic","parameter":"ADC Input Impedance"}]},"entity_type":"pin"},{"id":"J1-6","attrs":{"kind":"gpio","label":"A1","number":39,"chip_pin":"GPIO27","position":"6","connector":"JP1 (16-pin)","designator":"J1-6","power_domain":"IOVDD / ADC_AVDD"},"sources":[{"page":14,"quote":"A1 / back silkscreen GP27","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"}],"attr_src":{"kind":{"page":14,"quote":"A1 / back silkscreen GP27","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"label":{"page":14,"quote":"A1 / back silkscreen GP27","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"number":{"via":"chip u1 GPIO27","method":"chip_link"},"chip_pin":{"page":14,"quote":"A1 / back silkscreen GP27","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"position":{"page":14,"quote":"A1 / back silkscreen GP27","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"connector":{"page":14,"quote":"A1 / back silkscreen GP27","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"designator":{"page":14,"quote":"A1 / back silkscreen GP27","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"power_domain":{"via":"chip u1 GPIO27","method":"chip_link"}},"chip_pin":{"pin":"GPIO27","method":"rule","chip_id":"u1"},"functions":[{"alt":"F1","src":{"page":14,"quote":"| 27 | SPI1 TX | UART1 RTS | I2C1 SCL | PWM5 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO27","signal":"SPI1_TX","category":"spi","instance":"1","peripheral":"SPI"},{"alt":"F2","src":{"page":14,"quote":"| 27 | SPI1 TX | UART1 RTS | I2C1 SCL | PWM5 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO27","signal":"UART1_RTS","category":"uart","instance":"1","peripheral":"UART"},{"alt":"F3","src":{"page":14,"quote":"| 27 | SPI1 TX | UART1 RTS | I2C1 SCL | PWM5 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO27","signal":"I2C1_SCL","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":14,"quote":"| 27 | SPI1 TX | UART1 RTS | I2C1 SCL | PWM5 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO27","signal":"PWM5_B","category":"pwm","instance":"5","peripheral":"PWM"},{"alt":"F5","src":{"page":14,"quote":"| 27 | SPI1 TX | UART1 RTS | I2C1 SCL | PWM5 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO27","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":14,"quote":"| 27 | SPI1 TX | UART1 RTS | I2C1 SCL | PWM5 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO27","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":14,"quote":"| 27 | SPI1 TX | UART1 RTS | I2C1 SCL | PWM5 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO27","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":14,"quote":"| 27 | SPI1 TX | UART1 RTS | I2C1 SCL | PWM5 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO27","signal":"USB_OVCUR_DET","category":"usb","instance":null,"peripheral":"USB"},{"alt":"analog","src":{"page":14,"quote":"| 27 | SPI1 TX | UART1 RTS | I2C1 SCL | PWM5 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO27","signal":"ADC1","category":"adc","instance":"1","peripheral":"ADC"}],"electrical":{"ioh":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOH = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO27","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"Output source current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"iol":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOL = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO27","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Output sink current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"vih":[{"max":3.6,"min":2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage High @ IOVDD=3.3V | VIH | 2 | IOVDD + 0.3 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO27","unit":"V","symbol":"VIH","category":"characteristic","parameter":"Input Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD + 0.3"}],"vil":[{"max":0.8,"min":-0.3,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage Low @ IOVDD=3.3V | VIL | -0.3 | 0.8 | V |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO27","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Input Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V"}],"voh":[{"max":3.3,"min":2.62,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage High @ IOVDD=3.3V | VOH | 2.62 | IOVDD | V | IOH = 2, 4, 8 or 12mA depending on setting |","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO27","unit":"V","symbol":"VOH","category":"characteristic","parameter":"Output Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting"}],"vol":[{"max":0.5,"min":0,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage Low @ IOVDD=3.3V | VOL | 0 | 0.5 | V | IOL = 2, 4, 8 or 12mA depending on setting |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO27","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Output Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO27","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":2000,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Human Body Model | HBM | 2 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"615_4"},"via":"chip u1 GPIO27","orig":{"max":2,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO27","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"adc_enob":[{"min":8.7,"src":{"doc":"RP2040 datasheet","page":618,"quote":"| Effective Number of Bits | ENOB | 8.7 |  | bits | See Section 4.9.3 |","method":"table","fragment":"ratings_pads.json","table_id":"618_1"},"via":"chip u1 GPIO27","symbol":"ENOB","category":"characteristic","parameter":"Effective Number of Bits"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO27","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":8,"quote":"running at ~125 MHz @ 3.3V logic and power","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"Logic level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO27","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.8,"min":-0.5,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO27","unit":"V","symbol":"VPIN","category":"absolute_max","parameter":"Voltage at IO (absolute maximum)","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V)"}],"adc_input_range":[{"max":3.3,"min":0,"src":{"doc":"RP2040 datasheet","page":618,"quote":"| ADC Input Voltage Range | VPIN_ADC | 0 | ADC_AVDD | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"618_1"},"via":"chip u1 GPIO27","unit":"V","symbol":"VPIN_ADC","category":"characteristic","parameter":"ADC Input Voltage Range","conditions":"max = ADC_AVDD (3.3 V typ)"}],"five_volt_tolerant":[{"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |; very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO27","value":false,"symbol":"","category":"absolute_max","parameter":"5 V tolerant","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V"}],"adc_input_impedance":[{"min":100000,"src":{"doc":"RP2040 datasheet","page":618,"quote":"| ADC Input Impedance | RIN_ADC | 100 |  | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"618_1"},"via":"chip u1 GPIO27","orig":{"min":100,"unit":"kΩ"},"unit":"ohm","symbol":"RIN_ADC","category":"characteristic","parameter":"ADC Input Impedance"}]},"entity_type":"pin"},{"id":"J1-7","attrs":{"kind":"gpio","label":"A2","number":40,"chip_pin":"GPIO28","position":"7","connector":"JP1 (16-pin)","designator":"J1-7","power_domain":"IOVDD / ADC_AVDD"},"sources":[{"page":14,"quote":"A2 / back silkscreen GP28","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"}],"attr_src":{"kind":{"page":14,"quote":"A2 / back silkscreen GP28","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"label":{"page":14,"quote":"A2 / back silkscreen GP28","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"number":{"via":"chip u1 GPIO28","method":"chip_link"},"chip_pin":{"page":14,"quote":"A2 / back silkscreen GP28","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"position":{"page":14,"quote":"A2 / back silkscreen GP28","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"connector":{"page":14,"quote":"A2 / back silkscreen GP28","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"designator":{"page":14,"quote":"A2 / back silkscreen GP28","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"power_domain":{"via":"chip u1 GPIO28","method":"chip_link"}},"chip_pin":{"pin":"GPIO28","method":"rule","chip_id":"u1"},"functions":[{"alt":"F1","src":{"page":14,"quote":"| 28 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO28","signal":"SPI1_RX","category":"spi","instance":"1","peripheral":"SPI"},{"alt":"F2","src":{"page":14,"quote":"| 28 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO28","signal":"UART0_TX","category":"uart","instance":"0","peripheral":"UART"},{"alt":"F3","src":{"page":14,"quote":"| 28 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO28","signal":"I2C0_SDA","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":14,"quote":"| 28 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO28","signal":"PWM6_A","category":"pwm","instance":"6","peripheral":"PWM"},{"alt":"F5","src":{"page":14,"quote":"| 28 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO28","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":14,"quote":"| 28 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO28","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":14,"quote":"| 28 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO28","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":14,"quote":"| 28 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO28","signal":"USB_VBUS_DET","category":"usb","instance":null,"peripheral":"USB"},{"alt":"analog","src":{"page":14,"quote":"| 28 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO28","signal":"ADC2","category":"adc","instance":"2","peripheral":"ADC"}],"electrical":{"ioh":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOH = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO28","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"Output source current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"iol":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOL = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO28","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Output sink current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"vih":[{"max":3.6,"min":2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage High @ IOVDD=3.3V | VIH | 2 | IOVDD + 0.3 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO28","unit":"V","symbol":"VIH","category":"characteristic","parameter":"Input Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD + 0.3"}],"vil":[{"max":0.8,"min":-0.3,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage Low @ IOVDD=3.3V | VIL | -0.3 | 0.8 | V |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO28","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Input Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V"}],"voh":[{"max":3.3,"min":2.62,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage High @ IOVDD=3.3V | VOH | 2.62 | IOVDD | V | IOH = 2, 4, 8 or 12mA depending on setting |","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO28","unit":"V","symbol":"VOH","category":"characteristic","parameter":"Output Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting"}],"vol":[{"max":0.5,"min":0,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage Low @ IOVDD=3.3V | VOL | 0 | 0.5 | V | IOL = 2, 4, 8 or 12mA depending on setting |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO28","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Output Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO28","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":2000,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Human Body Model | HBM | 2 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"615_4"},"via":"chip u1 GPIO28","orig":{"max":2,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO28","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"adc_enob":[{"min":8.7,"src":{"doc":"RP2040 datasheet","page":618,"quote":"| Effective Number of Bits | ENOB | 8.7 |  | bits | See Section 4.9.3 |","method":"table","fragment":"ratings_pads.json","table_id":"618_1"},"via":"chip u1 GPIO28","symbol":"ENOB","category":"characteristic","parameter":"Effective Number of Bits"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO28","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":8,"quote":"running at ~125 MHz @ 3.3V logic and power","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"Logic level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO28","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.8,"min":-0.5,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO28","unit":"V","symbol":"VPIN","category":"absolute_max","parameter":"Voltage at IO (absolute maximum)","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V)"}],"adc_input_range":[{"max":3.3,"min":0,"src":{"doc":"RP2040 datasheet","page":618,"quote":"| ADC Input Voltage Range | VPIN_ADC | 0 | ADC_AVDD | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"618_1"},"via":"chip u1 GPIO28","unit":"V","symbol":"VPIN_ADC","category":"characteristic","parameter":"ADC Input Voltage Range","conditions":"max = ADC_AVDD (3.3 V typ)"}],"five_volt_tolerant":[{"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |; very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO28","value":false,"symbol":"","category":"absolute_max","parameter":"5 V tolerant","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V"}],"adc_input_impedance":[{"min":100000,"src":{"doc":"RP2040 datasheet","page":618,"quote":"| ADC Input Impedance | RIN_ADC | 100 |  | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"618_1"},"via":"chip u1 GPIO28","orig":{"min":100,"unit":"kΩ"},"unit":"ohm","symbol":"RIN_ADC","category":"characteristic","parameter":"ADC Input Impedance"}]},"entity_type":"pin"},{"id":"J1-8","attrs":{"kind":"gpio","label":"A3","number":41,"chip_pin":"GPIO29","position":"8","connector":"JP1 (16-pin)","designator":"J1-8","power_domain":"IOVDD / ADC_AVDD"},"sources":[{"page":14,"quote":"A3 / back silkscreen GP29","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"}],"attr_src":{"kind":{"page":14,"quote":"A3 / back silkscreen GP29","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"label":{"page":14,"quote":"A3 / back silkscreen GP29","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"number":{"via":"chip u1 GPIO29","method":"chip_link"},"chip_pin":{"page":14,"quote":"A3 / back silkscreen GP29","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"position":{"page":14,"quote":"A3 / back silkscreen GP29","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"connector":{"page":14,"quote":"A3 / back silkscreen GP29","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"designator":{"page":14,"quote":"A3 / back silkscreen GP29","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"power_domain":{"via":"chip u1 GPIO29","method":"chip_link"}},"chip_pin":{"pin":"GPIO29","method":"rule","chip_id":"u1"},"functions":[{"alt":"F1","src":{"page":14,"quote":"| 29 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO29","signal":"SPI1_CSn","category":"spi","instance":"1","peripheral":"SPI"},{"alt":"F2","src":{"page":14,"quote":"| 29 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO29","signal":"UART0_RX","category":"uart","instance":"0","peripheral":"UART"},{"alt":"F3","src":{"page":14,"quote":"| 29 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO29","signal":"I2C0_SCL","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":14,"quote":"| 29 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO29","signal":"PWM6_B","category":"pwm","instance":"6","peripheral":"PWM"},{"alt":"F5","src":{"page":14,"quote":"| 29 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO29","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":14,"quote":"| 29 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO29","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":14,"quote":"| 29 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO29","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":14,"quote":"| 29 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO29","signal":"USB_VBUS_EN","category":"usb","instance":null,"peripheral":"USB"},{"alt":"analog","src":{"page":14,"quote":"| 29 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO29","signal":"ADC3","category":"adc","instance":"3","peripheral":"ADC"}],"electrical":{"ioh":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOH = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO29","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"Output source current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"iol":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOL = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO29","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Output sink current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"vih":[{"max":3.6,"min":2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage High @ IOVDD=3.3V | VIH | 2 | IOVDD + 0.3 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO29","unit":"V","symbol":"VIH","category":"characteristic","parameter":"Input Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD + 0.3"}],"vil":[{"max":0.8,"min":-0.3,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage Low @ IOVDD=3.3V | VIL | -0.3 | 0.8 | V |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO29","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Input Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V"}],"voh":[{"max":3.3,"min":2.62,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage High @ IOVDD=3.3V | VOH | 2.62 | IOVDD | V | IOH = 2, 4, 8 or 12mA depending on setting |","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO29","unit":"V","symbol":"VOH","category":"characteristic","parameter":"Output Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting"}],"vol":[{"max":0.5,"min":0,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage Low @ IOVDD=3.3V | VOL | 0 | 0.5 | V | IOL = 2, 4, 8 or 12mA depending on setting |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO29","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Output Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO29","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":2000,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Human Body Model | HBM | 2 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"615_4"},"via":"chip u1 GPIO29","orig":{"max":2,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO29","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"adc_enob":[{"min":8.7,"src":{"doc":"RP2040 