{"publisher":"Xirkit — the structured parts marketplace","canonical":"https://www.xirkit.io/products/arduino-nano-rp2040-connect-e1b2","markdown":"https://www.xirkit.io/products/arduino-nano-rp2040-connect-e1b2/data.md","mcp":"https://www.xirkit.io/mcp","note":"Every value is traced to a cited source (see sources and per-value src). Null means unknown, never zero.","record":{"id":"e1b2873b-8a98-5d75-a639-d8022b5e81a3","mpn":"ABX00052","name":"Arduino Nano RP2040 Connect","manufacturer":"Arduino S.r.l.","family":"dev_board","summary":"Nano-format RP2040 board (dual M0+ 133 MHz, 264 kB SRAM, 16 MB QSPI flash) with u-blox NINA-W102 (ESP32) Wi-Fi 4 / Bluetooth 4.2, ST LSM6DSOX 6-axis IMU with machine-learning core, MP34DT06 PDM microphone, ATECC608A crypto, RGB LED, 3.3 V IO, 4–20 V VIN buck (800 mA 3V3) — motion-aware robot/IoT node.","schema_version":"3.0","revision":null,"tags":["dev_board","wifi","bluetooth","iot","sensors","tinyml","ethernet","pio","native usb","beginner friendly","rp2040","arduino","microcontroller","development board","i2c","spi","uart"],"sources":[{"other":{},"id":"datasheet","url":"https://docs.arduino.cc/resources/datasheets/ABX00053-datasheet.pdf","title":"Arduino Nano RP2040 Connect datasheet","publisher":"Arduino S.r.l.","kind":"datasheet","retrieved_at":"2026-09-24T21:19:35+00:00","field_paths":["spec.compliance.certifications","spec.constraints.electrical.io_voltage_v","spec.constraints.electrical.logic_high_min_v","spec.constraints.electrical.pin_drive_max_ma","spec.constraints.electrical.supply_voltage_max_v","spec.constraints.electrical.supply_voltage_min_v","spec.constraints.electrical.supply_voltage_nominal_v","spec.constraints.thermal.operating_temp_max_c","spec.constraints.thermal.operating_temp_min_c","spec.geometry.cad.assumptions","spec.geometry.cad.bbox.height_mm","spec.geometry.cad.bbox.length_mm","spec.geometry.cad.bbox.width_mm","spec.geometry.cad.envelope_complete","spec.geometry.cad.mesh_path","spec.geometry.cad.step_path","spec.geometry.cad.verification","spec.geometry.dimensions.length_mm","spec.geometry.dimensions.width_mm","spec.geometry.feature_boxes","spec.geometry.mounting_holes","spec.provides.capabilities","spec.provides.features","spec.provides.gpio_count","spec.provides.memory.flash_kb","spec.provides.memory.sram_kb","spec.provides.software_frameworks","spec.provides.wireless","spec.usage.connectors","spec.usage.pin_mappings","spec.usage.pinout","spec.usage.pinout_complete","spec.usage.requirements.power_inputs"],"notes":"sha256 585aa55085ab337a13b6d7f78b736ce5ac927b163a183251ad42556b13fa57e8"},{"other":{},"id":"offer0","url":"https://store-usa.arduino.cc/products/arduino-nano-rp2040-connect","title":"Arduino Store (USA) listing","publisher":null,"kind":"distributor","retrieved_at":"2026-09-24T21:25:10+00:00","field_paths":["offers"],"notes":null}],"assets":[{"other":{},"kind":"datasheet","url":"https://docs.arduino.cc/resources/datasheets/ABX00053-datasheet.pdf","label":"Datasheet","verification":"manufacturer","notes":null},{"other":{},"kind":"image","url":"https://store-usa.arduino.cc/cdn/shop/files/ABX00052_03.front_1200x900.jpg?v=1727105009","label":"Arduino Nano RP2040 Connect (official store photo)","verification":"manufacturer","notes":"inspected: shows the actual Nano RP2040 Connect (RP2040, NINA-W102, micro-USB, castellated pads, no headers); saved at work/arduino-nano-rp2040-connect/images/"},{"other":{},"kind":"cad","url":"arduino-nano-rp2040-connect.step","label":"STEP (generated from datasheet drawing)","verification":"generated","notes":"cad_check passed"}],"offers":[{"other":{"sku":"ABX00052","price_breaks":[]},"supplier":"Arduino Store (USA)","url":"https://store-usa.arduino.cc/products/arduino-nano-rp2040-connect","currency":"USD","unit_price":21.3,"stock_status":"in_stock","region":"US","minimum_quantity":null,"checked_at":"2026-09-24T21:25:10+00:00","lead_time_days_min":null,"lead_time_days_max":null,"destination":"US","destination_postal_code":null,"notes":null}],"best_for":[{"other":{},"label":"Connected IoT devices and wireless sensor nodes","reason":"On-board radio: Wi-Fi 802.11b/g/n 2.4 GHz; Bluetooth 4.2.","basis":"engineering_inference"},{"other":{},"label":"Sensor fusion and on-device ML (TinyML)","reason":"On-board imu, microphone alongside the MCU — motion and audio data without extra wiring.","basis":"engineering_inference"},{"other":{},"label":"Wired networking and industrial control","reason":"Ethernet interface for deterministic, wired links.","basis":"engineering_inference"},{"other":{},"label":"Custom digital protocols and precise timing","reason":"Programmable I/O state machines bit-bang protocols (WS2812, DVI, extra UARTs) without CPU load.","basis":"engineering_inference"},{"other":{},"label":"Custom USB devices (HID, MIDI, serial)","reason":"USB is on the main chip (RP2040), so the board can enumerate as a keyboard, MIDI device or CDC serial port.","basis":"engineering_inference"},{"other":{},"label":"Learning and fast prototyping","reason":"Programs from Arduino IDE, MicroPython, Arduino Cloud.","basis":"engineering_inference"}],"children":[{"other":{},"ref_id":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--mcu","role":"main_processor","count":1,"notes":"Raspberry Pi RP2040"},{"other":{},"ref_id":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--m1","role":"wireless_module","count":1,"notes":"u-blox NINA-W102-00B"},{"other":{},"ref_id":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--u4","role":"crypto","count":1,"notes":"Microchip ATECC608A-MAHDA-T"},{"other":{},"ref_id":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--u5","role":"flash_memory","count":1,"notes":"Adesto/Renesas AT25SF128A-MHB-T"},{"other":{},"ref_id":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--u6","role":"buck_converter","count":1,"notes":"Monolithic Power Systems MP2322GQH"},{"other":{},"ref_id":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--u7","role":"oscillator","count":1,"notes":"Microchip DSC6111HI2B-012.0000"},{"other":{},"ref_id":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--u8","role":"microphone","count":1,"notes":"STMicroelectronics MP34DT06JTR"},{"other":{},"ref_id":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--u9","role":"imu","count":1,"notes":"STMicroelectronics LSM6DSOXTR"}],"spec":{"other":{},"usage":{"other":{},"pinout":[{"id":"JP1-1","kind":"gpio","label":"TX1","notes":"UART TX / Digital Pin 1","other":{},"position":"1","reserved":false,"connector":"JP1","functions":["TX1","GPIO0","PWM","Serial1 TX (UART0)","SPI0_RX","UART0_TX","I2C0_SDA","PWM0_A","SIO","PIO0","PIO1","USB_OVCUR_DET"],"voltage_v":3.3,"electrical":{"ioh":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"iol":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"p.7 table 7_1"},"vil":{"max":0.99,"min":0,"unit":"V","source":"p.7 table 7_1"},"voh":{"max":3.3,"min":2.7,"unit":"V","source":"p.7 table 7_1","conditions":"IOH = 8 mA"},"vol":{"max":0.4,"min":0,"unit":"V","source":"p.7 table 7_1","conditions":"IOL = 8 mA"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO0"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 GPIO0"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO0"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO0"},"io_voltage":{"unit":"V","value":3.3,"source":"p.10"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO0"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.20"},"five_volt_tolerant":{"value":false,"source":"p.20"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 GPIO0"}},"max_drive_ma":8,"boot_strapping":false,"five_volt_tolerant":false},{"id":"JP1-2","kind":"gpio","label":"RX0","notes":"UART RX / Digital Pin 0","other":{},"position":"2","reserved":false,"connector":"JP1","functions":["RX0","GPIO1","PWM","Serial1 RX (UART0)","SPI0_CSn","UART0_RX","I2C0_SCL","PWM0_B","SIO","PIO0","PIO1","USB_VBUS_DET"],"voltage_v":3.3,"electrical":{"ioh":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"iol":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"p.7 table 7_1"},"vil":{"max":0.99,"min":0,"unit":"V","source":"p.7 table 7_1"},"voh":{"max":3.3,"min":2.7,"unit":"V","source":"p.7 table 7_1","conditions":"IOH = 8 mA"},"vol":{"max":0.4,"min":0,"unit":"V","source":"p.7 table 7_1","conditions":"IOL = 8 mA"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO1"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 GPIO1"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO1"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO1"},"io_voltage":{"unit":"V","value":3.3,"source":"p.10"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO1"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.20"},"five_volt_tolerant":{"value":false,"source":"p.20"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 GPIO1"}},"max_drive_ma":8,"boot_strapping":false,"five_volt_tolerant":false},{"id":"JP1-3","kind":"control","label":"RST","notes":"Reset","other":{},"position":"3","reserved":false,"connector":"JP1","functions":["RST","RESET (RP2040 RUN; NINA GPIO19)"],"voltage_v":3.3,"electrical":{"ioh":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 RUN"},"iol":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 RUN"},"vih":{"max":3.6,"min":2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; max = IOVDD + 0.3; chip u1 RUN"},"vil":{"max":0.8,"min":-0.3,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; chip u1 RUN"},"voh":{"max":3.3,"min":2.62,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting; chip u1 RUN"},"vol":{"max":0.5,"min":0,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting; chip u1 RUN"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 RUN"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 RUN"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 RUN"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 RUN"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 RUN"},"abs_max_voltage":{"max":3.8,"min":-0.5,"unit":"V","source":"RP2040 datasheet p.615 table 615_3","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V); chip u1 RUN"},"five_volt_tolerant":{"value":false,"source":"RP2040 datasheet p.615 table 615_3","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V; chip u1 RUN"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 RUN"}},"max_drive_ma":12,"boot_strapping":false,"five_volt_tolerant":false},{"id":"JP1-4","kind":"ground","label":"GND","notes":"Ground","other":{},"position":"4","reserved":false,"connector":"JP1","functions":["ground"],"voltage_v":0,"electrical":{}},{"id":"JP1-5","kind":"gpio","label":"D2","notes":"Digital Pin 2","other":{},"position":"5","reserved":false,"connector":"JP1","functions":["D2","GPIO25","PWM","SPI1_CSn","UART1_RX","I2C0_SCL","PWM4_B","SIO","PIO0","PIO1","CLOCK_GPOUT3","USB_VBUS_DET"],"voltage_v":3.3,"electrical":{"ioh":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"iol":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"p.7 table 7_1"},"vil":{"max":0.99,"min":0,"unit":"V","source":"p.7 table 7_1"},"voh":{"max":3.3,"min":2.7,"unit":"V","source":"p.7 table 7_1","conditions":"IOH = 8 mA"},"vol":{"max":0.4,"min":0,"unit":"V","source":"p.7 table 7_1","conditions":"IOL = 8 mA"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO25"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 GPIO25"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO25"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO25"},"io_voltage":{"unit":"V","value":3.3,"source":"p.10"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO25"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.20"},"five_volt_tolerant":{"value":false,"source":"p.20"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 GPIO25"}},"max_drive_ma":8,"boot_strapping":false,"five_volt_tolerant":false},{"id":"JP1-6","kind":"gpio","label":"D3","notes":"Digital Pin 3","other":{},"position":"6","reserved":false,"connector":"JP1","functions":["D3","GPIO15","PWM","SPI1_TX","UART0_RTS","I2C1_SCL","PWM7_B","SIO","PIO0","PIO1","USB_OVCUR_DET"],"voltage_v":3.3,"electrical":{"ioh":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"iol":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"p.7 table 7_1"},"vil":{"max":0.99,"min":0,"unit":"V","source":"p.7 table 7_1"},"voh":{"max":3.3,"min":2.7,"unit":"V","source":"p.7 table 7_1","conditions":"IOH = 8 mA"},"vol":{"max":0.4,"min":0,"unit":"V","source":"p.7 table 7_1","conditions":"IOL = 8 mA"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO15"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 GPIO15"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO15"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO15"},"io_voltage":{"unit":"V","value":3.3,"source":"p.10"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO15"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.20"},"five_volt_tolerant":{"value":false,"source":"p.20"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 GPIO15"}},"max_drive_ma":8,"boot_strapping":false,"five_volt_tolerant":false},{"id":"JP1-7","kind":"gpio","label":"D4","notes":"Digital Pin 4","other":{},"position":"7","reserved":false,"connector":"JP1","functions":["D4","GPIO16","PWM","SPI0_RX","UART0_TX","I2C0_SDA","PWM0_A","SIO","PIO0","PIO1","USB_VBUS_DET"],"voltage_v":3.3,"electrical":{"ioh":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"iol":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"p.7 table 7_1"},"vil":{"max":0.99,"min":0,"unit":"V","source":"p.7 table 7_1"},"voh":{"max":3.3,"min":2.7,"unit":"V","source":"p.7 table 7_1","conditions":"IOH = 8 mA"},"vol":{"max":0.4,"min":0,"unit":"V","source":"p.7 table 7_1","conditions":"IOL = 8 mA"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO16"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 GPIO16"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO16"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO16"},"io_voltage":{"unit":"V","value":3.3,"source":"p.10"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO16"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.20"},"five_volt_tolerant":{"value":false,"source":"p.20"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 GPIO16"}},"max_drive_ma":8,"boot_strapping":false,"five_volt_tolerant":false},{"id":"JP1-8","kind":"gpio","label":"D5","notes":"Digital Pin 5","other":{},"position":"8","reserved":false,"connector":"JP1","functions":["D5","GPIO17","PWM","SPI0_CSn","UART0_RX","I2C0_SCL","PWM0_B","SIO","PIO0","PIO1","USB_VBUS_EN"],"voltage_v":3.3,"electrical":{"ioh":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"iol":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"p.7 table 7_1"},"vil":{"max":0.99,"min":0,"unit":"V","source":"p.7 table 7_1"},"voh":{"max":3.3,"min":2.7,"unit":"V","source":"p.7 table 7_1","conditions":"IOH = 8 mA"},"vol":{"max":0.4,"min":0,"unit":"V","source":"p.7 table 7_1","conditions":"IOL = 8 mA"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO17"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 GPIO17"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO17"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO17"},"io_voltage":{"unit":"V","value":3.3,"source":"p.10"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO17"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.20"},"five_volt_tolerant":{"value":false,"source":"p.20"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 GPIO17"}},"max_drive_ma":8,"boot_strapping":false,"five_volt_tolerant":false},{"id":"JP1-9","kind":"gpio","label":"D6","notes":"Digital Pin 6","other":{},"position":"9","reserved":false,"connector":"JP1","functions":["D6","GPIO18","PWM","SPI0_SCK","UART0_CTS","I2C1_SDA","PWM1_A","SIO","PIO0","PIO1","USB_OVCUR_DET"],"voltage_v":3.3,"electrical":{"ioh":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"iol":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"p.7 table 7_1"},"vil":{"max":0.99,"min":0,"unit":"V","source":"p.7 table 7_1"},"voh":{"max":3.3,"min":2.7,"unit":"V","source":"p.7 table 7_1","conditions":"IOH = 8 mA"},"vol":{"max":0.4,"min":0,"unit":"V","source":"p.7 table 7_1","conditions":"IOL = 8 mA"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO18"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 GPIO18"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO18"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO18"},"io_voltage":{"unit":"V","value":3.3,"source":"p.10"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO18"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.20"},"five_volt_tolerant":{"value":false,"source":"p.20"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 GPIO18"}},"max_drive_ma":8,"boot_strapping":false,"five_volt_tolerant":false},{"id":"JP1-10","kind":"gpio","label":"D7","notes":"Digital Pin 7","other":{},"position":"10","reserved":false,"connector":"JP1","functions":["D7","GPIO19","PWM","SPI0_TX","UART0_RTS","I2C1_SCL","PWM1_B","SIO","PIO0","PIO1","USB_VBUS_DET"],"voltage_v":3.3,"electrical":{"ioh":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"iol":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"p.7 table 7_1"},"vil":{"max":0.99,"min":0,"unit":"V","source":"p.7 table 7_1"},"voh":{"max":3.3,"min":2.7,"unit":"V","source":"p.7 table 7_1","conditions":"IOH = 8 mA"},"vol":{"max":0.4,"min":0,"unit":"V","source":"p.7 table 7_1","conditions":"IOL = 8 mA"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO19"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 GPIO19"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO19"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO19"},"io_voltage":{"unit":"V","value":3.3,"source":"p.10"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO19"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.20"},"five_volt_tolerant":{"value":false,"source":"p.20"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 GPIO19"}},"max_drive_ma":8,"boot_strapping":false,"five_volt_tolerant":false},{"id":"JP1-11","kind":"gpio","label":"D8","notes":"Digital Pin 8","other":{},"position":"11","reserved":false,"connector":"JP1","functions":["D8","GPIO20","PWM","SPI0_RX","UART1_TX","I2C0_SDA","PWM2_A","SIO","PIO0","PIO1","CLOCK_GPIN0","USB_VBUS_EN"],"voltage_v":3.3,"electrical":{"ioh":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"iol":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"p.7 table 7_1"},"vil":{"max":0.99,"min":0,"unit":"V","source":"p.7 table 7_1"},"voh":{"max":3.3,"min":2.7,"unit":"V","source":"p.7 table 7_1","conditions":"IOH = 8 mA"},"vol":{"max":0.4,"min":0,"unit":"V","source":"p.7 table 7_1","conditions":"IOL = 8 mA"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO20"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 GPIO20"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO20"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO20"},"io_voltage":{"unit":"V","value":3.3,"source":"p.10"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO20"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.20"},"five_volt_tolerant":{"value":false,"source":"p.20"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 GPIO20"}},"max_drive_ma":8,"boot_strapping":false,"five_volt_tolerant":false},{"id":"JP1-12","kind":"gpio","label":"D9","notes":"Digital Pin 9","other":{},"position":"12","reserved":false,"connector":"JP1","functions":["D9","GPIO21","PWM","SPI0_CSn","UART1_RX","I2C0_SCL","PWM2_B","SIO","PIO0","PIO1","CLOCK_GPOUT0","USB_OVCUR_DET"],"voltage_v":3.3,"electrical":{"ioh":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"iol":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"p.7 table 7_1"},"vil":{"max":0.99,"min":0,"unit":"V","source":"p.7 table 7_1"},"voh":{"max":3.3,"min":2.7,"unit":"V","source":"p.7 table 7_1","conditions":"IOH = 8 mA"},"vol":{"max":0.4,"min":0,"unit":"V","source":"p.7 table 7_1","conditions":"IOL = 8 mA"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO21"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 GPIO21"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO21"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO21"},"io_voltage":{"unit":"V","value":3.3,"source":"p.10"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO21"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.20"},"five_volt_tolerant":{"value":false,"source":"p.20"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 GPIO21"}},"max_drive_ma":8,"boot_strapping":false,"five_volt_tolerant":false},{"id":"JP1-13","kind":"gpio","label":"D10","notes":"Digital Pin 10","other":{},"position":"13","reserved":false,"connector":"JP1","functions":["D10","GPIO5","PWM","SPI0_CSn","UART1_RX","I2C0_SCL","PWM2_B","SIO","PIO0","PIO1","USB_VBUS_EN"],"voltage_v":3.3,"electrical":{"ioh":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"iol":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"p.7 table 7_1"},"vil":{"max":0.99,"min":0,"unit":"V","source":"p.7 table 7_1"},"voh":{"max":3.3,"min":2.7,"unit":"V","source":"p.7 table 7_1","conditions":"IOH = 8 mA"},"vol":{"max":0.4,"min":0,"unit":"V","source":"p.7 table 7_1","conditions":"IOL = 8 mA"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO5"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 GPIO5"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO5"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO5"},"io_voltage":{"unit":"V","value":3.3,"source":"p.10"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO5"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.20"},"five_volt_tolerant":{"value":false,"source":"p.20"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 GPIO5"}},"max_drive_ma":8,"boot_strapping":false,"five_volt_tolerant":false},{"id":"JP1-14","kind":"gpio","label":"D11","notes":"Digital Pin 11","other":{},"position":"14","reserved":false,"connector":"JP1","functions":["D11","GPIO7","PWM","SPI COPI","SPI0_TX","UART1_RTS","I2C1_SCL","PWM3_B","SIO","PIO0","PIO1","USB_VBUS_DET"],"voltage_v":3.3,"electrical":{"ioh":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"iol":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"p.7 table 7_1"},"vil":{"max":0.99,"min":0,"unit":"V","source":"p.7 table 7_1"},"voh":{"max":3.3,"min":2.7,"unit":"V","source":"p.7 table 7_1","conditions":"IOH = 8 mA"},"vol":{"max":0.4,"min":0,"unit":"V","source":"p.7 table 7_1","conditions":"IOL = 8 mA"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO7"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 GPIO7"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO7"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO7"},"io_voltage":{"unit":"V","value":3.3,"source":"p.10"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO7"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.20"},"five_volt_tolerant":{"value":false,"source":"p.20"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 GPIO7"}},"max_drive_ma":8,"boot_strapping":false,"five_volt_tolerant":false},{"id":"JP1-15","kind":"gpio","label":"D12","notes":"Digital Pin 12","other":{},"position":"15","reserved":false,"connector":"JP1","functions":["D12","GPIO4","PWM","SPI CIPO","SPI0_RX","UART1_TX","I2C0_SDA","PWM2_A","SIO","PIO0","PIO1","USB_VBUS_DET"],"voltage_v":3.3,"electrical":{"ioh":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"iol":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"p.7 table 7_1"},"vil":{"max":0.99,"min":0,"unit":"V","source":"p.7 table 7_1"},"voh":{"max":3.3,"min":2.7,"unit":"V","source":"p.7 table 7_1","conditions":"IOH = 8 mA"},"vol":{"max":0.4,"min":0,"unit":"V","source":"p.7 table 7_1","conditions":"IOL = 8 mA"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO4"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 GPIO4"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO4"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO4"},"io_voltage":{"unit":"V","value":3.3,"source":"p.10"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO4"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.20"},"five_volt_tolerant":{"value":false,"source":"p.20"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 GPIO4"}},"max_drive_ma":8,"boot_strapping":false,"five_volt_tolerant":false},{"id":"JP2-1","kind":"gpio","label":"D13","notes":"Digital Pin 13","other":{},"position":"1","reserved":false,"connector":"JP2","functions":["D13","GPIO6","PWM","SPI SCK","SPI0_SCK","UART1_CTS","I2C1_SDA","PWM3_A","SIO","PIO0","PIO1","USB_OVCUR_DET"],"voltage_v":3.3,"electrical":{"ioh":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"iol":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"p.7 table 7_1"},"vil":{"max":0.99,"min":0,"unit":"V","source":"p.7 table 7_1"},"voh":{"max":3.3,"min":2.7,"unit":"V","source":"p.7 table 7_1","conditions":"IOH = 8 mA"},"vol":{"max":0.4,"min":0,"unit":"V","source":"p.7 table 7_1","conditions":"IOL = 8 mA"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO6"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 GPIO6"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO6"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO6"},"io_voltage":{"unit":"V","value":3.3,"source":"p.10"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO6"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.20"},"five_volt_tolerant":{"value":false,"source":"p.20"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 GPIO6"}},"max_drive_ma":8,"boot_strapping":false,"five_volt_tolerant":false},{"id":"JP2-2","kind":"power_out","label":"3.3V","notes":"3.3V Power","other":{},"position":"2","reserved":false,"connector":"JP2","functions":["power_out"],"voltage_v":3.3,"electrical":{"output_current":{"max":800,"unit":"mA","source":"p.7 table 7_1"},"output_voltage":{"max":3.35,"min":3.25,"typ":3.3,"unit":"V","source":"p.7 table 7_1"}}},{"id":"JP2-3","kind":"analog","label":"REF","notes":"NC","other":{},"position":"3","reserved":false,"connector":"JP2","functions":["AREF (not connected; reference fixed at 3.3 V)"],"electrical":{}},{"id":"JP2-4","kind":"gpio","label":"A0","notes":"Analog Pin 0","other":{},"position":"4","reserved":false,"connector":"JP2","functions":["A0","GPIO26","PWM","SPI1_SCK","UART1_CTS","I2C1_SDA","PWM5_A","SIO","PIO0","PIO1","USB_VBUS_EN","ADC0"],"voltage_v":3.3,"electrical":{"ioh":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"iol":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"p.7 table 7_1"},"vil":{"max":0.99,"min":0,"unit":"V","source":"p.7 table 7_1"},"voh":{"max":3.3,"min":2.7,"unit":"V","source":"p.7 table 7_1","conditions":"IOH = 8 mA"},"vol":{"max":0.4,"min":0,"unit":"V","source":"p.7 table 7_1","conditions":"IOL = 8 mA"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO26"},"esd_hbm":{"max":2,"unit":"kV","source":"RP2040 datasheet p.615 table 615_4","conditions":"chip u1 GPIO26"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO26"},"adc_enob":{"min":8.7,"source":"RP2040 datasheet p.618 table 618_1","conditions":"chip u1 GPIO26"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO26"},"io_voltage":{"unit":"V","value":3.3,"source":"p.10"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO26"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.20"},"adc_input_range":{"max":3.3,"min":0,"unit":"V","source":"RP2040 datasheet p.618 table 618_1","conditions":"max = ADC_AVDD (3.3 V typ); chip u1 GPIO26"},"five_volt_tolerant":{"value":false,"source":"p.20"},"adc_input_impedance":{"min":100,"unit":"kΩ","source":"RP2040 datasheet p.618 table 618_1","conditions":"chip u1 GPIO26"}},"max_drive_ma":8,"boot_strapping":false,"five_volt_tolerant":false},{"id":"JP2-5","kind":"gpio","label":"A1","notes":"Analog Pin 1","other":{},"position":"5","reserved":false,"connector":"JP2","functions":["A1","GPIO27","PWM","SPI1_TX","UART1_RTS","I2C1_SCL","PWM5_B","SIO","PIO0","PIO1","USB_OVCUR_DET","ADC1"],"voltage_v":3.3,"electrical":{"ioh":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"iol":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"p.7 