{"publisher":"Xirkit — the structured parts marketplace","canonical":"https://www.xirkit.io/products/adafruit-lsm6ds33-plus-lis3mdl-9-dof-imu-e302","markdown":"https://www.xirkit.io/products/adafruit-lsm6ds33-plus-lis3mdl-9-dof-imu-e302/data.md","mcp":"https://www.xirkit.io/mcp","note":"Every value is traced to a cited source (see sources and per-value src). Null means unknown, never zero.","record":{"id":"e3026a3b-08f2-5968-b934-0a841d604181","mpn":"4485","name":"Adafruit LSM6DS33 + LIS3MDL 9-DoF IMU","manufacturer":"Adafruit Industries","family":"imu","summary":"Adafruit 4485 9-DoF IMU (STEMMA QT): ST LSM6DS33 accel ±2/4/8/16 g + gyro ±125–2000 dps (up to 1.6 kHz ODR, tap / free-fall detection) and ST LIS3MDL magnetometer ±4/8/12/16 gauss on one board — raw 9-axis data for your own AHRS fusion; I2C (accel/gyro 0x6A / 0x6B, magnetometer 0x1C / 0x1D / 0x1E — guide and store differ), 3–5 V supply and logic, 25.6 × 17.8 × 4.6 mm.","schema_version":"3.0","revision":null,"tags":["imu","lsm6ds33 + lis3mdl","9-dof imu","i2c/spi imu","motion sensor","accelerometer","gyroscope","adafruit","robotics","lsm6ds33","lis3mdl","9-dof imu breakout","magnetometer imu","stemma qt imu"],"sources":[{"other":{},"id":"datasheet","url":"https://cdn-learn.adafruit.com/downloads/pdf/st-9-dof-combo.pdf","title":"Adafruit LSM6DS33 + LIS3MDL 9-DoF IMU datasheet","publisher":"Adafruit Industries","kind":"datasheet","retrieved_at":"2026-10-01T12:11:46+00:00","field_paths":["spec.constraints.electrical.io_voltage_v","spec.constraints.electrical.supply_voltage_max_v","spec.constraints.electrical.supply_voltage_min_v","spec.geometry.cad.bbox.height_mm","spec.geometry.cad.bbox.length_mm","spec.geometry.cad.bbox.width_mm","spec.geometry.cad.envelope_complete","spec.geometry.cad.mesh_path","spec.geometry.cad.step_path","spec.geometry.cad.verification","spec.geometry.dimensions.height_mm","spec.geometry.dimensions.length_mm","spec.geometry.dimensions.width_mm","spec.provides.accel_range_g","spec.provides.axes","spec.provides.features","spec.provides.gyro_range_dps","spec.provides.i2c_address","spec.provides.interface","spec.provides.mag_range_ut","spec.provides.output_data_rate_hz","spec.provides.sensor_fusion","spec.provides.sensor_ic","spec.provides.sensor_type","spec.usage.connectors","spec.usage.pinout","spec.usage.pinout_complete"],"notes":"sha256 ac884af2b2b38f16c32de4bed139da6cb338b6b0e7c4a5dc4ae69af3ea63bce0"},{"other":{},"id":"offer0","url":"https://www.adafruit.com/product/4485","title":"www.adafruit.com listing","publisher":null,"kind":"distributor","retrieved_at":"2026-10-01T12:14:51+00:00","field_paths":["offers"],"notes":null}],"assets":[{"other":{},"kind":"datasheet","url":"https://cdn-learn.adafruit.com/downloads/pdf/st-9-dof-combo.pdf","label":"Datasheet","verification":"manufacturer","notes":null},{"other":{},"kind":"image","url":"https://cdn-shop.adafruit.com/970x728/4485-01.jpg","label":"Adafruit LSM6DS33 + LIS3MDL 9-DoF IMU (Adafruit 4485) — store photo","verification":"manufacturer","notes":"store gallery image of the breakout"},{"other":{},"kind":"cad","url":"adafruit-lsm6ds33-lis3mdl-4485.step","label":"STEP (generated from datasheet drawing)","verification":"generated","notes":"cad_check passed"}],"offers":[{"other":{"sku":"4485","price_breaks":[]},"supplier":"www.adafruit.com","url":"https://www.adafruit.com/product/4485","currency":"USD","unit_price":19.95,"stock_status":"out_of_stock","region":"US","minimum_quantity":null,"checked_at":"2026-10-01T12:14:51+00:00","lead_time_days_min":null,"lead_time_days_max":null,"destination":"US","destination_postal_code":null,"notes":null}],"best_for":[{"other":{},"label":"Balance, orientation and motion tracking","reason":"9-axis LSM6DS33 + LIS3MDL gives angular rate and acceleration for balancing, tilt and heading estimation over i2c/spi.","basis":"engineering_inference"}],"children":[{"other":{},"ref_id":"e3026a3b-08f2-5968-b934-0a841d604181--u1","role":"sensor","count":1,"notes":"STMicroelectronics LSM6DS33"},{"other":{},"ref_id":"e3026a3b-08f2-5968-b934-0a841d604181--u2","role":"sensor","count":1,"notes":"STMicroelectronics LIS3MDL"}],"spec":{"other":{},"usage":{"other":{},"pinout":[{"id":"Vin","kind":"power_in","label":"Vin","notes":"this is the power pin. Since