datasheet","page":618,"quote":"| Effective Number of Bits | ENOB | 8.7 |  | bits | See Section 4.9.3 |","method":"table","fragment":"ratings_pads.json","table_id":"618_1"},"via":"chip u1 GPIO29","symbol":"ENOB","category":"characteristic","parameter":"Effective Number of Bits"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO29","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":8,"quote":"running at ~125 MHz @ 3.3V logic and power","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"Logic level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO29","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.8,"min":-0.5,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO29","unit":"V","symbol":"VPIN","category":"absolute_max","parameter":"Voltage at IO (absolute maximum)","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V)"}],"adc_input_range":[{"max":3.3,"min":0,"src":{"doc":"RP2040 datasheet","page":618,"quote":"| ADC Input Voltage Range | VPIN_ADC | 0 | ADC_AVDD | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"618_1"},"via":"chip u1 GPIO29","unit":"V","symbol":"VPIN_ADC","category":"characteristic","parameter":"ADC Input Voltage Range","conditions":"max = ADC_AVDD (3.3 V typ)"}],"five_volt_tolerant":[{"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |; very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO29","value":false,"symbol":"","category":"absolute_max","parameter":"5 V tolerant","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V"}],"adc_input_impedance":[{"min":100000,"src":{"doc":"RP2040 datasheet","page":618,"quote":"| ADC Input Impedance | RIN_ADC | 100 |  | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"618_1"},"via":"chip u1 GPIO29","orig":{"min":100,"unit":"kΩ"},"unit":"ohm","symbol":"RIN_ADC","category":"characteristic","parameter":"ADC Input Impedance"}]},"entity_type":"pin"},{"id":"J1-9","attrs":{"kind":"gpio","label":"D24","number":36,"chip_pin":"GPIO24","position":"9","connector":"JP1 (16-pin)","designator":"J1-9","power_domain":"IOVDD"},"sources":[{"page":14,"quote":"D24 / back silkscreen GP24","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"}],"attr_src":{"kind":{"page":14,"quote":"D24 / back silkscreen GP24","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"label":{"page":14,"quote":"D24 / back silkscreen GP24","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"number":{"via":"chip u1 GPIO24","method":"chip_link"},"chip_pin":{"page":14,"quote":"D24 / back silkscreen GP24","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"position":{"page":14,"quote":"D24 / back silkscreen GP24","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"connector":{"page":14,"quote":"D24 / back silkscreen GP24","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"designator":{"page":14,"quote":"D24 / back silkscreen GP24","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"power_domain":{"via":"chip u1 GPIO24","method":"chip_link"}},"chip_pin":{"pin":"GPIO24","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":18,"quote":"• Wire1 - Pins D24 (data) and D25 (clock) are available as Wire1 .","method":"text","fragment":"functions_board.json"},"signal":"Arduino Wire1 SDA","category":"i2c"},{"alt":"F1","src":{"page":14,"quote":"| 24 | SPI1 RX | UART1 TX | I2C0 SDA | PWM4 A | SIO | PIO0 | PIO1 | CLOCK GPOUT2 | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO24","signal":"SPI1_RX","category":"spi","instance":"1","peripheral":"SPI"},{"alt":"F2","src":{"page":14,"quote":"| 24 | SPI1 RX | UART1 TX | I2C0 SDA | PWM4 A | SIO | PIO0 | PIO1 | CLOCK GPOUT2 | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO24","signal":"UART1_TX","category":"uart","instance":"1","peripheral":"UART"},{"alt":"F3","src":{"page":14,"quote":"| 24 | SPI1 RX | UART1 TX | I2C0 SDA | PWM4 A | SIO | PIO0 | PIO1 | CLOCK GPOUT2 | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO24","signal":"I2C0_SDA","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":14,"quote":"| 24 | SPI1 RX | UART1 TX | I2C0 SDA | PWM4 A | SIO | PIO0 | PIO1 | CLOCK GPOUT2 | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO24","signal":"PWM4_A","category":"pwm","instance":"4","peripheral":"PWM"},{"alt":"F5","src":{"page":14,"quote":"| 24 | SPI1 RX | UART1 TX | I2C0 SDA | PWM4 A | SIO | PIO0 | PIO1 | CLOCK GPOUT2 | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO24","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":14,"quote":"| 24 | SPI1 RX | UART1 TX | I2C0 SDA | PWM4 A | SIO | PIO0 | PIO1 | CLOCK GPOUT2 | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO24","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":14,"quote":"| 24 | SPI1 RX | UART1 TX | I2C0 SDA | PWM4 A | SIO | PIO0 | PIO1 | CLOCK GPOUT2 | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO24","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F8","src":{"page":14,"quote":"| 24 | SPI1 RX | UART1 TX | I2C0 SDA | PWM4 A | SIO | PIO0 | PIO1 | CLOCK GPOUT2 | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO24","signal":"CLOCK_GPOUT2","category":"clock","instance":"2","peripheral":"CLOCK"},{"alt":"F9","src":{"page":14,"quote":"| 24 | SPI1 RX | UART1 TX | I2C0 SDA | PWM4 A | SIO | PIO0 | PIO1 | CLOCK GPOUT2 | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO24","signal":"USB_OVCUR_DET","category":"usb","instance":null,"peripheral":"USB"}],"electrical":{"ioh":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOH = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO24","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"Output source current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"iol":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOL = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO24","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Output sink current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"vih":[{"max":3.6,"min":2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage High @ IOVDD=3.3V | VIH | 2 | IOVDD + 0.3 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO24","unit":"V","symbol":"VIH","category":"characteristic","parameter":"Input Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD + 0.3"}],"vil":[{"max":0.8,"min":-0.3,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage Low @ IOVDD=3.3V | VIL | -0.3 | 0.8 | V |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO24","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Input Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V"}],"voh":[{"max":3.3,"min":2.62,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage High @ IOVDD=3.3V | VOH | 2.62 | IOVDD | V | IOH = 2, 4, 8 or 12mA depending on setting |","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO24","unit":"V","symbol":"VOH","category":"characteristic","parameter":"Output Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting"}],"vol":[{"max":0.5,"min":0,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage Low @ IOVDD=3.3V | VOL | 0 | 0.5 | V | IOL = 2, 4, 8 or 12mA depending on setting |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO24","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Output Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO24","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 GPIO24","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO24","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO24","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":8,"quote":"running at ~125 MHz @ 3.3V logic and power","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"Logic level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO24","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.8,"min":-0.5,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO24","unit":"V","symbol":"VPIN","category":"absolute_max","parameter":"Voltage at IO (absolute maximum)","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V)"}],"five_volt_tolerant":[{"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |; very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO24","value":false,"symbol":"","category":"absolute_max","parameter":"5 V tolerant","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 GPIO24","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"J1-10","attrs":{"kind":"gpio","label":"D25","number":37,"chip_pin":"GPIO25","position":"10","connector":"JP1 (16-pin)","designator":"J1-10","power_domain":"IOVDD"},"sources":[{"page":14,"quote":"D25 / back silkscreen GP25","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"}],"attr_src":{"kind":{"page":14,"quote":"D25 / back silkscreen GP25","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"label":{"page":14,"quote":"D25 / back silkscreen GP25","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"number":{"via":"chip u1 GPIO25","method":"chip_link"},"chip_pin":{"page":14,"quote":"D25 / back silkscreen GP25","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"position":{"page":14,"quote":"D25 / back silkscreen GP25","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"connector":{"page":14,"quote":"D25 / back silkscreen GP25","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"designator":{"page":14,"quote":"D25 / back silkscreen GP25","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"power_domain":{"via":"chip u1 GPIO25","method":"chip_link"}},"chip_pin":{"pin":"GPIO25","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":18,"quote":"• Wire1 - Pins D24 (data) and D25 (clock) are available as Wire1 .","method":"text","fragment":"functions_board.json"},"signal":"Arduino Wire1 SCL","category":"i2c"},{"alt":"F1","src":{"page":14,"quote":"| 25 | SPI1 CSn | UART1 RX | I2C0 SCL | PWM4 B | SIO | PIO0 | PIO1 | CLOCK GPOUT3 | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO25","signal":"SPI1_CSn","category":"spi","instance":"1","peripheral":"SPI"},{"alt":"F2","src":{"page":14,"quote":"| 25 | SPI1 CSn | UART1 RX | I2C0 SCL | PWM4 B | SIO | PIO0 | PIO1 | CLOCK GPOUT3 | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO25","signal":"UART1_RX","category":"uart","instance":"1","peripheral":"UART"},{"alt":"F3","src":{"page":14,"quote":"| 25 | SPI1 CSn | UART1 RX | I2C0 SCL | PWM4 B | SIO | PIO0 | PIO1 | CLOCK GPOUT3 | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO25","signal":"I2C0_SCL","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":14,"quote":"| 25 | SPI1 CSn | UART1 RX | I2C0 SCL | PWM4 B | SIO | PIO0 | PIO1 | CLOCK GPOUT3 | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO25","signal":"PWM4_B","category":"pwm","instance":"4","peripheral":"PWM"},{"alt":"F5","src":{"page":14,"quote":"| 25 | SPI1 CSn | UART1 RX | I2C0 SCL | PWM4 B | SIO | PIO0 | PIO1 | CLOCK GPOUT3 | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO25","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":14,"quote":"| 25 | SPI1 CSn | UART1 RX | I2C0 SCL | PWM4 B | SIO | PIO0 | PIO1 | CLOCK GPOUT3 | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO25","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":14,"quote":"| 25 | SPI1 CSn | UART1 RX | I2C0 SCL | PWM4 B | SIO | PIO0 | PIO1 | CLOCK GPOUT3 | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO25","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F8","src":{"page":14,"quote":"| 25 | SPI1 CSn | UART1 RX | I2C0 SCL | PWM4 B | SIO | PIO0 | PIO1 | CLOCK GPOUT3 | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO25","signal":"CLOCK_GPOUT3","category":"clock","instance":"3","peripheral":"CLOCK"},{"alt":"F9","src":{"page":14,"quote":"| 25 | SPI1 CSn | UART1 RX | I2C0 SCL | PWM4 B | SIO | PIO0 | PIO1 | CLOCK GPOUT3 | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO25","signal":"USB_VBUS_DET","category":"usb","instance":null,"peripheral":"USB"}],"electrical":{"ioh":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOH = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO25","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"Output source current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"iol":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOL = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO25","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Output sink current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"vih":[{"max":3.6,"min":2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage High @ IOVDD=3.3V | VIH | 2 | IOVDD + 0.3 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO25","unit":"V","symbol":"VIH","category":"characteristic","parameter":"Input Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD + 0.3"}],"vil":[{"max":0.8,"min":-0.3,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage Low @ IOVDD=3.3V | VIL | -0.3 | 0.8 | V |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO25","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Input Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V"}],"voh":[{"max":3.3,"min":2.62,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage High @ IOVDD=3.3V | VOH | 2.62 | IOVDD | V | IOH = 2, 4, 8 or 12mA depending on setting |","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO25","unit":"V","symbol":"VOH","category":"characteristic","parameter":"Output Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting"}],"vol":[{"max":0.5,"min":0,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage Low @ IOVDD=3.3V | VOL | 0 | 0.5 | V | IOL = 2, 4, 8 or 12mA depending on setting |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO25","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Output Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO25","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 GPIO25","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO25","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO25","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":8,"quote":"running at ~125 MHz @ 3.3V logic and power","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"Logic level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO25","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.8,"min":-0.5,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO25","unit":"V","symbol":"VPIN","category":"absolute_max","parameter":"Voltage at IO (absolute maximum)","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V)"}],"five_volt_tolerant":[{"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |; very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO25","value":false,"symbol":"","category":"absolute_max","parameter":"5 V tolerant","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 GPIO25","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"J1-11","attrs":{"kind":"gpio","label":"SCK","number":29,"chip_pin":"GPIO18","position":"11","connector":"JP1 (16-pin)","designator":"J1-11","power_domain":"IOVDD"},"sources":[{"page":14,"quote":"SCK / back silkscreen GP18","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"}],"attr_src":{"kind":{"page":14,"quote":"SCK / back silkscreen GP18","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"label":{"page":14,"quote":"SCK / back silkscreen GP18","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"number":{"via":"chip u1 GPIO18","method":"chip_link"},"chip_pin":{"page":14,"quote":"SCK / back silkscreen GP18","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"position":{"page":14,"quote":"SCK / back silkscreen GP18","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"connector":{"page":14,"quote":"SCK / back silkscreen GP18","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"designator":{"page":14,"quote":"SCK / back silkscreen GP18","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"power_domain":{"via":"chip u1 GPIO18","method":"chip_link"}},"chip_pin":{"pin":"GPIO18","method":"rule","chip_id":"u1"},"functions":[{"alt":"F1","src":{"page":13,"quote":"| 18 | SPI0 SCK | UART0 CTS | I2C1 SDA | PWM1 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO18","signal":"SPI0_SCK","category":"spi","instance":"0","peripheral":"SPI"},{"alt":"F2","src":{"page":13,"quote":"| 18 | SPI0 SCK | UART0 CTS | I2C1 SDA | PWM1 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO18","signal":"UART0_CTS","category":"uart","instance":"0","peripheral":"UART"},{"alt":"F3","src":{"page":13,"quote":"| 18 | SPI0 SCK | UART0 CTS | I2C1 SDA | PWM1 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO18","signal":"I2C1_SDA","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":13,"quote":"| 18 | SPI0 SCK | UART0 CTS | I2C1 SDA | PWM1 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO18","signal":"PWM1_A","category":"pwm","instance":"1","peripheral":"PWM"},{"alt":"F5","src":{"page":13,"quote":"| 18 | SPI0 SCK | UART0 CTS | I2C1 SDA | PWM1 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO18","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":13,"quote":"| 18 | SPI0 SCK | UART0 CTS | I2C1 SDA | PWM1 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO18","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":13,"quote":"| 18 | SPI0 SCK | UART0 CTS | I2C1 SDA | PWM1 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO18","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":13,"quote":"| 18 | SPI0 SCK | UART0 CTS | I2C1 SDA | PWM1 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO18","signal":"USB_OVCUR_DET","category":"usb","instance":null,"peripheral":"USB"}],"electrical":{"ioh":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOH = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO18","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"Output source current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"iol":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOL = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO18","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Output sink current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"vih":[{"max":3.6,"min":2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage High @ IOVDD=3.3V | VIH | 2 | IOVDD + 0.3 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO18","unit":"V","symbol":"VIH","category":"characteristic","parameter":"Input Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD + 0.3"}],"vil":[{"max":0.8,"min":-0.3,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage Low @ IOVDD=3.3V | VIL | -0.3 | 0.8 | V |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO18","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Input Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V"}],"voh":[{"max":3.3,"min":2.62,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage High @ IOVDD=3.3V | VOH | 2.62 | IOVDD | V | IOH = 2, 4, 8 or 12mA depending on setting |","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO18","unit":"V","symbol":"VOH","category":"characteristic","parameter":"Output Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting"}],"vol":[{"max":0.5,"min":0,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage Low @ IOVDD=3.3V | VOL | 0 | 0.5 | V | IOL = 2, 4, 8 or 12mA depending on setting |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO18","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Output Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO18","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 GPIO18","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO18","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO18","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":8,"quote":"running at ~125 MHz @ 3.3V logic and power","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"Logic level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO18","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.8,"min":-0.5,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO18","unit":"V","symbol":"VPIN","category":"absolute_max","parameter":"Voltage at IO (absolute maximum)","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V)"}],"five_volt_tolerant":[{"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |; very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO18","value":false,"symbol":"","category":"absolute_max","parameter":"5 V tolerant","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 GPIO18","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"J1-12","attrs":{"kind":"gpio","label":"MO","number":30,"chip_pin":"GPIO19","position":"12","connector":"JP1 (16-pin)","designator":"J1-12","power_domain":"IOVDD"},"sources":[{"page":14,"quote":"MO / back silkscreen GP19","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"}],"attr_src":{"kind":{"page":14,"quote":"MO / back silkscreen GP19","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"label":{"page":14,"quote":"MO / back silkscreen GP19","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"number":{"via":"chip u1 GPIO19","method":"chip_link"},"chip_pin":{"page":14,"quote":"MO / back silkscreen GP19","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"position":{"page":14,"quote":"MO / back silkscreen GP19","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"connector":{"page":14,"quote":"MO / back silkscreen GP19","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"designator":{"page":14,"quote":"MO / back silkscreen GP19","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"power_domain":{"via":"chip u1 GPIO19","method":"chip_link"}},"chip_pin":{"pin":"GPIO19","method":"rule","chip_id":"u1"},"functions":[{"alt":"F1","src":{"page":13,"quote":"| 19 | SPI0 TX | UART0 RTS | I2C1 SCL | PWM1 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO19","signal":"SPI0_TX","category":"spi","instance":"0","peripheral":"SPI"},{"alt":"F2","src":{"page":13,"quote":"| 19 | SPI0 TX | UART0 RTS | I2C1 SCL | PWM1 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO19","signal":"UART0_RTS","category":"uart","instance":"0","peripheral":"UART"},{"alt":"F3","src":{"page":13,"quote":"| 19 | SPI0 TX | UART0 RTS | I2C1 SCL | PWM1 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO19","signal":"I2C1_SCL","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":13,"quote":"| 19 | SPI0 TX | UART0 RTS | I2C1 SCL | PWM1 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO19","signal":"PWM1_B","category":"pwm","instance":"1","peripheral":"PWM"},{"alt":"F5","src":{"page":13,"quote":"| 19 | SPI0 TX | UART0 RTS | I2C1 SCL | PWM1 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO19","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":13,"quote":"| 19 | SPI0 TX | UART0 RTS | I2C1 SCL | PWM1 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO19","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":13,"quote":"| 19 | SPI0 TX | UART0 RTS | I2C1 SCL | PWM1 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO19","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":13,"quote":"| 19 | SPI0 TX | UART0 RTS | I2C1 SCL | PWM1 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO19","signal":"USB_VBUS_DET","category":"usb","instance":null,"peripheral":"USB"}],"electrical":{"ioh":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOH = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO19","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"Output source current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"iol":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOL = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO19","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Output sink current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"vih":[{"max":3.6,"min":2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage High @ IOVDD=3.3V | VIH | 2 | IOVDD + 0.3 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO19","unit":"V","symbol":"VIH","category":"characteristic","parameter":"Input Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD + 0.3"}],"vil":[{"max":0.8,"min":-0.3,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage Low @ IOVDD=3.3V | VIL | -0.3 | 0.8 | V |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO19","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Input Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V"}],"voh":[{"max":3.3,"min":2.62,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage High @ IOVDD=3.3V | VOH | 2.62 | IOVDD | V | IOH = 2, 4, 8 or 12mA depending on setting |","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO19","unit":"V","symbol":"VOH","category":"characteristic","parameter":"Output Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting"}],"vol":[{"max":0.5,"min":0,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage Low @ IOVDD=3.3V | VOL | 0 | 0.5 | V | IOL = 2, 4, 8 or 12mA depending on setting |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO19","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Output Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO19","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 GPIO19","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO19","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO19","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":8,"quote":"running at ~125 MHz @ 3.3V logic and power","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"Logic level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO19","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.8,"min":-0.5,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO19","unit":"V","symbol":"VPIN","category":"absolute_max","parameter":"Voltage at IO (absolute maximum)","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V)"}],"five_volt_tolerant":[{"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |; very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO19","value":false,"symbol":"","category":"absolute_max","parameter":"5 V tolerant","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 GPIO19","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"J1-13","attrs":{"kind":"gpio","label":"MI","number":31,"chip_pin":"GPIO20","position":"13","connector":"JP1 (16-pin)","designator":"J1-13","power_domain":"IOVDD"},"sources":[{"page":14,"quote":"MI / back silkscreen GP20","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"}],"attr_src":{"kind":{"page":14,"quote":"MI / back silkscreen GP20","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"label":{"page":14,"quote":"MI / back silkscreen GP20","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"number":{"via":"chip u1 GPIO20","method":"chip_link"},"chip_pin":{"page":14,"quote":"MI / back silkscreen GP20","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"position":{"page":14,"quote":"MI / back silkscreen GP20","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"connector":{"page":14,"quote":"MI / back silkscreen GP20","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"designator":{"page":14,"quote":"MI / back silkscreen GP20","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"power_domain":{"via":"chip u1 GPIO20","method":"chip_link"}},"chip_pin":{"pin":"GPIO20","method":"rule","chip_id":"u1"},"functions":[{"alt":"F1","src":{"page":13,"quote":"| 20 | SPI0 RX | UART1 TX | I2C0 SDA | PWM2 A | SIO | PIO0 | PIO1 | CLOCK GPIN0 | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO20","signal":"SPI0_RX","category":"spi","instance":"0","peripheral":"SPI"},{"alt":"F2","src":{"page":13,"quote":"| 20 | SPI0 RX | UART1 TX | I2C0 SDA | PWM2 A | SIO | PIO0 | PIO1 | CLOCK GPIN0 | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO20","signal":"UART1_TX","category":"uart","instance":"1","peripheral":"UART"},{"alt":"F3","src":{"page":13,"quote":"| 20 | SPI0 RX | UART1 TX | I2C0 SDA | PWM2 A | SIO | PIO0 | PIO1 | CLOCK GPIN0 | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO20","signal":"I2C0_SDA","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":13,"quote":"| 20 | SPI0 RX | UART1 TX | I2C0 SDA | PWM2 A | SIO | PIO0 | PIO1 | CLOCK GPIN0 | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO20","signal":"PWM2_A","category":"pwm","instance":"2","peripheral":"PWM"},{"alt":"F5","src":{"page":13,"quote":"| 20 | SPI0 RX | UART1 TX | I2C0 SDA | PWM2 A | SIO | PIO0 | PIO1 | CLOCK GPIN0 | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO20","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":13,"quote":"| 20 | SPI0 RX | UART1 TX | I2C0 SDA | PWM2 A | SIO | PIO0 | PIO1 | CLOCK GPIN0 | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO20","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":13,"quote":"| 20 | SPI0 RX | UART1 TX | I2C0 SDA | PWM2 A | SIO | PIO0 | PIO1 | CLOCK GPIN0 | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO20","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F8","src":{"page":13,"quote":"| 20 | SPI0 RX | UART1 TX | I2C0 SDA | PWM2 A | SIO | PIO0 | PIO1 | CLOCK GPIN0 | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO20","signal":"CLOCK_GPIN0","category":"clock","instance":"0","peripheral":"CLOCK"},{"alt":"F9","src":{"page":13,"quote":"| 20 | SPI0 RX | UART1 TX | I2C0 SDA | PWM2 A | SIO | PIO0 | PIO1 | CLOCK GPIN0 | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO20","signal":"USB_VBUS_EN","category":"usb","instance":null,"peripheral":"USB"}],"electrical":{"ioh":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOH = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO20","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"Output source current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"iol":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOL = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO20","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Output sink current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"vih":[{"max":3.6,"min":2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage High @ IOVDD=3.3V | VIH | 2 | IOVDD + 0.3 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO20","unit":"V","symbol":"VIH","category":"characteristic","parameter":"Input Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD + 0.3"}],"vil":[{"max":0.8,"min":-0.3,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage Low @ IOVDD=3.3V | VIL | -0.3 | 0.8 | V |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO20","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Input Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V"}],"voh":[{"max":3.3,"min":2.62,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage High @ IOVDD=3.3V | VOH | 2.62 | IOVDD | V | IOH = 2, 4, 8 or 12mA depending on setting |","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO20","unit":"V","symbol":"VOH","category":"characteristic","parameter":"Output Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting"}],"vol":[{"max":0.5,"min":0,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage Low @ IOVDD=3.3V | VOL | 0 | 0.5 | V | IOL = 2, 4, 8 or 12mA depending on setting |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO20","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Output Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO20","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 GPIO20","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO20","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO20","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":8,"quote":"running at ~125 MHz @ 3.3V logic and power","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"Logic level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO20","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.8,"min":-0.5,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO20","unit":"V","symbol":"VPIN","category":"absolute_max","parameter":"Voltage at IO (absolute maximum)","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V)"}],"five_volt_tolerant":[{"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |; very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO20","value":false,"symbol":"","category":"absolute_max","parameter":"5 V tolerant","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 GPIO20","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"J1-14","attrs":{"kind":"gpio","label":"RX","number":3,"chip_pin":"GPIO1","position":"14","connector":"JP1 (16-pin)","designator":"J1-14","power_domain":"IOVDD"},"sources":[{"page":14,"quote":"RX / back silkscreen GP01","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"}],"attr_src":{"kind":{"page":14,"quote":"RX / back silkscreen GP01","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"label":{"page":14,"quote":"RX / back silkscreen GP01","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"number":{"via":"chip u1 GPIO1","method":"chip_link"},"chip_pin":{"page":14,"quote":"RX / back silkscreen GP01","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"position":{"page":14,"quote":"RX / back silkscreen GP01","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"connector":{"page":14,"quote":"RX / back silkscreen GP01","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"designator":{"page":14,"quote":"RX / back silkscreen GP01","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"power_domain":{"via":"chip u1 GPIO1","method":"chip_link"}},"chip_pin":{"pin":"GPIO1","method":"rule","chip_id":"u1"},"functions":[{"alt":"F1","src":{"page":13,"quote":"| 1 | SPI0 CSn | UART0 RX | I2C0 SCL | PWM0 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO1","signal":"SPI0_CSn","category":"spi","instance":"0","peripheral":"SPI"},{"alt":"F2","src":{"page":13,"quote":"| 1 | SPI0 CSn | UART0 RX | I2C0 SCL | PWM0 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO1","signal":"UART0_RX","category":"uart","instance":"0","peripheral":"UART"},{"alt":"F3","src":{"page":13,"quote":"| 1 | SPI0 CSn | UART0 RX | I2C0 SCL | PWM0 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO1","signal":"I2C0_SCL","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":13,"quote":"| 1 | SPI0 CSn | UART0 RX | I2C0 SCL | PWM0 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO1","signal":"PWM0_B","category":"pwm","instance":"0","peripheral":"PWM"},{"alt":"F5","src":{"page":13,"quote":"| 1 | SPI0 CSn | UART0 RX | I2C0 SCL | PWM0 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO1","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":13,"quote":"| 1 | SPI0 CSn | UART0 RX | I2C0 SCL | PWM0 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO1","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":13,"quote":"| 1 | SPI0 CSn | UART0 RX | I2C0 SCL | PWM0 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO1","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":13,"quote":"| 1 | SPI0 CSn | UART0 RX | I2C0 SCL | PWM0 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO1","signal":"USB_VBUS_DET","category":"usb","instance":null,"peripheral":"USB"}],"electrical":{"ioh":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOH = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO1","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"Output source current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"iol":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOL = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO1","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Output sink current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"vih":[{"max":3.6,"min":2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage High @ IOVDD=3.3V | VIH | 2 | IOVDD + 0.3 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO1","unit":"V","symbol":"VIH","category":"characteristic","parameter":"Input Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD + 0.3"}],"vil":[{"max":0.8,"min":-0.3,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage Low @ IOVDD=3.3V | VIL | -0.3 | 0.8 | V |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO1","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Input Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V"}],"voh":[{"max":3.3,"min":2.62,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage High @ IOVDD=3.3V | VOH | 2.62 | IOVDD | V | IOH = 2, 4, 8 or 12mA depending on setting |","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO1","unit":"V","symbol":"VOH","category":"characteristic","parameter":"Output Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting"}],"vol":[{"max":0.5,"min":0,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage Low @ IOVDD=3.3V | VOL | 0 | 0.5 | V | IOL = 2, 4, 8 or 12mA depending on setting |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO1","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Output Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO1","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 GPIO1","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO1","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO1","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":8,"quote":"running at ~125 MHz @ 3.3V logic and power","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"Logic level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO1","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.8,"min":-0.5,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO1","unit":"V","symbol":"VPIN","category":"absolute_max","parameter":"Voltage