table 7_1"},"vil":{"max":0.99,"min":0,"unit":"V","source":"p.7 table 7_1"},"voh":{"max":3.3,"min":2.7,"unit":"V","source":"p.7 table 7_1","conditions":"IOH = 8 mA"},"vol":{"max":0.4,"min":0,"unit":"V","source":"p.7 table 7_1","conditions":"IOL = 8 mA"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO27"},"esd_hbm":{"max":2,"unit":"kV","source":"RP2040 datasheet p.615 table 615_4","conditions":"chip u1 GPIO27"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO27"},"adc_enob":{"min":8.7,"source":"RP2040 datasheet p.618 table 618_1","conditions":"chip u1 GPIO27"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO27"},"io_voltage":{"unit":"V","value":3.3,"source":"p.10"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO27"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.20"},"adc_input_range":{"max":3.3,"min":0,"unit":"V","source":"RP2040 datasheet p.618 table 618_1","conditions":"max = ADC_AVDD (3.3 V typ); chip u1 GPIO27"},"five_volt_tolerant":{"value":false,"source":"p.20"},"adc_input_impedance":{"min":100,"unit":"kΩ","source":"RP2040 datasheet p.618 table 618_1","conditions":"chip u1 GPIO27"}},"max_drive_ma":8,"boot_strapping":false,"five_volt_tolerant":false},{"id":"JP2-6","kind":"gpio","label":"A2","notes":"Analog Pin 2","other":{},"position":"6","reserved":false,"connector":"JP2","functions":["A2","GPIO28","PWM","SPI1_RX","UART0_TX","I2C0_SDA","PWM6_A","SIO","PIO0","PIO1","USB_VBUS_DET","ADC2"],"voltage_v":3.3,"electrical":{"ioh":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"iol":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"p.7 table 7_1"},"vil":{"max":0.99,"min":0,"unit":"V","source":"p.7 table 7_1"},"voh":{"max":3.3,"min":2.7,"unit":"V","source":"p.7 table 7_1","conditions":"IOH = 8 mA"},"vol":{"max":0.4,"min":0,"unit":"V","source":"p.7 table 7_1","conditions":"IOL = 8 mA"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO28"},"esd_hbm":{"max":2,"unit":"kV","source":"RP2040 datasheet p.615 table 615_4","conditions":"chip u1 GPIO28"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO28"},"adc_enob":{"min":8.7,"source":"RP2040 datasheet p.618 table 618_1","conditions":"chip u1 GPIO28"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO28"},"io_voltage":{"unit":"V","value":3.3,"source":"p.10"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO28"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.20"},"adc_input_range":{"max":3.3,"min":0,"unit":"V","source":"RP2040 datasheet p.618 table 618_1","conditions":"max = ADC_AVDD (3.3 V typ); chip u1 GPIO28"},"five_volt_tolerant":{"value":false,"source":"p.20"},"adc_input_impedance":{"min":100,"unit":"kΩ","source":"RP2040 datasheet p.618 table 618_1","conditions":"chip u1 GPIO28"}},"max_drive_ma":8,"boot_strapping":false,"five_volt_tolerant":false},{"id":"JP2-7","kind":"gpio","label":"A3","notes":"Analog Pin 3","other":{},"position":"7","reserved":false,"connector":"JP2","functions":["A3","GPIO29","PWM","SPI1_CSn","UART0_RX","I2C0_SCL","PWM6_B","SIO","PIO0","PIO1","USB_VBUS_EN","ADC3"],"voltage_v":3.3,"electrical":{"ioh":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"iol":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"p.7 table 7_1"},"vil":{"max":0.99,"min":0,"unit":"V","source":"p.7 table 7_1"},"voh":{"max":3.3,"min":2.7,"unit":"V","source":"p.7 table 7_1","conditions":"IOH = 8 mA"},"vol":{"max":0.4,"min":0,"unit":"V","source":"p.7 table 7_1","conditions":"IOL = 8 mA"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO29"},"esd_hbm":{"max":2,"unit":"kV","source":"RP2040 datasheet p.615 table 615_4","conditions":"chip u1 GPIO29"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO29"},"adc_enob":{"min":8.7,"source":"RP2040 datasheet p.618 table 618_1","conditions":"chip u1 GPIO29"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO29"},"io_voltage":{"unit":"V","value":3.3,"source":"p.10"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO29"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.20"},"adc_input_range":{"max":3.3,"min":0,"unit":"V","source":"RP2040 datasheet p.618 table 618_1","conditions":"max = ADC_AVDD (3.3 V typ); chip u1 GPIO29"},"five_volt_tolerant":{"value":false,"source":"p.20"},"adc_input_impedance":{"min":100,"unit":"kΩ","source":"RP2040 datasheet p.618 table 618_1","conditions":"chip u1 GPIO29"}},"max_drive_ma":8,"boot_strapping":false,"five_volt_tolerant":false},{"id":"JP2-8","kind":"gpio","label":"A4","notes":"Analog Pin 4","other":{},"position":"8","reserved":false,"connector":"JP2","functions":["A4","GPIO12","PWM","I2C SDA (4.7 kΩ pull-up; shared with onboard IMU/crypto)","NINA-W102 ADC2 / ESP32 GPIO34","SPI1_RX","UART0_TX","I2C0_SDA","PWM6_A","SIO","PIO0","PIO1","USB_OVCUR_DET"],"voltage_v":3.3,"electrical":{"ioh":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"iol":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"p.7 table 7_1"},"vil":{"max":0.99,"min":0,"unit":"V","source":"p.7 table 7_1"},"voh":{"max":3.3,"min":2.7,"unit":"V","source":"p.7 table 7_1","conditions":"IOH = 8 mA"},"vol":{"max":0.4,"min":0,"unit":"V","source":"p.7 table 7_1","conditions":"IOL = 8 mA"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO12"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 GPIO12"},"pull_up":{"value":"4.7 kΩ to 3.3 V","source":"p.15"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO12"},"io_voltage":{"unit":"V","value":3.3,"source":"p.10"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO12"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.20"},"five_volt_tolerant":{"value":false,"source":"p.20"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 GPIO12"}},"max_drive_ma":8,"boot_strapping":false,"five_volt_tolerant":false},{"id":"JP2-9","kind":"gpio","label":"A5","notes":"Analog Pin 5","other":{},"position":"9","reserved":false,"connector":"JP2","functions":["A5","GPIO13","PWM","I2C SCL (4.7 kΩ pull-up; shared with onboard IMU/crypto)","NINA-W102 ADC3 / ESP32 GPIO39","SPI1_CSn","UART0_RX","I2C0_SCL","PWM6_B","SIO","PIO0","PIO1","USB_VBUS_DET"],"voltage_v":3.3,"electrical":{"ioh":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"iol":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"p.7 table 7_1"},"vil":{"max":0.99,"min":0,"unit":"V","source":"p.7 table 7_1"},"voh":{"max":3.3,"min":2.7,"unit":"V","source":"p.7 table 7_1","conditions":"IOH = 8 mA"},"vol":{"max":0.4,"min":0,"unit":"V","source":"p.7 table 7_1","conditions":"IOL = 8 mA"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 GPIO13"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 GPIO13"},"pull_up":{"value":"4.7 kΩ to 3.3 V","source":"p.15"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 GPIO13"},"io_voltage":{"unit":"V","value":3.3,"source":"p.10"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 GPIO13"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.20"},"five_volt_tolerant":{"value":false,"source":"p.20"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 GPIO13"}},"max_drive_ma":8,"boot_strapping":false,"five_volt_tolerant":false},{"id":"JP2-10","kind":"gpio","label":"A6","notes":"Analog Pin 6 — routed to the NINA-W102 (ESP32), 3.3 V, input only","other":{},"position":"10","reserved":false,"connector":"JP2","functions":["A6","NINA-W102 ADC (ESP32 GPIO36, input-only)","GPIO36","ADC1_CH0","RTC_GPIO0"],"voltage_v":3.3,"electrical":{"ioh":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"iol":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"p.7 table 7_1"},"vil":{"max":0.99,"min":0,"unit":"V","source":"p.7 table 7_1"},"voh":{"max":3.3,"min":2.7,"unit":"V","source":"p.7 table 7_1","conditions":"IOH = 8 mA"},"vol":{"max":0.4,"min":0,"unit":"V","source":"p.7 table 7_1","conditions":"IOL = 8 mA"},"pull_up":{"value":"none (GPIO34–39 have no internal pull-up/pull-down)","source":"ESP32-D0WD-V3 datasheet p.17","conditions":"VDD=3.3V; 25 °C; chip m1 GPIO36"},"pull_down":{"value":"none (GPIO34–39 have no internal pull-up/pull-down)","source":"ESP32-D0WD-V3 datasheet p.17","conditions":"VDD=3.3V; 25 °C; chip m1 GPIO36"},"io_voltage":{"unit":"V","value":3.3,"source":"p.10"},"input_leakage":{"max":50,"unit":"nA","source":"ESP32-D0WD-V3 datasheet p.52 table 52_1","conditions":"VDD=3.3V; 25 °C; chip m1 GPIO36"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.20"},"input_capacitance":{"typ":2,"unit":"pF","source":"ESP32-D0WD-V3 datasheet p.52 table 52_1","conditions":"VDD=3.3V; 25 °C; chip m1 GPIO36"},"five_volt_tolerant":{"value":false,"source":"p.20"}},"max_drive_ma":8,"boot_strapping":false,"five_volt_tolerant":false},{"id":"JP2-11","kind":"gpio","label":"A7","notes":"Analog Pin 7 — routed to the NINA-W102 (ESP32), 3.3 V, input only","other":{},"position":"11","reserved":false,"connector":"JP2","functions":["A7","NINA-W102 ADC (ESP32 GPIO35, input-only)","GPIO35","ADC1_CH7","RTC_GPIO5"],"voltage_v":3.3,"electrical":{"ioh":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"iol":{"max":8,"unit":"mA","source":"p.7 table 7_1"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"p.7 table 7_1"},"vil":{"max":0.99,"min":0,"unit":"V","source":"p.7 table 7_1"},"voh":{"max":3.3,"min":2.7,"unit":"V","source":"p.7 table 7_1","conditions":"IOH = 8 mA"},"vol":{"max":0.4,"min":0,"unit":"V","source":"p.7 table 7_1","conditions":"IOL = 8 mA"},"pull_up":{"value":"none (GPIO34–39 have no internal pull-up/pull-down)","source":"ESP32-D0WD-V3 datasheet p.17","conditions":"VDD=3.3V; 25 °C; chip m1 GPIO35"},"pull_down":{"value":"none (GPIO34–39 have no internal pull-up/pull-down)","source":"ESP32-D0WD-V3 datasheet p.17","conditions":"VDD=3.3V; 25 °C; chip m1 GPIO35"},"io_voltage":{"unit":"V","value":3.3,"source":"p.10"},"input_leakage":{"max":50,"unit":"nA","source":"ESP32-D0WD-V3 datasheet p.52 table 52_1","conditions":"VDD=3.3V; 25 °C; chip m1 GPIO35"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.20"},"input_capacitance":{"typ":2,"unit":"pF","source":"ESP32-D0WD-V3 datasheet p.52 table 52_1","conditions":"VDD=3.3V; 25 °C; chip m1 GPIO35"},"five_volt_tolerant":{"value":false,"source":"p.20"}},"max_drive_ma":8,"boot_strapping":false,"five_volt_tolerant":false},{"id":"JP2-12","kind":"power_out","label":"VUSB","notes":"USB Input Voltage","other":{},"position":"12","reserved":false,"connector":"JP2","functions":["power_out"],"electrical":{}},{"id":"JP2-13","kind":"control","label":"REC","notes":"BOOTSEL","other":{},"position":"13","reserved":false,"connector":"JP2","functions":["REC","BOOTSEL (QSPI_CSn; NINA GPIO21)"],"voltage_v":3.3,"electrical":{"ioh":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 QSPI_CSn"},"iol":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 QSPI_CSn"},"vih":{"max":3.6,"min":2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; max = IOVDD + 0.3; chip u1 QSPI_CSn"},"vil":{"max":0.8,"min":-0.3,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; chip u1 QSPI_CSn"},"voh":{"max":3.3,"min":2.62,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting; chip u1 QSPI_CSn"},"vol":{"max":0.5,"min":0,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting; chip u1 QSPI_CSn"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 QSPI_CSn"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 QSPI_CSn"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 QSPI_CSn"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 QSPI_CSn"},"abs_max_voltage":{"max":3.8,"min":-0.5,"unit":"V","source":"RP2040 datasheet p.615 table 615_3","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V); chip u1 QSPI_CSn"},"five_volt_tolerant":{"value":false,"source":"RP2040 datasheet p.615 table 615_3","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V; chip u1 QSPI_CSn"}},"max_drive_ma":12,"boot_strapping":false,"five_volt_tolerant":false},{"id":"JP2-14","kind":"ground","label":"GND","notes":"Ground","other":{},"position":"14","reserved":false,"connector":"JP2","functions":["ground"],"voltage_v":0,"electrical":{}},{"id":"JP2-15","kind":"power_in","label":"VIN","notes":"Voltage Input","other":{},"position":"15","reserved":false,"connector":"JP2","functions":["power_in"],"voltage_v":5,"electrical":{"input_voltage":{"max":20,"min":4,"typ":5,"unit":"V","source":"p.7 table 7_1"}}},{"id":"SWD_RP2040-1","kind":"debug","label":"SWDIO","notes":"SWD Data Line","other":{},"position":"1","reserved":false,"connector":"SWD_RP2040","functions":["SWDIO"],"voltage_v":3.3,"electrical":{"ioh":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 SWD"},"iol":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 SWD"},"vih":{"max":3.6,"min":2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; max = IOVDD + 0.3; chip u1 SWD"},"vil":{"max":0.8,"min":-0.3,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; chip u1 SWD"},"voh":{"max":3.3,"min":2.62,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting; chip u1 SWD"},"vol":{"max":0.5,"min":0,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting; chip u1 SWD"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 SWD"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 SWD"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 SWD"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 SWD"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 SWD"},"abs_max_voltage":{"max":3.8,"min":-0.5,"unit":"V","source":"RP2040 datasheet p.615 table 615_3","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V); chip u1 SWD"},"five_volt_tolerant":{"value":false,"source":"RP2040 datasheet p.615 table 615_3","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V; chip u1 SWD"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 SWD"}},"max_drive_ma":12,"boot_strapping":false,"five_volt_tolerant":false},{"id":"SWD_RP2040-2","kind":"ground","label":"GND","notes":"Ground","other":{},"position":"2","reserved":false,"connector":"SWD_RP2040","functions":["ground"],"voltage_v":0,"electrical":{}},{"id":"SWD_RP2040-3","kind":"debug","label":"SWCLK","notes":"SWD Clock","other":{},"position":"3","reserved":false,"connector":"SWD_RP2040","functions":["SWCLK"],"voltage_v":3.3,"electrical":{"ioh":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 SWCLK"},"iol":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 SWCLK"},"vih":{"max":3.6,"min":2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; max = IOVDD + 0.3; chip u1 SWCLK"},"vil":{"max":0.8,"min":-0.3,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; chip u1 SWCLK"},"voh":{"max":3.3,"min":2.62,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting; chip u1 SWCLK"},"vol":{"max":0.5,"min":0,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting; chip u1 SWCLK"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 SWCLK"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 SWCLK"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 SWCLK"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 SWCLK"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 SWCLK"},"abs_max_voltage":{"max":3.8,"min":-0.5,"unit":"V","source":"RP2040 datasheet p.615 table 615_3","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V); chip u1 SWCLK"},"five_volt_tolerant":{"value":false,"source":"RP2040 datasheet p.615 table 615_3","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V; chip u1 SWCLK"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 SWCLK"}},"max_drive_ma":12,"boot_strapping":false,"five_volt_tolerant":false},{"id":"SWD_RP2040-4","kind":"power_out","label":"+3V3","notes":"+3V3 Power Rail","other":{},"position":"4","reserved":false,"connector":"SWD_RP2040","functions":["power_out"],"voltage_v":3.3,"electrical":{"output_voltage":{"max":3.35,"min":3.25,"typ":3.3,"unit":"V","source":"p.7 table 7_1"}}},{"id":"SWD_RP2040-5","kind":"control","label":"TP_RESETN","notes":"Reset","other":{},"position":"5","reserved":false,"connector":"SWD_RP2040","functions":["TP_RESETN"],"voltage_v":3.3,"electrical":{"ioh":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 RUN"},"iol":{"max":12,"typ":4,"unit":"mA","source":"RP2040 datasheet p.617 table 617_1","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA; chip u1 RUN"},"vih":{"max":3.6,"min":2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; max = IOVDD + 0.3; chip u1 RUN"},"vil":{"max":0.8,"min":-0.3,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; chip u1 RUN"},"voh":{"max":3.3,"min":2.62,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting; chip u1 RUN"},"vol":{"max":0.5,"min":0,"unit":"V","source":"RP2040 datasheet p.617 table 617_1","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting; chip u1 RUN"},"vhys":{"min":0.2,"unit":"V","source":"RP2040 datasheet p.616 table 616_3","conditions":"IOVDD=3.3V; Schmitt Trigger enabled; chip u1 RUN"},"esd_hbm":{"max":4,"unit":"kV","source":"RP2040 datasheet p.616 table 616_1","conditions":"chip u1 RUN"},"pull_up":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 RUN"},"pull_down":{"max":80,"min":50,"unit":"kΩ","source":"RP2040 datasheet p.617 table 617_1","conditions":"chip u1 RUN"},"input_leakage":{"max":1,"unit":"μA","source":"RP2040 datasheet p.616 table 616_3","conditions":"chip u1 RUN"},"abs_max_voltage":{"max":3.8,"min":-0.5,"unit":"V","source":"RP2040 datasheet p.615 table 615_3","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V); chip u1 RUN"},"five_volt_tolerant":{"value":false,"source":"RP2040 datasheet p.615 table 615_3","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V; chip u1 RUN"},"unpowered_voltage_tolerant":{"value":true,"source":"RP2040 datasheet p.613 table 613_1","conditions":"chip u1 RUN"}},"max_drive_ma":12,"boot_strapping":false,"five_volt_tolerant":false},{"id":"SWD_NINA-1","kind":"debug","label":"TP_RST","notes":"Reset (NINA-W102 programming pad)","other":{},"position":"1","reserved":false,"connector":"SWD_NINA","functions":["TP_RST"],"electrical":{}},{"id":"SWD_NINA-2","kind":"debug","label":"TP_RX","notes":"Serial Rx (NINA-W102 programming pad)","other":{},"position":"2","reserved":false,"connector":"SWD_NINA","functions":["TP_RX"],"electrical":{}},{"id":"SWD_NINA-3","kind":"debug","label":"TP_TX","notes":"Serial Tx (NINA-W102 programming pad)","other":{},"position":"3","reserved":false,"connector":"SWD_NINA","functions":["TP_TX"],"electrical":{}},{"id":"SWD_NINA-4","kind":"debug","label":"TP_GPIO0","notes":"GPIO0 (NINA-W102 programming pad)","other":{},"position":"4","reserved":false,"connector":"SWD_NINA","functions":["TP_GPIO0","GPIO0","ADC2_CH1","RTC_GPIO11","TOUCH1","EMAC_TX_CLK","CLK_OUT1","GPIO matrix (UART/I2C/I2S/SPI/LEDC PWM/MCPWM/RMT/PCNT/TWAI routable)"],"electrical":{"ioh":{"typ":40,"unit":"mA","source":"ESP32-D0WD-V3 datasheet p.52 table 52_1","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, max drive strength; chip m1 GPIO0"},"iol":{"typ":28,"unit":"mA","source":"ESP32-D0WD-V3 datasheet p.52 table 52_1","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, max drive strength; chip m1 GPIO0"},"vih":{"max":3.6,"min":2.475,"unit":"V","source":"ESP32-D0WD-V3 datasheet p.52 table 52_1","conditions":"VDD=3.3V; 25 °C; chip m1 GPIO0"},"vil":{"max":0.825,"min":-0.3,"unit":"V","source":"ESP32-D0WD-V3 datasheet p.52 table 52_1","conditions":"VDD=3.3V; 25 °C; chip m1 GPIO0"},"voh":{"min":2.64,"unit":"V","source":"ESP32-D0WD-V3 datasheet p.52 table 52_1","conditions":"VDD=3.3V; 25 °C; chip m1 GPIO0"},"vol":{"max":0.33,"unit":"V","source":"ESP32-D0WD-V3 datasheet p.52 table 52_1","conditions":"VDD=3.3V; 25 °C; chip m1 GPIO0"},"pull_up":{"typ":45,"unit":"kΩ","source":"ESP32-D0WD-V3 datasheet p.52 table 52_1","conditions":"VDD=3.3V; 25 °C; chip m1 GPIO0"},"pull_down":{"typ":45,"unit":"kΩ","source":"ESP32-D0WD-V3 datasheet p.52 table 52_1","conditions":"VDD=3.3V; 25 °C; chip m1 GPIO0"},"input_leakage":{"max":50,"unit":"nA","source":"ESP32-D0WD-V3 datasheet p.52 table 52_1","conditions":"VDD=3.3V; 25 °C; chip m1 GPIO0"},"boot_strapping":{"value":true,"source":"ESP32-D0WD-V3 datasheet p.22 table 22_1","conditions":"default Pull-up, bit 1; chip m1 GPIO0"},"abs_max_voltage":{"max":3.6,"min":-0.3,"unit":"V","source":"ESP32-D0WD-V3 datasheet p.52 table 52_1","conditions":"VDD=3.3V; 25 °C; chip m1 GPIO0"},"input_capacitance":{"typ":2,"unit":"pF","source":"ESP32-D0WD-V3 datasheet p.52 table 52_1","conditions":"VDD=3.3V; 25 °C; chip m1 GPIO0"},"five_volt_tolerant":{"value":false,"source":"ESP32-D0WD-V3 datasheet p.52 table 52_1","conditions":"VDD=3.3V; 25 °C; VIH max = VDD + 0.3 V; chip m1 GPIO0"}},"max_drive_ma":28,"boot_strapping":true,"five_volt_tolerant":false}],"derived":{},"connectors":[{"id":"J1","kind":"micro-USB","other":{}},{"id":"JP1","kind":"1x15 0.1in header / castellated (digital)","other":{},"pitch_mm":2.54,"pin_count":15},{"id":"JP2","kind":"1x15 0.1in header / castellated (analog + D13)","other":{},"pitch_mm":2.54,"pin_count":15},{"id":"SWD_RP2040","kind":"RP2040 SWD test pads","other":{},"pin_count":5},{"id":"SWD_NINA","kind":"NINA-W102 programming pads","other":{},"pin_count":4}],"pin_mappings":[{"other":{},"signal":"GPIO36","child_ref":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--m1","route_type":"direct","board_pin_id":"JP2-10","child_pin_id":"GPIO36"},{"other":{},"signal":"GPIO35","child_ref":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--m1","route_type":"direct","board_pin_id":"JP2-11","child_pin_id":"GPIO35"},{"other":{},"signal":"GPIO0","child_ref":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--m1","route_type":"direct","board_pin_id":"SWD_NINA-4","child_pin_id":"GPIO0"},{"other":{},"signal":"GPIO0","child_ref":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--mcu","route_type":"direct","board_pin_id":"JP1-1","child_pin_id":"GPIO0"},{"other":{},"signal":"GPIO1","child_ref":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--mcu","route_type":"direct","board_pin_id":"JP1-2","child_pin_id":"GPIO1"},{"other":{},"signal":"RUN","child_ref":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--mcu","route_type":"direct","board_pin_id":"JP1-3","child_pin_id":"RUN"},{"other":{},"signal":"GPIO25","child_ref":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--mcu","route_type":"direct","board_pin_id":"JP1-5","child_pin_id":"GPIO25"},{"other":{},"signal":"GPIO15","child_ref":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--mcu","route_type":"direct","board_pin_id":"JP1-6","child_pin_id":"GPIO15"},{"other":{},"signal":"GPIO16","child_ref":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--mcu","route_type":"direct","board_pin_id":"JP1-7","child_pin_id":"GPIO16"},{"other":{},"signal":"GPIO17","child_ref":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--mcu","route_type":"direct","board_pin_id":"JP1-8","child_pin_id":"GPIO17"},{"other":{},"signal":"GPIO18","child_ref":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--mcu","route_type":"direct","board_pin_id":"JP1-9","child_pin_id":"GPIO18"},{"other":{},"signal":"GPIO19","child_ref":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--mcu","route_type":"direct","board_pin_id":"JP1-10","child_pin_id":"GPIO19"},{"other":{},"signal":"GPIO20","child_ref":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--mcu","route_type":"direct","board_pin_id":"JP1-11","child_pin_id":"GPIO20"},{"other":{},"signal":"GPIO21","child_ref":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--mcu","route_type":"direct","board_pin_id":"JP1-12","child_pin_id":"GPIO21"},{"other":{},"signal":"GPIO5","child_ref":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--mcu","route_type":"direct","board_pin_id":"JP1-13","child_pin_id":"GPIO5"},{"other":{},"signal":"GPIO7","child_ref":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--mcu","route_type":"direct","board_pin_id":"JP1-14","child_pin_id":"GPIO7"},{"other":{},"signal":"GPIO4","child_ref":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--mcu","route_type":"direct","board_pin_id":"JP1-15","child_pin_id":"GPIO4"},{"other":{},"signal":"GPIO6","child_ref":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--mcu","route_type":"direct","board_pin_id":"JP2-1","child_pin_id":"GPIO6"},{"other":{},"signal":"GPIO26","child_ref":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--mcu","route_type":"direct","board_pin_id":"JP2-4","child_pin_id":"GPIO26"},{"other":{},"signal":"GPIO27","child_ref":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--mcu","route_type":"direct","board_pin_id":"JP2-5","child_pin_id":"GPIO27"},{"other":{},"signal":"GPIO28","child_ref":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--mcu","route_type":"direct","board_pin_id":"JP2-6","child_pin_id":"GPIO28"},{"other":{},"signal":"GPIO29","child_ref":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--mcu","route_type":"direct","board_pin_id":"JP2-7","child_pin_id":"GPIO29"},{"other":{},"signal":"GPIO12","child_ref":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--mcu","route_type":"direct","board_pin_id":"JP2-8","child_pin_id":"GPIO12"},{"other":{},"signal":"GPIO13","child_ref":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--mcu","route_type":"direct","board_pin_id":"JP2-9","child_pin_id":"GPIO13"},{"other":{},"signal":"QSPI_CSn","child_ref":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--mcu","route_type":"direct","board_pin_id":"JP2-13","child_pin_id":"QSPI_CSn"},{"other":{},"signal":"SWD","child_ref":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--mcu","route_type":"direct","board_pin_id":"SWD_RP2040-1","child_pin_id":"SWD"},{"other":{},"signal":"SWCLK","child_ref":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--mcu","route_type":"direct","board_pin_id":"SWD_RP2040-3","child_pin_id":"SWCLK"},{"other":{},"signal":"RUN","child_ref":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--mcu","route_type":"direct","board_pin_id":"SWD_RP2040-5","child_pin_id":"RUN"}],"requirements":{"other":{},"data_inputs":[],"power_inputs":[{"name":"VIN","notes":"Voltage Input","other":{},"voltage_max_v":20,"voltage_min_v":4}]},"pinout_complete":true},"geometry":{"cad":{"bbox":{"width_mm":17.77,"height_mm":4.5,"length_mm":44.48},"features":[],"mesh_path":"arduino-nano-rp2040-connect.stl","step_path":"arduino-nano-rp2040-connect.step","assumptions":["thickness=1.6 mm assumed: PCB thickness not printed","feature micro-USB receptacle: position read from the drawing; body size/height typical micro-USB"],"verification":"generated","envelope_complete":false},"other":{},"derived":{},"dimensions":{"other":{},"width_mm":17.77,"length_mm":43.18},"feature_boxes":[{"name":"micro-USB receptacle","x_mm":-1.3,"y_mm":4.4,"other":{},"width_mm":8,"height_mm":2.9,"length_mm":7.3}],"mounting_holes":[{"x_mm":1.26,"y_mm":1.26,"other":{},"diameter_mm":1.65},{"x_mm":41.9,"y_mm":1.26,"other":{},"diameter_mm":1.65},{"x_mm":1.26,"y_mm":16.51,"other":{},"diameter_mm":1.65},{"x_mm":41.9,"y_mm":16.51,"other":{},"diameter_mm":1.65}]},"provides":{"other":{},"memory":{"other":{},"sram_kb":264,"flash_kb":16384},"derived":{},"features":["6-axis IMU (LSM6DSOX): ±2–16 g accel, ±125–2000 dps gyro, machine-learning core, tilt/free-fall/step detection","PDM MEMS microphone (MP34DT06J), 64 dB SNR","ATECC608A secure element (SHA-256, AES-128, RNG, secure boot)","RGB LED on the NINA module (common anode)","16 MB QSPI flash, XIP","Onboard IMU and crypto share the A4/A5 I2C bus (4.7 kΩ pull-ups)"],"wireless":["Wi-Fi 802.11b/g/n 2.4 GHz","Bluetooth 