the sensor chip uses 3 VDC, we have included a voltage regulator on board that will take 3-5VDC and safely convert it down.","other":{},"functions":["power_in"],"electrical":{}},{"id":"3Vo","kind":"power_out","label":"3Vo","notes":"this is the 3.3V output from the voltage regulator, you can grab up to 100mA from this if you like.","other":{},"functions":["power_out"],"electrical":{}},{"id":"GND","kind":"ground","label":"GND","notes":"common ground for power and logic.","other":{},"functions":["ground"],"voltage_v":0,"electrical":{}},{"id":"SCL","kind":"i2c_scl","label":"SCL","notes":"I2C clock pin, connect to your microcontroller's I2C clock line. This pin is level shifted so you can use 3-5V logic, and there's a 10K pullup on this pin.","other":{},"functions":["scl"],"electrical":{}},{"id":"SDA","kind":"i2c_sda","label":"SDA","notes":"I2C data pin, connect to your microcontroller's I2C data line. This pin is level shifted so you can use 3-5V logic, and there's a 10K pullup on this pin.","other":{},"functions":["sda"],"electrical":{}},{"id":"ADM","kind":"address","label":"ADM","notes":"LIS3MDL Magnetometer I2C address pin. Pulling this pin high or bridging the solder jumper on the back will change the I2C address from 0x1C to 0x1E.","other":{},"functions":["adm"],"electrical":{}},{"id":"AGAD","kind":"address","label":"AGAD","notes":"LSM6DS33 Accel/Gyro I2C address pin. Pulling this pin high or bridging the solder jumper on the back will change the I2C address from 0x6A to 0x6B.","other":{},"functions":["agad"],"electrical":{}},{"id":"INT1","kind":"interrupt","label":"INT1","notes":"This is the primary interrupt pin for the Accel/Gyro. You can setup the LSM6DS33 to pull this low when certain conditions are met such as new measurement data being available. Consult the datasheet (https://adafru.it/HFU) for usage.","other":{},"functions":["int1"],"electrical":{}},{"id":"INTM","kind":"interrupt","label":"INTM","notes":"This is the primary interrupt pin for the Magnetometer. You can setup the LIS3MDL to pull this low when certain conditions are met such as a value exceeding a threshold. Consult the datasheet (https://adafru.it/IbR) for usage.","other":{},"functions":["intm"],"electrical":{}},{"id":"DRDY","kind":"interrupt","label":"DRDY","notes":"The data ready pin. When measurement data is available the sensor will pull this pin low.","other":{},"functions":["drdy"],"electrical":{}}],"derived":{},"connectors":[{"id":"stemma_qt","kind":"STEMMA QT / Qwiic I2C (JST SH 4-pin), two connectors","other":{},"pin_count":4}],"pin_mappings":[],"requirements":{"other":{},"data_inputs":[],"power_inputs":[]},"pinout_complete":true},"geometry":{"cad":{"bbox":{"width_mm":17.8,"height_mm":4.6,"length_mm":25.6},"features":[],"mesh_path":"adafruit-lsm6ds33-lis3mdl-4485.stl","step_path":"adafruit-lsm6ds33-lis3mdl-4485.step","assumptions":[],"verification":"generated","envelope_complete":true},"other":{},"derived":{},"dimensions":{"other":{},"width_mm":17.8,"height_mm":4.6,"length_mm":25.6},"feature_boxes":[],"mounting_holes":[]},"provides":{"axes":9,"other":{},"derived":{},"features":["Two ST sensors on one board: LSM6DS33 accel/gyro + LIS3MDL magnetometer","Tap / double-tap and free-fall detection (LSM6DS33)","Magnetometer interrupt generator, continuous and single-conversion modes (LIS3MDL)"],"interface":"i2c/spi","sensor_ic":"LSM6DS33 + LIS3MDL","i2c_address":"accel/gyro 0x6A (0x6B); magnetometer 0x1C (0x1E) per guide — store lists 0x1D or 0x1E","sensor_type":"imu_9dof","capabilities":[],"mag_range_ut":1600,"accel_range_g":16,"sensor_fusion":false,"gyro_range_dps":2000,"output_data_rate_hz":1600},"compliance":{"other":{},"derived":{},"certifications":[]},"constraints":{"other":{},"derived":{},"thermal":{"other":{}},"electrical":{"other":{},"io_voltage_v":5,"supply_voltage_max_v":5,"supply_voltage_min_v":3}}},"other":null,"source_type":"pdf","source_ref":"https://cdn-learn.adafruit.com/downloads/pdf/st-9-dof-combo.pdf","datasheet":{"cad":{"bbox":{"max":[25.6,17.8,4.6],"min":[0,0,0],"width_mm":17.8,"height_mm":4.6,"length_mm":25.6},"check":{"failed":[],"passed":true},"expected":[{"x":25.6,"y":17.8,"name":"envelope","what":"box_xy"},{"what":"envelope_z","value":4.6}],"archetype":"envelope_box","mesh_path":"/Users/sumeet/Documents/Xirkit