at IO (absolute maximum)","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V)"}],"five_volt_tolerant":[{"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |; very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO1","value":false,"symbol":"","category":"absolute_max","parameter":"5 V tolerant","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 GPIO1","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"J1-15","attrs":{"kind":"gpio","label":"TX","number":2,"chip_pin":"GPIO0","position":"15","connector":"JP1 (16-pin)","designator":"J1-15","power_domain":"IOVDD"},"sources":[{"page":14,"quote":"TX / back silkscreen GP00","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"}],"attr_src":{"kind":{"page":14,"quote":"TX / back silkscreen GP00","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"label":{"page":14,"quote":"TX / back silkscreen GP00","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"number":{"via":"chip u1 GPIO0","method":"chip_link"},"chip_pin":{"page":14,"quote":"TX / back silkscreen GP00","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"position":{"page":14,"quote":"TX / back silkscreen GP00","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"connector":{"page":14,"quote":"TX / back silkscreen GP00","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"designator":{"page":14,"quote":"TX / back silkscreen GP00","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"power_domain":{"via":"chip u1 GPIO0","method":"chip_link"}},"chip_pin":{"pin":"GPIO0","method":"rule","chip_id":"u1"},"functions":[{"alt":"F1","src":{"page":13,"quote":"| 0 | SPI0 RX | UART0 TX | I2C0 SDA | PWM0 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO0","signal":"SPI0_RX","category":"spi","instance":"0","peripheral":"SPI"},{"alt":"F2","src":{"page":13,"quote":"| 0 | SPI0 RX | UART0 TX | I2C0 SDA | PWM0 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO0","signal":"UART0_TX","category":"uart","instance":"0","peripheral":"UART"},{"alt":"F3","src":{"page":13,"quote":"| 0 | SPI0 RX | UART0 TX | I2C0 SDA | PWM0 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO0","signal":"I2C0_SDA","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":13,"quote":"| 0 | SPI0 RX | UART0 TX | I2C0 SDA | PWM0 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO0","signal":"PWM0_A","category":"pwm","instance":"0","peripheral":"PWM"},{"alt":"F5","src":{"page":13,"quote":"| 0 | SPI0 RX | UART0 TX | I2C0 SDA | PWM0 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO0","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":13,"quote":"| 0 | SPI0 RX | UART0 TX | I2C0 SDA | PWM0 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO0","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":13,"quote":"| 0 | SPI0 RX | UART0 TX | I2C0 SDA | PWM0 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO0","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":13,"quote":"| 0 | SPI0 RX | UART0 TX | I2C0 SDA | PWM0 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO0","signal":"USB_OVCUR_DET","category":"usb","instance":null,"peripheral":"USB"}],"electrical":{"ioh":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOH = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO0","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"Output source current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"iol":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOL = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO0","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Output sink current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"vih":[{"max":3.6,"min":2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage High @ IOVDD=3.3V | VIH | 2 | IOVDD + 0.3 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO0","unit":"V","symbol":"VIH","category":"characteristic","parameter":"Input Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD + 0.3"}],"vil":[{"max":0.8,"min":-0.3,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage Low @ IOVDD=3.3V | VIL | -0.3 | 0.8 | V |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO0","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Input Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V"}],"voh":[{"max":3.3,"min":2.62,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage High @ IOVDD=3.3V | VOH | 2.62 | IOVDD | V | IOH = 2, 4, 8 or 12mA depending on setting |","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO0","unit":"V","symbol":"VOH","category":"characteristic","parameter":"Output Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting"}],"vol":[{"max":0.5,"min":0,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage Low @ IOVDD=3.3V | VOL | 0 | 0.5 | V | IOL = 2, 4, 8 or 12mA depending on setting |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO0","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Output Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO0","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 GPIO0","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO0","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO0","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":8,"quote":"running at ~125 MHz @ 3.3V logic and power","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"Logic level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO0","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.8,"min":-0.5,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO0","unit":"V","symbol":"VPIN","category":"absolute_max","parameter":"Voltage at IO (absolute maximum)","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V)"}],"five_volt_tolerant":[{"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |; very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO0","value":false,"symbol":"","category":"absolute_max","parameter":"5 V tolerant","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 GPIO0","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"J1-16","attrs":{"kind":"gpio","label":"D4","number":8,"chip_pin":"GPIO6","position":"16","connector":"JP1 (16-pin)","designator":"J1-16","power_domain":"IOVDD"},"sources":[{"page":14,"quote":"D4 / back silkscreen GP06","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"}],"attr_src":{"kind":{"page":14,"quote":"D4 / back silkscreen GP06","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"label":{"page":14,"quote":"D4 / back silkscreen GP06","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"number":{"via":"chip u1 GPIO6","method":"chip_link"},"chip_pin":{"page":14,"quote":"D4 / back silkscreen GP06","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"position":{"page":14,"quote":"D4 / back silkscreen GP06","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"connector":{"page":14,"quote":"D4 / back silkscreen GP06","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"designator":{"page":14,"quote":"D4 / back silkscreen GP06","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"power_domain":{"via":"chip u1 GPIO6","method":"chip_link"}},"chip_pin":{"pin":"GPIO6","method":"rule","chip_id":"u1"},"functions":[{"alt":"F1","src":{"page":13,"quote":"| 6 | SPI0 SCK | UART1 CTS | I2C1 SDA | PWM3 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO6","signal":"SPI0_SCK","category":"spi","instance":"0","peripheral":"SPI"},{"alt":"F2","src":{"page":13,"quote":"| 6 | SPI0 SCK | UART1 CTS | I2C1 SDA | PWM3 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO6","signal":"UART1_CTS","category":"uart","instance":"1","peripheral":"UART"},{"alt":"F3","src":{"page":13,"quote":"| 6 | SPI0 SCK | UART1 CTS | I2C1 SDA | PWM3 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO6","signal":"I2C1_SDA","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":13,"quote":"| 6 | SPI0 SCK | UART1 CTS | I2C1 SDA | PWM3 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO6","signal":"PWM3_A","category":"pwm","instance":"3","peripheral":"PWM"},{"alt":"F5","src":{"page":13,"quote":"| 6 | SPI0 SCK | UART1 CTS | I2C1 SDA | PWM3 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO6","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":13,"quote":"| 6 | SPI0 SCK | UART1 CTS | I2C1 SDA | PWM3 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO6","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":13,"quote":"| 6 | SPI0 SCK | UART1 CTS | I2C1 SDA | PWM3 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO6","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":13,"quote":"| 6 | SPI0 SCK | UART1 CTS | I2C1 SDA | PWM3 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO6","signal":"USB_OVCUR_DET","category":"usb","instance":null,"peripheral":"USB"}],"electrical":{"ioh":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOH = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO6","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"Output source current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"iol":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOL = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO6","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Output sink current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"vih":[{"max":3.6,"min":2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage High @ IOVDD=3.3V | VIH | 2 | IOVDD + 0.3 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO6","unit":"V","symbol":"VIH","category":"characteristic","parameter":"Input Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD + 0.3"}],"vil":[{"max":0.8,"min":-0.3,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage Low @ IOVDD=3.3V | VIL | -0.3 | 0.8 | V |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO6","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Input Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V"}],"voh":[{"max":3.3,"min":2.62,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage High @ IOVDD=3.3V | VOH | 2.62 | IOVDD | V | IOH = 2, 4, 8 or 12mA depending on setting |","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO6","unit":"V","symbol":"VOH","category":"characteristic","parameter":"Output Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting"}],"vol":[{"max":0.5,"min":0,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage Low @ IOVDD=3.3V | VOL | 0 | 0.5 | V | IOL = 2, 4, 8 or 12mA depending on setting |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO6","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Output Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO6","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 GPIO6","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO6","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO6","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":8,"quote":"running at ~125 MHz @ 3.3V logic and power","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"Logic level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO6","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.8,"min":-0.5,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO6","unit":"V","symbol":"VPIN","category":"absolute_max","parameter":"Voltage at IO (absolute maximum)","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V)"}],"five_volt_tolerant":[{"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |; very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO6","value":false,"symbol":"","category":"absolute_max","parameter":"5 V tolerant","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 GPIO6","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"J3-1","attrs":{"kind":"power_in","label":"BAT","position":"1","connector":"JP3 (12-pin)","designator":"J3-1","description":"positive voltage to/from the 2-pin JST jack for the optional Lipoly battery"},"sources":[{"page":14,"quote":"BAT / back silkscreen BAT","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},{"page":15,"quote":"BAT - This is the positive voltage to/from the 2-pin JST jack for the optional Lipoly battery.","method":"text","fragment":"entities_pin_descriptions.json"}],"attr_src":{"kind":{"page":14,"quote":"BAT / back silkscreen BAT","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"label":{"page":14,"quote":"BAT / back silkscreen BAT","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"position":{"page":14,"quote":"BAT / back silkscreen BAT","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"connector":{"page":14,"quote":"BAT / back silkscreen BAT","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"designator":{"page":14,"quote":"BAT / back silkscreen BAT","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"description":{"page":15,"quote":"BAT - This is the positive voltage to/from the 2-pin JST jack for the optional Lipoly battery.","method":"text","fragment":"entities_pin_descriptions.json"}},"functions":[],"electrical":{"input_voltage":[{"max":4.2,"src":{"page":35,"quote":"You can also connect a 4.2/3.7V Lithium Polymer (LiPo/LiPoly) or Lithium Ion (LiIon) battery to the JST jack.","method":"text","fragment":"ratings_board.json"},"typ":3.7,"via":"direct","unit":"V","category":"operating","parameter":"LiPoly / LiIon battery","conditions":"3.7 V nominal, 4.2 V full, ~3.2 V cut-off"}],"charge_current":[{"src":{"page":8,"quote":"• Built in 200mA lipoly charger with charging status indicator LED","method":"text","fragment":"ratings_board.json"},"typ":0.2,"via":"direct","orig":{"typ":200,"unit":"mA"},"unit":"A","category":"operating","parameter":"LiPoly charger"}]},"entity_type":"pin"},{"id":"J3-2","attrs":{"kind":"control","label":"EN","position":"2","connector":"JP3 (12-pin)","designator":"J3-2","description":"3.3V regulator enable, pulled up; connect to ground to disable"},"sources":[{"page":14,"quote":"EN / back silkscreen EN","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},{"page":16,"quote":"EN - This is the 3.3V regulator's enable pin. It's pulled up, so connect to ground to disable the 3.3V regulator.","method":"text","fragment":"entities_pin_descriptions.json"}],"attr_src":{"kind":{"page":14,"quote":"EN / back silkscreen EN","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"label":{"page":14,"quote":"EN / back silkscreen EN","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"position":{"page":14,"quote":"EN / back silkscreen EN","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"connector":{"page":14,"quote":"EN / back silkscreen EN","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"designator":{"page":14,"quote":"EN / back silkscreen EN","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"description":{"page":16,"quote":"EN - This is the 3.3V regulator's enable pin. It's pulled up, so connect to ground to disable the 3.3V regulator.","method":"text","fragment":"entities_pin_descriptions.json"}},"functions":[],"electrical":{},"entity_type":"pin"},{"id":"J3-3","attrs":{"kind":"power_in","label":"USB","position":"3","connector":"JP3 (12-pin)","designator":"J3-3","description":"positive voltage to/from the USB C jack, if USB is connected"},"sources":[{"page":14,"quote":"USB / back silkscreen USB","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},{"page":15,"quote":"• USB - This is the positive voltage to/from the USB C jack, if USB is connected.","method":"text","fragment":"entities_pin_descriptions.json"}],"attr_src":{"kind":{"page":14,"quote":"USB / back silkscreen USB","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"label":{"page":14,"quote":"USB / back silkscreen USB","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"position":{"page":14,"quote":"USB / back silkscreen USB","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"connector":{"page":14,"quote":"USB / back silkscreen USB","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"designator":{"page":14,"quote":"USB / back silkscreen USB","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"description":{"page":15,"quote":"• USB - This is the positive voltage to/from the USB C jack, if USB is connected.","method":"text","fragment":"entities_pin_descriptions.json"}},"functions":[],"electrical":{"input_voltage":[{"src":{"page":36,"quote":"to the LiPoly JST connector, as well as USB which is the +5V from USB if connected.","method":"text","fragment":"ratings_board.json"},"typ":5,"via":"direct","unit":"V","category":"operating","parameter":"USB 5V"}]},"entity_type":"pin"},{"id":"J3-4","attrs":{"kind":"gpio","label":"D13","number":16,"chip_pin":"GPIO13","position":"4","connector":"JP3 (12-pin)","designator":"J3-4","power_domain":"IOVDD"},"sources":[{"page":14,"quote":"D13 / back silkscreen GP13","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"}],"attr_src":{"kind":{"page":14,"quote":"D13 / back silkscreen GP13","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"label":{"page":14,"quote":"D13 / back silkscreen GP13","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"number":{"via":"chip u1 GPIO13","method":"chip_link"},"chip_pin":{"page":14,"quote":"D13 / back silkscreen GP13","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"position":{"page":14,"quote":"D13 / back silkscreen GP13","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"connector":{"page":14,"quote":"D13 / back silkscreen GP13","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"designator":{"page":14,"quote":"D13 / back silkscreen GP13","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"power_domain":{"via":"chip u1 GPIO13","method":"chip_link"}},"chip_pin":{"pin":"GPIO13","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"Above the USB C connector is the D13 LED. This little red LED is controllable in","method":"text","fragment":"functions_board.json"},"signal":"red LED (board.LED)","category":"led"},{"alt":"F1","src":{"page":13,"quote":"| 13 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO13","signal":"SPI1_CSn","category":"spi","instance":"1","peripheral":"SPI"},{"alt":"F2","src":{"page":13,"quote":"| 13 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO13","signal":"UART0_RX","category":"uart","instance":"0","peripheral":"UART"},{"alt":"F3","src":{"page":13,"quote":"| 13 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO13","signal":"I2C0_SCL","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":13,"quote":"| 13 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO13","signal":"PWM6_B","category":"pwm","instance":"6","peripheral":"PWM"},{"alt":"F5","src":{"page":13,"quote":"| 13 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO13","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":13,"quote":"| 13 