4.2"],"gpio_count":22,"capabilities":[{"other":{},"protocol":"gpio","available":true,"board_pin_ids":["JP1-1","JP1-2","JP1-5","JP1-6","JP1-7","JP1-8","JP1-9","JP1-10","JP1-11","JP1-12","JP1-13","JP1-14","JP1-15","JP2-1","JP2-4","JP2-5","JP2-6","JP2-7","JP2-8","JP2-9","JP2-10","JP2-11","SWD_NINA-4"]},{"other":{},"protocol":"pwm","available":true,"board_pin_ids":["JP1-1","JP1-2","JP1-5","JP1-6","JP1-7","JP1-8","JP1-9","JP1-10","JP1-11","JP1-12","JP1-13","JP1-14","JP1-15","JP2-1","JP2-4","JP2-5","JP2-6","JP2-7","JP2-8","JP2-9"],"instance_count":8},{"other":{},"protocol":"uart","available":true,"board_pin_ids":["JP1-1","JP1-2","JP1-5","JP1-6","JP1-7","JP1-8","JP1-9","JP1-10","JP1-11","JP1-12","JP1-13","JP1-14","JP1-15","JP2-1","JP2-4","JP2-5","JP2-6","JP2-7","JP2-8","JP2-9"],"instance_count":2},{"other":{},"protocol":"spi","available":true,"board_pin_ids":["JP1-1","JP1-2","JP1-5","JP1-6","JP1-7","JP1-8","JP1-9","JP1-10","JP1-11","JP1-12","JP1-13","JP1-14","JP1-15","JP2-1","JP2-4","JP2-5","JP2-6","JP2-7","JP2-8","JP2-9"],"instance_count":2},{"other":{},"protocol":"other","available":true,"board_pin_ids":["JP1-1","JP1-2","JP1-5","JP1-6","JP1-7","JP1-8","JP1-9","JP1-10","JP1-11","JP1-12","JP1-13","JP1-14","JP1-15","JP2-1","JP2-4","JP2-5","JP2-6","JP2-7","JP2-8","JP2-9"],"instance_count":1},{"other":{},"protocol":"pio","available":true,"board_pin_ids":["JP1-1","JP1-2","JP1-5","JP1-6","JP1-7","JP1-8","JP1-9","JP1-10","JP1-11","JP1-12","JP1-13","JP1-14","JP1-15","JP2-1","JP2-4","JP2-5","JP2-6","JP2-7","JP2-8","JP2-9"],"instance_count":2},{"other":{},"protocol":"usb","available":true,"board_pin_ids":["JP1-1","JP1-2","JP1-5","JP1-6","JP1-7","JP1-8","JP1-9","JP1-10","JP1-11","JP1-12","JP1-13","JP1-14","JP1-15","JP2-1","JP2-4","JP2-5","JP2-6","JP2-7","JP2-8","JP2-9"]},{"other":{},"protocol":"control","available":true,"board_pin_ids":["JP1-3","JP2-13"]},{"other":{},"protocol":"clock","available":true,"board_pin_ids":["JP1-5","JP1-11","JP1-12","SWD_NINA-4"],"instance_count":2},{"other":{},"protocol":"analog","available":true,"board_pin_ids":["JP2-3"]},{"notes":"count stated in datasheet (adc_channels)","other":{},"protocol":"adc","available":true,"board_pin_ids":["JP2-4","JP2-5","JP2-6","JP2-7","JP2-8","JP2-9","JP2-10","JP2-11","SWD_NINA-4"],"instance_count":8},{"other":{},"protocol":"i2c","available":true,"board_pin_ids":["JP2-8","JP2-9"]},{"other":{},"protocol":"rtc_gpio","available":true,"board_pin_ids":["JP2-10","JP2-11","SWD_NINA-4"]},{"other":{},"protocol":"debug","available":true,"board_pin_ids":["SWD_RP2040-1","SWD_RP2040-3","SWD_RP2040-5","SWD_NINA-1","SWD_NINA-2","SWD_NINA-3","SWD_NINA-4"]},{"other":{},"protocol":"touch","available":true,"board_pin_ids":["SWD_NINA-4"]},{"other":{},"protocol":"ethernet","available":true,"board_pin_ids":["SWD_NINA-4"]},{"other":{},"protocol":"gpio_matrix","available":true,"board_pin_ids":["SWD_NINA-4"]}],"software_frameworks":["Arduino IDE","MicroPython","Arduino Cloud"]},"compliance":{"other":{},"derived":{},"certifications":["CE (RED 2014/53/EU)","RoHS 2/3","FCC Part 15"]},"constraints":{"other":{},"derived":{},"thermal":{"other":{},"operating_temp_max_c":80,"operating_temp_min_c":-20},"electrical":{"other":{},"io_voltage_v":3.3,"logic_high_min_v":2,"pin_drive_max_ma":28,"supply_voltage_max_v":20,"supply_voltage_min_v":4,"supply_voltage_nominal_v":5}}},"other":null,"source_type":"pdf","source_ref":"https://docs.arduino.cc/resources/datasheets/ABX00053-datasheet.pdf","datasheet":{"cad":{"bbox":{"max":[43.18,17.77,4.5],"min":[-1.3,0,0],"width_mm":17.77,"height_mm":4.5,"length_mm":44.48},"check":{"failed":[],"passed":true},"expected":[{"what":"pcb","width":17.77,"length":43.18,"thickness":1.6},{"d":1.65,"x":1.26,"y":1.26,"axis":"z","name":"M1","what":"hole"},{"d":1.65,"x":41.9,"y":1.26,"axis":"z","name":"M2","what":"hole"},{"d":1.65,"x":1.26,"y":16.51,"axis":"z","name":"M3","what":"hole"},{"d":1.65,"x":41.9,"y":16.51,"axis":"z","name":"M4","what":"hole"}],"archetype":"pcb_board","mesh_path":"/Users/sumeet/Documents/Xirkit Parent/XirkitOnboard/work/arduino-nano-rp2040-connect/07_cad/part.stl","step_path":"/Users/sumeet/Documents/Xirkit Parent/XirkitOnboard/work/arduino-nano-rp2040-connect/07_cad/part.step","views_png":"/Users/sumeet/Documents/Xirkit Parent/XirkitOnboard/work/arduino-nano-rp2040-connect/07_cad/views.png","export_stl":"arduino-nano-rp2040-connect.stl","assumptions":["thickness=1.6 mm assumed: PCB thickness not printed","feature micro-USB receptacle: position read from the drawing; body size/height typical micro-USB"],"export_step":"arduino-nano-rp2040-connect.step","envelope_complete":false},"chips":[{"id":"u1","mpn":"RP2040","src":{"page":9,"quote":"| U1 | Raspberry Pi RP2040 Microcontroller | U2 | Ublox NINA-W102-00B Wi-Fi/Bluetooth® Module |","method":"table","table_id":"9_1"},"role":"main_processor","manufacturer":"Raspberry Pi"},{"id":"m1","mpn":"NINA-W102-00B","src":{"page":9,"quote":"| U1 | Raspberry Pi RP2040 Microcontroller | U2 | Ublox NINA-W102-00B Wi-Fi/Bluetooth® Module |","method":"table","table_id":"9_1"},"role":"wireless_module","notes":"ESP32-based module; drives A4–A7 ADC and the RGB LED","manufacturer":"u-blox"},{"id":"u4","mpn":"ATECC608A-MAHDA-T","src":{"page":9,"quote":"| U3 | N/A | U4 | ATECC608A-MAHDA-T Crypto IC |","method":"table","table_id":"9_1"},"role":"crypto","manufacturer":"Microchip"},{"id":"u5","mpn":"AT25SF128A-MHB-T","src":{"page":9,"quote":"| U5 | AT25SF128A-MHB-T 16MB Flash IC | U6 | MP2322GQH Step-Down Buck Regulator |","method":"table","table_id":"9_1"},"role":"flash_memory","manufacturer":"Adesto/Renesas"},{"id":"u6","mpn":"MP2322GQH","src":{"page":9,"quote":"| U5 | AT25SF128A-MHB-T 16MB Flash IC | U6 | MP2322GQH Step-Down Buck Regulator |","method":"table","table_id":"9_1"},"role":"buck_converter","manufacturer":"Monolithic Power Systems"},{"id":"u7","mpn":"DSC6111HI2B-012.0000","src":{"page":9,"quote":"| U7 | DSC6111HI2B-012.0000 MEMS Oscillator | U8 | MP34DT06JTR MEMS Omnidirectional Microphone IC |","method":"table","table_id":"9_1"},"role":"oscillator","manufacturer":"Microchip"},{"id":"u8","mpn":"MP34DT06JTR","src":{"page":9,"quote":"| U7 | DSC6111HI2B-012.0000 MEMS Oscillator | U8 | MP34DT06JTR MEMS Omnidirectional Microphone IC |","method":"table","table_id":"9_1"},"role":"microphone","manufacturer":"STMicroelectronics"},{"id":"u9","mpn":"LSM6DSOXTR","src":{"page":9,"quote":"| U9 | LSM6DSOXTR 6-axis IMU with Machine Learning Core | J1 | Male Micro USB Connector |","method":"table","table_id":"9_1"},"role":"imu","manufacturer":"STMicroelectronics"}],"fields":{"usb":{"src":{"page":2,"quote":"USB 1.1 controller and PHY, with host and device support","method":"text"},"unit":null,"value":"micro-USB, RP2040 USB 1.1 device/host"},"sram_kb":{"src":{"page":2,"quote":"264 kB on-chip SRAM","method":"text"},"orig":{"unit":"KB","value":264},"unit":"KiB","value":264},"flash_kb":{"src":{"page":2,"quote":"AT25SF128A 16 MB NOR Flash","method":"text"},"orig":{"unit":"MB","value":16},"unit":"KiB","value":16384},"mcu_core":{"src":{"page":2,"quote":"133 MHz 32bit Dual Core Arm® Cortex®-M0+","method":"text"},"unit":null,"value":"Dual Arm Cortex-M0+ (RP2040) + Xtensa LX6 (NINA-W102)"},"wireless":{"src":{"page":2,"quote":"IEEE 802.11b/g/n single-band 2.4 GHz Wi-Fi® operation","method":"text"},"unit":null,"value":["Wi-Fi 802.11b/g/n 2.4 GHz","Bluetooth 4.2"]},"clock_mhz":{"src":{"page":2,"quote":"133 MHz 32bit Dual Core Arm® Cortex®-M0+","method":"text"},"orig":{"unit":"MHz","value":133},"unit":"Hz","value":133000000},"gpio_count":{"src":{"page":3,"quote":"14x Digital Pin … 8x Analog Pin","method":"derived"},"unit":null,"value":22},"io_voltage":{"src":{"page":10,"quote":"board. The RP2040 runs at 3.3V and has an internal voltage regulator providing 1.1V.","method":"text"},"unit":"V","value":3.3},"adc_channels":{"src":{"page":3,"quote":"8x Analog Pin","method":"text"},"unit":null,"value":8},"input_voltage":{"src":{"page":7,"quote":"| VIN | Input voltage from VIN pad | 4 | 5 | 20 | V |","method":"table","table_id":"7_1"},"unit":null,"value":"4–20 V VIN; 5 V USB"},"regulator_output":{"src":{"page":7,"quote":"| I3V3 | 3.3V output current (including onboard IC) | - | - | 800 | mA |","method":"table","table_id":"7_1"},"unit":null,"value":"3.3 V buck (MP2322GQH), 800 mA incl. onboard ICs"},"pio_state_machines":{"src":{"page":2,"quote":"8 PIO state machines","method":"text"},"unit":null,"value":8},"adc_resolution_bits":{"src":{"page":2,"quote":"4 channel ADC with internal temperature sensor, 0.5 MSa/s, 12-bit conversion","method":"text"},"unit":null,"value":12},"software_frameworks":{"src":{"page":13,"quote":"4.1 Getting Started - IDE","method":"derived"},"unit":null,"value":["Arduino IDE","MicroPython","Arduino Cloud"]}},"groups":{"io":["JP1-1","JP1-2","JP1-5","JP1-6","JP1-7","JP1-8","JP1-9","JP1-10","JP1-11","JP1-12","JP1-13","JP1-14","JP1-15","JP2-1","JP2-4","JP2-5","JP2-6","JP2-7","JP2-8","JP2-9","JP2-10","JP2-11"],"all":["JP1-1","JP1-2","JP1-3","JP1-4","JP1-5","JP1-6","JP1-7","JP1-8","JP1-9","JP1-10","JP1-11","JP1-12","JP1-13","JP1-14","JP1-15","JP2-1","JP2-2","JP2-3","JP2-4","JP2-5","JP2-6","JP2-7","JP2-8","JP2-9","JP2-10","JP2-11","JP2-12","JP2-13","JP2-14","JP2-15","SWD_RP2040-1","SWD_RP2040-2","SWD_RP2040-3","SWD_RP2040-4","SWD_RP2040-5","SWD_NINA-1","SWD_NINA-2","SWD_NINA-3","SWD_NINA-4"]},"source":{"url":"https://docs.arduino.cc/resources/datasheets/ABX00053-datasheet.pdf","pages":25,"sha256":"585aa55085ab337a13b6d7f78b736ce5ac927b163a183251ad42556b13fa57e8","onboarded_at":"2026-09-25T10:46:07+00:00"},"coverage":{"pct":100,"score":"42/42","passed":true,"explained_nulls":["supply_current","thickness","component_heights","weight"]},"entities":[{"id":"JP1-1","attrs":{"kind":"gpio","label":"TX1","number":2,"chip_pin":"GPIO0","position":"1","connector":"JP1","designator":"JP1-1","description":"UART TX / Digital Pin 1","power_domain":"IOVDD"},"sources":[{"page":14,"quote":"| 1 | TX1 | Digital | UART TX / Digital Pin 1 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"}],"attr_src":{"kind":{"page":14,"quote":"| 1 | TX1 | Digital | UART TX / Digital Pin 1 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"label":{"page":14,"quote":"| 1 | TX1 | Digital | UART TX / Digital Pin 1 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"number":{"via":"chip u1 GPIO0","method":"chip_link"},"chip_pin":{"page":14,"quote":"| 1 | TX1 | Digital | UART TX / Digital Pin 1 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"position":{"page":14,"quote":"| 1 | TX1 | Digital | UART TX / Digital Pin 1 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"connector":{"page":14,"quote":"| 1 | TX1 | Digital | UART TX / Digital Pin 1 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"designator":{"page":14,"quote":"| 1 | TX1 | Digital | UART TX / Digital Pin 1 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"description":{"page":14,"quote":"| 1 | TX1 | Digital | UART TX / Digital Pin 1 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"power_domain":{"via":"chip u1 GPIO0","method":"chip_link"}},"chip_pin":{"pin":"GPIO0","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"TX GPIO0","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"TX1","category":"gpio"},{"src":{"page":22,"quote":"TX GPIO0","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"GPIO0","category":"gpio"},{"src":{"page":22,"quote":"TX GPIO0","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"PWM","category":"pwm"},{"src":{"page":22,"quote":"TX GPIO0","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"Serial1 TX (UART0)","category":"uart"},{"alt":"F1","src":{"page":13,"quote":"| 0 | SPI0 RX | UART0 TX | I2C0 SDA | PWM0 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO0","signal":"SPI0_RX","category":"spi","instance":"0","peripheral":"SPI"},{"alt":"F2","src":{"page":13,"quote":"| 0 | SPI0 RX | UART0 TX | I2C0 SDA | PWM0 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO0","signal":"UART0_TX","category":"uart","instance":"0","peripheral":"UART"},{"alt":"F3","src":{"page":13,"quote":"| 0 | SPI0 RX | UART0 TX | I2C0 SDA | PWM0 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO0","signal":"I2C0_SDA","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":13,"quote":"| 0 | SPI0 RX | UART0 TX | I2C0 SDA | PWM0 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO0","signal":"PWM0_A","category":"pwm","instance":"0","peripheral":"PWM"},{"alt":"F5","src":{"page":13,"quote":"| 0 | SPI0 RX | UART0 TX | I2C0 SDA | PWM0 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO0","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":13,"quote":"| 0 | SPI0 RX | UART0 TX | I2C0 SDA | PWM0 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO0","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":13,"quote":"| 0 | SPI0 RX | UART0 TX | I2C0 SDA | PWM0 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO0","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":13,"quote":"| 0 | SPI0 RX | UART0 TX | I2C0 SDA | PWM0 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO0","signal":"USB_OVCUR_DET","category":"usb","instance":null,"peripheral":"USB"}],"electrical":{"ioh":[{"max":0.008,"src":{"page":7,"quote":"| IOH Max | Current at VDD-0.4 V, output set high |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VDD-0.4 V, output high (board)"}],"iol":[{"max":0.008,"src":{"page":7,"quote":"| IOL Max | Current at VSS+0.4 V, output set low |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VSS+0.4 V, output low (board)"}],"vih":[{"max":3.3,"min":2.31,"src":{"page":7,"quote":"| VIH | Input high-level voltage | 2.31 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input high-level voltage (board)"}],"vil":[{"max":0.99,"min":0,"src":{"page":7,"quote":"| VIL | Input low-level voltage | 0 | - | 0.99 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input low-level voltage (board)"}],"voh":[{"max":3.3,"min":2.7,"src":{"page":7,"quote":"| VOH | Output high voltage, 8 mA | 2.7 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output high voltage @ 8 mA (board)","conditions":"IOH = 8 mA"}],"vol":[{"max":0.4,"min":0,"src":{"page":7,"quote":"| VOL | Output low voltage, 8 mA | 0 | - | 0.4 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output low voltage @ 8 mA (board)","conditions":"IOL = 8 mA"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO0","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 GPIO0","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO0","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO0","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":10,"quote":"board. The RP2040 runs at 3.3V and has an internal voltage regulator providing 1.1V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO0","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.3,"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Maximum GPIO input voltage"}],"five_volt_tolerant":[{"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 GPIO0","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"JP1-2","attrs":{"kind":"gpio","label":"RX0","number":3,"chip_pin":"GPIO1","position":"2","connector":"JP1","designator":"JP1-2","description":"UART RX / Digital Pin 0","power_domain":"IOVDD"},"sources":[{"page":14,"quote":"| 2 | RX0 | Digital | UART RX / Digital Pin 0 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"}],"attr_src":{"kind":{"page":14,"quote":"| 2 | RX0 | Digital | UART RX / Digital Pin 0 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"label":{"page":14,"quote":"| 2 | RX0 | Digital | UART RX / Digital Pin 0 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"number":{"via":"chip u1 GPIO1","method":"chip_link"},"chip_pin":{"page":14,"quote":"| 2 | RX0 | Digital | UART RX / Digital Pin 0 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"position":{"page":14,"quote":"| 2 | RX0 | Digital | UART RX / Digital Pin 0 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"connector":{"page":14,"quote":"| 2 | RX0 | Digital | UART RX / Digital Pin 0 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"designator":{"page":14,"quote":"| 2 | RX0 | Digital | UART RX / Digital Pin 0 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"description":{"page":14,"quote":"| 2 | RX0 | Digital | UART RX / Digital Pin 0 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"power_domain":{"via":"chip u1 GPIO1","method":"chip_link"}},"chip_pin":{"pin":"GPIO1","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"RX GPIO01","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"RX0","category":"gpio"},{"src":{"page":22,"quote":"RX GPIO01","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"GPIO1","category":"gpio"},{"src":{"page":22,"quote":"RX GPIO01","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"PWM","category":"pwm"},{"src":{"page":22,"quote":"RX GPIO01","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"Serial1 RX (UART0)","category":"uart"},{"alt":"F1","src":{"page":13,"quote":"| 1 | SPI0 CSn | UART0 RX | I2C0 SCL | PWM0 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO1","signal":"SPI0_CSn","category":"spi","instance":"0","peripheral":"SPI"},{"alt":"F2","src":{"page":13,"quote":"| 1 | SPI0 CSn | UART0 RX | I2C0 SCL | PWM0 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO1","signal":"UART0_RX","category":"uart","instance":"0","peripheral":"UART"},{"alt":"F3","src":{"page":13,"quote":"| 1 | SPI0 CSn | UART0 RX | I2C0 SCL | PWM0 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO1","signal":"I2C0_SCL","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":13,"quote":"| 1 | SPI0 CSn | UART0 RX | I2C0 SCL | PWM0 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO1","signal":"PWM0_B","category":"pwm","instance":"0","peripheral":"PWM"},{"alt":"F5","src":{"page":13,"quote":"| 1 | SPI0 CSn | UART0 RX | I2C0 SCL | PWM0 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO1","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":13,"quote":"| 1 | SPI0 CSn | UART0 RX | I2C0 SCL | PWM0 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO1","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":13,"quote":"| 1 | SPI0 CSn | UART0 RX | I2C0 SCL | PWM0 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO1","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":13,"quote":"| 1 | SPI0 CSn | UART0 RX | I2C0 SCL | PWM0 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO1","signal":"USB_VBUS_DET","category":"usb","instance":null,"peripheral":"USB"}],"electrical":{"ioh":[{"max":0.008,"src":{"page":7,"quote":"| IOH Max | Current at VDD-0.4 V, output set high |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VDD-0.4 V, output high (board)"}],"iol":[{"max":0.008,"src":{"page":7,"quote":"| IOL Max | Current at VSS+0.4 V, output set low |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VSS+0.4 V, output low (board)"}],"vih":[{"max":3.3,"min":2.31,"src":{"page":7,"quote":"| VIH | Input high-level voltage | 2.31 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input high-level voltage (board)"}],"vil":[{"max":0.99,"min":0,"src":{"page":7,"quote":"| VIL | Input low-level voltage | 0 | - | 0.99 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input low-level voltage (board)"}],"voh":[{"max":3.3,"min":2.7,"src":{"page":7,"quote":"| VOH | Output high voltage, 8 mA | 2.7 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output high voltage @ 8 mA (board)","conditions":"IOH = 8 mA"}],"vol":[{"max":0.4,"min":0,"src":{"page":7,"quote":"| VOL | Output low voltage, 8 mA | 0 | - | 0.4 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output low voltage @ 8 mA (board)","conditions":"IOL = 8 mA"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO1","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 GPIO1","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO1","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO1","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":10,"quote":"board. The RP2040 runs at 3.3V and has an internal voltage regulator providing 1.1V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO1","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.3,"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Maximum GPIO input voltage"}],"five_volt_tolerant":[{"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 GPIO1","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"JP1-3","attrs":{"kind":"control","label":"RST","number":26,"chip_pin":"RUN","position":"3","connector":"JP1","designator":"JP1-3","description":"Reset","power_domain":"IOVDD"},"sources":[{"page":14,"quote":"| 3 | RST | Digital | Reset |","method":"table","fragment":"entities_headers.json","table_id":"14_2"}],"attr_src":{"kind":{"page":14,"quote":"| 3 | RST | Digital | Reset |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"label":{"page":14,"quote":"| 3 | RST | Digital | Reset |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"number":{"via":"chip u1 RUN","method":"chip_link"},"chip_pin":{"page":14,"quote":"| 3 | RST | Digital | Reset |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"position":{"page":14,"quote":"| 3 | RST | Digital | Reset |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"connector":{"page":14,"quote":"| 3 | RST | Digital | Reset |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"designator":{"page":14,"quote":"| 3 | RST | Digital | Reset |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"description":{"page":14,"quote":"| 3 | RST | Digital | Reset |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"power_domain":{"via":"chip u1 RUN","method":"chip_link"}},"chip_pin":{"pin":"RUN","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"RESET RESET","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"RST","category":"control"},{"src":{"page":22,"quote":"RESET RESET","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"RESET (RP2040 RUN; NINA GPIO19)","category":"control"}],"electrical":{"ioh":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOH = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 RUN","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"Output source current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"iol":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOL = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 RUN","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Output sink current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"vih":[{"max":3.6,"min":2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage High @ IOVDD=3.3V | VIH | 2 | IOVDD + 0.3 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 RUN","unit":"V","symbol":"VIH","category":"characteristic","parameter":"Input Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD + 0.3"}],"vil":[{"max":0.8,"min":-0.3,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage Low @ IOVDD=3.3V | VIL | -0.3 | 0.8 | V |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 RUN","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Input Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V"}],"voh":[{"max":3.3,"min":2.62,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage High @ IOVDD=3.3V | VOH | 2.62 | IOVDD | V | IOH = 2, 4, 8 or 12mA depending on setting |","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 RUN","unit":"V","symbol":"VOH","category":"characteristic","parameter":"Output Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting"}],"vol":[{"max":0.5,"min":0,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage Low @ IOVDD=3.3V | VOL | 0 | 0.5 | V | IOL = 2, 4, 8 or 12mA depending on setting |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 RUN","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Output Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 RUN","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 RUN","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 RUN","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 RUN","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 RUN","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.8,"min":-0.5,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 RUN","unit":"V","symbol":"VPIN","category":"absolute_max","parameter":"Voltage at IO (absolute maximum)","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V)"}],"five_volt_tolerant":[{"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |; very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 RUN","value":false,"symbol":"","category":"absolute_max","parameter":"5 V tolerant","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 RUN","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"JP1-4","attrs":{"kind":"ground","label":"GND","position":"4","connector":"JP1","designator":"JP1-4","description":"Ground"},"sources":[{"page":14,"quote":"| 4 | GND | Power | Ground |","method":"table","fragment":"entities_headers.json","table_id":"14_2"}],"attr_src":{"kind":{"page":14,"quote":"| 4 | GND | Power | Ground |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"label":{"page":14,"quote":"| 4 | GND | Power | Ground |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"position":{"page":14,"quote":"| 4 | GND | Power | Ground |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"connector":{"page":14,"quote":"| 4 | GND | Power | Ground |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"designator":{"page":14,"quote":"| 4 | GND | Power | Ground |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"description":{"page":14,"quote":"| 4 | GND | Power | Ground |","method":"table","fragment":"entities_headers.json","table_id":"14_2"}},"functions":[],"electrical":{},"entity_type":"pin"},{"id":"JP1-5","attrs":{"kind":"gpio","label":"D2","number":37,"chip_pin":"GPIO25","position":"5","connector":"JP1","designator":"JP1-5","description":"Digital Pin 2","power_domain":"IOVDD"},"sources":[{"page":14,"quote":"| 5 | D2 | Digital | Digital Pin 2 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"}],"attr_src":{"kind":{"page":14,"quote":"| 5 | D2 | Digital | Digital Pin 2 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"label":{"page":14,"quote":"| 5 | D2 | Digital | Digital Pin 2 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"number":{"via":"chip u1 GPIO25","method":"chip_link"},"chip_pin":{"page":14,"quote":"| 5 | D2 | Digital | Digital Pin 2 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"position":{"page":14,"quote":"| 5 | D2 | Digital | Digital Pin 2 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"connector":{"page":14,"quote":"| 5 | D2 | Digital | Digital Pin 2 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"designator":{"page":14,"quote":"| 5 | D2 | Digital | Digital Pin 2 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"description":{"page":14,"quote":"| 5 | D2 | Digital | Digital Pin 2 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"power_domain":{"via":"chip u1 GPIO25","method":"chip_link"}},"chip_pin":{"pin":"GPIO25","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"D2 GPIO25","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"D2","category":"gpio"},{"src":{"page":22,"quote":"D2 GPIO25","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"GPIO25","category":"gpio"},{"src":{"page":22,"quote":"D2 GPIO25","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"PWM","category":"pwm"},{"alt":"F1","src":{"page":14,"quote":"| 25 | SPI1 CSn | UART1 RX | I2C0 SCL | PWM4 B | SIO | PIO0 | PIO1 | CLOCK GPOUT3 | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO25","signal":"SPI1_CSn","category":"spi","instance":"1","peripheral":"SPI"},{"alt":"F2","src":{"page":14,"quote":"| 25 | SPI1 CSn | UART1 RX | I2C0 SCL | PWM4 B | SIO | PIO0 | PIO1 | CLOCK GPOUT3 | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO25","signal":"UART1_RX","category":"uart","instance":"1","peripheral":"UART"},{"alt":"F3","src":{"page":14,"quote":"| 25 | SPI1 CSn | UART1 RX | I2C0 SCL | PWM4 B | SIO | PIO0 | PIO1 | CLOCK GPOUT3 | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO25","signal":"I2C0_SCL","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":14,"quote":"| 25 | SPI1 CSn | UART1 RX | I2C0 SCL | PWM4 B | SIO | PIO0 | PIO1 | CLOCK GPOUT3 | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO25","signal":"PWM4_B","category":"pwm","instance":"4","peripheral":"PWM"},{"alt":"F5","src":{"page":14,"quote":"| 