Parent/XirkitOnboard/work/adafruit-lsm6ds33-lis3mdl-4485/07_cad/part.stl","step_path":"/Users/sumeet/Documents/Xirkit Parent/XirkitOnboard/work/adafruit-lsm6ds33-lis3mdl-4485/07_cad/part.step","views_png":"/Users/sumeet/Documents/Xirkit Parent/XirkitOnboard/work/adafruit-lsm6ds33-lis3mdl-4485/07_cad/views.png","export_stl":"adafruit-lsm6ds33-lis3mdl-4485.stl","assumptions":[],"export_step":"adafruit-lsm6ds33-lis3mdl-4485.step","envelope_complete":true},"chips":[{"id":"u1","mpn":"LSM6DS33","src":{"page":47,"quote":"LSM6DS33 Specifications:","method":"text"},"role":"sensor","manufacturer":"STMicroelectronics"},{"id":"u2","mpn":"LIS3MDL","src":{"page":47,"quote":"- ±4/±8/±12/±16 gauss selectable magnetic full scales","method":"text"},"role":"sensor","manufacturer":"STMicroelectronics"}],"fields":{"axes":{"src":{"page":42,"quote":"# Adafruit LSM6DS33 + LIS3MDL - 9 DoF IMU with Accel / Gyro / Mag - STEMMA QT Qwiic","method":"text"},"unit":null,"value":9},"connector":{"src":{"page":13,"quote":"• STEMMA QT (https://adafru.it/Ft4) - These connectors allow you to make I2C","method":"text"},"unit":null,"value":"2× STEMMA QT / Qwiic (JST SH 4-pin) + 0.1″ header pads"},"interface":{"src":{"page":12,"quote":"• SCL - I2C clock pin, connect to your microcontroller's I2C clock line. This pin is","method":"text"},"unit":null,"value":"i2c/spi"},"mag_range":{"src":{"page":47,"quote":"- ±4/±8/±12/±16 gauss selectable magnetic full scales","method":"text"},"orig":{"unit":"gauss","value":16},"unit":"µT","value":1600},"sensor_ic":{"src":{"page":42,"quote":"# Adafruit LSM6DS33 + LIS3MDL - 9 DoF IMU with Accel / Gyro / Mag - STEMMA QT Qwiic","method":"text"},"unit":null,"value":"LSM6DS33 + LIS3MDL"},"gyro_range":{"src":{"page":47,"quote":"- ±125/±250/±500/±1000/±2000 dps full scale","method":"text"},"unit":"°/s","value":2000},"accel_range":{"src":{"page":47,"quote":"- ±2/±4/±8/±16 g full scale","method":"text"},"unit":"gn","value":16},"i2c_address":{"src":{"page":13,"quote":"the solder jumper on the back will change the I2C address from 0x1C to 0x1E.","method":"text"},"unit":null,"value":"accel/gyro 0x6A (0x6B); magnetometer 0x1C (0x1E) per guide — store lists 0x1D or 0x1E"},"sensor_type":{"src":{"page":42,"quote":"# Adafruit LSM6DS33 + LIS3MDL - 9 DoF IMU with Accel / Gyro / Mag - STEMMA QT Qwiic","method":"text"},"unit":null,"value":"imu_9dof"},"logic_voltage":{"src":{"page":12,"quote":"level shifted so you can use 3-5V logic, and there's a 10K pullup on this pin.","method":"text"},"unit":"V","value":5},"sensor_fusion":{"src":{"page":42,"quote":"# Adafruit LSM6DS33 + LIS3MDL - 9 DoF IMU with Accel / Gyro / Mag - STEMMA QT Qwiic","method":"text"},"unit":null,"value":false},"supply_voltage":{"src":{"page":12,"quote":"a voltage regulator on board that will take 3-5VDC and safely convert it down.","method":"text"},"unit":"V","value":[3,5]},"output_data_rate":{"src":{"page":47,"quote":"- Up to 1.6 KHz ODR","method":"text"},"orig":{"unit":"kHz","value":1.6},"unit":"Hz","value":1600}},"groups":{"all":["Vin","3Vo","GND","SCL","SDA","ADM","AGAD","INT1","INTM","DRDY"]},"source":{"url":"https://cdn-learn.adafruit.com/downloads/pdf/st-9-dof-combo.pdf","pages":52,"sha256":"ac884af2b2b38f16c32de4bed139da6cb338b6b0e7c4a5dc4ae69af3ea63bce0","onboarded_at":"2026-10-01T12:15:21+00:00"},"coverage":{"pct":92.9,"score":"26/28","passed":true,"explained_nulls":["accel_noise","gyro_noise","supply_current","operating_temperature","weight","thickness"]},"entities":[{"id":"Vin","attrs":{"kind":"power_in","label":"Vin","designator":"Vin","description":"this is the power pin. Since the sensor chip uses 3 VDC, we have included a voltage regulator on board that will take 3-5VDC and safely convert it down."