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO13","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":13,"quote":"| 13 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO13","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":13,"quote":"| 13 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO13","signal":"USB_VBUS_DET","category":"usb","instance":null,"peripheral":"USB"}],"electrical":{"ioh":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOH = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO13","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"Output source current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"iol":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOL = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO13","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Output sink current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"vih":[{"max":3.6,"min":2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage High @ IOVDD=3.3V | VIH | 2 | IOVDD + 0.3 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO13","unit":"V","symbol":"VIH","category":"characteristic","parameter":"Input Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD + 0.3"}],"vil":[{"max":0.8,"min":-0.3,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage Low @ IOVDD=3.3V | VIL | -0.3 | 0.8 | V |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO13","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Input Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V"}],"voh":[{"max":3.3,"min":2.62,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage High @ IOVDD=3.3V | VOH | 2.62 | IOVDD | V | IOH = 2, 4, 8 or 12mA depending on setting |","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO13","unit":"V","symbol":"VOH","category":"characteristic","parameter":"Output Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting"}],"vol":[{"max":0.5,"min":0,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage Low @ IOVDD=3.3V | VOL | 0 | 0.5 | V | IOL = 2, 4, 8 or 12mA depending on setting |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO13","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Output Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO13","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 GPIO13","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO13","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO13","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":8,"quote":"running at ~125 MHz @ 3.3V logic and power","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"Logic level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO13","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.8,"min":-0.5,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO13","unit":"V","symbol":"VPIN","category":"absolute_max","parameter":"Voltage at IO (absolute maximum)","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V)"}],"five_volt_tolerant":[{"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |; very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO13","value":false,"symbol":"","category":"absolute_max","parameter":"5 V tolerant","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 GPIO13","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"J3-5","attrs":{"kind":"gpio","label":"D12","number":15,"chip_pin":"GPIO12","position":"5","connector":"JP3 (12-pin)","designator":"J3-5","power_domain":"IOVDD"},"sources":[{"page":14,"quote":"D12 / back silkscreen GP12","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"}],"attr_src":{"kind":{"page":14,"quote":"D12 / back silkscreen GP12","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"label":{"page":14,"quote":"D12 / back silkscreen GP12","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"number":{"via":"chip u1 GPIO12","method":"chip_link"},"chip_pin":{"page":14,"quote":"D12 / back silkscreen GP12","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"position":{"page":14,"quote":"D12 / back silkscreen GP12","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"connector":{"page":14,"quote":"D12 / back silkscreen GP12","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"designator":{"page":14,"quote":"D12 / back silkscreen GP12","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"power_domain":{"via":"chip u1 GPIO12","method":"chip_link"}},"chip_pin":{"pin":"GPIO12","method":"rule","chip_id":"u1"},"functions":[{"alt":"F1","src":{"page":13,"quote":"| 12 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO12","signal":"SPI1_RX","category":"spi","instance":"1","peripheral":"SPI"},{"alt":"F2","src":{"page":13,"quote":"| 12 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO12","signal":"UART0_TX","category":"uart","instance":"0","peripheral":"UART"},{"alt":"F3","src":{"page":13,"quote":"| 12 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO12","signal":"I2C0_SDA","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":13,"quote":"| 12 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO12","signal":"PWM6_A","category":"pwm","instance":"6","peripheral":"PWM"},{"alt":"F5","src":{"page":13,"quote":"| 12 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO12","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":13,"quote":"| 12 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO12","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":13,"quote":"| 12 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO12","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":13,"quote":"| 12 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO12","signal":"USB_OVCUR_DET","category":"usb","instance":null,"peripheral":"USB"}],"electrical":{"ioh":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOH = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO12","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"Output source current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"iol":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOL = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO12","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Output sink current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"vih":[{"max":3.6,"min":2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage High @ IOVDD=3.3V | VIH | 2 | IOVDD + 0.3 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO12","unit":"V","symbol":"VIH","category":"characteristic","parameter":"Input Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD + 0.3"}],"vil":[{"max":0.8,"min":-0.3,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage Low @ IOVDD=3.3V | VIL | -0.3 | 0.8 | V |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO12","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Input Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V"}],"voh":[{"max":3.3,"min":2.62,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage High @ IOVDD=3.3V | VOH | 2.62 | IOVDD | V | IOH = 2, 4, 8 or 12mA depending on setting |","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO12","unit":"V","symbol":"VOH","category":"characteristic","parameter":"Output Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting"}],"vol":[{"max":0.5,"min":0,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage Low @ IOVDD=3.3V | VOL | 0 | 0.5 | V | IOL = 2, 4, 8 or 12mA depending on setting |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO12","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Output Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO12","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 GPIO12","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO12","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO12","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":8,"quote":"running at ~125 MHz @ 3.3V logic and power","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"Logic level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO12","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.8,"min":-0.5,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO12","unit":"V","symbol":"VPIN","category":"absolute_max","parameter":"Voltage at IO (absolute maximum)","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V)"}],"five_volt_tolerant":[{"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |; very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO12","value":false,"symbol":"","category":"absolute_max","parameter":"5 V tolerant","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 GPIO12","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"J3-6","attrs":{"kind":"gpio","label":"D11","number":14,"chip_pin":"GPIO11","position":"6","connector":"JP3 (12-pin)","designator":"J3-6","power_domain":"IOVDD"},"sources":[{"page":14,"quote":"D11 / back silkscreen GP11","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"}],"attr_src":{"kind":{"page":14,"quote":"D11 / back silkscreen GP11","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"label":{"page":14,"quote":"D11 / back silkscreen GP11","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"number":{"via":"chip u1 GPIO11","method":"chip_link"},"chip_pin":{"page":14,"quote":"D11 / back silkscreen GP11","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"position":{"page":14,"quote":"D11 / back silkscreen GP11","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"connector":{"page":14,"quote":"D11 / back silkscreen GP11","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"designator":{"page":14,"quote":"D11 / back silkscreen GP11","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"power_domain":{"via":"chip u1 GPIO11","method":"chip_link"}},"chip_pin":{"pin":"GPIO11","method":"rule","chip_id":"u1"},"functions":[{"alt":"F1","src":{"page":13,"quote":"| 11 | SPI1 TX | UART1 RTS | I2C1 SCL | PWM5 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO11","signal":"SPI1_TX","category":"spi","instance":"1","peripheral":"SPI"},{"alt":"F2","src":{"page":13,"quote":"| 11 | SPI1 TX | UART1 RTS | I2C1 SCL | PWM5 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO11","signal":"UART1_RTS","category":"uart","instance":"1","peripheral":"UART"},{"alt":"F3","src":{"page":13,"quote":"| 11 | SPI1 TX | UART1 RTS | I2C1 SCL | PWM5 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO11","signal":"I2C1_SCL","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":13,"quote":"| 11 | SPI1 TX | UART1 RTS | I2C1 SCL | PWM5 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO11","signal":"PWM5_B","category":"pwm","instance":"5","peripheral":"PWM"},{"alt":"F5","src":{"page":13,"quote":"| 11 | SPI1 TX | UART1 RTS | I2C1 SCL | PWM5 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO11","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":13,"quote":"| 11 | SPI1 TX | UART1 RTS | I2C1 SCL | PWM5 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO11","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":13,"quote":"| 11 | SPI1 TX | UART1 RTS | I2C1 SCL | PWM5 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO11","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":13,"quote":"| 11 | SPI1 TX | UART1 RTS | I2C1 SCL | PWM5 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO11","signal":"USB_VBUS_EN","category":"usb","instance":null,"peripheral":"USB"}],"electrical":{"ioh":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOH = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO11","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"Output source current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"iol":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOL = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO11","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Output sink current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"vih":[{"max":3.6,"min":2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage High @ IOVDD=3.3V | VIH | 2 | IOVDD + 0.3 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO11","unit":"V","symbol":"VIH","category":"characteristic","parameter":"Input Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD + 0.3"}],"vil":[{"max":0.8,"min":-0.3,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage Low @ IOVDD=3.3V | VIL | -0.3 | 0.8 | V |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO11","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Input Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V"}],"voh":[{"max":3.3,"min":2.62,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage High @ IOVDD=3.3V | VOH | 2.62 | IOVDD | V | IOH = 2, 4, 8 or 12mA depending on setting |","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO11","unit":"V","symbol":"VOH","category":"characteristic","parameter":"Output Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting"}],"vol":[{"max":0.5,"min":0,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage Low @ IOVDD=3.3V | VOL | 0 | 0.5 | V | IOL = 2, 4, 8 or 12mA depending on setting |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO11","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Output Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO11","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 GPIO11","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO11","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO11","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":8,"quote":"running at ~125 MHz @ 3.3V logic and power","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"Logic level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO11","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.8,"min":-0.5,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO11","unit":"V","symbol":"VPIN","category":"absolute_max","parameter":"Voltage at IO (absolute maximum)","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V)"}],"five_volt_tolerant":[{"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |; very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO11","value":false,"symbol":"","category":"absolute_max","parameter":"5 V tolerant","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 GPIO11","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"J3-7","attrs":{"kind":"gpio","label":"D10","number":13,"chip_pin":"GPIO10","position":"7","connector":"JP3 (12-pin)","designator":"J3-7","power_domain":"IOVDD"},"sources":[{"page":14,"quote":"D10 / back silkscreen GP10","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"}],"attr_src":{"kind":{"page":14,"quote":"D10 / back silkscreen GP10","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"label":{"page":14,"quote":"D10 / back silkscreen GP10","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"number":{"via":"chip u1 GPIO10","method":"chip_link"},"chip_pin":{"page":14,"quote":"D10 / back silkscreen GP10","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"position":{"page":14,"quote":"D10 / back silkscreen GP10","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"connector":{"page":14,"quote":"D10 / back silkscreen GP10","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"designator":{"page":14,"quote":"D10 / back silkscreen GP10","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"power_domain":{"via":"chip u1 GPIO10","method":"chip_link"}},"chip_pin":{"pin":"GPIO10","method":"rule","chip_id":"u1"},"functions":[{"alt":"F1","src":{"page":13,"quote":"| 10 | SPI1 SCK | UART1 CTS | I2C1 SDA | PWM5 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO10","signal":"SPI1_SCK","category":"spi","instance":"1","peripheral":"SPI"},{"alt":"F2","src":{"page":13,"quote":"| 10 | SPI1 SCK | UART1 CTS | I2C1 SDA | PWM5 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO10","signal":"UART1_CTS","category":"uart","instance":"1","peripheral":"UART"},{"alt":"F3","src":{"page":13,"quote":"| 10 | SPI1 SCK | UART1 CTS | I2C1 SDA | PWM5 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO10","signal":"I2C1_SDA","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":13,"quote":"| 10 | SPI1 SCK | UART1 CTS | I2C1 SDA | PWM5 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO10","signal":"PWM5_A","category":"pwm","instance":"5","peripheral":"PWM"},{"alt":"F5","src":{"page":13,"quote":"| 10 | SPI1 SCK | UART1 CTS | I2C1 SDA | PWM5 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO10","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":13,"quote":"| 10 | SPI1 SCK | UART1 CTS | I2C1 SDA | PWM5 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO10","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":13,"quote":"| 10 | SPI1 SCK | UART1 CTS | I2C1 SDA | PWM5 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO10","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":13,"quote":"| 10 | SPI1 SCK | UART1 CTS | I2C1 SDA | PWM5 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO10","signal":"USB_VBUS_DET","category":"usb","instance":null,"peripheral":"USB"}],"electrical":{"ioh":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOH = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO10","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"Output source current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"iol":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOL = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO10","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Output sink current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"vih":[{"max":3.6,"min":2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage High @ IOVDD=3.3V | VIH | 2 | IOVDD + 0.3 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO10","unit":"V","symbol":"VIH","category":"characteristic","parameter":"Input Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD + 0.3"}],"vil":[{"max":0.8,"min":-0.3,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage Low @ IOVDD=3.3V | VIL | -0.3 | 0.8 | V |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO10","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Input Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V"}],"voh":[{"max":3.3,"min":2.62,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage High @ IOVDD=3.3V | VOH | 2.62 | IOVDD | V | IOH = 2, 4, 8 or 12mA depending on setting |","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO10","unit":"V","symbol":"VOH","category":"characteristic","parameter":"Output Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting"}],"vol":[{"max":0.5,"min":0,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage Low @ IOVDD=3.3V | VOL | 0 | 0.5 | V | IOL = 2, 4, 8 or 12mA depending on setting |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO10","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Output Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO10","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 GPIO10","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO10","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO10","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":8,"quote":"running at ~125 MHz @ 3.3V logic and power","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"Logic level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO10","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.8,"min":-0.5,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO10","unit":"V","symbol":"VPIN","category":"absolute_max","parameter":"Voltage at IO (absolute maximum)","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V)"}],"five_volt_tolerant":[{"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |; very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO10","value":false,"symbol":"","category":"absolute_max","parameter":"5 V tolerant","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 GPIO10","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"J3-8","attrs":{"kind":"gpio","label":"D9","number":12,"chip_pin":"GPIO9","position":"8","connector":"JP3 (12-pin)","designator":"J3-8","power_domain":"IOVDD"},"sources":[{"page":14,"quote":"D9 / back silkscreen GP09","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"}],"attr_src":{"kind":{"page":14,"quote":"D9 / back silkscreen GP09","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"label":{"page":14,"quote":"D9 / back silkscreen GP09","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"number":{"via":"chip u1 GPIO9","method":"chip_link"},"chip_pin":{"page":14,"quote":"D9 / back silkscreen GP09","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"position":{"page":14,"quote":"D9 / back silkscreen GP09","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"connector":{"page":14,"quote":"D9 / back silkscreen GP09","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"designator":{"page":14,"quote":"D9 / back silkscreen GP09","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"power_domain":{"via":"chip u1 GPIO9","method":"chip_link"}},"chip_pin":{"pin":"GPIO9","method":"rule","chip_id":"u1"},"functions":[{"alt":"F1","src":{"page":13,"quote":"| 9 | SPI1 CSn | UART1 RX | I2C0 SCL | PWM4 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO9","signal":"SPI1_CSn","category":"spi","instance":"1","peripheral":"SPI"},{"alt":"F2","src":{"page":13,"quote":"| 9 | SPI1 CSn | UART1 RX | I2C0 SCL | PWM4 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO9","signal":"UART1_RX","category":"uart","instance":"1","peripheral":"UART"},{"alt":"F3","src":{"page":13,"quote":"| 9 | SPI1 CSn | UART1 RX | I2C0 SCL | PWM4 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO9","signal":"I2C0_SCL","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":13,"quote":"| 9 | SPI1 CSn | UART1 RX | I2C0 SCL | PWM4 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO9","signal":"PWM4_B","category":"pwm","instance":"4","peripheral":"PWM"},{"alt":"F5","src":{"page":13,"quote":"| 9 | SPI1 CSn | UART1 RX | I2C0 SCL | PWM4 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO9","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":13,"quote":"| 9 | SPI1 CSn | UART1 RX | I2C0 SCL | PWM4 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO9","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":13,"quote":"| 9 | SPI1 CSn | UART1 RX | I2C0 SCL | PWM4 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO9","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":13,"quote":"| 9 | SPI1 CSn | UART1 RX | I2C0 SCL | PWM4 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO9","signal":"USB_OVCUR_DET","category":"usb","instance":null,"peripheral":"USB"}],"electrical":{"ioh":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOH = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO9","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"Output source current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"iol":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOL = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO9","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Output sink current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"vih":[{"max":3.6,"min":2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage High @ IOVDD=3.3V | VIH | 2 | IOVDD + 0.3 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO9","unit":"V","symbol":"VIH","category":"characteristic","parameter":"Input Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD + 0.3"}],"vil":[{"max":0.8,"min":-0.3,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage Low @ IOVDD=3.3V | VIL | -0.3 | 0.8 | V |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO9","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Input Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V"}],"voh":[{"max":3.3,"min":2.62,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage High @ IOVDD=3.3V | VOH | 2.62 | IOVDD | V | IOH = 2, 4, 8 or 12mA depending on setting |","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO9","unit":"V","symbol":"VOH","category":"characteristic","parameter":"Output Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting"}],"vol":[{"max":0.5,"min":0,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage Low @ IOVDD=3.3V | VOL | 0 | 0.5 | V | IOL = 2, 4, 8 or 12mA depending on setting |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO9","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Output Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO9","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 GPIO9","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO9","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO9","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":8,"quote":"running at ~125 MHz @ 3.3V logic and power","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"Logic level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO9","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.8,"min":-0.5,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO9","unit":"V","symbol":"VPIN","category":"absolute_max","parameter":"Voltage at IO (absolute maximum)","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V)"}],"five_volt_tolerant":[{"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |; very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO9","value":false,"symbol":"","category":"absolute_max","parameter":"5 V tolerant","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 GPIO9","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"J3-9","attrs":{"kind":"gpio","label":"D6","number":11,"chip_pin":"GPIO8","position":"9","connector":"JP3 (12-pin)","designator":"J3-9","power_domain":"IOVDD"},"sources":[{"page":14,"quote":"D6 / back silkscreen GP08","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"}],"attr_src":{"kind":{"page":14,"quote":"D6 / back silkscreen GP08","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"label":{"page":14,"quote":"D6 / back silkscreen GP08","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"number":{"via":"chip u1 GPIO8","method":"chip_link"},"chip_pin":{"page":14,"quote":"D6 / back silkscreen GP08","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"position":{"page":14,"quote":"D6 / back silkscreen GP08","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"connector":{"page":14,"quote":"D6 / back silkscreen GP08","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"designator":{"page":14,"quote":"D6 / back silkscreen GP08","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"power_domain":{"via":"chip u1 GPIO8","method":"chip_link"}},"chip_pin":{"pin":"GPIO8","method":"rule","chip_id":"u1"},"functions":[{"alt":"F1","src":{"page":13,"quote":"| 8 | SPI1 RX | UART1 TX | I2C0 SDA | PWM4 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO8","signal":"SPI1_RX","category":"spi","instance":"1","peripheral":"SPI"},{"alt":"F2","src":{"page":13,"quote":"| 8 | SPI1 RX | UART1 TX | I2C0 SDA | PWM4 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO8","signal":"UART1_TX","category":"uart","instance":"1","peripheral":"UART"},{"alt":"F3","src":{"page":13,"quote":"| 8 | SPI1 RX | UART1 TX | I2C0 SDA | PWM4 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO8","signal":"I2C0_SDA","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":13,"quote":"| 8 | SPI1 RX | UART1 TX | I2C0 SDA | PWM4 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO8","signal":"PWM4_A","category":"pwm","instance":"4","peripheral":"PWM"},{"alt":"F5","src":{"page":13,"quote":"| 8 | SPI1 RX | UART1 TX | I2C0 SDA | PWM4 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO8","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":13,"quote":"| 8 | SPI1 RX | UART1 TX | I2C0 SDA | PWM4 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO8","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":13,"quote":"| 8 | SPI1 RX | UART1 TX | I2C0 SDA | PWM4 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO8","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":13,"quote":"| 8 | SPI1 RX | UART1 TX | I2C0 SDA | PWM4 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO8","signal":"USB_VBUS_EN","category":"usb","instance":null,"peripheral":"USB"}],"electrical":{"ioh":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOH = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO8","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"Output source current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"iol":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOL = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO8","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Output sink current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"vih":[{"max":3.6,"min":2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage High @ IOVDD=3.3V | VIH | 2 | IOVDD + 0.3 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO8","unit":"V","symbol":"VIH","category":"characteristic","parameter":"Input Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD + 0.3"}],"vil":[{"max":0.8,"min":-0.3,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage Low @ IOVDD=3.3V | VIL | -0.3 | 0.8 | V |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO8","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Input Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V"}],"voh":[{"max":3.3,"min":2.62,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage High @ IOVDD=3.3V | VOH | 2.62 | IOVDD | V | IOH = 2, 4, 8 or 12mA depending on setting |","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO8","unit":"V","symbol":"VOH","category":"characteristic","parameter":"Output Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting"}],"vol":[{"max":0.5,"min":0,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage Low @ IOVDD=3.3V | VOL | 0 | 0.5 | V | IOL = 2, 4, 8 or 12mA depending on setting |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO8","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Output Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO8","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 GPIO8","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO8","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO8","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":8,"quote":"running at ~125 MHz @ 3.3V logic and power","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"Logic level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO8","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.8,"min":-0.5,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO8","unit":"V","symbol":"VPIN","category":"absolute_max","parameter":"Voltage at IO (absolute maximum)","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V)"}],"five_volt_tolerant":[{"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |; very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO8","value":false,"symbol":"","category":"absolute_max","parameter":"5 V tolerant","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 GPIO8","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"J3-10","attrs":{"kind":"gpio","label":"D5","number":9,"chip_pin":"GPIO7","position":"10","connector":"JP3 (12-pin)","designator":"J3-10","power_domain":"IOVDD"},"sources":[{"page":14,"quote":"D5 / back silkscreen GP07","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"}],"attr_src":{"kind":{"page":14,"quote":"D5 / back silkscreen GP07","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"label":{"page":14,"quote":"D5 / back silkscreen GP07","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"number":{"via":"chip u1 GPIO7","method":"chip_link"},"chip_pin":{"page":14,"quote":"D5 / back silkscreen GP07","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"position":{"page":14,"quote":"D5 / back silkscreen GP07","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"connector":{"page":14,"quote":"D5 / back silkscreen GP07","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"designator":{"page":14,"quote":"D5 / back silkscreen GP07","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"power_domain":{"via":"chip u1 GPIO7","method":"chip_link"}},"chip_pin":{"pin":"GPIO7","method":"rule","chip_id":"u1"},"functions":[{"alt":"F1","src":{"page":13,"quote":"| 7 | SPI0 TX | UART1 RTS | I2C1 SCL | PWM3 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO7","signal":"SPI0_TX","category":"spi","instance":"0","peripheral":"SPI"},{"alt":"F2","src":{"page":13,"quote":"| 7 | SPI0 TX | UART1 RTS | I2C1 SCL | PWM3 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO7","signal":"UART1_RTS","category":"uart","instance":"1","peripheral":"UART"},{"alt":"F3","src":{"page":13,"quote":"| 7 | SPI0 TX | UART1 RTS | I2C1 SCL | PWM3 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO7","signal":"I2C1_SCL","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":13,"quote":"| 7 | SPI0 TX | UART1 RTS | I2C1 SCL | PWM3 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO7","signal":"PWM3_B","category":"pwm","instance":"3","peripheral":"PWM"},{"alt":"F5","src":{"page":13,"quote":"| 7 | SPI0 TX | UART1 RTS | I2C1 SCL | PWM3 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO7","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":13,"quote":"| 7 | SPI0 TX | UART1 RTS | I2C1 SCL | PWM3 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO7","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":13,"quote":"| 7 | SPI0 TX | UART1 RTS | I2C1 SCL | PWM3 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO7","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":13,"quote":"| 7 | SPI0 TX | UART1 RTS | I2C1 SCL | PWM3 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO7","signal":"USB_VBUS_DET","category":"usb","instance":null,"peripheral":"USB"}],"electrical":{"ioh":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOH = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO7","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"Output source current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"iol":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOL = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO7","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Output sink current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"vih":[{"max":3.6,"min":2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage High @ IOVDD=3.3V | VIH | 2 | IOVDD + 0.3 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO7","unit":"V","symbol":"VIH","category":"characteristic","parameter":"Input Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD + 0.3"}],"vil":[{"max":0.8,"min":-0.3,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage Low @ IOVDD=3.3V | VIL | -0.3 | 0.8 | V |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO7","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Input Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V"}],"voh":[{"max":3.3,"min":2.62,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage High @ IOVDD=3.3V | VOH | 2.62 | IOVDD | V | IOH = 2, 4, 8 or 12mA depending on setting |","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO7","unit":"V","symbol":"VOH","category":"characteristic","parameter":"Output Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting"}],"vol":[{"max":0.5,"min":0,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage Low @ IOVDD=3.3V | VOL | 0 | 0.5 | V | IOL = 2, 4, 8 or 12mA depending on setting |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO7","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Output Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO7","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 GPIO7","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO7","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO7","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":8,"quote":"running at ~125 MHz @ 3.3V logic and power","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"Logic level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO7","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.8,"min":-0.5,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO7","unit":"V","symbol":"VPIN","category":"absolute_max","parameter":"Voltage at IO (absolute maximum)","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V)"}],"five_volt_tolerant":[{"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |; very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO7","value":false,"symbol":"","category":"absolute_max","parameter":"5 V tolerant","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 GPIO7","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"J3-11","attrs":{"kind":"gpio","label":"SCL","number":5,"chip_pin":"GPIO3","position":"11","connector":"JP3 (12-pin)","designator":"J3-11","power_domain":"IOVDD"},"sources":[{"page":14,"quote":"SCL / back silkscreen GP03","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"}],"attr_src":{"kind":{"page":14,"quote":"SCL / back silkscreen GP03","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"label":{"page":14,"quote":"SCL / back silkscreen GP03","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"number":{"via":"chip u1 GPIO3","method":"chip_link"},"chip_pin":{"page":14,"quote":"SCL / back silkscreen GP03","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"position":{"page":14,"quote":"SCL / back