25 | SPI1 CSn | UART1 RX | I2C0 SCL | PWM4 B | SIO | PIO0 | PIO1 | CLOCK GPOUT3 | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO25","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":14,"quote":"| 25 | SPI1 CSn | UART1 RX | I2C0 SCL | PWM4 B | SIO | PIO0 | PIO1 | CLOCK GPOUT3 | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO25","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":14,"quote":"| 25 | SPI1 CSn | UART1 RX | I2C0 SCL | PWM4 B | SIO | PIO0 | PIO1 | CLOCK GPOUT3 | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO25","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F8","src":{"page":14,"quote":"| 25 | SPI1 CSn | UART1 RX | I2C0 SCL | PWM4 B | SIO | PIO0 | PIO1 | CLOCK GPOUT3 | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO25","signal":"CLOCK_GPOUT3","category":"clock","instance":"3","peripheral":"CLOCK"},{"alt":"F9","src":{"page":14,"quote":"| 25 | SPI1 CSn | UART1 RX | I2C0 SCL | PWM4 B | SIO | PIO0 | PIO1 | CLOCK GPOUT3 | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO25","signal":"USB_VBUS_DET","category":"usb","instance":null,"peripheral":"USB"}],"electrical":{"ioh":[{"max":0.008,"src":{"page":7,"quote":"| IOH Max | Current at VDD-0.4 V, output set high |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VDD-0.4 V, output high (board)"}],"iol":[{"max":0.008,"src":{"page":7,"quote":"| IOL Max | Current at VSS+0.4 V, output set low |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VSS+0.4 V, output low (board)"}],"vih":[{"max":3.3,"min":2.31,"src":{"page":7,"quote":"| VIH | Input high-level voltage | 2.31 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input high-level voltage (board)"}],"vil":[{"max":0.99,"min":0,"src":{"page":7,"quote":"| VIL | Input low-level voltage | 0 | - | 0.99 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input low-level voltage (board)"}],"voh":[{"max":3.3,"min":2.7,"src":{"page":7,"quote":"| VOH | Output high voltage, 8 mA | 2.7 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output high voltage @ 8 mA (board)","conditions":"IOH = 8 mA"}],"vol":[{"max":0.4,"min":0,"src":{"page":7,"quote":"| VOL | Output low voltage, 8 mA | 0 | - | 0.4 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output low voltage @ 8 mA (board)","conditions":"IOL = 8 mA"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO25","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 GPIO25","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO25","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO25","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":10,"quote":"board. The RP2040 runs at 3.3V and has an internal voltage regulator providing 1.1V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO25","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.3,"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Maximum GPIO input voltage"}],"five_volt_tolerant":[{"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 GPIO25","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"JP1-6","attrs":{"kind":"gpio","label":"D3","number":18,"chip_pin":"GPIO15","position":"6","connector":"JP1","designator":"JP1-6","description":"Digital Pin 3","power_domain":"IOVDD"},"sources":[{"page":14,"quote":"| 6 | D3 | Digital | Digital Pin 3 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"}],"attr_src":{"kind":{"page":14,"quote":"| 6 | D3 | Digital | Digital Pin 3 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"label":{"page":14,"quote":"| 6 | D3 | Digital | Digital Pin 3 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"number":{"via":"chip u1 GPIO15","method":"chip_link"},"chip_pin":{"page":14,"quote":"| 6 | D3 | Digital | Digital Pin 3 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"position":{"page":14,"quote":"| 6 | D3 | Digital | Digital Pin 3 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"connector":{"page":14,"quote":"| 6 | D3 | Digital | Digital Pin 3 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"designator":{"page":14,"quote":"| 6 | D3 | Digital | Digital Pin 3 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"description":{"page":14,"quote":"| 6 | D3 | Digital | Digital Pin 3 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"power_domain":{"via":"chip u1 GPIO15","method":"chip_link"}},"chip_pin":{"pin":"GPIO15","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"D3 GPIO15","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"D3","category":"gpio"},{"src":{"page":22,"quote":"D3 GPIO15","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"GPIO15","category":"gpio"},{"src":{"page":22,"quote":"D3 GPIO15","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"PWM","category":"pwm"},{"alt":"F1","src":{"page":13,"quote":"| 15 | SPI1 TX | UART0 RTS | I2C1 SCL | PWM7 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO15","signal":"SPI1_TX","category":"spi","instance":"1","peripheral":"SPI"},{"alt":"F2","src":{"page":13,"quote":"| 15 | SPI1 TX | UART0 RTS | I2C1 SCL | PWM7 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO15","signal":"UART0_RTS","category":"uart","instance":"0","peripheral":"UART"},{"alt":"F3","src":{"page":13,"quote":"| 15 | SPI1 TX | UART0 RTS | I2C1 SCL | PWM7 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO15","signal":"I2C1_SCL","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":13,"quote":"| 15 | SPI1 TX | UART0 RTS | I2C1 SCL | PWM7 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO15","signal":"PWM7_B","category":"pwm","instance":"7","peripheral":"PWM"},{"alt":"F5","src":{"page":13,"quote":"| 15 | SPI1 TX | UART0 RTS | I2C1 SCL | PWM7 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO15","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":13,"quote":"| 15 | SPI1 TX | UART0 RTS | I2C1 SCL | PWM7 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO15","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":13,"quote":"| 15 | SPI1 TX | UART0 RTS | I2C1 SCL | PWM7 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO15","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":13,"quote":"| 15 | SPI1 TX | UART0 RTS | I2C1 SCL | PWM7 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO15","signal":"USB_OVCUR_DET","category":"usb","instance":null,"peripheral":"USB"}],"electrical":{"ioh":[{"max":0.008,"src":{"page":7,"quote":"| IOH Max | Current at VDD-0.4 V, output set high |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VDD-0.4 V, output high (board)"}],"iol":[{"max":0.008,"src":{"page":7,"quote":"| IOL Max | Current at VSS+0.4 V, output set low |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VSS+0.4 V, output low (board)"}],"vih":[{"max":3.3,"min":2.31,"src":{"page":7,"quote":"| VIH | Input high-level voltage | 2.31 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input high-level voltage (board)"}],"vil":[{"max":0.99,"min":0,"src":{"page":7,"quote":"| VIL | Input low-level voltage | 0 | - | 0.99 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input low-level voltage (board)"}],"voh":[{"max":3.3,"min":2.7,"src":{"page":7,"quote":"| VOH | Output high voltage, 8 mA | 2.7 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output high voltage @ 8 mA (board)","conditions":"IOH = 8 mA"}],"vol":[{"max":0.4,"min":0,"src":{"page":7,"quote":"| VOL | Output low voltage, 8 mA | 0 | - | 0.4 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output low voltage @ 8 mA (board)","conditions":"IOL = 8 mA"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO15","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 GPIO15","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO15","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO15","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":10,"quote":"board. The RP2040 runs at 3.3V and has an internal voltage regulator providing 1.1V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO15","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.3,"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Maximum GPIO input voltage"}],"five_volt_tolerant":[{"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 GPIO15","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"JP1-7","attrs":{"kind":"gpio","label":"D4","number":27,"chip_pin":"GPIO16","position":"7","connector":"JP1","designator":"JP1-7","description":"Digital Pin 4","power_domain":"IOVDD"},"sources":[{"page":14,"quote":"| 7 | D4 | Digital | Digital Pin 4 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"}],"attr_src":{"kind":{"page":14,"quote":"| 7 | D4 | Digital | Digital Pin 4 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"label":{"page":14,"quote":"| 7 | D4 | Digital | Digital Pin 4 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"number":{"via":"chip u1 GPIO16","method":"chip_link"},"chip_pin":{"page":14,"quote":"| 7 | D4 | Digital | Digital Pin 4 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"position":{"page":14,"quote":"| 7 | D4 | Digital | Digital Pin 4 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"connector":{"page":14,"quote":"| 7 | D4 | Digital | Digital Pin 4 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"designator":{"page":14,"quote":"| 7 | D4 | Digital | Digital Pin 4 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"description":{"page":14,"quote":"| 7 | D4 | Digital | Digital Pin 4 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"power_domain":{"via":"chip u1 GPIO16","method":"chip_link"}},"chip_pin":{"pin":"GPIO16","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"D4 GPIO16","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"D4","category":"gpio"},{"src":{"page":22,"quote":"D4 GPIO16","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"GPIO16","category":"gpio"},{"src":{"page":22,"quote":"D4 GPIO16","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"PWM","category":"pwm"},{"alt":"F1","src":{"page":13,"quote":"| 16 | SPI0 RX | UART0 TX | I2C0 SDA | PWM0 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO16","signal":"SPI0_RX","category":"spi","instance":"0","peripheral":"SPI"},{"alt":"F2","src":{"page":13,"quote":"| 16 | SPI0 RX | UART0 TX | I2C0 SDA | PWM0 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO16","signal":"UART0_TX","category":"uart","instance":"0","peripheral":"UART"},{"alt":"F3","src":{"page":13,"quote":"| 16 | SPI0 RX | UART0 TX | I2C0 SDA | PWM0 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO16","signal":"I2C0_SDA","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":13,"quote":"| 16 | SPI0 RX | UART0 TX | I2C0 SDA | PWM0 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO16","signal":"PWM0_A","category":"pwm","instance":"0","peripheral":"PWM"},{"alt":"F5","src":{"page":13,"quote":"| 16 | SPI0 RX | UART0 TX | I2C0 SDA | PWM0 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO16","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":13,"quote":"| 16 | SPI0 RX | UART0 TX | I2C0 SDA | PWM0 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO16","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":13,"quote":"| 16 | SPI0 RX | UART0 TX | I2C0 SDA | PWM0 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO16","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":13,"quote":"| 16 | SPI0 RX | UART0 TX | I2C0 SDA | PWM0 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO16","signal":"USB_VBUS_DET","category":"usb","instance":null,"peripheral":"USB"}],"electrical":{"ioh":[{"max":0.008,"src":{"page":7,"quote":"| IOH Max | Current at VDD-0.4 V, output set high |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VDD-0.4 V, output high (board)"}],"iol":[{"max":0.008,"src":{"page":7,"quote":"| IOL Max | Current at VSS+0.4 V, output set low |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VSS+0.4 V, output low (board)"}],"vih":[{"max":3.3,"min":2.31,"src":{"page":7,"quote":"| VIH | Input high-level voltage | 2.31 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input high-level voltage (board)"}],"vil":[{"max":0.99,"min":0,"src":{"page":7,"quote":"| VIL | Input low-level voltage | 0 | - | 0.99 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input low-level voltage (board)"}],"voh":[{"max":3.3,"min":2.7,"src":{"page":7,"quote":"| VOH | Output high voltage, 8 mA | 2.7 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output high voltage @ 8 mA (board)","conditions":"IOH = 8 mA"}],"vol":[{"max":0.4,"min":0,"src":{"page":7,"quote":"| VOL | Output low voltage, 8 mA | 0 | - | 0.4 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output low voltage @ 8 mA (board)","conditions":"IOL = 8 mA"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO16","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 GPIO16","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO16","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO16","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":10,"quote":"board. The RP2040 runs at 3.3V and has an internal voltage regulator providing 1.1V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO16","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.3,"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Maximum GPIO input voltage"}],"five_volt_tolerant":[{"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 GPIO16","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"JP1-8","attrs":{"kind":"gpio","label":"D5","number":28,"chip_pin":"GPIO17","position":"8","connector":"JP1","designator":"JP1-8","description":"Digital Pin 5","power_domain":"IOVDD"},"sources":[{"page":14,"quote":"| 8 | D5 | Digital | Digital Pin 5 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"}],"attr_src":{"kind":{"page":14,"quote":"| 8 | D5 | Digital | Digital Pin 5 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"label":{"page":14,"quote":"| 8 | D5 | Digital | Digital Pin 5 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"number":{"via":"chip u1 GPIO17","method":"chip_link"},"chip_pin":{"page":14,"quote":"| 8 | D5 | Digital | Digital Pin 5 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"position":{"page":14,"quote":"| 8 | D5 | Digital | Digital Pin 5 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"connector":{"page":14,"quote":"| 8 | D5 | Digital | Digital Pin 5 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"designator":{"page":14,"quote":"| 8 | D5 | Digital | Digital Pin 5 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"description":{"page":14,"quote":"| 8 | D5 | Digital | Digital Pin 5 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"power_domain":{"via":"chip u1 GPIO17","method":"chip_link"}},"chip_pin":{"pin":"GPIO17","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"D5 GPIO17","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"D5","category":"gpio"},{"src":{"page":22,"quote":"D5 GPIO17","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"GPIO17","category":"gpio"},{"src":{"page":22,"quote":"D5 GPIO17","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"PWM","category":"pwm"},{"alt":"F1","src":{"page":13,"quote":"| 17 | SPI0 CSn | UART0 RX | I2C0 SCL | PWM0 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO17","signal":"SPI0_CSn","category":"spi","instance":"0","peripheral":"SPI"},{"alt":"F2","src":{"page":13,"quote":"| 17 | SPI0 CSn | UART0 RX | I2C0 SCL | PWM0 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO17","signal":"UART0_RX","category":"uart","instance":"0","peripheral":"UART"},{"alt":"F3","src":{"page":13,"quote":"| 17 | SPI0 CSn | UART0 RX | I2C0 SCL | PWM0 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO17","signal":"I2C0_SCL","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":13,"quote":"| 17 | SPI0 CSn | UART0 RX | I2C0 SCL | PWM0 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO17","signal":"PWM0_B","category":"pwm","instance":"0","peripheral":"PWM"},{"alt":"F5","src":{"page":13,"quote":"| 17 | SPI0 CSn | UART0 RX | I2C0 SCL | PWM0 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO17","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":13,"quote":"| 17 | SPI0 CSn | UART0 RX | I2C0 SCL | PWM0 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO17","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":13,"quote":"| 17 | SPI0 CSn | UART0 RX | I2C0 SCL | PWM0 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO17","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":13,"quote":"| 17 | SPI0 CSn | UART0 RX | I2C0 SCL | PWM0 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO17","signal":"USB_VBUS_EN","category":"usb","instance":null,"peripheral":"USB"}],"electrical":{"ioh":[{"max":0.008,"src":{"page":7,"quote":"| IOH Max | Current at VDD-0.4 V, output set high |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VDD-0.4 V, output high (board)"}],"iol":[{"max":0.008,"src":{"page":7,"quote":"| IOL Max | Current at VSS+0.4 V, output set low |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VSS+0.4 V, output low (board)"}],"vih":[{"max":3.3,"min":2.31,"src":{"page":7,"quote":"| VIH | Input high-level voltage | 2.31 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input high-level voltage (board)"}],"vil":[{"max":0.99,"min":0,"src":{"page":7,"quote":"| VIL | Input low-level voltage | 0 | - | 0.99 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input low-level voltage (board)"}],"voh":[{"max":3.3,"min":2.7,"src":{"page":7,"quote":"| VOH | Output high voltage, 8 mA | 2.7 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output high voltage @ 8 mA (board)","conditions":"IOH = 8 mA"}],"vol":[{"max":0.4,"min":0,"src":{"page":7,"quote":"| VOL | Output low voltage, 8 mA | 0 | - | 0.4 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output low voltage @ 8 mA (board)","conditions":"IOL = 8 mA"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO17","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 GPIO17","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO17","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO17","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":10,"quote":"board. The RP2040 runs at 3.3V and has an internal voltage regulator providing 1.1V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO17","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.3,"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Maximum GPIO input voltage"}],"five_volt_tolerant":[{"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 GPIO17","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"JP1-9","attrs":{"kind":"gpio","label":"D6","number":29,"chip_pin":"GPIO18","position":"9","connector":"JP1","designator":"JP1-9","description":"Digital Pin 6","power_domain":"IOVDD"},"sources":[{"page":14,"quote":"| 9 | D6 | Digital | Digital Pin 6 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"}],"attr_src":{"kind":{"page":14,"quote":"| 9 | D6 | Digital | Digital Pin 6 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"label":{"page":14,"quote":"| 9 | D6 | Digital | Digital Pin 6 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"number":{"via":"chip u1 GPIO18","method":"chip_link"},"chip_pin":{"page":14,"quote":"| 9 | D6 | Digital | Digital Pin 6 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"position":{"page":14,"quote":"| 9 | D6 | Digital | Digital Pin 6 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"connector":{"page":14,"quote":"| 9 | D6 | Digital | Digital Pin 6 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"designator":{"page":14,"quote":"| 9 | D6 | Digital | Digital Pin 6 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"description":{"page":14,"quote":"| 9 | D6 | Digital | Digital Pin 6 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"power_domain":{"via":"chip u1 GPIO18","method":"chip_link"}},"chip_pin":{"pin":"GPIO18","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"D6 GPIO18","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"D6","category":"gpio"},{"src":{"page":22,"quote":"D6 GPIO18","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"GPIO18","category":"gpio"},{"src":{"page":22,"quote":"D6 GPIO18","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"PWM","category":"pwm"},{"alt":"F1","src":{"page":13,"quote":"| 18 | SPI0 SCK | UART0 CTS | I2C1 SDA | PWM1 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO18","signal":"SPI0_SCK","category":"spi","instance":"0","peripheral":"SPI"},{"alt":"F2","src":{"page":13,"quote":"| 18 | SPI0 SCK | UART0 CTS | I2C1 SDA | PWM1 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO18","signal":"UART0_CTS","category":"uart","instance":"0","peripheral":"UART"},{"alt":"F3","src":{"page":13,"quote":"| 18 | SPI0 SCK | UART0 CTS | I2C1 SDA | PWM1 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO18","signal":"I2C1_SDA","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":13,"quote":"| 18 | SPI0 SCK | UART0 CTS | I2C1 SDA | PWM1 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO18","signal":"PWM1_A","category":"pwm","instance":"1","peripheral":"PWM"},{"alt":"F5","src":{"page":13,"quote":"| 18 | SPI0 SCK | UART0 CTS | I2C1 SDA | PWM1 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO18","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":13,"quote":"| 18 | SPI0 SCK | UART0 CTS | I2C1 SDA | PWM1 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO18","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":13,"quote":"| 18 | SPI0 SCK | UART0 CTS | I2C1 SDA | PWM1 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO18","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":13,"quote":"| 18 | SPI0 SCK | UART0 CTS | I2C1 SDA | PWM1 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO18","signal":"USB_OVCUR_DET","category":"usb","instance":null,"peripheral":"USB"}],"electrical":{"ioh":[{"max":0.008,"src":{"page":7,"quote":"| IOH Max | Current at VDD-0.4 V, output set high |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VDD-0.4 V, output high (board)"}],"iol":[{"max":0.008,"src":{"page":7,"quote":"| IOL Max | Current at VSS+0.4 V, output set low |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VSS+0.4 V, output low (board)"}],"vih":[{"max":3.3,"min":2.31,"src":{"page":7,"quote":"| VIH | Input high-level voltage | 2.31 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input high-level voltage (board)"}],"vil":[{"max":0.99,"min":0,"src":{"page":7,"quote":"| VIL | Input low-level voltage | 0 | - | 0.99 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input low-level voltage (board)"}],"voh":[{"max":3.3,"min":2.7,"src":{"page":7,"quote":"| VOH | Output high voltage, 8 mA | 2.7 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output high voltage @ 8 mA (board)","conditions":"IOH = 8 mA"}],"vol":[{"max":0.4,"min":0,"src":{"page":7,"quote":"| VOL | Output low voltage, 8 mA | 0 | - | 0.4 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output low voltage @ 8 mA (board)","conditions":"IOL = 8 mA"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO18","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 GPIO18","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO18","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO18","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":10,"quote":"board. The RP2040 runs at 3.3V and has an internal voltage regulator providing 1.1V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO18","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.3,"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Maximum GPIO input voltage"}],"five_volt_tolerant":[{"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 GPIO18","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"JP1-10","attrs":{"kind":"gpio","label":"D7","number":30,"chip_pin":"GPIO19","position":"10","connector":"JP1","designator":"JP1-10","description":"Digital Pin 7","power_domain":"IOVDD"},"sources":[{"page":14,"quote":"| 10 | D7 | Digital | Digital Pin 7 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"}],"attr_src":{"kind":{"page":14,"quote":"| 10 | D7 | Digital | Digital Pin 7 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"label":{"page":14,"quote":"| 10 | D7 | Digital | Digital Pin 7 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"number":{"via":"chip u1 GPIO19","method":"chip_link"},"chip_pin":{"page":14,"quote":"| 10 | D7 | Digital | Digital Pin 7 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"position":{"page":14,"quote":"| 10 | D7 | Digital | Digital Pin 7 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"connector":{"page":14,"quote":"| 10 | D7 | Digital | Digital Pin 7 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"designator":{"page":14,"quote":"| 10 | D7 | Digital | Digital Pin 7 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"description":{"page":14,"quote":"| 10 | D7 | Digital | Digital Pin 7 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"power_domain":{"via":"chip u1 GPIO19","method":"chip_link"}},"chip_pin":{"pin":"GPIO19","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"D7 GPIO19","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"D7","category":"gpio"},{"src":{"page":22,"quote":"D7 GPIO19","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"GPIO19","category":"gpio"},{"src":{"page":22,"quote":"D7 GPIO19","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"PWM","category":"pwm"},{"alt":"F1","src":{"page":13,"quote":"| 19 | SPI0 TX | UART0 RTS | I2C1 SCL | PWM1 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO19","signal":"SPI0_TX","category":"spi","instance":"0","peripheral":"SPI"},{"alt":"F2","src":{"page":13,"quote":"| 19 | SPI0 TX | UART0 RTS | I2C1 SCL | PWM1 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO19","signal":"UART0_RTS","category":"uart","instance":"0","peripheral":"UART"},{"alt":"F3","src":{"page":13,"quote":"| 19 | SPI0 TX | UART0 RTS | I2C1 SCL | PWM1 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO19","signal":"I2C1_SCL","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":13,"quote":"| 19 | SPI0 TX | UART0 RTS | I2C1 SCL | PWM1 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO19","signal":"PWM1_B","category":"pwm","instance":"1","peripheral":"PWM"},{"alt":"F5","src":{"page":13,"quote":"| 19 | SPI0 TX | UART0 RTS | I2C1 SCL | PWM1 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO19","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":13,"quote":"| 19 | SPI0 TX | UART0 RTS | I2C1 SCL | PWM1 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO19","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":13,"quote":"| 19 | SPI0 TX | UART0 RTS | I2C1 SCL | PWM1 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO19","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":13,"quote":"| 19 | SPI0 TX | UART0 RTS | I2C1 SCL | PWM1 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO19","signal":"USB_VBUS_DET","category":"usb","instance":null,"peripheral":"USB"}],"electrical":{"ioh":[{"max":0.008,"src":{"page":7,"quote":"| IOH Max | Current at VDD-0.4 V, output set high |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VDD-0.4 V, output high (board)"}],"iol":[{"max":0.008,"src":{"page":7,"quote":"| IOL Max | Current at VSS+0.4 V, output set low |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VSS+0.4 V, output low (board)"}],"vih":[{"max":3.3,"min":2.31,"src":{"page":7,"quote":"| VIH | Input high-level voltage | 2.31 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input high-level voltage (board)"}],"vil":[{"max":0.99,"min":0,"src":{"page":7,"quote":"| VIL | Input low-level voltage | 0 | - | 0.99 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input low-level voltage (board)"}],"voh":[{"max":3.3,"min":2.7,"src":{"page":7,"quote":"| VOH | Output high voltage, 8 mA | 2.7 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output high voltage @ 8 mA (board)","conditions":"IOH = 8 