},"sources":[{"page":12,"quote":"• Vin - this is the power pin. Since the sensor chip uses 3 VDC, we have included a voltage regulator on board that will take 3-5VDC and safely convert it down.","method":"text","fragment":"entities_pins.json"}],"attr_src":{"kind":{"page":12,"quote":"• Vin - this is the power pin. Since the sensor chip uses 3 VDC, we have included a voltage regulator on board that will take 3-5VDC and safely convert it down.","method":"text","fragment":"entities_pins.json"},"label":{"page":12,"quote":"• Vin - this is the power pin. Since the sensor chip uses 3 VDC, we have included a voltage regulator on board that will take 3-5VDC and safely convert it down.","method":"text","fragment":"entities_pins.json"},"designator":{"page":12,"quote":"• Vin - this is the power pin. Since the sensor chip uses 3 VDC, we have included a voltage regulator on board that will take 3-5VDC and safely convert it down.","method":"text","fragment":"entities_pins.json"},"description":{"page":12,"quote":"• Vin - this is the power pin. Since the sensor chip uses 3 VDC, we have included a voltage regulator on board that will take 3-5VDC and safely convert it down.","method":"text","fragment":"entities_pins.json"}},"functions":[],"electrical":{},"entity_type":"pin"},{"id":"3Vo","attrs":{"kind":"power_out","label":"3Vo","designator":"3Vo","description":"this is the 3.3V output from the voltage regulator, you can grab up to 100mA from this if you like."},"sources":[{"page":12,"quote":"• 3Vo - this is the 3.3V output from the voltage regulator, you can grab up to 100mA from this if you like.","method":"text","fragment":"entities_pins.json"}],"attr_src":{"kind":{"page":12,"quote":"• 3Vo - this is the 3.3V output from the voltage regulator, you can grab up to 100mA from this if you like.","method":"text","fragment":"entities_pins.json"},"label":{"page":12,"quote":"• 3Vo - this is the 3.3V output from the voltage regulator, you can grab up to 100mA from this if you like.","method":"text","fragment":"entities_pins.json"},"designator":{"page":12,"quote":"• 3Vo - this is the 3.3V output from the voltage regulator, you can grab up to 100mA from this if you like.","method":"text","fragment":"entities_pins.json"},"description":{"page":12,"quote":"• 3Vo - this is the 3.3V output from the voltage regulator, you can grab up to 100mA from this if you like.","method":"text","fragment":"entities_pins.json"}},"functions":[],"electrical":{},"entity_type":"pin"},{"id":"GND","attrs":{"kind":"ground","label":"GND","designator":"GND","description":"common ground for power and logic."},"sources":[{"page":12,"quote":"• GND - common ground for power and logic.","method":"text","fragment":"entities_pins.json"}],"attr_src":{"kind":{"page":12,"quote":"• GND - common ground for power and logic.","method":"text","fragment":"entities_pins.json"},"label":{"page":12,"quote":"• GND - common ground for power and logic.","method":"text","fragment":"entities_pins.json"},"designator":{"page":12,"quote":"• GND - common ground for power and logic.","method":"text","fragment":"entities_pins.json"},"description":{"page":12,"quote":"• GND - common ground for power and logic.","method":"text","fragment":"entities_pins.json"}},"functions":[],"electrical":{},"entity_type":"pin"},{"id":"SCL","attrs":{"kind":"i2c_scl","label":"SCL","designator":"SCL","description":"I2C clock pin, connect to your microcontroller's I2C clock line. This pin is level shifted so you can use 3-5V logic, and there's a 10K pullup on this pin."},"sources":[{"page":12,"quote":"• SCL - I2C clock pin, connect to your microcontroller's I2C clock line. This pin is level shifted so you can use 3-5V logic, and there's a 10K pullup on this pin.","method":"text","fragment":"entities_pins.json"}],"attr_src":{"kind":{"page":12,"quote":"• SCL - I2C clock pin, connect to your microcontroller's I2C clock line. This pin is level shifted so you can use 3-5V logic, and there's a 10K pullup on this pin.","method":"text","fragment":"entities_pins.json"},"label":{"page":12,"quote":"• SCL - I2C clock pin, connect to your microcontroller's I2C clock line. This pin is level shifted so you can use 3-5V logic, and there's a 10K pullup on this pin.","method":"text","fragment":"entities_pins.json"},"designator":{"page":12,"quote":"• SCL - I2C clock pin, connect to your microcontroller's I2C clock line. This pin is level shifted so you can use 3-5V logic, and there's a 10K pullup on this pin.","method":"text","fragment":"entities_pins.json"},"description":{"page":12,"quote":"• SCL - I2C clock pin, connect to your microcontroller's I2C clock line. This pin is level shifted so you can use 3-5V logic, and there's a 10K pullup on this pin.","method":"text","fragment":"entities_pins.json"}},"functions":[],"electrical":{},"entity_type":"pin"},{"id":"SDA","attrs":{"kind":"i2c_sda","label":"SDA","designator":"SDA","description":"I2C data pin, connect to your microcontroller's I2C data line. This pin is level shifted so you can use 3-5V logic, and there's a 10K pullup on this pin."