silkscreen GP03","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"connector":{"page":14,"quote":"SCL / back silkscreen GP03","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"designator":{"page":14,"quote":"SCL / back silkscreen GP03","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"power_domain":{"via":"chip u1 GPIO3","method":"chip_link"}},"chip_pin":{"pin":"GPIO3","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"This connector uses the SCL and SDA pins for I2C, which ends up being the RP2040's I2C1 peripheral.","method":"text","fragment":"functions_board.json"},"signal":"STEMMA QT SCL (I2C1)","category":"i2c"},{"alt":"F1","src":{"page":13,"quote":"| 3 | SPI0 TX | UART0 RTS | I2C1 SCL | PWM1 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO3","signal":"SPI0_TX","category":"spi","instance":"0","peripheral":"SPI"},{"alt":"F2","src":{"page":13,"quote":"| 3 | SPI0 TX | UART0 RTS | I2C1 SCL | PWM1 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO3","signal":"UART0_RTS","category":"uart","instance":"0","peripheral":"UART"},{"alt":"F3","src":{"page":13,"quote":"| 3 | SPI0 TX | UART0 RTS | I2C1 SCL | PWM1 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO3","signal":"I2C1_SCL","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":13,"quote":"| 3 | SPI0 TX | UART0 RTS | I2C1 SCL | PWM1 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO3","signal":"PWM1_B","category":"pwm","instance":"1","peripheral":"PWM"},{"alt":"F5","src":{"page":13,"quote":"| 3 | SPI0 TX | UART0 RTS | I2C1 SCL | PWM1 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO3","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":13,"quote":"| 3 | SPI0 TX | UART0 RTS | I2C1 SCL | PWM1 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO3","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":13,"quote":"| 3 | SPI0 TX | UART0 RTS | I2C1 SCL | PWM1 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO3","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":13,"quote":"| 3 | SPI0 TX | UART0 RTS | I2C1 SCL | PWM1 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO3","signal":"USB_OVCUR_DET","category":"usb","instance":null,"peripheral":"USB"}],"electrical":{"ioh":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOH = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO3","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"Output source current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"iol":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOL = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO3","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Output sink current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"vih":[{"max":3.6,"min":2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage High @ IOVDD=3.3V | VIH | 2 | IOVDD + 0.3 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO3","unit":"V","symbol":"VIH","category":"characteristic","parameter":"Input Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD + 0.3"}],"vil":[{"max":0.8,"min":-0.3,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage Low @ IOVDD=3.3V | VIL | -0.3 | 0.8 | V |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO3","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Input Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V"}],"voh":[{"max":3.3,"min":2.62,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage High @ IOVDD=3.3V | VOH | 2.62 | IOVDD | V | IOH = 2, 4, 8 or 12mA depending on setting |","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO3","unit":"V","symbol":"VOH","category":"characteristic","parameter":"Output Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting"}],"vol":[{"max":0.5,"min":0,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage Low @ IOVDD=3.3V | VOL | 0 | 0.5 | V | IOL = 2, 4, 8 or 12mA depending on setting |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO3","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Output Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO3","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 GPIO3","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO3","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO3","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":8,"quote":"running at ~125 MHz @ 3.3V logic and power","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"Logic level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO3","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.8,"min":-0.5,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO3","unit":"V","symbol":"VPIN","category":"absolute_max","parameter":"Voltage at IO (absolute maximum)","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V)"}],"five_volt_tolerant":[{"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |; very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO3","value":false,"symbol":"","category":"absolute_max","parameter":"5 V tolerant","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 GPIO3","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"J3-12","attrs":{"kind":"gpio","label":"SDA","number":4,"chip_pin":"GPIO2","position":"12","connector":"JP3 (12-pin)","designator":"J3-12","power_domain":"IOVDD"},"sources":[{"page":14,"quote":"SDA / back silkscreen GP02","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"}],"attr_src":{"kind":{"page":14,"quote":"SDA / back silkscreen GP02","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"label":{"page":14,"quote":"SDA / back silkscreen GP02","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"number":{"via":"chip u1 GPIO2","method":"chip_link"},"chip_pin":{"page":14,"quote":"SDA / back silkscreen GP02","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"position":{"page":14,"quote":"SDA / back silkscreen GP02","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"connector":{"page":14,"quote":"SDA / back silkscreen GP02","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"designator":{"page":14,"quote":"SDA / back silkscreen GP02","figure":"Pinouts — top and bottom board photos","method":"drawing","fragment":"entities_pinout_photos.json"},"power_domain":{"via":"chip u1 GPIO2","method":"chip_link"}},"chip_pin":{"pin":"GPIO2","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"This connector uses the SCL and SDA pins for I2C, which ends up being the RP2040's I2C1 peripheral.","method":"text","fragment":"functions_board.json"},"signal":"STEMMA QT SDA (I2C1)","category":"i2c"},{"alt":"F1","src":{"page":13,"quote":"| 2 | SPI0 SCK | UART0 CTS | I2C1 SDA | PWM1 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO2","signal":"SPI0_SCK","category":"spi","instance":"0","peripheral":"SPI"},{"alt":"F2","src":{"page":13,"quote":"| 2 | SPI0 SCK | UART0 CTS | I2C1 SDA | PWM1 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO2","signal":"UART0_CTS","category":"uart","instance":"0","peripheral":"UART"},{"alt":"F3","src":{"page":13,"quote":"| 2 | SPI0 SCK | UART0 CTS | I2C1 SDA | PWM1 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO2","signal":"I2C1_SDA","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":13,"quote":"| 2 | SPI0 SCK | UART0 CTS | I2C1 SDA | PWM1 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO2","signal":"PWM1_A","category":"pwm","instance":"1","peripheral":"PWM"},{"alt":"F5","src":{"page":13,"quote":"| 2 | SPI0 SCK | UART0 CTS | I2C1 SDA | PWM1 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO2","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":13,"quote":"| 2 | SPI0 SCK | UART0 CTS | I2C1 SDA | PWM1 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO2","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":13,"quote":"| 2 | SPI0 SCK | UART0 CTS | I2C1 SDA | PWM1 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO2","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":13,"quote":"| 2 | SPI0 SCK | UART0 CTS | I2C1 SDA | PWM1 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO2","signal":"USB_VBUS_EN","category":"usb","instance":null,"peripheral":"USB"}],"electrical":{"ioh":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOH = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO2","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"Output source current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"iol":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOL = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 GPIO2","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Output sink current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"vih":[{"max":3.6,"min":2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage High @ IOVDD=3.3V | VIH | 2 | IOVDD + 0.3 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO2","unit":"V","symbol":"VIH","category":"characteristic","parameter":"Input Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD + 0.3"}],"vil":[{"max":0.8,"min":-0.3,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage Low @ IOVDD=3.3V | VIL | -0.3 | 0.8 | V |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO2","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Input Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V"}],"voh":[{"max":3.3,"min":2.62,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage High @ IOVDD=3.3V | VOH | 2.62 | IOVDD | V | IOH = 2, 4, 8 or 12mA depending on setting |","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO2","unit":"V","symbol":"VOH","category":"characteristic","parameter":"Output Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting"}],"vol":[{"max":0.5,"min":0,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage Low @ IOVDD=3.3V | VOL | 0 | 0.5 | V | IOL = 2, 4, 8 or 12mA depending on setting |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO2","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Output Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO2","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 GPIO2","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO2","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO2","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":8,"quote":"running at ~125 MHz @ 3.3V logic and power","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"Logic level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO2","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.8,"min":-0.5,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO2","unit":"V","symbol":"VPIN","category":"absolute_max","parameter":"Voltage at IO (absolute maximum)","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V)"}],"five_volt_tolerant":[{"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |; very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 GPIO2","value":false,"symbol":"","category":"absolute_max","parameter":"5 V tolerant","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 GPIO2","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"SWCLK","attrs":{"kind":"debug","label":"SWCLK","number":24,"chip_pin":"SWCLK","position":"back pad","connector":"SWD pads","designator":"SWCLK","power_domain":"IOVDD"},"sources":[{"page":23,"quote":"On the back of the board are pads for the SWCLK and SWDIO pins. They provide","method":"text","fragment":"entities_pinout_photos.json"}],"attr_src":{"kind":{"page":23,"quote":"On the back of the board are pads for the SWCLK and SWDIO pins. They provide","method":"text","fragment":"entities_pinout_photos.json"},"label":{"page":23,"quote":"On the back of the board are pads for the SWCLK and SWDIO pins. They provide","method":"text","fragment":"entities_pinout_photos.json"},"number":{"via":"chip u1 SWCLK","method":"chip_link"},"chip_pin":{"page":23,"quote":"On the back of the board are pads for the SWCLK and SWDIO pins. They provide","method":"text","fragment":"entities_pinout_photos.json"},"position":{"page":23,"quote":"On the back of the board are pads for the SWCLK and SWDIO pins. They provide","method":"text","fragment":"entities_pinout_photos.json"},"connector":{"page":23,"quote":"On the back of the board are pads for the SWCLK and SWDIO pins. They provide","method":"text","fragment":"entities_pinout_photos.json"},"designator":{"page":23,"quote":"On the back of the board are pads for the SWCLK and SWDIO pins. They provide","method":"text","fragment":"entities_pinout_photos.json"},"power_domain":{"via":"chip u1 SWCLK","method":"chip_link"}},"chip_pin":{"pin":"SWCLK","method":"rule","chip_id":"u1"},"functions":[],"electrical":{"ioh":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOH = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 SWCLK","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"Output source current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"iol":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOL = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 SWCLK","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Output sink current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"vih":[{"max":3.6,"min":2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage High @ IOVDD=3.3V | VIH | 2 | IOVDD + 0.3 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 SWCLK","unit":"V","symbol":"VIH","category":"characteristic","parameter":"Input Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD + 0.3"}],"vil":[{"max":0.8,"min":-0.3,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage Low @ IOVDD=3.3V | VIL | -0.3 | 0.8 | V |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 SWCLK","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Input Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V"}],"voh":[{"max":3.3,"min":2.62,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage High @ IOVDD=3.3V | VOH | 2.62 | IOVDD | V | IOH = 2, 4, 8 or 12mA depending on setting |","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 SWCLK","unit":"V","symbol":"VOH","category":"characteristic","parameter":"Output Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting"}],"vol":[{"max":0.5,"min":0,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage Low @ IOVDD=3.3V | VOL | 0 | 0.5 | V | IOL = 2, 4, 8 or 12mA depending on setting |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 SWCLK","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Output Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 SWCLK","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 SWCLK","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 SWCLK","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 SWCLK","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":8,"quote":"running at ~125 MHz @ 3.3V logic and power","method":"text","fragment":"ratings_board.json"},"via":"direct","unit":"V","value":3.3,"category":"operating","parameter":"Logic level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 SWCLK","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.8,"min":-0.5,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 SWCLK","unit":"V","symbol":"VPIN","category":"absolute_max","parameter":"Voltage at IO (absolute maximum)","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V)"}],"five_volt_tolerant":[{"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |; very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 SWCLK","value":false,"symbol":"","category":"absolute_max","parameter":"5 V tolerant","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 SWCLK","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"SWDIO","attrs":{"kind":"debug","label":"SWDIO","number":25,"chip_pin":"SWD","position":"back pad","connector":"SWD pads","designator":"SWDIO","power_domain":"IOVDD"},"sources":[{"page":23,"quote":"On the back of the board are pads for the SWCLK and SWDIO pins. They provide","method":"text","fragment":"entities_pinout_photos.json"}],"attr_src":{"kind":{"page":23,"quote":"On the back of the board are pads for the SWCLK and SWDIO pins. They provide","method":"text","fragment":"entities_pinout_photos.json"},"label":{"page":23,"quote":"On the back of the board are pads for the SWCLK and SWDIO pins. They provide","method":"text","fragment":"entities_pinout_photos.json"},"number":{"via":"chip u1 SWD","method":"chip_link"},"chip_pin":{"page":23,"quote":"On the back of the board are pads for the SWCLK and SWDIO pins. They provide","method":"text","fragment":"entities_pinout_photos.json"},"position":{"page":23,"quote":"On the back of the board are pads for the SWCLK and SWDIO pins. They provide","method":"text","fragment":"entities_pinout_photos.json"},"connector":{"page":23,"quote":"On the back of the board are pads for the SWCLK and SWDIO pins. They provide","method":"text","fragment":"entities_pinout_photos.json"},"designator":{"page":23,"quote":"On the back of the board are pads for the SWCLK and SWDIO pins. They provide","method":"text","fragment":"entities_pinout_photos.json"},"power_domain":{"via":"chip u1 SWD","method":"chip_link"}},"chip_pin":{"pin":"SWD","method":"rule","chip_id":"u1"},"functions":[],"electrical":{"ioh":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOH = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 SWD","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"Output source current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"iol":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOL = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 SWD","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Output sink current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"vih":[{"max":3.6,"min":2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage High @ IOVDD=3.3V | VIH | 2 | IOVDD + 0.3 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 SWD","unit":"V","symbol":"VIH","category":"characteristic","parameter":"Input Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD + 0.3"}],"vil":[{"max":0.8,"min":-0.3,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage Low @ IOVDD=3.3V | VIL | -0.3 | 0.8 | V |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 SWD","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Input Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V"}],"voh":[{"max":3.3,"min":2.62,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage High @ IOVDD=3.3V | VOH | 2.62 | IOVDD | V | IOH = 2, 4, 8 or 12mA depending on setting |","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 SWD","unit":"V","symbol":"VOH","category":"characteristic","parameter":"Output Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting"}],"vol":[{"max":0.5,"min":0,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage Low @ IOVDD=3.3V | VOL | 