mA"}],"vol":[{"max":0.4,"min":0,"src":{"page":7,"quote":"| VOL | Output low voltage, 8 mA | 0 | - | 0.4 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output low voltage @ 8 mA (board)","conditions":"IOL = 8 mA"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO19","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 GPIO19","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO19","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO19","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":10,"quote":"board. The RP2040 runs at 3.3V and has an internal voltage regulator providing 1.1V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO19","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.3,"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Maximum GPIO input voltage"}],"five_volt_tolerant":[{"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 GPIO19","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"JP1-11","attrs":{"kind":"gpio","label":"D8","number":31,"chip_pin":"GPIO20","position":"11","connector":"JP1","designator":"JP1-11","description":"Digital Pin 8","power_domain":"IOVDD"},"sources":[{"page":14,"quote":"| 11 | D8 | Digital | Digital Pin 8 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"}],"attr_src":{"kind":{"page":14,"quote":"| 11 | D8 | Digital | Digital Pin 8 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"label":{"page":14,"quote":"| 11 | D8 | Digital | Digital Pin 8 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"number":{"via":"chip u1 GPIO20","method":"chip_link"},"chip_pin":{"page":14,"quote":"| 11 | D8 | Digital | Digital Pin 8 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"position":{"page":14,"quote":"| 11 | D8 | Digital | Digital Pin 8 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"connector":{"page":14,"quote":"| 11 | D8 | Digital | Digital Pin 8 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"designator":{"page":14,"quote":"| 11 | D8 | Digital | Digital Pin 8 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"description":{"page":14,"quote":"| 11 | D8 | Digital | Digital Pin 8 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"power_domain":{"via":"chip u1 GPIO20","method":"chip_link"}},"chip_pin":{"pin":"GPIO20","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"D8 GPIO20","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"D8","category":"gpio"},{"src":{"page":22,"quote":"D8 GPIO20","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"GPIO20","category":"gpio"},{"src":{"page":22,"quote":"D8 GPIO20","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"PWM","category":"pwm"},{"alt":"F1","src":{"page":13,"quote":"| 20 | SPI0 RX | UART1 TX | I2C0 SDA | PWM2 A | SIO | PIO0 | PIO1 | CLOCK GPIN0 | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO20","signal":"SPI0_RX","category":"spi","instance":"0","peripheral":"SPI"},{"alt":"F2","src":{"page":13,"quote":"| 20 | SPI0 RX | UART1 TX | I2C0 SDA | PWM2 A | SIO | PIO0 | PIO1 | CLOCK GPIN0 | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO20","signal":"UART1_TX","category":"uart","instance":"1","peripheral":"UART"},{"alt":"F3","src":{"page":13,"quote":"| 20 | SPI0 RX | UART1 TX | I2C0 SDA | PWM2 A | SIO | PIO0 | PIO1 | CLOCK GPIN0 | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO20","signal":"I2C0_SDA","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":13,"quote":"| 20 | SPI0 RX | UART1 TX | I2C0 SDA | PWM2 A | SIO | PIO0 | PIO1 | CLOCK GPIN0 | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO20","signal":"PWM2_A","category":"pwm","instance":"2","peripheral":"PWM"},{"alt":"F5","src":{"page":13,"quote":"| 20 | SPI0 RX | UART1 TX | I2C0 SDA | PWM2 A | SIO | PIO0 | PIO1 | CLOCK GPIN0 | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO20","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":13,"quote":"| 20 | SPI0 RX | UART1 TX | I2C0 SDA | PWM2 A | SIO | PIO0 | PIO1 | CLOCK GPIN0 | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO20","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":13,"quote":"| 20 | SPI0 RX | UART1 TX | I2C0 SDA | PWM2 A | SIO | PIO0 | PIO1 | CLOCK GPIN0 | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO20","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F8","src":{"page":13,"quote":"| 20 | SPI0 RX | UART1 TX | I2C0 SDA | PWM2 A | SIO | PIO0 | PIO1 | CLOCK GPIN0 | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO20","signal":"CLOCK_GPIN0","category":"clock","instance":"0","peripheral":"CLOCK"},{"alt":"F9","src":{"page":13,"quote":"| 20 | SPI0 RX | UART1 TX | I2C0 SDA | PWM2 A | SIO | PIO0 | PIO1 | CLOCK GPIN0 | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO20","signal":"USB_VBUS_EN","category":"usb","instance":null,"peripheral":"USB"}],"electrical":{"ioh":[{"max":0.008,"src":{"page":7,"quote":"| IOH Max | Current at VDD-0.4 V, output set high |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VDD-0.4 V, output high (board)"}],"iol":[{"max":0.008,"src":{"page":7,"quote":"| IOL Max | Current at VSS+0.4 V, output set low |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VSS+0.4 V, output low (board)"}],"vih":[{"max":3.3,"min":2.31,"src":{"page":7,"quote":"| VIH | Input high-level voltage | 2.31 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input high-level voltage (board)"}],"vil":[{"max":0.99,"min":0,"src":{"page":7,"quote":"| VIL | Input low-level voltage | 0 | - | 0.99 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input low-level voltage (board)"}],"voh":[{"max":3.3,"min":2.7,"src":{"page":7,"quote":"| VOH | Output high voltage, 8 mA | 2.7 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output high voltage @ 8 mA (board)","conditions":"IOH = 8 mA"}],"vol":[{"max":0.4,"min":0,"src":{"page":7,"quote":"| VOL | Output low voltage, 8 mA | 0 | - | 0.4 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output low voltage @ 8 mA (board)","conditions":"IOL = 8 mA"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO20","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 GPIO20","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO20","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO20","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":10,"quote":"board. The RP2040 runs at 3.3V and has an internal voltage regulator providing 1.1V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO20","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.3,"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Maximum GPIO input voltage"}],"five_volt_tolerant":[{"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 GPIO20","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"JP1-12","attrs":{"kind":"gpio","label":"D9","number":32,"chip_pin":"GPIO21","position":"12","connector":"JP1","designator":"JP1-12","description":"Digital Pin 9","power_domain":"IOVDD"},"sources":[{"page":14,"quote":"| 12 | D9 | Digital | Digital Pin 9 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"}],"attr_src":{"kind":{"page":14,"quote":"| 12 | D9 | Digital | Digital Pin 9 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"label":{"page":14,"quote":"| 12 | D9 | Digital | Digital Pin 9 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"number":{"via":"chip u1 GPIO21","method":"chip_link"},"chip_pin":{"page":14,"quote":"| 12 | D9 | Digital | Digital Pin 9 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"position":{"page":14,"quote":"| 12 | D9 | Digital | Digital Pin 9 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"connector":{"page":14,"quote":"| 12 | D9 | Digital | Digital Pin 9 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"designator":{"page":14,"quote":"| 12 | D9 | Digital | Digital Pin 9 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"description":{"page":14,"quote":"| 12 | D9 | Digital | Digital Pin 9 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"power_domain":{"via":"chip u1 GPIO21","method":"chip_link"}},"chip_pin":{"pin":"GPIO21","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"D9 GPIO21","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"D9","category":"gpio"},{"src":{"page":22,"quote":"D9 GPIO21","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"GPIO21","category":"gpio"},{"src":{"page":22,"quote":"D9 GPIO21","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"PWM","category":"pwm"},{"alt":"F1","src":{"page":13,"quote":"| 21 | SPI0 CSn | UART1 RX | I2C0 SCL | PWM2 B | SIO | PIO0 | PIO1 | CLOCK GPOUT0 | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO21","signal":"SPI0_CSn","category":"spi","instance":"0","peripheral":"SPI"},{"alt":"F2","src":{"page":13,"quote":"| 21 | SPI0 CSn | UART1 RX | I2C0 SCL | PWM2 B | SIO | PIO0 | PIO1 | CLOCK GPOUT0 | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO21","signal":"UART1_RX","category":"uart","instance":"1","peripheral":"UART"},{"alt":"F3","src":{"page":13,"quote":"| 21 | SPI0 CSn | UART1 RX | I2C0 SCL | PWM2 B | SIO | PIO0 | PIO1 | CLOCK GPOUT0 | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO21","signal":"I2C0_SCL","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":13,"quote":"| 21 | SPI0 CSn | UART1 RX | I2C0 SCL | PWM2 B | SIO | PIO0 | PIO1 | CLOCK GPOUT0 | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO21","signal":"PWM2_B","category":"pwm","instance":"2","peripheral":"PWM"},{"alt":"F5","src":{"page":13,"quote":"| 21 | SPI0 CSn | UART1 RX | I2C0 SCL | PWM2 B | SIO | PIO0 | PIO1 | CLOCK GPOUT0 | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO21","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":13,"quote":"| 21 | SPI0 CSn | UART1 RX | I2C0 SCL | PWM2 B | SIO | PIO0 | PIO1 | CLOCK GPOUT0 | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO21","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":13,"quote":"| 21 | SPI0 CSn | UART1 RX | I2C0 SCL | PWM2 B | SIO | PIO0 | PIO1 | CLOCK GPOUT0 | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO21","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F8","src":{"page":13,"quote":"| 21 | SPI0 CSn | UART1 RX | I2C0 SCL | PWM2 B | SIO | PIO0 | PIO1 | CLOCK GPOUT0 | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO21","signal":"CLOCK_GPOUT0","category":"clock","instance":"0","peripheral":"CLOCK"},{"alt":"F9","src":{"page":13,"quote":"| 21 | SPI0 CSn | UART1 RX | I2C0 SCL | PWM2 B | SIO | PIO0 | PIO1 | CLOCK GPOUT0 | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO21","signal":"USB_OVCUR_DET","category":"usb","instance":null,"peripheral":"USB"}],"electrical":{"ioh":[{"max":0.008,"src":{"page":7,"quote":"| IOH Max | Current at VDD-0.4 V, output set high |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VDD-0.4 V, output high (board)"}],"iol":[{"max":0.008,"src":{"page":7,"quote":"| IOL Max | Current at VSS+0.4 V, output set low |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VSS+0.4 V, output low (board)"}],"vih":[{"max":3.3,"min":2.31,"src":{"page":7,"quote":"| VIH | Input high-level voltage | 2.31 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input high-level voltage (board)"}],"vil":[{"max":0.99,"min":0,"src":{"page":7,"quote":"| VIL | Input low-level voltage | 0 | - | 0.99 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input low-level voltage (board)"}],"voh":[{"max":3.3,"min":2.7,"src":{"page":7,"quote":"| VOH | Output high voltage, 8 mA | 2.7 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output high voltage @ 8 mA (board)","conditions":"IOH = 8 mA"}],"vol":[{"max":0.4,"min":0,"src":{"page":7,"quote":"| VOL | Output low voltage, 8 mA | 0 | - | 0.4 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output low voltage @ 8 mA (board)","conditions":"IOL = 8 mA"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO21","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 GPIO21","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO21","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO21","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":10,"quote":"board. The RP2040 runs at 3.3V and has an internal voltage regulator providing 1.1V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO21","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.3,"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Maximum GPIO input voltage"}],"five_volt_tolerant":[{"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 GPIO21","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"JP1-13","attrs":{"kind":"gpio","label":"D10","number":7,"chip_pin":"GPIO5","position":"13","connector":"JP1","designator":"JP1-13","description":"Digital Pin 10","power_domain":"IOVDD"},"sources":[{"page":14,"quote":"| 13 | D10 | Digital | Digital Pin 10 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"}],"attr_src":{"kind":{"page":14,"quote":"| 13 | D10 | Digital | Digital Pin 10 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"label":{"page":14,"quote":"| 13 | D10 | Digital | Digital Pin 10 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"number":{"via":"chip u1 GPIO5","method":"chip_link"},"chip_pin":{"page":14,"quote":"| 13 | D10 | Digital | Digital Pin 10 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"position":{"page":14,"quote":"| 13 | D10 | Digital | Digital Pin 10 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"connector":{"page":14,"quote":"| 13 | D10 | Digital | Digital Pin 10 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"designator":{"page":14,"quote":"| 13 | D10 | Digital | Digital Pin 10 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"description":{"page":14,"quote":"| 13 | D10 | Digital | Digital Pin 10 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"power_domain":{"via":"chip u1 GPIO5","method":"chip_link"}},"chip_pin":{"pin":"GPIO5","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"D10 GPIO05","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"D10","category":"gpio"},{"src":{"page":22,"quote":"D10 GPIO05","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"GPIO5","category":"gpio"},{"src":{"page":22,"quote":"D10 GPIO05","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"PWM","category":"pwm"},{"alt":"F1","src":{"page":13,"quote":"| 5 | SPI0 CSn | UART1 RX | I2C0 SCL | PWM2 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO5","signal":"SPI0_CSn","category":"spi","instance":"0","peripheral":"SPI"},{"alt":"F2","src":{"page":13,"quote":"| 5 | SPI0 CSn | UART1 RX | I2C0 SCL | PWM2 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO5","signal":"UART1_RX","category":"uart","instance":"1","peripheral":"UART"},{"alt":"F3","src":{"page":13,"quote":"| 5 | SPI0 CSn | UART1 RX | I2C0 SCL | PWM2 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO5","signal":"I2C0_SCL","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":13,"quote":"| 5 | SPI0 CSn | UART1 RX | I2C0 SCL | PWM2 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO5","signal":"PWM2_B","category":"pwm","instance":"2","peripheral":"PWM"},{"alt":"F5","src":{"page":13,"quote":"| 5 | SPI0 CSn | UART1 RX | I2C0 SCL | PWM2 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO5","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":13,"quote":"| 5 | SPI0 CSn | UART1 RX | I2C0 SCL | PWM2 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO5","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":13,"quote":"| 5 | SPI0 CSn | UART1 RX | I2C0 SCL | PWM2 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO5","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":13,"quote":"| 5 | SPI0 CSn | UART1 RX | I2C0 SCL | PWM2 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO5","signal":"USB_VBUS_EN","category":"usb","instance":null,"peripheral":"USB"}],"electrical":{"ioh":[{"max":0.008,"src":{"page":7,"quote":"| IOH Max | Current at VDD-0.4 V, output set high |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VDD-0.4 V, output high (board)"}],"iol":[{"max":0.008,"src":{"page":7,"quote":"| IOL Max | Current at VSS+0.4 V, output set low |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VSS+0.4 V, output low (board)"}],"vih":[{"max":3.3,"min":2.31,"src":{"page":7,"quote":"| VIH | Input high-level voltage | 2.31 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input high-level voltage (board)"}],"vil":[{"max":0.99,"min":0,"src":{"page":7,"quote":"| VIL | Input low-level voltage | 0 | - | 0.99 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input low-level voltage (board)"}],"voh":[{"max":3.3,"min":2.7,"src":{"page":7,"quote":"| VOH | Output high voltage, 8 mA | 2.7 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output high voltage @ 8 mA (board)","conditions":"IOH = 8 mA"}],"vol":[{"max":0.4,"min":0,"src":{"page":7,"quote":"| VOL | Output low voltage, 8 mA | 0 | - | 0.4 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output low voltage @ 8 mA (board)","conditions":"IOL = 8 mA"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO5","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 GPIO5","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO5","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO5","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":10,"quote":"board. The RP2040 runs at 3.3V and has an internal voltage regulator providing 1.1V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO5","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.3,"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Maximum GPIO input voltage"}],"five_volt_tolerant":[{"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 GPIO5","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"JP1-14","attrs":{"kind":"gpio","label":"D11","number":9,"chip_pin":"GPIO7","position":"14","connector":"JP1","designator":"JP1-14","description":"Digital Pin 11","power_domain":"IOVDD"},"sources":[{"page":14,"quote":"| 14 | D11 | Digital | Digital Pin 11 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"}],"attr_src":{"kind":{"page":14,"quote":"| 14 | D11 | Digital | Digital Pin 11 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"label":{"page":14,"quote":"| 14 | D11 | Digital | Digital Pin 11 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"number":{"via":"chip u1 GPIO7","method":"chip_link"},"chip_pin":{"page":14,"quote":"| 14 | D11 | Digital | Digital Pin 11 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"position":{"page":14,"quote":"| 14 | D11 | Digital | Digital Pin 11 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"connector":{"page":14,"quote":"| 14 | D11 | Digital | Digital Pin 11 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"designator":{"page":14,"quote":"| 14 | D11 | Digital | Digital Pin 11 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"description":{"page":14,"quote":"| 14 | D11 | Digital | Digital Pin 11 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"power_domain":{"via":"chip u1 GPIO7","method":"chip_link"}},"chip_pin":{"pin":"GPIO7","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"D11 GPIO07 COPI","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"D11","category":"gpio"},{"src":{"page":22,"quote":"D11 GPIO07 COPI","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"GPIO7","category":"gpio"},{"src":{"page":22,"quote":"D11 GPIO07 COPI","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"PWM","category":"pwm"},{"src":{"page":22,"quote":"D11 GPIO07 COPI","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"SPI COPI","category":"spi"},{"alt":"F1","src":{"page":13,"quote":"| 7 | SPI0 TX | UART1 RTS | I2C1 SCL | PWM3 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO7","signal":"SPI0_TX","category":"spi","instance":"0","peripheral":"SPI"},{"alt":"F2","src":{"page":13,"quote":"| 7 | SPI0 TX | UART1 RTS | I2C1 SCL | PWM3 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO7","signal":"UART1_RTS","category":"uart","instance":"1","peripheral":"UART"},{"alt":"F3","src":{"page":13,"quote":"| 7 | SPI0 TX | UART1 RTS | I2C1 SCL | PWM3 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO7","signal":"I2C1_SCL","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":13,"quote":"| 7 | SPI0 TX | UART1 RTS | I2C1 SCL | PWM3 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO7","signal":"PWM3_B","category":"pwm","instance":"3","peripheral":"PWM"},{"alt":"F5","src":{"page":13,"quote":"| 7 | SPI0 TX | UART1 RTS | I2C1 SCL | PWM3 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO7","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":13,"quote":"| 7 | SPI0 TX | UART1 RTS | I2C1 SCL | PWM3 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO7","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":13,"quote":"| 7 | SPI0 TX | UART1 RTS | I2C1 SCL | PWM3 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO7","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":13,"quote":"| 7 | SPI0 TX | UART1 RTS | I2C1 SCL | PWM3 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO7","signal":"USB_VBUS_DET","category":"usb","instance":null,"peripheral":"USB"}],"electrical":{"ioh":[{"max":0.008,"src":{"page":7,"quote":"| IOH Max | Current at VDD-0.4 V, output set high |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VDD-0.4 V, output high (board)"}],"iol":[{"max":0.008,"src":{"page":7,"quote":"| IOL Max | Current at VSS+0.4 V, output set low |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VSS+0.4 V, output low (board)"}],"vih":[{"max":3.3,"min":2.31,"src":{"page":7,"quote":"| VIH | Input high-level voltage | 2.31 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input high-level voltage (board)"}],"vil":[{"max":0.99,"min":0,"src":{"page":7,"quote":"| VIL | Input low-level voltage | 0 | - | 0.99 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input low-level voltage (board)"}],"voh":[{"max":3.3,"min":2.7,"src":{"page":7,"quote":"| VOH | Output high voltage, 8 mA | 2.7 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output high voltage @ 8 mA (board)","conditions":"IOH = 8 mA"}],"vol":[{"max":0.4,"min":0,"src":{"page":7,"quote":"| VOL | Output low voltage, 8 mA | 0 | - | 0.4 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output low voltage @ 8 mA (board)","conditions":"IOL = 8 mA"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO7","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 GPIO7","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO7","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO7","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":10,"quote":"board. The RP2040 runs at 3.3V and has an internal voltage regulator providing 1.1V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO7","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.3,"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Maximum GPIO input voltage"}],"five_volt_tolerant":[{"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 GPIO7","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"JP1-15","attrs":{"kind":"gpio","label":"D12","number":6,"chip_pin":"GPIO4","position":"15","connector":"JP1","designator":"JP1-15","description":"Digital Pin 12","power_domain":"IOVDD"},"sources":[{"page":14,"quote":"| 15 | D12 | Digital | Digital Pin 12 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"}],"attr_src":{"kind":{"page":14,"quote":"| 15 | D12 | Digital | Digital Pin 12 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"label":{"page":14,"quote":"| 15 | D12 | Digital | Digital Pin 12 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"number":{"via":"chip u1 GPIO4","method":"chip_link"},"chip_pin":{"page":14,"quote":"| 15 | D12 | Digital | Digital Pin 12 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"position":{"page":14,"quote":"| 15 | D12 | Digital | Digital Pin 12 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"connector":{"page":14,"quote":"| 15 | D12 | Digital | Digital Pin 12 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"designator":{"page":14,"quote":"| 15 | D12 | Digital | Digital Pin 12 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"description":{"page":14,"quote":"| 15 | D12 | Digital | Digital Pin 12 |","method":"table","fragment":"entities_headers.json","table_id":"14_2"},"power_domain":{"via":"chip u1 GPIO4","method":"chip_link"}},"chip_pin":{"pin":"GPIO4","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"D12 GPIO04 CIPO","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"D12","category":"gpio"},{"src":{"page":22,"quote":"D12 GPIO04 CIPO","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"GPIO4","category":"gpio"},{"src":{"page":22,"quote":"D12 GPIO04 CIPO","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"PWM","category":"pwm"},{"src":{"page":22,"quote":"D12 GPIO04 CIPO","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"SPI CIPO","category":"spi"},{"alt":"F1","src":{"page":13,"quote":"| 4 | SPI0 RX | UART1 TX | I2C0 SDA | PWM2 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO4","signal":"SPI0_RX","category":"spi","instance":"0","peripheral":"SPI"},{"alt":"F2","src":{"page":13,"quote":"| 4 | SPI0 RX | UART1 TX | I2C0 SDA | PWM2 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO4","signal":"UART1_TX","category":"uart","instance":"1","peripheral":"UART"},{"alt":"F3","src":{"page":13,"quote":"| 4 | SPI0 RX | UART1 TX | I2C0 SDA | PWM2 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO4","signal":"I2C0_SDA","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":13,"quote":"| 4 | SPI0 RX | UART1 TX | I2C0 SDA | PWM2 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO4","signal":"PWM2_A","category":"pwm","instance":"2","peripheral":"PWM"},{"alt":"F5","src":{"page":13,"quote":"| 4 | SPI0 RX | UART1 TX | I2C0 SDA | PWM2 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO4","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":13,"quote":"| 4 | SPI0 RX | UART1 TX | I2C0 SDA | PWM2 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO4","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":13,"quote":"| 4 | SPI0 RX | UART1 TX | I2C0 SDA | PWM2 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO4","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":13,"quote":"| 4 | SPI0 RX | UART1 TX | I2C0 SDA | PWM2 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO4","signal":"USB_VBUS_DET","category":"usb","instance":null,"peripheral":"USB"}],"electrical":{"ioh":[{"max":0.008,"src":{"page":7,"quote":"| IOH Max | Current at VDD-0.4 V, output set high |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VDD-0.4 V, output high (board)"}],"iol":[{"max":0.008,"src":{"page":7,"quote":"| IOL Max | Current at VSS+0.4 V, output set low |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VSS+0.4 V, output low (board)"}],"vih":[{"max":3.3,"min":2.31,"src":{"page":7,"quote":"| VIH | Input high-level voltage | 2.31 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input high-level voltage (board)"}],"vil":[{"max":0.99,"min":0,"src":{"page":7,"quote":"| VIL | Input low-level voltage | 0 | - | 0.99 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input low-level voltage (board)"}],"voh":[{"max":3.3,"min":2.7,"src":{"page":7,"quote":"| VOH | Output high voltage, 8 mA | 2.7 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output high voltage @ 8 mA (board)","conditions":"IOH = 8 mA"}],"vol":[{"max":0.4,"min":0,"src":{"page":7,"quote":"| VOL | Output low voltage, 8 mA | 0 | - | 0.4 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output low voltage @ 8 mA (board)","conditions":"IOL = 8 mA"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO4","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 GPIO4","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO4","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO4","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":10,"quote":"board. The RP2040 runs at 3.3V and has an internal voltage regulator providing 