},"sources":[{"page":12,"quote":"• SDA - I2C data pin, connect to your microcontroller's I2C data line. This pin is level shifted so you can use 3-5V logic, and there's a 10K pullup on this pin.","method":"text","fragment":"entities_pins.json"}],"attr_src":{"kind":{"page":12,"quote":"• SDA - I2C data pin, connect to your microcontroller's I2C data line. This pin is level shifted so you can use 3-5V logic, and there's a 10K pullup on this pin.","method":"text","fragment":"entities_pins.json"},"label":{"page":12,"quote":"• SDA - I2C data pin, connect to your microcontroller's I2C data line. This pin is level shifted so you can use 3-5V logic, and there's a 10K pullup on this pin.","method":"text","fragment":"entities_pins.json"},"designator":{"page":12,"quote":"• SDA - I2C data pin, connect to your microcontroller's I2C data line. This pin is level shifted so you can use 3-5V logic, and there's a 10K pullup on this pin.","method":"text","fragment":"entities_pins.json"},"description":{"page":12,"quote":"• SDA - I2C data pin, connect to your microcontroller's I2C data line. This pin is level shifted so you can use 3-5V logic, and there's a 10K pullup on this pin.","method":"text","fragment":"entities_pins.json"}},"functions":[],"electrical":{},"entity_type":"pin"},{"id":"ADM","attrs":{"kind":"address","label":"ADM","designator":"ADM","description":"LIS3MDL Magnetometer I2C address pin. Pulling this pin high or bridging the solder jumper on the back will change the I2C address from 0x1C to 0x1E."},"sources":[{"page":13,"quote":"• ADM - LIS3MDL Magnetometer I2C address pin. Pulling this pin high or bridging the solder jumper on the back will change the I2C address from 0x1C to 0x1E.","method":"text","fragment":"entities_pins.json"}],"attr_src":{"kind":{"page":13,"quote":"• ADM - LIS3MDL Magnetometer I2C address pin. Pulling this pin high or bridging the solder jumper on the back will change the I2C address from 0x1C to 0x1E.","method":"text","fragment":"entities_pins.json"},"label":{"page":13,"quote":"• ADM - LIS3MDL Magnetometer I2C address pin. Pulling this pin high or bridging the solder jumper on the back will change the I2C address from 0x1C to 0x1E.","method":"text","fragment":"entities_pins.json"},"designator":{"page":13,"quote":"• ADM - LIS3MDL Magnetometer I2C address pin. Pulling this pin high or bridging the solder jumper on the back will change the I2C address from 0x1C to 0x1E.","method":"text","fragment":"entities_pins.json"},"description":{"page":13,"quote":"• ADM - LIS3MDL Magnetometer I2C address pin. Pulling this pin high or bridging the solder jumper on the back will change the I2C address from 0x1C to 0x1E.","method":"text","fragment":"entities_pins.json"}},"functions":[],"electrical":{},"entity_type":"pin"},{"id":"AGAD","attrs":{"kind":"address","label":"AGAD","designator":"AGAD","description":"LSM6DS33 Accel/Gyro I2C address pin. Pulling this pin high or bridging the solder jumper on the back will change the I2C address from 0x6A to 0x6B."},"sources":[{"page":13,"quote":"• AGAD - LSM6DS33 Accel/Gyro I2C address pin. Pulling this pin high or bridging the solder jumper on the back will change the I2C address from 0x6A to 0x6B.","method":"text","fragment":"entities_pins.json"}],"attr_src":{"kind":{"page":13,"quote":"• AGAD - LSM6DS33 Accel/Gyro I2C address pin. Pulling this pin high or bridging the solder jumper on the back will change the I2C address from 0x6A to 0x6B.","method":"text","fragment":"entities_pins.json"},"label":{"page":13,"quote":"• AGAD - LSM6DS33 Accel/Gyro I2C address pin. Pulling this pin high or bridging the solder jumper on the back will change the I2C address from 0x6A to 0x6B.","method":"text","fragment":"entities_pins.json"},"designator":{"page":13,"quote":"• AGAD - LSM6DS33 Accel/Gyro I2C address pin. Pulling this pin high or bridging the solder jumper on the back will change the I2C address from 0x6A to 0x6B.","method":"text","fragment":"entities_pins.json"},"description":{"page":13,"quote":"• AGAD - LSM6DS33 Accel/Gyro I2C address pin. Pulling this pin high or bridging the solder jumper on the back will change the I2C address from 0x6A to 0x6B.","method":"text","fragment":"entities_pins.json"}},"functions":[],"electrical":{},"entity_type":"pin"},{"id":"INT1","attrs":{"kind":"interrupt","label":"INT1","designator":"INT1","description":"This is the primary interrupt pin for the Accel/Gyro. You can setup the LSM6DS33 to pull this low when certain conditions are met such as new measurement data being available. Consult the datasheet (https://adafru.it/HFU) for usage."