0 | 0.5 | V | IOL = 2, 4, 8 or 12mA depending on setting |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 SWD","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Output Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 SWD","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 SWD","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 SWD","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 SWD","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":8,"quote":"running at ~125 MHz @ 3.3V logic and power","method":"text","fragment":"ratings_board.json"},"via":"direct","unit":"V","value":3.3,"category":"operating","parameter":"Logic level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 SWD","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.8,"min":-0.5,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 SWD","unit":"V","symbol":"VPIN","category":"absolute_max","parameter":"Voltage at IO (absolute maximum)","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V)"}],"five_volt_tolerant":[{"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |; very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 SWD","value":false,"symbol":"","category":"absolute_max","parameter":"5 V tolerant","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 SWD","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"}],"taxonomy":{"cover_toc":{"role":"other","definition":"Guide cover or table of contents"},"overview_specs":{"role":"identity_overview","definition":"Product overview and specification bullet list (size, chip, memory, GPIO counts, charger, LEDs)"},"power_management":{"role":"electrical_ratings","definition":"Battery + USB power, power supplies, regulator, battery measurement, enable pin"},"software_tutorial":{"role":"software_usage","definition":"CircuitPython/Arduino/MicroPython installation, code editing, serial console, libraries, examples, FAQ"},"assembly_soldering":{"role":"other","definition":"Soldering headers and assembly steps"},"pinout_power_logic":{"role":"pins_or_terminals","definition":"Pinouts: power pins, logic pins, GPIO functions, buttons, LEDs, STEMMA QT, debug interfaces"},"downloads_schematic":{"role":"mechanical_dimensions","definition":"Downloads, schematic, fab print with dimensions, 3D model"}},"variants":{},"commercial":{"other":{},"checked_at":"2026-09-24T14:48:48+00:00","compliance":[],"ordering_codes":[{"code":"4884","description":"Adafruit Feather RP2040"}]},"mechanical":{"dims":{"width":{"src":{"page":161,"quote":"0.90","figure":"Fab print (inches)","method":"derived"},"unit":"mm","value":22.86},"length":{"src":{"page":161,"quote":"2.00","figure":"Fab print (inches)","method":"derived"},"unit":"mm","value":50.8},"hole_edge":{"src":{"page":161,"quote":"0.10","figure":"Fab print (inches)","method":"derived"},"unit":"mm","value":2.54},"hole_spacing_x":{"src":{"page":161,"quote":"1.80","figure":"Fab print (inches)","method":"derived"},"unit":"mm","value":45.72},"hole_spacing_y":{"src":{"page":161,"quote":"0.70","figure":"Fab print (inches)","method":"derived"},"unit":"mm","value":17.78},"overall_height":{"src":{"page":8,"quote":"Measures 2.0\" x 0.9\" x 0.28\" (50.8mm x 22.8mm x 7mm) without headers soldered in","method":"text"},"unit":"mm","value":7},"header_row_spacing":{"src":{"page":161,"quote":"0.80","figure":"Fab print (inches)","method":"derived"},"unit":"mm","value":20.32},"overall_height_store":{"src":{"url":"https://www.adafruit.com/product/4884","quote":"Product Dimensions: 51.0mm x 23.0mm x 7.5mm","method":"web_page"},"note":"store page disagrees with the guide (7 mm)","unit":"mm","value":7.5}},"kind":"mechanical","holes":[{"d":2.5,"x":2.54,"y":2.54,"src":{"page":161,"quote":"0.10 / 1.80 / 0.70 (hole Ø assumed 2.5)","figure":"Fab print","method":"derived"},"face":"pcb","name":"M1"},{"d":2.5,"x":48.26,"y":2.54,"src":{"page":161,"quote":"0.10 / 1.80 / 0.70 (hole Ø assumed 2.5)","figure":"Fab print","method":"derived"},"face":"pcb","name":"M2"},{"d":2.5,"x":2.54,"y":20.32,"src":{"page":161,"quote":"0.10 / 1.80 / 0.70 (hole Ø assumed 2.5)","figure":"Fab print","method":"derived"},"face":"pcb","name":"M3"},{"d":2.5,"x":48.26,"y":20.32,"src":{"page":161,"quote":"0.10 / 1.80 / 0.70 (hole Ø assumed 2.5)","figure":"Fab print","method":"derived"},"face":"pcb","name":"M4"}],"units":"mm","origin":"x=0 at the USB-C end, x along the 2.00 in length; y=0 at the 16-pin (Rst…D4) edge; z=0 PCB bottom; fab print in inches converted ×25.4","features":[{"h":5.4,"l":16.5,"w":11,"x":0,"y":6,"src":{"page":8,"quote":"• Measures 2.0\" x 0.9\" x 0.28\" (50.8mm x 22.8mm x 7mm) without headers","method":"text"},"name":"USB-C + JST envelope (overall height 7 mm)","side":"top","assumed":"footprint of the tallest parts (USB-C, JST) read from the photo; height = 7 mm overall − 1.6 mm PCB","overhang":false}],"archetype":"pcb_board","assumptions":{"hole_d":{"why":"mounting-hole diameter not dimensioned on the fab print; 2.5 mm assumed from the drawn ring size","value":2.5},"thickness":{"why":"PCB thickness is not printed in the guide or fab print; 1.6 mm assumed (the overall 7 mm height is sourced)","value":1.6}}},"page_index":[{"page":1,"tags":["cover_toc"],"primary":"cover_toc"},{"page":2,"tags":["cover_toc","pinout_power_logic","assembly_soldering","power_management"],"primary":"cover_toc"},{"page":3,"tags":["cover_toc","software_tutorial"],"primary":"cover_toc"},{"page":4,"tags":["cover_toc","software_tutorial"],"primary":"software_tutorial"},{"page":5,"tags":["cover_toc","software_tutorial"],"primary":"software_tutorial"},{"page":6,"tags":[],"primary":"none_of_these"},{"page":7,"tags":["overview_specs"],"primary":"overview_specs"},{"page":8,"tags":["overview_specs"],"primary":"overview_specs"},{"page":9,"tags":["overview_specs"],"primary":"overview_specs"},{"page":10,"tags":[],"primary":"overview_specs"},{"page":11,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":12,"tags":["overview_specs"],"primary":"overview_specs"},{"page":13,"tags":[],"primary":"none_of_these"},{"page":14,"tags":["pinout_power_logic"],"primary":"pinout_power_logic"},{"page":15,"tags":["pinout_power_logic"],"primary":"pinout_power_logic"},{"page":16,"tags":["pinout_power_logic"],"primary":"pinout_power_logic"},{"page":17,"tags":["pinout_power_logic"],"primary":"pinout_power_logic"},{"page":18,"tags":["pinout_power_logic"],"primary":"pinout_power_logic"},{"page":19,"tags":["pinout_power_logic"],"primary":"pinout_power_logic"},{"page":20,"tags":[],"primary":"pinout_power_logic"},{"page":21,"tags":["pinout_power_logic"],"primary":"pinout_power_logic"},{"page":22,"tags":["pinout_power_logic"],"primary":"pinout_power_logic"},{"page":23,"tags":["pinout_power_logic"],"primary":"pinout_power_logic"},{"page":24,"tags":["assembly_soldering"],"primary":"assembly_soldering"},{"page":25,"tags":["assembly_soldering"],"primary":"assembly_soldering"},{"page":26,"tags":["assembly_soldering"],"primary":"assembly_soldering"},{"page":27,"tags":[],"primary":"none_of_these"},{"page":28,"tags":["assembly_soldering"],"primary":"assembly_soldering"},{"page":29,"tags":["assembly_soldering"],"primary":"assembly_soldering"},{"page":30,"tags":["assembly_soldering"],"primary":"assembly_soldering"},{"page":31,"tags":["assembly_soldering"],"primary":"assembly_soldering"},{"page":32,"tags":["assembly_soldering"],"primary":"assembly_soldering"},{"page":33,"tags":["assembly_soldering"],"primary":"assembly_soldering"},{"page":34,"tags":["assembly_soldering"],"primary":"assembly_soldering"},{"page":35,"tags":["power_management"],"primary":"power_management"},{"page":36,"tags":["power_management"],"primary":"power_management"},{"page":37,"tags":["power_management"],"primary":"power_management"},{"page":38,"tags":["power_management"],"primary":"power_management"},{"page":39,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":40,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":41,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":42,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":43,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":44,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":45,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":46,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":47,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":48,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":49,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":50,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":51,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":52,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":53,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":54,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":55,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":56,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":57,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":58,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":59,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":60,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":61,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":62,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":63,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":64,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":65,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":66,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":67,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":68,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":69,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":70,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":71,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":72,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":73,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":74,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":75,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":76,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":77,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":78,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":79,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":80,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":81,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":82,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":83,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":84,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":85,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":86,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":87,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":88,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":89,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":90,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":91,"tags":[],"primary":"none_of_these"},{"page":92,"tags":[],"primary":"none_of_these"},{"page":93,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":94,"tags":[],"primary":"none_of_these"},{"page":95,"tags":[],"primary":"none_of_these"},{"page":96,"tags":[],"primary":"none_of_these"},{"page":97,"tags":[],"primary":"none_of_these"},{"page":98,"tags":[],"primary":"none_of_these"},{"page":99,"tags":[],"primary":"none_of_these"},{"page":100,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":101,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":102,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":103,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":104,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":105,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":106,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":107,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":108,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":109,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":110,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":111,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":112,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":113,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":114,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":115,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":116,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":117,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":118,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":119,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":120,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":121,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":122,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":123,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":124,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":125,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":126,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":127,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":128,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":129,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":130,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":131,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":132,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":133,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":134,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":135,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":136,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":137,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":138,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":139,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":140,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":141,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":142,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":143,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":144,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":145,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":146,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":147,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":148,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":149,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":150,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":151,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":152,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":153,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":154,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":155,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":156,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":157,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":158,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":159,"tags":[],"primary":"none_of_these"},{"page":160,"tags":["software_tutorial"],"primary":"software_tutorial"},{"page":161,"tags":["downloads_schematic"],"primary":"downloads_schematic"},{"page":162,"tags":["downloads_schematic"],"primary":"downloads_schematic"},{"page":163,"tags":["downloads_schematic"],"primary":"downloads_schematic"}],"performance":[],"schema_name":"datasheet-1","part_ratings":{"input_voltage":[{"max":5,"min":3.7,"src":{"page":37,"quote":"The two primary ways for powering a feather are a 3.7/4.2V LiPo battery plugged into the JST port or a USB power cable.","method":"derived","fragment":"ratings_board.json"},"unit":"V","category":"operating","parameter":"Supply inputs","conditions":"LiPo 3.7–4.2 V on BAT or 5 V USB"}]}},"use_cases":["battery-portable","custom-io-timing","usb-devices","learning-prototyping"],"commercial":{"other":{},"checked_at":"2026-09-24T14:48:48+00:00","compliance":[],"ordering_codes":[{"code":"4884","description":"Adafruit Feather RP2040"}]},"assembly_label":"Development board","assembly_level":3,"search_aliases":["4884","AdafruitFeatherRP2040"],"children_summary":[{"id":"802ebae8-7009-5d4f-9539-f06c5316b7b5--mcu","part_number":"RP2040","manufacturer":"Raspberry Pi Ltd","role":"main_processor","architecture":"Dual Arm Cortex-M0+","clock_mhz":133,"memory":{"other":{"rom_kb":null},"sram_kb":264}},{"id":"802ebae8-7009-5d4f-9539-f06c5316b7b5--flash","part_number":"W25Q64JVSSIQ","manufacturer":"Winbond","role":"flash_memory","architecture":null,"clock_mhz":null,"memory":null},{"id":"802ebae8-7009-5d4f-9539-f06c5316b7b5--charger","part_number":"MCP73831","manufacturer":"Microchip","role":"battery_charger","architecture":null,"clock_mhz":null,"memory":null},{"id":"802ebae8-7009-5d4f-9539-f06c5316b7b5--neopixel","part_number":"WS2812B","manufacturer":"Worldsemi","role":"rgb_led","architecture":null,"clock_mhz":null,"memory":null}],"design":{"assets":[{"other":{},"kind":"datasheet","url":"https://cdn-learn.adafruit.com/downloads/pdf/adafruit-feather-rp2040-pico.pdf","label":"Datasheet","verification":"manufacturer","notes":null,"resolved_url":"https://cdn-learn.adafruit.com/downloads/pdf/adafruit-feather-rp2040-pico.pdf"},{"other":{},"kind":"image","url":"https://cdn-shop.adafruit.com/970x728/4884-04.jpg","label":"Adafruit Feather RP2040 product photo","verification":"manufacturer","notes":"inspected: shows the actual board (8MB, USB-C, JST, STEMMA QT)","resolved_url":"https://cdn-shop.adafruit.com/970x728/4884-04.jpg"},{"other":{},"kind":"cad","url":"feather-rp2040.step","label":"STEP (generated from datasheet drawing)","verification":"generated","notes":"cad_check passed","resolved_url":"https://wlrumvsjnliyuuvzwnrt.supabase.co/storage/v1/object/public/geometry/feather-rp2040.step"}],"cad":{"verification":"generated","envelope_complete":false,"assumptions":["thickness=1.6 mm assumed: PCB thickness is not printed in the guide or fab print; 1.6 mm assumed (the overall 7 mm height is sourced)","feature USB-C + JST envelope (overall height 7 mm): footprint of the tallest parts (USB-C, JST) read from the photo; height = 7 mm overall − 1.6 mm PCB"],"step_path":"feather-rp2040.step","mesh_path":"feather-rp2040.stl","footprint_svg_path":null,"bbox":{"length_mm":50.8,"width_mm":22.86,"height_mm":7},"features":[],"step_url":"https://wlrumvsjnliyuuvzwnrt.supabase.co/storage/v1/object/public/geometry/feather-rp2040.step","mesh_url":"https://wlrumvsjnliyuuvzwnrt.supabase.co/storage/v1/object/public/geometry/feather-rp2040.stl","footprint_svg_url":null},"limitations":["Generated geometry is an approximate mechanical envelope; inspect original manufacturer CAD when available.","Generated footprint_svg_path is an outline, not a verified electrical land pattern.","Xirkit does not run fit checks; download step_url and test fit against your own enclosure."]}}}