1.1V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO4","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.3,"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Maximum GPIO input voltage"}],"five_volt_tolerant":[{"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 GPIO4","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"JP2-1","attrs":{"kind":"gpio","label":"D13","number":8,"chip_pin":"GPIO6","position":"1","connector":"JP2","designator":"JP2-1","description":"Digital Pin 13","power_domain":"IOVDD"},"sources":[{"page":15,"quote":"| 1 | D13 | Digital | Digital Pin 13 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"}],"attr_src":{"kind":{"page":15,"quote":"| 1 | D13 | Digital | Digital Pin 13 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"label":{"page":15,"quote":"| 1 | D13 | Digital | Digital Pin 13 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"number":{"via":"chip u1 GPIO6","method":"chip_link"},"chip_pin":{"page":15,"quote":"| 1 | D13 | Digital | Digital Pin 13 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"position":{"page":15,"quote":"| 1 | D13 | Digital | Digital Pin 13 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"connector":{"page":15,"quote":"| 1 | D13 | Digital | Digital Pin 13 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"designator":{"page":15,"quote":"| 1 | D13 | Digital | Digital Pin 13 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"description":{"page":15,"quote":"| 1 | D13 | Digital | Digital Pin 13 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"power_domain":{"via":"chip u1 GPIO6","method":"chip_link"}},"chip_pin":{"pin":"GPIO6","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"SCK GPIO06 D13","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"D13","category":"gpio"},{"src":{"page":22,"quote":"SCK GPIO06 D13","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"GPIO6","category":"gpio"},{"src":{"page":22,"quote":"SCK GPIO06 D13","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"PWM","category":"pwm"},{"src":{"page":22,"quote":"SCK GPIO06 D13","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"SPI SCK","category":"spi"},{"alt":"F1","src":{"page":13,"quote":"| 6 | SPI0 SCK | UART1 CTS | I2C1 SDA | PWM3 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO6","signal":"SPI0_SCK","category":"spi","instance":"0","peripheral":"SPI"},{"alt":"F2","src":{"page":13,"quote":"| 6 | SPI0 SCK | UART1 CTS | I2C1 SDA | PWM3 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO6","signal":"UART1_CTS","category":"uart","instance":"1","peripheral":"UART"},{"alt":"F3","src":{"page":13,"quote":"| 6 | SPI0 SCK | UART1 CTS | I2C1 SDA | PWM3 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO6","signal":"I2C1_SDA","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":13,"quote":"| 6 | SPI0 SCK | UART1 CTS | I2C1 SDA | PWM3 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO6","signal":"PWM3_A","category":"pwm","instance":"3","peripheral":"PWM"},{"alt":"F5","src":{"page":13,"quote":"| 6 | SPI0 SCK | UART1 CTS | I2C1 SDA | PWM3 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO6","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":13,"quote":"| 6 | SPI0 SCK | UART1 CTS | I2C1 SDA | PWM3 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO6","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":13,"quote":"| 6 | SPI0 SCK | UART1 CTS | I2C1 SDA | PWM3 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO6","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":13,"quote":"| 6 | SPI0 SCK | UART1 CTS | I2C1 SDA | PWM3 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO6","signal":"USB_OVCUR_DET","category":"usb","instance":null,"peripheral":"USB"}],"electrical":{"ioh":[{"max":0.008,"src":{"page":7,"quote":"| IOH Max | Current at VDD-0.4 V, output set high |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VDD-0.4 V, output high (board)"}],"iol":[{"max":0.008,"src":{"page":7,"quote":"| IOL Max | Current at VSS+0.4 V, output set low |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VSS+0.4 V, output low (board)"}],"vih":[{"max":3.3,"min":2.31,"src":{"page":7,"quote":"| VIH | Input high-level voltage | 2.31 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input high-level voltage (board)"}],"vil":[{"max":0.99,"min":0,"src":{"page":7,"quote":"| VIL | Input low-level voltage | 0 | - | 0.99 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input low-level voltage (board)"}],"voh":[{"max":3.3,"min":2.7,"src":{"page":7,"quote":"| VOH | Output high voltage, 8 mA | 2.7 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output high voltage @ 8 mA (board)","conditions":"IOH = 8 mA"}],"vol":[{"max":0.4,"min":0,"src":{"page":7,"quote":"| VOL | Output low voltage, 8 mA | 0 | - | 0.4 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output low voltage @ 8 mA (board)","conditions":"IOL = 8 mA"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO6","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 GPIO6","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO6","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO6","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":10,"quote":"board. The RP2040 runs at 3.3V and has an internal voltage regulator providing 1.1V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO6","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.3,"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Maximum GPIO input voltage"}],"five_volt_tolerant":[{"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 GPIO6","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"JP2-2","attrs":{"kind":"power_out","label":"3.3V","position":"2","connector":"JP2","designator":"JP2-2","description":"3.3V Power"},"sources":[{"page":15,"quote":"| 2 | 3.3V | Power | 3.3V Power |","method":"table","fragment":"entities_headers.json","table_id":"15_1"}],"attr_src":{"kind":{"page":15,"quote":"| 2 | 3.3V | Power | 3.3V Power |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"label":{"page":15,"quote":"| 2 | 3.3V | Power | 3.3V Power |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"position":{"page":15,"quote":"| 2 | 3.3V | Power | 3.3V Power |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"connector":{"page":15,"quote":"| 2 | 3.3V | Power | 3.3V Power |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"designator":{"page":15,"quote":"| 2 | 3.3V | Power | 3.3V Power |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"description":{"page":15,"quote":"| 2 | 3.3V | Power | 3.3V Power |","method":"table","fragment":"entities_headers.json","table_id":"15_1"}},"functions":[],"electrical":{"output_current":[{"max":0.8,"src":{"page":7,"quote":"| I3V3 | 3.3V output current (including onboard IC) | - | - | 800 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"direct","orig":{"max":800,"unit":"mA"},"unit":"A","category":"operating","parameter":"3.3 V output current incl. onboard ICs"}],"output_voltage":[{"max":3.35,"min":3.25,"src":{"page":7,"quote":"| V3V3 | 3.3V output to user application | 3.25 | 3.3 | 3.35 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"typ":3.3,"via":"direct","unit":"V","category":"operating","parameter":"3.3 V output"}]},"entity_type":"pin"},{"id":"JP2-3","attrs":{"kind":"analog","label":"REF","position":"3","connector":"JP2","designator":"JP2-3","description":"NC"},"sources":[{"page":15,"quote":"| 3 | REF | Analog | NC |","method":"table","fragment":"entities_headers.json","table_id":"15_1"}],"attr_src":{"kind":{"page":15,"quote":"| 3 | REF | Analog | NC |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"label":{"page":15,"quote":"| 3 | REF | Analog | NC |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"position":{"page":15,"quote":"| 3 | REF | Analog | NC |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"connector":{"page":15,"quote":"| 3 | REF | Analog | NC |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"designator":{"page":15,"quote":"| 3 | REF | Analog | NC |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"description":{"page":15,"quote":"| 3 | REF | Analog | NC |","method":"table","fragment":"entities_headers.json","table_id":"15_1"}},"functions":[{"src":{"page":15,"quote":"| 3 | REF | Analog | NC |","method":"table","fragment":"functions_headers.json","table_id":"15_1"},"signal":"AREF (not connected; reference fixed at 3.3 V)","category":"analog"}],"electrical":{},"entity_type":"pin"},{"id":"JP2-4","attrs":{"kind":"gpio","label":"A0","number":38,"chip_pin":"GPIO26","position":"4","connector":"JP2","designator":"JP2-4","description":"Analog Pin 0","power_domain":"IOVDD / ADC_AVDD"},"sources":[{"page":15,"quote":"| 4 | A0 | Analog | Analog Pin 0 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"}],"attr_src":{"kind":{"page":15,"quote":"| 4 | A0 | Analog | Analog Pin 0 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"label":{"page":15,"quote":"| 4 | A0 | Analog | Analog Pin 0 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"number":{"via":"chip u1 GPIO26","method":"chip_link"},"chip_pin":{"page":15,"quote":"| 4 | A0 | Analog | Analog Pin 0 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"position":{"page":15,"quote":"| 4 | A0 | Analog | Analog Pin 0 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"connector":{"page":15,"quote":"| 4 | A0 | Analog | Analog Pin 0 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"designator":{"page":15,"quote":"| 4 | A0 | Analog | Analog Pin 0 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"description":{"page":15,"quote":"| 4 | A0 | Analog | Analog Pin 0 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"power_domain":{"via":"chip u1 GPIO26","method":"chip_link"}},"chip_pin":{"pin":"GPIO26","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"A0 GPIO026 A0 D14","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"A0","category":"adc"},{"src":{"page":22,"quote":"A0 GPIO026 A0 D14","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"GPIO26","category":"gpio"},{"src":{"page":22,"quote":"A0 GPIO026 A0 D14","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"PWM","category":"pwm"},{"alt":"F1","src":{"page":14,"quote":"| 26 | SPI1 SCK | UART1 CTS | I2C1 SDA | PWM5 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO26","signal":"SPI1_SCK","category":"spi","instance":"1","peripheral":"SPI"},{"alt":"F2","src":{"page":14,"quote":"| 26 | SPI1 SCK | UART1 CTS | I2C1 SDA | PWM5 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO26","signal":"UART1_CTS","category":"uart","instance":"1","peripheral":"UART"},{"alt":"F3","src":{"page":14,"quote":"| 26 | SPI1 SCK | UART1 CTS | I2C1 SDA | PWM5 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO26","signal":"I2C1_SDA","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":14,"quote":"| 26 | SPI1 SCK | UART1 CTS | I2C1 SDA | PWM5 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO26","signal":"PWM5_A","category":"pwm","instance":"5","peripheral":"PWM"},{"alt":"F5","src":{"page":14,"quote":"| 26 | SPI1 SCK | UART1 CTS | I2C1 SDA | PWM5 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO26","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":14,"quote":"| 26 | SPI1 SCK | UART1 CTS | I2C1 SDA | PWM5 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO26","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":14,"quote":"| 26 | SPI1 SCK | UART1 CTS | I2C1 SDA | PWM5 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO26","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":14,"quote":"| 26 | SPI1 SCK | UART1 CTS | I2C1 SDA | PWM5 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO26","signal":"USB_VBUS_EN","category":"usb","instance":null,"peripheral":"USB"},{"alt":"analog","src":{"page":14,"quote":"| 26 | SPI1 SCK | UART1 CTS | I2C1 SDA | PWM5 A | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO26","signal":"ADC0","category":"adc","instance":"0","peripheral":"ADC"}],"electrical":{"ioh":[{"max":0.008,"src":{"page":7,"quote":"| IOH Max | Current at VDD-0.4 V, output set high |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VDD-0.4 V, output high (board)"}],"iol":[{"max":0.008,"src":{"page":7,"quote":"| IOL Max | Current at VSS+0.4 V, output set low |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VSS+0.4 V, output low (board)"}],"vih":[{"max":3.3,"min":2.31,"src":{"page":7,"quote":"| VIH | Input high-level voltage | 2.31 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input high-level voltage (board)"}],"vil":[{"max":0.99,"min":0,"src":{"page":7,"quote":"| VIL | Input low-level voltage | 0 | - | 0.99 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input low-level voltage (board)"}],"voh":[{"max":3.3,"min":2.7,"src":{"page":7,"quote":"| VOH | Output high voltage, 8 mA | 2.7 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output high voltage @ 8 mA (board)","conditions":"IOH = 8 mA"}],"vol":[{"max":0.4,"min":0,"src":{"page":7,"quote":"| VOL | Output low voltage, 8 mA | 0 | - | 0.4 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output low voltage @ 8 mA (board)","conditions":"IOL = 8 mA"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO26","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":2000,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Human Body Model | HBM | 2 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"615_4"},"via":"chip u1 GPIO26","orig":{"max":2,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO26","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"adc_enob":[{"min":8.7,"src":{"doc":"RP2040 datasheet","page":618,"quote":"| Effective Number of Bits | ENOB | 8.7 |  | bits | See Section 4.9.3 |","method":"table","fragment":"ratings_pads.json","table_id":"618_1"},"via":"chip u1 GPIO26","symbol":"ENOB","category":"characteristic","parameter":"Effective Number of Bits"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO26","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":10,"quote":"board. The RP2040 runs at 3.3V and has an internal voltage regulator providing 1.1V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO26","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.3,"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Maximum GPIO input voltage"}],"adc_input_range":[{"max":3.3,"min":0,"src":{"doc":"RP2040 datasheet","page":618,"quote":"| ADC Input Voltage Range | VPIN_ADC | 0 | ADC_AVDD | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"618_1"},"via":"chip u1 GPIO26","unit":"V","symbol":"VPIN_ADC","category":"characteristic","parameter":"ADC Input Voltage Range","conditions":"max = ADC_AVDD (3.3 V typ)"}],"five_volt_tolerant":[{"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}],"adc_input_impedance":[{"min":100000,"src":{"doc":"RP2040 datasheet","page":618,"quote":"| ADC Input Impedance | RIN_ADC | 100 |  | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"618_1"},"via":"chip u1 GPIO26","orig":{"min":100,"unit":"kΩ"},"unit":"ohm","symbol":"RIN_ADC","category":"characteristic","parameter":"ADC Input Impedance"}]},"entity_type":"pin"},{"id":"JP2-5","attrs":{"kind":"gpio","label":"A1","number":39,"chip_pin":"GPIO27","position":"5","connector":"JP2","designator":"JP2-5","description":"Analog Pin 1","power_domain":"IOVDD / ADC_AVDD"},"sources":[{"page":15,"quote":"| 5 | A1 | Analog | Analog Pin 1 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"}],"attr_src":{"kind":{"page":15,"quote":"| 5 | A1 | Analog | Analog Pin 1 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"label":{"page":15,"quote":"| 5 | A1 | Analog | Analog Pin 1 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"number":{"via":"chip u1 GPIO27","method":"chip_link"},"chip_pin":{"page":15,"quote":"| 5 | A1 | Analog | Analog Pin 1 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"position":{"page":15,"quote":"| 5 | A1 | Analog | Analog Pin 1 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"connector":{"page":15,"quote":"| 5 | A1 | Analog | Analog Pin 1 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"designator":{"page":15,"quote":"| 5 | A1 | Analog | Analog Pin 1 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"description":{"page":15,"quote":"| 5 | A1 | Analog | Analog Pin 1 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"power_domain":{"via":"chip u1 GPIO27","method":"chip_link"}},"chip_pin":{"pin":"GPIO27","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"A1 GPIO027 A1 D15","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"A1","category":"adc"},{"src":{"page":22,"quote":"A1 GPIO027 A1 D15","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"GPIO27","category":"gpio"},{"src":{"page":22,"quote":"A1 GPIO027 A1 D15","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"PWM","category":"pwm"},{"alt":"F1","src":{"page":14,"quote":"| 27 | SPI1 TX | UART1 RTS | I2C1 SCL | PWM5 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO27","signal":"SPI1_TX","category":"spi","instance":"1","peripheral":"SPI"},{"alt":"F2","src":{"page":14,"quote":"| 27 | SPI1 TX | UART1 RTS | I2C1 SCL | PWM5 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO27","signal":"UART1_RTS","category":"uart","instance":"1","peripheral":"UART"},{"alt":"F3","src":{"page":14,"quote":"| 27 | SPI1 TX | UART1 RTS | I2C1 SCL | PWM5 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO27","signal":"I2C1_SCL","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":14,"quote":"| 27 | SPI1 TX | UART1 RTS | I2C1 SCL | PWM5 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO27","signal":"PWM5_B","category":"pwm","instance":"5","peripheral":"PWM"},{"alt":"F5","src":{"page":14,"quote":"| 27 | SPI1 TX | UART1 RTS | I2C1 SCL | PWM5 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO27","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":14,"quote":"| 27 | SPI1 TX | UART1 RTS | I2C1 SCL | PWM5 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO27","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":14,"quote":"| 27 | SPI1 TX | UART1 RTS | I2C1 SCL | PWM5 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO27","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":14,"quote":"| 27 | SPI1 TX | UART1 RTS | I2C1 SCL | PWM5 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO27","signal":"USB_OVCUR_DET","category":"usb","instance":null,"peripheral":"USB"},{"alt":"analog","src":{"page":14,"quote":"| 27 | SPI1 TX | UART1 RTS | I2C1 SCL | PWM5 B | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO27","signal":"ADC1","category":"adc","instance":"1","peripheral":"ADC"}],"electrical":{"ioh":[{"max":0.008,"src":{"page":7,"quote":"| IOH Max | Current at VDD-0.4 V, output set high |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VDD-0.4 V, output high (board)"}],"iol":[{"max":0.008,"src":{"page":7,"quote":"| IOL Max | Current at VSS+0.4 V, output set low |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VSS+0.4 V, output low (board)"}],"vih":[{"max":3.3,"min":2.31,"src":{"page":7,"quote":"| VIH | Input high-level voltage | 2.31 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input high-level voltage (board)"}],"vil":[{"max":0.99,"min":0,"src":{"page":7,"quote":"| VIL | Input low-level voltage | 0 | - | 0.99 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input low-level voltage (board)"}],"voh":[{"max":3.3,"min":2.7,"src":{"page":7,"quote":"| VOH | Output high voltage, 8 mA | 2.7 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output high voltage @ 8 mA (board)","conditions":"IOH = 8 mA"}],"vol":[{"max":0.4,"min":0,"src":{"page":7,"quote":"| VOL | Output low voltage, 8 mA | 0 | - | 0.4 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output low voltage @ 8 mA (board)","conditions":"IOL = 8 mA"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO27","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":2000,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Human Body Model | HBM | 2 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"615_4"},"via":"chip u1 GPIO27","orig":{"max":2,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO27","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"adc_enob":[{"min":8.7,"src":{"doc":"RP2040 datasheet","page":618,"quote":"| Effective Number of Bits | ENOB | 8.7 |  | bits | See Section 4.9.3 |","method":"table","fragment":"ratings_pads.json","table_id":"618_1"},"via":"chip u1 GPIO27","symbol":"ENOB","category":"characteristic","parameter":"Effective Number of Bits"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO27","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":10,"quote":"board. The RP2040 runs at 3.3V and has an internal voltage regulator providing 1.1V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO27","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.3,"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Maximum GPIO input voltage"}],"adc_input_range":[{"max":3.3,"min":0,"src":{"doc":"RP2040 datasheet","page":618,"quote":"| ADC Input Voltage Range | VPIN_ADC | 0 | ADC_AVDD | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"618_1"},"via":"chip u1 GPIO27","unit":"V","symbol":"VPIN_ADC","category":"characteristic","parameter":"ADC Input Voltage Range","conditions":"max = ADC_AVDD (3.3 V typ)"}],"five_volt_tolerant":[{"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}],"adc_input_impedance":[{"min":100000,"src":{"doc":"RP2040 datasheet","page":618,"quote":"| ADC Input Impedance | RIN_ADC | 100 |  | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"618_1"},"via":"chip u1 GPIO27","orig":{"min":100,"unit":"kΩ"},"unit":"ohm","symbol":"RIN_ADC","category":"characteristic","parameter":"ADC Input Impedance"}]},"entity_type":"pin"},{"id":"JP2-6","attrs":{"kind":"gpio","label":"A2","number":40,"chip_pin":"GPIO28","position":"6","connector":"JP2","designator":"JP2-6","description":"Analog Pin 2","power_domain":"IOVDD / ADC_AVDD"},"sources":[{"page":15,"quote":"| 6 | A2 | Analog | Analog Pin 2 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"}],"attr_src":{"kind":{"page":15,"quote":"| 6 | A2 | Analog | Analog Pin 2 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"label":{"page":15,"quote":"| 6 | A2 | Analog | Analog Pin 2 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"number":{"via":"chip u1 GPIO28","method":"chip_link"},"chip_pin":{"page":15,"quote":"| 6 | A2 | Analog | Analog Pin 2 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"position":{"page":15,"quote":"| 6 | A2 | Analog | Analog Pin 2 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"connector":{"page":15,"quote":"| 6 | A2 | Analog | Analog Pin 2 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"designator":{"page":15,"quote":"| 6 | A2 | Analog | Analog Pin 2 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"description":{"page":15,"quote":"| 6 | A2 | Analog | Analog Pin 2 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"power_domain":{"via":"chip u1 GPIO28","method":"chip_link"}},"chip_pin":{"pin":"GPIO28","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"A2 GPIO028 A2 D16","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"A2","category":"adc"},{"src":{"page":22,"quote":"A2 GPIO028 A2 D16","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"GPIO28","category":"gpio"},{"src":{"page":22,"quote":"A2 GPIO028 A2 D16","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"PWM","category":"pwm"},{"alt":"F1","src":{"page":14,"quote":"| 28 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO28","signal":"SPI1_RX","category":"spi","instance":"1","peripheral":"SPI"},{"alt":"F2","src":{"page":14,"quote":"| 28 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO28","signal":"UART0_TX","category":"uart","instance":"0","peripheral":"UART"},{"alt":"F3","src":{"page":14,"quote":"| 28 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO28","signal":"I2C0_SDA","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":14,"quote":"| 28 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO28","signal":"PWM6_A","category":"pwm","instance":"6","peripheral":"PWM"},{"alt":"F5","src":{"page":14,"quote":"| 28 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO28","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":14,"quote":"| 28 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO28","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":14,"quote":"| 28 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO28","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":14,"quote":"| 28 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO28","signal":"USB_VBUS_DET","category":"usb","instance":null,"peripheral":"USB"},{"alt":"analog","src":{"page":14,"quote":"| 28 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO28","signal":"ADC2","category":"adc","instance":"2","peripheral":"ADC"}],"electrical":{"ioh":[{"max":0.008,"src":{"page":7,"quote":"| IOH Max | Current at VDD-0.4 V, output set high |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VDD-0.4 V, output high (board)"}],"iol":[{"max":0.008,"src":{"page":7,"quote":"| IOL Max | Current at VSS+0.4 V, output set low |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VSS+0.4 V, output low (board)"}],"vih":[{"max":3.3,"min":2.31,"src":{"page":7,"quote":"| VIH | Input high-level voltage | 2.31 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input high-level voltage (board)"}],"vil":[{"max":0.99,"min":0,"src":{"page":7,"quote":"| VIL | Input low-level voltage | 0 | - | 0.99 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input low-level voltage (board)"}],"voh":[{"max":3.3,"min":2.7,"src":{"page":7,"quote":"| VOH | Output high voltage, 8 mA | 2.7 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output high voltage @ 8 mA (board)","conditions":"IOH = 8 mA"}],"vol":[{"max":0.4,"min":0,"src":{"page":7,"quote":"| VOL | Output low voltage, 8 mA | 0 | - | 0.4 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output low voltage @ 8 mA (board)","conditions":"IOL = 8 mA"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO28","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":2000,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Human Body Model | HBM | 2 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"615_4"},"via":"chip u1 GPIO28","orig":{"max":2,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO28","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"adc_enob":[{"min":8.7,"src":{"doc":"RP2040 datasheet","page":618,"quote":"| Effective Number of Bits | ENOB | 8.7 |  | bits | See Section 4.9.3 |","method":"table","fragment":"ratings_pads.json","table_id":"618_1"},"via":"chip u1 GPIO28","symbol":"ENOB","category":"characteristic","parameter":"Effective Number of Bits"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO28","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":10,"quote":"board. The RP2040 runs at 3.3V and has an internal voltage regulator providing 1.1V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO28","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.3,"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Maximum GPIO input voltage"}],"adc_input_range":[{"max":3.3,"min":0,"src":{"doc":"RP2040 datasheet","page":618,"quote":"| ADC Input Voltage Range | VPIN_ADC | 0 | ADC_AVDD | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"618_1"},"via":"chip u1 GPIO28","unit":"V","symbol":"VPIN_ADC","category":"characteristic","parameter":"ADC Input Voltage Range","conditions":"max = ADC_AVDD (3.3 V typ)"}],"five_volt_tolerant":[{"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}],"adc_input_impedance":[{"min":100000,"src":{"doc":"RP2040 datasheet","page":618,"quote":"| ADC Input Impedance | RIN_ADC | 100 |  | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"618_1"},"via":"chip u1 GPIO28","orig":{"min":100,"unit":"kΩ"},"unit":"ohm","symbol":"RIN_ADC","category":"characteristic","parameter":"ADC Input