},"sources":[{"page":13,"quote":"• INT1 -This is the primary interrupt pin for the Accel/Gyro. You can setup the LSM6DS33 to pull this low when certain conditions are met such as new measurement data being available. Consult the datasheet (https://adafru.it/HFU) for usage.","method":"text","fragment":"entities_pins.json"}],"attr_src":{"kind":{"page":13,"quote":"• INT1 -This is the primary interrupt pin for the Accel/Gyro. You can setup the LSM6DS33 to pull this low when certain conditions are met such as new measurement data being available. Consult the datasheet (https://adafru.it/HFU) for usage.","method":"text","fragment":"entities_pins.json"},"label":{"page":13,"quote":"• INT1 -This is the primary interrupt pin for the Accel/Gyro. You can setup the LSM6DS33 to pull this low when certain conditions are met such as new measurement data being available. Consult the datasheet (https://adafru.it/HFU) for usage.","method":"text","fragment":"entities_pins.json"},"designator":{"page":13,"quote":"• INT1 -This is the primary interrupt pin for the Accel/Gyro. You can setup the LSM6DS33 to pull this low when certain conditions are met such as new measurement data being available. Consult the datasheet (https://adafru.it/HFU) for usage.","method":"text","fragment":"entities_pins.json"},"description":{"page":13,"quote":"• INT1 -This is the primary interrupt pin for the Accel/Gyro. You can setup the LSM6DS33 to pull this low when certain conditions are met such as new measurement data being available. Consult the datasheet (https://adafru.it/HFU) for usage.","method":"text","fragment":"entities_pins.json"}},"functions":[],"electrical":{},"entity_type":"pin"},{"id":"INTM","attrs":{"kind":"interrupt","label":"INTM","designator":"INTM","description":"This is the primary interrupt pin for the Magnetometer. You can setup the LIS3MDL to pull this low when certain conditions are met such as a value exceeding a threshold. Consult the datasheet (https://adafru.it/IbR) for usage."},"sources":[{"page":13,"quote":"• INTM - This is the primary interrupt pin for the Magnetometer. You can setup the LIS3MDL to pull this low when certain conditions are met such as a value exceeding a threshold. Consult the datasheet (https://adafru.it/IbR) for usage.","method":"text","fragment":"entities_pins.json"}],"attr_src":{"kind":{"page":13,"quote":"• INTM - This is the primary interrupt pin for the Magnetometer. You can setup the LIS3MDL to pull this low when certain conditions are met such as a value exceeding a threshold. Consult the datasheet (https://adafru.it/IbR) for usage.","method":"text","fragment":"entities_pins.json"},"label":{"page":13,"quote":"• INTM - This is the primary interrupt pin for the Magnetometer. You can setup the LIS3MDL to pull this low when certain conditions are met such as a value exceeding a threshold. Consult the datasheet (https://adafru.it/IbR) for usage.","method":"text","fragment":"entities_pins.json"},"designator":{"page":13,"quote":"• INTM - This is the primary interrupt pin for the Magnetometer. You can setup the LIS3MDL to pull this low when certain conditions are met such as a value exceeding a threshold. Consult the datasheet (https://adafru.it/IbR) for usage.","method":"text","fragment":"entities_pins.json"},"description":{"page":13,"quote":"• INTM - This is the primary interrupt pin for the Magnetometer. You can setup the LIS3MDL to pull this low when certain conditions are met such as a value exceeding a threshold. Consult the datasheet (https://adafru.it/IbR) for usage.","method":"text","fragment":"entities_pins.json"}},"functions":[],"electrical":{},"entity_type":"pin"},{"id":"DRDY","attrs":{"kind":"interrupt","label":"DRDY","designator":"DRDY","description":"The data ready pin. When measurement data is available the sensor will pull this pin low."