Impedance"}]},"entity_type":"pin"},{"id":"JP2-7","attrs":{"kind":"gpio","label":"A3","number":41,"chip_pin":"GPIO29","position":"7","connector":"JP2","designator":"JP2-7","description":"Analog Pin 3","power_domain":"IOVDD / ADC_AVDD"},"sources":[{"page":15,"quote":"| 7 | A3 | Analog | Analog Pin 3 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"}],"attr_src":{"kind":{"page":15,"quote":"| 7 | A3 | Analog | Analog Pin 3 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"label":{"page":15,"quote":"| 7 | A3 | Analog | Analog Pin 3 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"number":{"via":"chip u1 GPIO29","method":"chip_link"},"chip_pin":{"page":15,"quote":"| 7 | A3 | Analog | Analog Pin 3 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"position":{"page":15,"quote":"| 7 | A3 | Analog | Analog Pin 3 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"connector":{"page":15,"quote":"| 7 | A3 | Analog | Analog Pin 3 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"designator":{"page":15,"quote":"| 7 | A3 | Analog | Analog Pin 3 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"description":{"page":15,"quote":"| 7 | A3 | Analog | Analog Pin 3 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"power_domain":{"via":"chip u1 GPIO29","method":"chip_link"}},"chip_pin":{"pin":"GPIO29","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"A3 GPIO029 A3 D17","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"A3","category":"adc"},{"src":{"page":22,"quote":"A3 GPIO029 A3 D17","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"GPIO29","category":"gpio"},{"src":{"page":22,"quote":"A3 GPIO029 A3 D17","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"PWM","category":"pwm"},{"alt":"F1","src":{"page":14,"quote":"| 29 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO29","signal":"SPI1_CSn","category":"spi","instance":"1","peripheral":"SPI"},{"alt":"F2","src":{"page":14,"quote":"| 29 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO29","signal":"UART0_RX","category":"uart","instance":"0","peripheral":"UART"},{"alt":"F3","src":{"page":14,"quote":"| 29 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO29","signal":"I2C0_SCL","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":14,"quote":"| 29 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO29","signal":"PWM6_B","category":"pwm","instance":"6","peripheral":"PWM"},{"alt":"F5","src":{"page":14,"quote":"| 29 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO29","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":14,"quote":"| 29 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO29","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":14,"quote":"| 29 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO29","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":14,"quote":"| 29 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO29","signal":"USB_VBUS_EN","category":"usb","instance":null,"peripheral":"USB"},{"alt":"analog","src":{"page":14,"quote":"| 29 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS EN |","method":"table","fragment":"functions_gpio_select.json","table_id":"14_1"},"via":"chip u1 GPIO29","signal":"ADC3","category":"adc","instance":"3","peripheral":"ADC"}],"electrical":{"ioh":[{"max":0.008,"src":{"page":7,"quote":"| IOH Max | Current at VDD-0.4 V, output set high |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VDD-0.4 V, output high (board)"}],"iol":[{"max":0.008,"src":{"page":7,"quote":"| IOL Max | Current at VSS+0.4 V, output set low |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VSS+0.4 V, output low (board)"}],"vih":[{"max":3.3,"min":2.31,"src":{"page":7,"quote":"| VIH | Input high-level voltage | 2.31 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input high-level voltage (board)"}],"vil":[{"max":0.99,"min":0,"src":{"page":7,"quote":"| VIL | Input low-level voltage | 0 | - | 0.99 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input low-level voltage (board)"}],"voh":[{"max":3.3,"min":2.7,"src":{"page":7,"quote":"| VOH | Output high voltage, 8 mA | 2.7 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output high voltage @ 8 mA (board)","conditions":"IOH = 8 mA"}],"vol":[{"max":0.4,"min":0,"src":{"page":7,"quote":"| VOL | Output low voltage, 8 mA | 0 | - | 0.4 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output low voltage @ 8 mA (board)","conditions":"IOL = 8 mA"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO29","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":2000,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Human Body Model | HBM | 2 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"615_4"},"via":"chip u1 GPIO29","orig":{"max":2,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO29","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"adc_enob":[{"min":8.7,"src":{"doc":"RP2040 datasheet","page":618,"quote":"| Effective Number of Bits | ENOB | 8.7 |  | bits | See Section 4.9.3 |","method":"table","fragment":"ratings_pads.json","table_id":"618_1"},"via":"chip u1 GPIO29","symbol":"ENOB","category":"characteristic","parameter":"Effective Number of Bits"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO29","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":10,"quote":"board. The RP2040 runs at 3.3V and has an internal voltage regulator providing 1.1V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO29","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.3,"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Maximum GPIO input voltage"}],"adc_input_range":[{"max":3.3,"min":0,"src":{"doc":"RP2040 datasheet","page":618,"quote":"| ADC Input Voltage Range | VPIN_ADC | 0 | ADC_AVDD | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"618_1"},"via":"chip u1 GPIO29","unit":"V","symbol":"VPIN_ADC","category":"characteristic","parameter":"ADC Input Voltage Range","conditions":"max = ADC_AVDD (3.3 V typ)"}],"five_volt_tolerant":[{"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}],"adc_input_impedance":[{"min":100000,"src":{"doc":"RP2040 datasheet","page":618,"quote":"| ADC Input Impedance | RIN_ADC | 100 |  | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"618_1"},"via":"chip u1 GPIO29","orig":{"min":100,"unit":"kΩ"},"unit":"ohm","symbol":"RIN_ADC","category":"characteristic","parameter":"ADC Input Impedance"}]},"entity_type":"pin"},{"id":"JP2-8","attrs":{"kind":"gpio","label":"A4","number":15,"chip_pin":"GPIO12","position":"8","connector":"JP2","designator":"JP2-8","description":"Analog Pin 4","power_domain":"IOVDD"},"sources":[{"page":15,"quote":"| 8 | A4 | Analog | Analog Pin 4 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"}],"attr_src":{"kind":{"page":15,"quote":"| 8 | A4 | Analog | Analog Pin 4 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"label":{"page":15,"quote":"| 8 | A4 | Analog | Analog Pin 4 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"number":{"via":"chip u1 GPIO12","method":"chip_link"},"chip_pin":{"page":15,"quote":"| 8 | A4 | Analog | Analog Pin 4 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"position":{"page":15,"quote":"| 8 | A4 | Analog | Analog Pin 4 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"connector":{"page":15,"quote":"| 8 | A4 | Analog | Analog Pin 4 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"designator":{"page":15,"quote":"| 8 | A4 | Analog | Analog Pin 4 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"description":{"page":15,"quote":"| 8 | A4 | Analog | Analog Pin 4 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"power_domain":{"via":"chip u1 GPIO12","method":"chip_link"}},"chip_pin":{"pin":"GPIO12","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"ADC2 /GPIO34 … A4/SDA GPIO012 A4 D18","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"A4","category":"adc"},{"src":{"page":22,"quote":"ADC2 /GPIO34 … A4/SDA GPIO012 A4 D18","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"GPIO12","category":"gpio"},{"src":{"page":22,"quote":"ADC2 /GPIO34 … A4/SDA GPIO012 A4 D18","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"PWM","category":"pwm"},{"src":{"page":22,"quote":"ADC2 /GPIO34 … A4/SDA GPIO012 A4 D18","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"I2C SDA (4.7 kΩ pull-up; shared with onboard IMU/crypto)","category":"i2c"},{"src":{"page":22,"quote":"ADC2 /GPIO34 … A4/SDA GPIO012 A4 D18","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"NINA-W102 ADC2 / ESP32 GPIO34","category":"adc"},{"alt":"F1","src":{"page":13,"quote":"| 12 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO12","signal":"SPI1_RX","category":"spi","instance":"1","peripheral":"SPI"},{"alt":"F2","src":{"page":13,"quote":"| 12 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO12","signal":"UART0_TX","category":"uart","instance":"0","peripheral":"UART"},{"alt":"F3","src":{"page":13,"quote":"| 12 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO12","signal":"I2C0_SDA","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":13,"quote":"| 12 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO12","signal":"PWM6_A","category":"pwm","instance":"6","peripheral":"PWM"},{"alt":"F5","src":{"page":13,"quote":"| 12 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO12","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":13,"quote":"| 12 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO12","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":13,"quote":"| 12 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO12","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":13,"quote":"| 12 | SPI1 RX | UART0 TX | I2C0 SDA | PWM6 A | SIO | PIO0 | PIO1 |  | USB OVCUR DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO12","signal":"USB_OVCUR_DET","category":"usb","instance":null,"peripheral":"USB"}],"electrical":{"ioh":[{"max":0.008,"src":{"page":7,"quote":"| IOH Max | Current at VDD-0.4 V, output set high |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VDD-0.4 V, output high (board)"}],"iol":[{"max":0.008,"src":{"page":7,"quote":"| IOL Max | Current at VSS+0.4 V, output set low |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VSS+0.4 V, output low (board)"}],"vih":[{"max":3.3,"min":2.31,"src":{"page":7,"quote":"| VIH | Input high-level voltage | 2.31 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input high-level voltage (board)"}],"vil":[{"max":0.99,"min":0,"src":{"page":7,"quote":"| VIL | Input low-level voltage | 0 | - | 0.99 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input low-level voltage (board)"}],"voh":[{"max":3.3,"min":2.7,"src":{"page":7,"quote":"| VOH | Output high voltage, 8 mA | 2.7 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output high voltage @ 8 mA (board)","conditions":"IOH = 8 mA"}],"vol":[{"max":0.4,"min":0,"src":{"page":7,"quote":"| VOL | Output low voltage, 8 mA | 0 | - | 0.4 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output low voltage @ 8 mA (board)","conditions":"IOL = 8 mA"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO12","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 GPIO12","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"src":{"page":15,"quote":"A4 and A5 are shared with the I2C bus of the RP2040 and are each pulled up with 4.7 KΩ resistors.","method":"text","fragment":"ratings_board.json"},"via":"direct","value":"4.7 kΩ to 3.3 V","category":"characteristic","parameter":"I2C pull-ups on A4/A5"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO12","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":10,"quote":"board. The RP2040 runs at 3.3V and has an internal voltage regulator providing 1.1V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO12","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.3,"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Maximum GPIO input voltage"}],"five_volt_tolerant":[{"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 GPIO12","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"JP2-9","attrs":{"kind":"gpio","label":"A5","number":16,"chip_pin":"GPIO13","position":"9","connector":"JP2","designator":"JP2-9","description":"Analog Pin 5","power_domain":"IOVDD"},"sources":[{"page":15,"quote":"| 9 | A5 | Analog | Analog Pin 5 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"}],"attr_src":{"kind":{"page":15,"quote":"| 9 | A5 | Analog | Analog Pin 5 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"label":{"page":15,"quote":"| 9 | A5 | Analog | Analog Pin 5 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"number":{"via":"chip u1 GPIO13","method":"chip_link"},"chip_pin":{"page":15,"quote":"| 9 | A5 | Analog | Analog Pin 5 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"position":{"page":15,"quote":"| 9 | A5 | Analog | Analog Pin 5 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"connector":{"page":15,"quote":"| 9 | A5 | Analog | Analog Pin 5 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"designator":{"page":15,"quote":"| 9 | A5 | Analog | Analog Pin 5 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"description":{"page":15,"quote":"| 9 | A5 | Analog | Analog Pin 5 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"power_domain":{"via":"chip u1 GPIO13","method":"chip_link"}},"chip_pin":{"pin":"GPIO13","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"ADC3 /GPIO39 … A5/SCL GPIO013 A5 D19","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"A5","category":"adc"},{"src":{"page":22,"quote":"ADC3 /GPIO39 … A5/SCL GPIO013 A5 D19","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"GPIO13","category":"gpio"},{"src":{"page":22,"quote":"ADC3 /GPIO39 … A5/SCL GPIO013 A5 D19","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"PWM","category":"pwm"},{"src":{"page":22,"quote":"ADC3 /GPIO39 … A5/SCL GPIO013 A5 D19","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"I2C SCL (4.7 kΩ pull-up; shared with onboard IMU/crypto)","category":"i2c"},{"src":{"page":22,"quote":"ADC3 /GPIO39 … A5/SCL GPIO013 A5 D19","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"NINA-W102 ADC3 / ESP32 GPIO39","category":"adc"},{"alt":"F1","src":{"page":13,"quote":"| 13 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO13","signal":"SPI1_CSn","category":"spi","instance":"1","peripheral":"SPI"},{"alt":"F2","src":{"page":13,"quote":"| 13 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO13","signal":"UART0_RX","category":"uart","instance":"0","peripheral":"UART"},{"alt":"F3","src":{"page":13,"quote":"| 13 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO13","signal":"I2C0_SCL","category":"other","instance":"2","peripheral":"I"},{"alt":"F4","src":{"page":13,"quote":"| 13 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO13","signal":"PWM6_B","category":"pwm","instance":"6","peripheral":"PWM"},{"alt":"F5","src":{"page":13,"quote":"| 13 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO13","signal":"SIO","category":"gpio","instance":null,"peripheral":"SIO"},{"alt":"F6","src":{"page":13,"quote":"| 13 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO13","signal":"PIO0","category":"pio","instance":"0","peripheral":"PIO"},{"alt":"F7","src":{"page":13,"quote":"| 13 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO13","signal":"PIO1","category":"pio","instance":"1","peripheral":"PIO"},{"alt":"F9","src":{"page":13,"quote":"| 13 | SPI1 CSn | UART0 RX | I2C0 SCL | PWM6 B | SIO | PIO0 | PIO1 |  | USB VBUS DET |","method":"table","fragment":"functions_gpio_select.json","table_id":"13_2"},"via":"chip u1 GPIO13","signal":"USB_VBUS_DET","category":"usb","instance":null,"peripheral":"USB"}],"electrical":{"ioh":[{"max":0.008,"src":{"page":7,"quote":"| IOH Max | Current at VDD-0.4 V, output set high |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VDD-0.4 V, output high (board)"}],"iol":[{"max":0.008,"src":{"page":7,"quote":"| IOL Max | Current at VSS+0.4 V, output set low |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VSS+0.4 V, output low (board)"}],"vih":[{"max":3.3,"min":2.31,"src":{"page":7,"quote":"| VIH | Input high-level voltage | 2.31 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input high-level voltage (board)"}],"vil":[{"max":0.99,"min":0,"src":{"page":7,"quote":"| VIL | Input low-level voltage | 0 | - | 0.99 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input low-level voltage (board)"}],"voh":[{"max":3.3,"min":2.7,"src":{"page":7,"quote":"| VOH | Output high voltage, 8 mA | 2.7 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output high voltage @ 8 mA (board)","conditions":"IOH = 8 mA"}],"vol":[{"max":0.4,"min":0,"src":{"page":7,"quote":"| VOL | Output low voltage, 8 mA | 0 | - | 0.4 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output low voltage @ 8 mA (board)","conditions":"IOL = 8 mA"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO13","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 GPIO13","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"src":{"page":15,"quote":"A4 and A5 are shared with the I2C bus of the RP2040 and are each pulled up with 4.7 KΩ resistors.","method":"text","fragment":"ratings_board.json"},"via":"direct","value":"4.7 kΩ to 3.3 V","category":"characteristic","parameter":"I2C pull-ups on A4/A5"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 GPIO13","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"io_voltage":[{"src":{"page":10,"quote":"board. The RP2040 runs at 3.3V and has an internal voltage regulator providing 1.1V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 GPIO13","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.3,"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Maximum GPIO input voltage"}],"five_volt_tolerant":[{"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 GPIO13","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"JP2-10","attrs":{"kind":"gpio","label":"A6","number":5,"nina_pin":"GPIO36","position":"10","connector":"JP2","designator":"JP2-10","description":"Analog Pin 6 — routed to the NINA-W102 (ESP32), 3.3 V, input only","power_domain":"VDD3P3_RTC"},"sources":[{"page":15,"quote":"| 10 | A6 | Analog | Analog Pin 6 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"}],"attr_src":{"kind":{"page":15,"quote":"| 10 | A6 | Analog | Analog Pin 6 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"label":{"page":15,"quote":"| 10 | A6 | Analog | Analog Pin 6 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"number":{"via":"chip m1 GPIO36","method":"chip_link"},"nina_pin":{"page":15,"quote":"| 10 | A6 | Analog | Analog Pin 6 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"position":{"page":15,"quote":"| 10 | A6 | Analog | Analog Pin 6 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"connector":{"page":15,"quote":"| 10 | A6 | Analog | Analog Pin 6 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"designator":{"page":15,"quote":"| 10 | A6 | Analog | Analog Pin 6 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"description":{"page":15,"quote":"| 10 | A6 | Analog | Analog Pin 6 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"power_domain":{"via":"chip m1 GPIO36","method":"chip_link"}},"chip_pin":{"pin":"GPIO36","method":"rule","chip_id":"m1"},"functions":[{"src":{"page":22,"quote":"ADC4 /GPIO36 … A6 A6 D20","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"A6","category":"adc"},{"src":{"page":22,"quote":"ADC4 /GPIO36 … A6 A6 D20","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"NINA-W102 ADC (ESP32 GPIO36, input-only)","category":"adc"},{"src":{"page":14,"quote":"| SENSOR_VP | 5 | I | GPIO36, ADC1_CH0, RTC_GPIO0 |","method":"table","fragment":"functions_pinoverview.json","table_id":"14_1"},"via":"chip m1 GPIO36","signal":"GPIO36","category":"gpio"},{"src":{"page":14,"quote":"| SENSOR_VP | 5 | I | GPIO36, ADC1_CH0, RTC_GPIO0 |","method":"table","fragment":"functions_pinoverview.json","table_id":"14_1"},"via":"chip m1 GPIO36","signal":"ADC1_CH0","category":"adc"},{"src":{"page":14,"quote":"| SENSOR_VP | 5 | I | GPIO36, ADC1_CH0, RTC_GPIO0 |","method":"table","fragment":"functions_pinoverview.json","table_id":"14_1"},"via":"chip m1 GPIO36","signal":"RTC_GPIO0","category":"rtc_gpio"}],"electrical":{"ioh":[{"max":0.008,"src":{"page":7,"quote":"| IOH Max | Current at VDD-0.4 V, output set high |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VDD-0.4 V, output high (board)"}],"iol":[{"max":0.008,"src":{"page":7,"quote":"| IOL Max | Current at VSS+0.4 V, output set low |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VSS+0.4 V, output low (board)"}],"vih":[{"max":3.3,"min":2.31,"src":{"page":7,"quote":"| VIH | Input high-level voltage | 2.31 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input high-level voltage (board)"}],"vil":[{"max":0.99,"min":0,"src":{"page":7,"quote":"| VIL | Input low-level voltage | 0 | - | 0.99 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input low-level voltage (board)"}],"voh":[{"max":3.3,"min":2.7,"src":{"page":7,"quote":"| VOH | Output high voltage, 8 mA | 2.7 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output high voltage @ 8 mA (board)","conditions":"IOH = 8 mA"}],"vol":[{"max":0.4,"min":0,"src":{"page":7,"quote":"| VOL | Output low voltage, 8 mA | 0 | - | 0.4 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output low voltage @ 8 mA (board)","conditions":"IOL = 8 mA"}],"pull_up":[{"src":{"doc":"ESP32-D0WD-V3 datasheet","page":17,"quote":"• GPIO – Input only pins, output is not supported due to lack of pull-up/pull-down resistors.","method":"text","fragment":"ratings_pins.json"},"via":"chip m1 GPIO36","value":"none (GPIO34–39 have no internal pull-up/pull-down)","category":"characteristic","parameter":"Input-only pin","conditions":"VDD=3.3V; 25 °C"}],"pull_down":[{"src":{"doc":"ESP32-D0WD-V3 datasheet","page":17,"quote":"• GPIO – Input only pins, output is not supported due to lack of pull-up/pull-down resistors.","method":"text","fragment":"ratings_pins.json"},"via":"chip m1 GPIO36","value":"none (GPIO34–39 have no internal pull-up/pull-down)","category":"characteristic","parameter":"Input-only pin","conditions":"VDD=3.3V; 25 °C"}],"io_voltage":[{"src":{"page":10,"quote":"board. The RP2040 runs at 3.3V and has an internal voltage regulator providing 1.1V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":5e-8,"src":{"doc":"ESP32-D0WD-V3 datasheet","page":52,"quote":"| IIH | High-level input current |  | — | — | 50 | nA |","method":"table","fragment":"ratings_pins.json","table_id":"52_1"},"via":"chip m1 GPIO36","orig":{"max":50,"unit":"nA"},"unit":"A","category":"characteristic","parameter":"High-level input current","conditions":"VDD=3.3V; 25 °C"}],"abs_max_voltage":[{"max":3.3,"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Maximum GPIO input voltage"}],"input_capacitance":[{"src":{"doc":"ESP32-D0WD-V3 datasheet","page":52,"quote":"| CIN | Pin capacitance |  | — | 2 | — | pF |","method":"table","fragment":"ratings_pins.json","table_id":"52_1"},"typ":0,"via":"chip m1 GPIO36","orig":{"typ":2,"unit":"pF"},"unit":"F","category":"characteristic","parameter":"Pin capacitance","conditions":"VDD=3.3V; 25 °C"}],"five_volt_tolerant":[{"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"JP2-11","attrs":{"kind":"gpio","label":"A7","number":11,"nina_pin":"GPIO35","position":"11","connector":"JP2","designator":"JP2-11","description":"Analog Pin 7 — routed to the NINA-W102 (ESP32), 3.3 V, input only","power_domain":"VDD3P3_RTC"},"sources":[{"page":15,"quote":"| 11 | A7 | Analog | Analog Pin 7 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"}],"attr_src":{"kind":{"page":15,"quote":"| 11 | A7 | Analog | Analog Pin 7 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"label":{"page":15,"quote":"| 11 | A7 | Analog | Analog Pin 7 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"number":{"via":"chip m1 GPIO35","method":"chip_link"},"nina_pin":{"page":15,"quote":"| 11 | A7 | Analog | Analog Pin 7 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"position":{"page":15,"quote":"| 11 | A7 | Analog | Analog Pin 7 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"connector":{"page":15,"quote":"| 11 | A7 | Analog | Analog Pin 7 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"designator":{"page":15,"quote":"| 11 | A7 | Analog | Analog Pin 7 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"description":{"page":15,"quote":"| 11 | A7 | Analog | Analog Pin 7 |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"power_domain":{"via":"chip m1 GPIO35","method":"chip_link"}},"chip_pin":{"pin":"GPIO35","method":"rule","chip_id":"m1"},"functions":[{"src":{"page":22,"quote":"ADC34/GPIO35 … A7 A7 D21","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"A7","category":"adc"},{"src":{"page":22,"quote":"ADC34/GPIO35 … A7 A7 D21","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"NINA-W102 ADC (ESP32 GPIO35, input-only)","category":"adc"},{"src":{"page":14,"quote":"| VDET_2 | 11 | I | GPIO35, ADC1_CH7, RTC_GPIO5 |","method":"table","fragment":"functions_pinoverview.json","table_id":"14_1"},"via":"chip m1 GPIO35","signal":"GPIO35","category":"gpio"},{"src":{"page":14,"quote":"| VDET_2 | 11 | I | GPIO35, ADC1_CH7, RTC_GPIO5 |","method":"table","fragment":"functions_pinoverview.json","table_id":"14_1"},"via":"chip m1 GPIO35","signal":"ADC1_CH7","category":"adc"},{"src":{"page":14,"quote":"| VDET_2 | 11 | I | GPIO35, ADC1_CH7, RTC_GPIO5 |","method":"table","fragment":"functions_pinoverview.json","table_id":"14_1"},"via":"chip m1 GPIO35","signal":"RTC_GPIO5","category":"rtc_gpio"}],"electrical":{"ioh":[{"max":0.008,"src":{"page":7,"quote":"| IOH Max | Current at VDD-0.4 V, output set high |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VDD-0.4 V, output high (board)"}],"iol":[{"max":0.008,"src":{"page":7,"quote":"| IOL Max | Current at VSS+0.4 V, output set low |  |  | 8 | mA |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","orig":{"max":8,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Current at VSS+0.4 V, output low (board)"}],"vih":[{"max":3.3,"min":2.31,"src":{"page":7,"quote":"| VIH | Input high-level voltage | 2.31 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input high-level voltage (board)"}],"vil":[{"max":0.99,"min":0,"src":{"page":7,"quote":"| VIL | Input low-level voltage | 0 | - | 0.99 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Input low-level voltage (board)"}],"voh":[{"max":3.3,"min":2.7,"src":{"page":7,"quote":"| VOH | Output high voltage, 8 mA | 2.7 | - | 3.3 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output high voltage @ 8 mA (board)","conditions":"IOH = 8 mA"}],"vol":[{"max":0.4,"min":0,"src":{"page":7,"quote":"| VOL | Output low voltage, 8 mA | 0 | - | 0.4 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"via":"group:io","unit":"V","category":"characteristic","parameter":"Output low voltage @ 8 mA (board)","conditions":"IOL = 8 mA"}],"pull_up":[{"src":{"doc":"ESP32-D0WD-V3 datasheet","page":17,"quote":"• GPIO – Input only pins, output is not supported due to lack of pull-up/pull-down resistors.","method":"text","fragment":"ratings_pins.json"},"via":"chip m1 GPIO35","value":"none (GPIO34–39 have no internal pull-up/pull-down)","category":"characteristic","parameter":"Input-only pin","conditions":"VDD=3.3V; 25 °C"}],"pull_down":[{"src":{"doc":"ESP32-D0WD-V3 datasheet","page":17,"quote":"• GPIO – Input only pins, output is not supported due to lack of pull-up/pull-down resistors.","method":"text","fragment":"ratings_pins.json"},"via":"chip m1 GPIO35","value":"none (GPIO34–39 have no internal pull-up/pull-down)","category":"characteristic","parameter":"Input-only pin","conditions":"VDD=3.3V; 25 °C"}],"io_voltage":[{"src":{"page":10,"quote":"board. The RP2040 runs at 3.3V and has an internal voltage regulator providing 1.1V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":5e-8,"src":{"doc":"ESP32-D0WD-V3 