},"sources":[{"page":13,"quote":"• DRDY - The data ready pin. When measurement data is available the sensor will pull this pin low.","method":"text","fragment":"entities_pins.json"}],"attr_src":{"kind":{"page":13,"quote":"• DRDY - The data ready pin. When measurement data is available the sensor will pull this pin low.","method":"text","fragment":"entities_pins.json"},"label":{"page":13,"quote":"• DRDY - The data ready pin. When measurement data is available the sensor will pull this pin low.","method":"text","fragment":"entities_pins.json"},"designator":{"page":13,"quote":"• DRDY - The data ready pin. When measurement data is available the sensor will pull this pin low.","method":"text","fragment":"entities_pins.json"},"description":{"page":13,"quote":"• DRDY - The data ready pin. When measurement data is available the sensor will pull this pin low.","method":"text","fragment":"entities_pins.json"}},"functions":[],"electrical":{},"entity_type":"pin"}],"taxonomy":{"pinouts":{"role":"pins_or_terminals","definition":"Pinout section naming each pin / pad (VIN, 3Vo, GND, SCL, SDA, INT, RST, CS, address jumpers) and what it does"},"schematic":{"role":"pins_or_terminals","definition":"Schematic or downloads page"},"code_usage":{"role":"software_usage","definition":"Arduino / CircuitPython / Python wiring, library install and example code"},"dimensions":{"role":"mechanical_dimensions","definition":"Fab print / board dimensions, mounting holes"},"site_chrome":{"role":"other","definition":"Navigation, related products, footers, page headers"},"specifications":{"role":"electrical_ratings","definition":"Sensor specifications: axes, accelerometer / gyro / magnetometer ranges, data rates, noise, fusion outputs, supply, interface, I2C address"},"pricing_ordering":{"role":"ordering_commercial","definition":"Store page: price, product ID, stock, technical details"},"product_overview":{"role":"identity_overview","definition":"Overview of the breakout: sensor chip, what it measures, fusion features, STEMMA QT"}},"variants":{},"commercial":{"other":{},"checked_at":"2026-10-01T12:14:51+00:00","compliance":[],"ordering_codes":[{"code":"4485","description":"Adafruit product ID"}]},"mechanical":{"dims":{"width":{"src":{"page":47,"quote":"Product Dimensions: 25.6mm x 17.8mm x 4.6mm / 1.0\" x 0.7\" x 0.2\"","method":"text"},"unit":"mm","value":17.8},"height":{"src":{"page":47,"quote":"Product Dimensions: 25.6mm x 17.8mm x 4.6mm / 1.0\" x 0.7\" x 0.2\"","method":"text"},"unit":"mm","value":4.6},"length":{"src":{"page":47,"quote":"Product Dimensions: 25.6mm x 17.8mm x 4.6mm / 1.0\" x 0.7\" x 0.2\"","method":"text"},"unit":"mm","value":25.6}},"kind":"mechanical","holes":[],"units":"mm","origin":"product envelope from (0,0,0)","features":[],"archetype":"envelope_box","assumptions":{}},"page_index":[{"page":1,"tags":["site_chrome"],"primary":"site_chrome"},{"page":2,"tags":["code_usage"],"primary":"site_chrome"},{"page":3,"tags":["schematic"],"primary":"schematic"},{"page":4,"tags":["site_chrome"],"primary":"site_chrome"},{"page":5,"tags":["product_overview"],"primary":"product_overview"},{"page":6,"tags":["specifications"],"primary":"specifications"},{"page":7,"tags":["product_overview"],"primary":"product_overview"},{"page":8,"tags":["product_overview"],"primary":"product_overview"},{"page":9,"tags":["pinouts"],"primary":"pinouts"},{"page":10,"tags":["pinouts"],"primary":"pinouts"},{"page":11,"tags":["pinouts"],"primary":"pinouts"},{"page":12,"tags":["pinouts"],"primary":"pinouts"},{"page":13,"tags":["pinouts"],"primary":"pinouts"},{"page":14,"tags":["pinouts"],"primary":"pinouts"},{"page":15,"tags":["specifications"],"primary":"specifications"},{"page":16,"tags":["pinouts"],"primary":"pinouts"},{"page":17,"tags":["code_usage"],"primary":"code_usage"},{"page":18,"tags":["code_usage"],"primary":"code_usage"},{"page":19,"tags":["site_chrome"],"primary":"site_chrome"},{"page":20,"tags":["code_usage"],"primary":"code_usage"},{"page":21,"tags":["code_usage"],"primary":"code_usage"},{"page":22,"tags":["code_usage"],"primary":"code_usage"},{"page":23,"tags":["code_usage"],"primary":"code_usage"},{"page":24,"tags":["code_usage"],"primary":"code_usage"},{"page":25,"tags":["code_usage"],"primary":"code_usage"},{"page":26,"tags":["code_usage","site_chrome"],"primary":"code_usage"},{"page":27,"tags":["pinouts"],"primary":"pinouts"},{"page":28,"tags":["site_chrome"],"primary":"site_chrome"},{"page":29,"tags":["code_usage"],"primary":"code_usage"},{"page":30,"tags":[],"primary":"code_usage"},{"page":31,"tags":["code_usage"],"primary":"code_usage"},{"page":32,"tags":["code_usage"],"primary":"code_usage"},{"page":33,"tags":["code_usage"],"primary":"code_usage"},{"page":34,"tags":["code_usage"],"primary":"code_usage"},{"page":35,"tags":["schematic"],"primary":"schematic"},{"page":36,"tags":["dimensions","schematic"],"primary":"schematic"},{"page":37,"tags":["dimensions","schematic"],"primary":"schematic"},{"page":38,"tags":["dimensions","schematic"],"primary":"schematic"},{"page":39,"tags":["dimensions","schematic"],"primary":"schematic"},{"page":40,"tags":["dimensions","schematic"],"primary":"schematic"},{"page":41,"tags":["product_overview","site_chrome"],"primary":"product_overview"},{"page":42,"tags":["product_overview"],"primary":"product_overview"},{"page":43,"tags":["pricing_ordering"],"primary":"pricing_ordering"},{"page":44,"tags":["pricing_ordering"],"primary":"pricing_ordering"},{"page":45,"tags":[],"primary":"none_of_these"},{"page":46,"tags":["product_overview"],"primary":"product_overview"},{"page":47,"tags":["specifications"],"primary":"specifications"},{"page":48,"tags":[],"primary":"none_of_these"},{"page":49,"tags":["site_chrome"],"primary":"site_chrome"},{"page":50,"tags":[],"primary":"pricing_ordering"},{"page":51,"tags":["product_overview"],"primary":"product_overview"},{"page":52,"tags":[],"primary":"pricing_ordering"}],"performance":[],"schema_name":"datasheet-1","part_ratings":{}},"use_cases":["balance-orientation"],"commercial":{"other":{},"checked_at":"2026-10-01T12:14:51+00:00","compliance":[],"ordering_codes":[{"code":"4485","description":"Adafruit product ID"}]},"assembly_label":"Module","assembly_level":2,"search_aliases":["LSM6DS33 + LIS3MDL breakout","9-DoF LSM6DS33 + LIS3MDL IMU","4485","Adafruit 4485","LSM6DS33 LIS3MDL"],"children_summary":[{"id":"e3026a3b-08f2-5968-b934-0a841d604181--u1","part_number":"LSM6DS33","manufacturer":"STMicroelectronics","role":"sensor","architecture":null,"clock_mhz":null,"memory":null},{"id":"e3026a3b-08f2-5968-b934-0a841d604181--u2","part_number":"LIS3MDL","manufacturer":"STMicroelectronics","role":"sensor","architecture":null,"clock_mhz":null,"memory":null}],"design":{"assets":[{"other":{},"kind":"datasheet","url":"https://cdn-learn.adafruit.com/downloads/pdf/st-9-dof-combo.pdf","label":"Datasheet","verification":"manufacturer","notes":null,"resolved_url":"https://cdn-learn.adafruit.com/downloads/pdf/st-9-dof-combo.pdf"},{"other":{},"kind":"image","url":"https://cdn-shop.adafruit.com/970x728/4485-01.jpg","label":"Adafruit LSM6DS33 + LIS3MDL 9-DoF IMU (Adafruit 4485) — store photo","verification":"manufacturer","notes":"store gallery image of the breakout","resolved_url":"https://cdn-shop.adafruit.com/970x728/4485-01.jpg"},{"other":{},"kind":"cad","url":"adafruit-lsm6ds33-lis3mdl-4485.step","label":"STEP (generated from datasheet drawing)","verification":"generated","notes":"cad_check passed","resolved_url":"https://wlrumvsjnliyuuvzwnrt.supabase.co/storage/v1/object/public/geometry/adafruit-lsm6ds33-lis3mdl-4485.step"}],"cad":{"verification":"generated","envelope_complete":true,"assumptions":[],"step_path":"adafruit-lsm6ds33-lis3mdl-4485.step","mesh_path":"adafruit-lsm6ds33-lis3mdl-4485.stl","footprint_svg_path":null,"bbox":{"length_mm":25.6,"width_mm":17.8,"height_mm":4.6},"features":[],"step_url":"https://wlrumvsjnliyuuvzwnrt.supabase.co/storage/v1/object/public/geometry/adafruit-lsm6ds33-lis3mdl-4485.step","mesh_url":"https://wlrumvsjnliyuuvzwnrt.supabase.co/storage/v1/object/public/geometry/adafruit-lsm6ds33-lis3mdl-4485.stl","footprint_svg_url":null},"limitations":["Generated geometry is an approximate mechanical envelope; inspect original manufacturer CAD when available.","Generated footprint_svg_path is an outline, not a verified electrical land pattern.","Xirkit does not run fit checks; download step_url and test fit against your own enclosure."]}}}