datasheet","page":52,"quote":"| IIH | High-level input current |  | — | — | 50 | nA |","method":"table","fragment":"ratings_pins.json","table_id":"52_1"},"via":"chip m1 GPIO35","orig":{"max":50,"unit":"nA"},"unit":"A","category":"characteristic","parameter":"High-level input current","conditions":"VDD=3.3V; 25 °C"}],"abs_max_voltage":[{"max":3.3,"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Maximum GPIO input voltage"}],"input_capacitance":[{"src":{"doc":"ESP32-D0WD-V3 datasheet","page":52,"quote":"| CIN | Pin capacitance |  | — | 2 | — | pF |","method":"table","fragment":"ratings_pins.json","table_id":"52_1"},"typ":0,"via":"chip m1 GPIO35","orig":{"typ":2,"unit":"pF"},"unit":"F","category":"characteristic","parameter":"Pin capacitance","conditions":"VDD=3.3V; 25 °C"}],"five_volt_tolerant":[{"src":{"page":20,"quote":"MAXIMUM GPIO input voltage is 3.3V","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"JP2-12","attrs":{"kind":"power_out","label":"VUSB","position":"12","connector":"JP2","designator":"JP2-12","description":"USB Input Voltage"},"sources":[{"page":15,"quote":"| 12 | VUSB | Power | USB Input Voltage |","method":"table","fragment":"entities_headers.json","table_id":"15_1"}],"attr_src":{"kind":{"page":15,"quote":"| 12 | VUSB | Power | USB Input Voltage |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"label":{"page":15,"quote":"| 12 | VUSB | Power | USB Input Voltage |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"position":{"page":15,"quote":"| 12 | VUSB | Power | USB Input Voltage |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"connector":{"page":15,"quote":"| 12 | VUSB | Power | USB Input Voltage |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"designator":{"page":15,"quote":"| 12 | VUSB | Power | USB Input Voltage |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"description":{"page":15,"quote":"| 12 | VUSB | Power | USB Input Voltage |","method":"table","fragment":"entities_headers.json","table_id":"15_1"}},"functions":[],"electrical":{},"entity_type":"pin"},{"id":"JP2-13","attrs":{"kind":"control","label":"REC","number":56,"chip_pin":"QSPI_CSn","position":"13","connector":"JP2","designator":"JP2-13","description":"BOOTSEL","power_domain":"IOVDD"},"sources":[{"page":15,"quote":"| 13 | REC | Digital | BOOTSEL |","method":"table","fragment":"entities_headers.json","table_id":"15_1"}],"attr_src":{"kind":{"page":15,"quote":"| 13 | REC | Digital | BOOTSEL |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"label":{"page":15,"quote":"| 13 | REC | Digital | BOOTSEL |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"number":{"via":"chip u1 QSPI_CSn","method":"chip_link"},"chip_pin":{"page":15,"quote":"| 13 | REC | Digital | BOOTSEL |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"position":{"page":15,"quote":"| 13 | REC | Digital | BOOTSEL |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"connector":{"page":15,"quote":"| 13 | REC | Digital | BOOTSEL |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"designator":{"page":15,"quote":"| 13 | REC | Digital | BOOTSEL |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"description":{"page":15,"quote":"| 13 | REC | Digital | BOOTSEL |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"power_domain":{"via":"chip u1 QSPI_CSn","method":"chip_link"}},"chip_pin":{"pin":"QSPI_CSn","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"SPIV_HD/RMII_TXEN/GPIO21 … QSPI_CSn REC","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"REC","category":"control"},{"src":{"page":22,"quote":"SPIV_HD/RMII_TXEN/GPIO21 … QSPI_CSn REC","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"functions_headers.json"},"signal":"BOOTSEL (QSPI_CSn; NINA GPIO21)","category":"control"}],"electrical":{"ioh":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOH = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 QSPI_CSn","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"Output source current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"iol":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOL = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 QSPI_CSn","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Output sink current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"vih":[{"max":3.6,"min":2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage High @ IOVDD=3.3V | VIH | 2 | IOVDD + 0.3 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 QSPI_CSn","unit":"V","symbol":"VIH","category":"characteristic","parameter":"Input Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD + 0.3"}],"vil":[{"max":0.8,"min":-0.3,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage Low @ IOVDD=3.3V | VIL | -0.3 | 0.8 | V |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 QSPI_CSn","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Input Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V"}],"voh":[{"max":3.3,"min":2.62,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage High @ IOVDD=3.3V | VOH | 2.62 | IOVDD | V | IOH = 2, 4, 8 or 12mA depending on setting |","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 QSPI_CSn","unit":"V","symbol":"VOH","category":"characteristic","parameter":"Output Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting"}],"vol":[{"max":0.5,"min":0,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage Low @ IOVDD=3.3V | VOL | 0 | 0.5 | V | IOL = 2, 4, 8 or 12mA depending on setting |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 QSPI_CSn","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Output Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 QSPI_CSn","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 QSPI_CSn","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 QSPI_CSn","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 QSPI_CSn","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.8,"min":-0.5,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 QSPI_CSn","unit":"V","symbol":"VPIN","category":"absolute_max","parameter":"Voltage at IO (absolute maximum)","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V)"}],"five_volt_tolerant":[{"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |; very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 QSPI_CSn","value":false,"symbol":"","category":"absolute_max","parameter":"5 V tolerant","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"JP2-14","attrs":{"kind":"ground","label":"GND","position":"14","connector":"JP2","designator":"JP2-14","description":"Ground"},"sources":[{"page":15,"quote":"| 14 | GND | Power | Ground |","method":"table","fragment":"entities_headers.json","table_id":"15_1"}],"attr_src":{"kind":{"page":15,"quote":"| 14 | GND | Power | Ground |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"label":{"page":15,"quote":"| 14 | GND | Power | Ground |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"position":{"page":15,"quote":"| 14 | GND | Power | Ground |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"connector":{"page":15,"quote":"| 14 | GND | Power | Ground |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"designator":{"page":15,"quote":"| 14 | GND | Power | Ground |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"description":{"page":15,"quote":"| 14 | GND | Power | Ground |","method":"table","fragment":"entities_headers.json","table_id":"15_1"}},"functions":[],"electrical":{},"entity_type":"pin"},{"id":"JP2-15","attrs":{"kind":"power_in","label":"VIN","position":"15","connector":"JP2","designator":"JP2-15","description":"Voltage Input"},"sources":[{"page":15,"quote":"| 15 | VIN | Power | Voltage Input |","method":"table","fragment":"entities_headers.json","table_id":"15_1"}],"attr_src":{"kind":{"page":15,"quote":"| 15 | VIN | Power | Voltage Input |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"label":{"page":15,"quote":"| 15 | VIN | Power | Voltage Input |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"position":{"page":15,"quote":"| 15 | VIN | Power | Voltage Input |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"connector":{"page":15,"quote":"| 15 | VIN | Power | Voltage Input |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"designator":{"page":15,"quote":"| 15 | VIN | Power | Voltage Input |","method":"table","fragment":"entities_headers.json","table_id":"15_1"},"description":{"page":15,"quote":"| 15 | VIN | Power | Voltage Input |","method":"table","fragment":"entities_headers.json","table_id":"15_1"}},"functions":[],"electrical":{"input_voltage":[{"max":20,"min":4,"src":{"page":7,"quote":"| VIN | Input voltage from VIN pad | 4 | 5 | 20 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"typ":5,"via":"direct","unit":"V","category":"operating","parameter":"VIN pad"}]},"entity_type":"pin"},{"id":"SWD_RP2040-1","attrs":{"kind":"debug","label":"SWDIO","number":25,"chip_pin":"SWD","position":"1","connector":"SWD_RP2040","designator":"SWD_RP2040-1","description":"SWD Data Line","power_domain":"IOVDD"},"sources":[{"page":15,"quote":"| 1 | SWDIO | Digital | SWD Data Line |","method":"table","fragment":"entities_headers.json","table_id":"15_2"}],"attr_src":{"kind":{"page":15,"quote":"| 1 | SWDIO | Digital | SWD Data Line |","method":"table","fragment":"entities_headers.json","table_id":"15_2"},"label":{"page":15,"quote":"| 1 | SWDIO | Digital | SWD Data Line |","method":"table","fragment":"entities_headers.json","table_id":"15_2"},"number":{"via":"chip u1 SWD","method":"chip_link"},"chip_pin":{"page":15,"quote":"| 1 | SWDIO | Digital | SWD Data Line |","method":"table","fragment":"entities_headers.json","table_id":"15_2"},"position":{"page":15,"quote":"| 1 | SWDIO | Digital | SWD Data Line |","method":"table","fragment":"entities_headers.json","table_id":"15_2"},"connector":{"page":15,"quote":"| 1 | SWDIO | Digital | SWD Data Line |","method":"table","fragment":"entities_headers.json","table_id":"15_2"},"designator":{"page":15,"quote":"| 1 | SWDIO | Digital | SWD Data Line |","method":"table","fragment":"entities_headers.json","table_id":"15_2"},"description":{"page":15,"quote":"| 1 | SWDIO | Digital | SWD Data Line |","method":"table","fragment":"entities_headers.json","table_id":"15_2"},"power_domain":{"via":"chip u1 SWD","method":"chip_link"}},"chip_pin":{"pin":"SWD","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":15,"quote":"| 1 | SWDIO | Digital | SWD Data Line |","method":"table","fragment":"functions_headers.json","table_id":"15_2"},"signal":"SWDIO","category":"debug"}],"electrical":{"ioh":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOH = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 SWD","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"Output source current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"iol":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOL = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 SWD","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Output sink current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"vih":[{"max":3.6,"min":2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage High @ IOVDD=3.3V | VIH | 2 | IOVDD + 0.3 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 SWD","unit":"V","symbol":"VIH","category":"characteristic","parameter":"Input Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD + 0.3"}],"vil":[{"max":0.8,"min":-0.3,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage Low @ IOVDD=3.3V | VIL | -0.3 | 0.8 | V |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 SWD","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Input Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V"}],"voh":[{"max":3.3,"min":2.62,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage High @ IOVDD=3.3V | VOH | 2.62 | IOVDD | V | IOH = 2, 4, 8 or 12mA depending on setting |","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 SWD","unit":"V","symbol":"VOH","category":"characteristic","parameter":"Output Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting"}],"vol":[{"max":0.5,"min":0,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage Low @ IOVDD=3.3V | VOL | 0 | 0.5 | V | IOL = 2, 4, 8 or 12mA depending on setting |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 SWD","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Output Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 SWD","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 SWD","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 SWD","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 SWD","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 SWD","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.8,"min":-0.5,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 SWD","unit":"V","symbol":"VPIN","category":"absolute_max","parameter":"Voltage at IO (absolute maximum)","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V)"}],"five_volt_tolerant":[{"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |; very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 SWD","value":false,"symbol":"","category":"absolute_max","parameter":"5 V tolerant","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 SWD","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"SWD_RP2040-2","attrs":{"kind":"ground","label":"GND","position":"2","connector":"SWD_RP2040","designator":"SWD_RP2040-2","description":"Ground"},"sources":[{"page":15,"quote":"| 2 | GND | Digital | Ground |","method":"table","fragment":"entities_headers.json","table_id":"15_2"}],"attr_src":{"kind":{"page":15,"quote":"| 2 | GND | Digital | Ground |","method":"table","fragment":"entities_headers.json","table_id":"15_2"},"label":{"page":15,"quote":"| 2 | GND | Digital | Ground |","method":"table","fragment":"entities_headers.json","table_id":"15_2"},"position":{"page":15,"quote":"| 2 | GND | Digital | Ground |","method":"table","fragment":"entities_headers.json","table_id":"15_2"},"connector":{"page":15,"quote":"| 2 | GND | Digital | Ground |","method":"table","fragment":"entities_headers.json","table_id":"15_2"},"designator":{"page":15,"quote":"| 2 | GND | Digital | Ground |","method":"table","fragment":"entities_headers.json","table_id":"15_2"},"description":{"page":15,"quote":"| 2 | GND | Digital | Ground |","method":"table","fragment":"entities_headers.json","table_id":"15_2"}},"functions":[],"electrical":{},"entity_type":"pin"},{"id":"SWD_RP2040-3","attrs":{"kind":"debug","label":"SWCLK","number":24,"chip_pin":"SWCLK","position":"3","connector":"SWD_RP2040","designator":"SWD_RP2040-3","description":"SWD Clock","power_domain":"IOVDD"},"sources":[{"page":15,"quote":"| 3 | SWCLK | Digital | SWD Clock |","method":"table","fragment":"entities_headers.json","table_id":"15_2"}],"attr_src":{"kind":{"page":15,"quote":"| 3 | SWCLK | Digital | SWD Clock |","method":"table","fragment":"entities_headers.json","table_id":"15_2"},"label":{"page":15,"quote":"| 3 | SWCLK | Digital | SWD Clock |","method":"table","fragment":"entities_headers.json","table_id":"15_2"},"number":{"via":"chip u1 SWCLK","method":"chip_link"},"chip_pin":{"page":15,"quote":"| 3 | SWCLK | Digital | SWD Clock |","method":"table","fragment":"entities_headers.json","table_id":"15_2"},"position":{"page":15,"quote":"| 3 | SWCLK | Digital | SWD Clock |","method":"table","fragment":"entities_headers.json","table_id":"15_2"},"connector":{"page":15,"quote":"| 3 | SWCLK | Digital | SWD Clock |","method":"table","fragment":"entities_headers.json","table_id":"15_2"},"designator":{"page":15,"quote":"| 3 | SWCLK | Digital | SWD Clock |","method":"table","fragment":"entities_headers.json","table_id":"15_2"},"description":{"page":15,"quote":"| 3 | SWCLK | Digital | SWD Clock |","method":"table","fragment":"entities_headers.json","table_id":"15_2"},"power_domain":{"via":"chip u1 SWCLK","method":"chip_link"}},"chip_pin":{"pin":"SWCLK","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":15,"quote":"| 3 | SWCLK | Digital | SWD Clock |","method":"table","fragment":"functions_headers.json","table_id":"15_2"},"signal":"SWCLK","category":"debug"}],"electrical":{"ioh":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOH = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 SWCLK","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"Output source current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"iol":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOL = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 SWCLK","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Output sink current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"vih":[{"max":3.6,"min":2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage High @ IOVDD=3.3V | VIH | 2 | IOVDD + 0.3 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 SWCLK","unit":"V","symbol":"VIH","category":"characteristic","parameter":"Input Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD + 0.3"}],"vil":[{"max":0.8,"min":-0.3,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage Low @ IOVDD=3.3V | VIL | -0.3 | 0.8 | V |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 SWCLK","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Input Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V"}],"voh":[{"max":3.3,"min":2.62,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage High @ IOVDD=3.3V | VOH | 2.62 | IOVDD | V | IOH = 2, 4, 8 or 12mA depending on setting |","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 SWCLK","unit":"V","symbol":"VOH","category":"characteristic","parameter":"Output Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting"}],"vol":[{"max":0.5,"min":0,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage Low @ IOVDD=3.3V | VOL | 0 | 0.5 | V | IOL = 2, 4, 8 or 12mA depending on setting |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 SWCLK","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Output Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 SWCLK","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 SWCLK","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 SWCLK","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 SWCLK","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 SWCLK","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.8,"min":-0.5,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 SWCLK","unit":"V","symbol":"VPIN","category":"absolute_max","parameter":"Voltage at IO (absolute maximum)","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V)"}],"five_volt_tolerant":[{"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |; very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 SWCLK","value":false,"symbol":"","category":"absolute_max","parameter":"5 V tolerant","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 SWCLK","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"SWD_RP2040-4","attrs":{"kind":"power_out","label":"+3V3","position":"4","connector":"SWD_RP2040","designator":"SWD_RP2040-4","description":"+3V3 Power Rail"},"sources":[{"page":15,"quote":"| 4 | +3V3 | Digital | +3V3 Power Rail |","method":"table","fragment":"entities_headers.json","table_id":"15_2"}],"attr_src":{"kind":{"page":15,"quote":"| 4 | +3V3 | Digital | +3V3 Power Rail |","method":"table","fragment":"entities_headers.json","table_id":"15_2"},"label":{"page":15,"quote":"| 4 | +3V3 | Digital | +3V3 Power Rail |","method":"table","fragment":"entities_headers.json","table_id":"15_2"},"position":{"page":15,"quote":"| 4 | +3V3 | Digital | +3V3 Power Rail |","method":"table","fragment":"entities_headers.json","table_id":"15_2"},"connector":{"page":15,"quote":"| 4 | +3V3 | Digital | +3V3 Power Rail |","method":"table","fragment":"entities_headers.json","table_id":"15_2"},"designator":{"page":15,"quote":"| 4 | +3V3 | Digital | +3V3 Power Rail |","method":"table","fragment":"entities_headers.json","table_id":"15_2"},"description":{"page":15,"quote":"| 4 | +3V3 | Digital | +3V3 Power Rail |","method":"table","fragment":"entities_headers.json","table_id":"15_2"}},"functions":[],"electrical":{"output_voltage":[{"max":3.35,"min":3.25,"src":{"page":7,"quote":"| V3V3 | 3.3V output to user application | 3.25 | 3.3 | 3.35 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"typ":3.3,"via":"direct","unit":"V","category":"operating","parameter":"3.3 V output"}]},"entity_type":"pin"},{"id":"SWD_RP2040-5","attrs":{"kind":"control","label":"TP_RESETN","number":26,"chip_pin":"RUN","position":"5","connector":"SWD_RP2040","designator":"SWD_RP2040-5","description":"Reset","power_domain":"IOVDD"},"sources":[{"page":15,"quote":"| 5 | TP_RESETN | Digital | Reset |","method":"table","fragment":"entities_headers.json","table_id":"15_2"}],"attr_src":{"kind":{"page":15,"quote":"| 5 | TP_RESETN | Digital | Reset |","method":"table","fragment":"entities_headers.json","table_id":"15_2"},"label":{"page":15,"quote":"| 5 | TP_RESETN | Digital | Reset |","method":"table","fragment":"entities_headers.json","table_id":"15_2"},"number":{"via":"chip u1 RUN","method":"chip_link"},"chip_pin":{"page":15,"quote":"| 5 | TP_RESETN | Digital | Reset |","method":"table","fragment":"entities_headers.json","table_id":"15_2"},"position":{"page":15,"quote":"| 5 | TP_RESETN | Digital | Reset |","method":"table","fragment":"entities_headers.json","table_id":"15_2"},"connector":{"page":15,"quote":"| 5 | TP_RESETN | Digital | Reset |","method":"table","fragment":"entities_headers.json","table_id":"15_2"},"designator":{"page":15,"quote":"| 5 | TP_RESETN | Digital | Reset |","method":"table","fragment":"entities_headers.json","table_id":"15_2"},"description":{"page":15,"quote":"| 5 | TP_RESETN | Digital | Reset |","method":"table","fragment":"entities_headers.json","table_id":"15_2"},"power_domain":{"via":"chip u1 RUN","method":"chip_link"}},"chip_pin":{"pin":"RUN","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":15,"quote":"| 5 | TP_RESETN | Digital | Reset |","method":"table","fragment":"functions_headers.json","table_id":"15_2"},"signal":"TP_RESETN","category":"debug"}],"electrical":{"ioh":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOH = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 RUN","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"Output source current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"iol":[{"max":0.012,"src":{"doc":"RP2040 datasheet","page":617,"quote":"IOL = 2, 4, 8 or 12mA depending on setting; Default Drive Strength is 4mA","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"typ":0.004,"via":"chip u1 RUN","orig":{"max":12,"typ":4,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Output sink current (programmable drive strength)","conditions":"drive strength 2, 4, 8 or 12 mA by setting; default 4 mA"}],"vih":[{"max":3.6,"min":2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage High @ IOVDD=3.3V | VIH | 2 | IOVDD + 0.3 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 RUN","unit":"V","symbol":"VIH","category":"characteristic","parameter":"Input Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD + 0.3"}],"vil":[{"max":0.8,"min":-0.3,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Voltage Low @ IOVDD=3.3V | VIL | -0.3 | 0.8 | V |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 RUN","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Input Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V"}],"voh":[{"max":3.3,"min":2.62,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage High @ IOVDD=3.3V | VOH | 2.62 | IOVDD | V | IOH = 2, 4, 8 or 12mA depending on setting |","method":"derived","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 RUN","unit":"V","symbol":"VOH","category":"characteristic","parameter":"Output Voltage High @ IOVDD=3.3V","conditions":"IOVDD=3.3V; max = IOVDD; IOH = 2, 4, 8 or 12mA depending on setting"}],"vol":[{"max":0.5,"min":0,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Output Voltage Low @ IOVDD=3.3V | VOL | 0 | 0.5 | V | IOL = 2, 4, 8 or 12mA depending on setting |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 RUN","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Output Voltage Low @ IOVDD=3.3V","conditions":"IOVDD=3.3V; IOL = 2, 4, 8 or 12mA depending on setting"}],"vhys":[{"min":0.2,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Input Hysteresis Voltage @ IOVDD=3.3V | VHYS | 0.2 |  | V | Schmitt Trigger enabled |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 RUN","unit":"V","symbol":"VHYS","category":"characteristic","parameter":"Input Hysteresis Voltage @ IOVDD=3.3V","conditions":"IOVDD=3.3V; Schmitt Trigger enabled"}],"esd_hbm":[{"max":4000,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Human Body Model Digital (FT) pins only | HBM | 4 | kV | Compliant with JEDEC specification JS-001- 2012 (April 2012) |","method":"table","fragment":"ratings_pads.json","table_id":"616_1"},"via":"chip u1 RUN","orig":{"max":4,"unit":"kV"},"unit":"V","symbol":"HBM","category":"characteristic","parameter":"ESD Human Body Model"}],"pull_up":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Up Resistance | RPU | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 RUN","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Pull-Up Resistance"}],"pull_down":[{"max":80000,"min":50000,"src":{"doc":"RP2040 datasheet","page":617,"quote":"| Pull-Down Resistance | RPD | 50 | 80 | kΩ |  |","method":"table","fragment":"ratings_pads.json","table_id":"617_1"},"via":"chip u1 RUN","orig":{"max":80,"min":50,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Pull-Down Resistance"}],"input_leakage":[{"max":0.000001,"src":{"doc":"RP2040 datasheet","page":616,"quote":"| Pin Input Leakage Current | IIN |  | 1 | μA |  |","method":"table","fragment":"ratings_pads.json","table_id":"616_3"},"via":"chip u1 RUN","orig":{"max":1,"unit":"μA"},"unit":"A","symbol":"IIN","category":"characteristic","parameter":"Pin Input Leakage Current"}],"abs_max_voltage":[{"max":3.8,"min":-0.5,"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |  |","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 RUN","unit":"V","symbol":"VPIN","category":"absolute_max","parameter":"Voltage at IO (absolute maximum)","conditions":"max = IOVDD + 0.5 V (3.8 V at IOVDD=3.3 V)"}],"five_volt_tolerant":[{"src":{"doc":"RP2040 datasheet","page":615,"quote":"| Voltage at IO | VPIN | -0.5 | IOVDD + 0.5 | V |; very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"derived","fragment":"ratings_pads.json","table_id":"615_3"},"via":"chip u1 RUN","value":false,"symbol":"","category":"absolute_max","parameter":"5 V tolerant","conditions":"pin voltage abs-max is IOVDD + 0.5 V; FT pads tolerate up to 3.63 V only while IOVDD = 0 V"}],"unpowered_voltage_tolerant":[{"src":{"doc":"RP2040 datasheet","page":613,"quote":"very little current flows into the pin whilst it is below 3.63V and IOVDD is 0V","method":"table","fragment":"ratings_pads.json","table_id":"613_1"},"via":"chip u1 RUN","value":true,"symbol":"","category":"characteristic","parameter":"Fault tolerant: may be driven up to 3.63 V while IOVDD = 0 V"}]},"entity_type":"pin"},{"id":"SWD_NINA-1","attrs":{"kind":"debug","label":"TP_RST","position":"1","connector":"SWD_NINA","designator":"SWD_NINA-1","description":"Reset (NINA-W102 programming pad)"},"sources":[{"page":16,"quote":"| 1 | TP_RST | Digital | Reset |","method":"table","fragment":"entities_headers.json","table_id":"16_1"}],"attr_src":{"kind":{"page":16,"quote":"| 1 | TP_RST | Digital | Reset |","method":"table","fragment":"entities_headers.json","table_id":"16_1"},"label":{"page":16,"quote":"| 1 | TP_RST | Digital | Reset |","method":"table","fragment":"entities_headers.json","table_id":"16_1"},"position":{"page":16,"quote":"| 1 | TP_RST | Digital | Reset |","method":"table","fragment":"entities_headers.json","table_id":"16_1"},"connector":{"page":16,"quote":"| 1 | TP_RST | Digital | Reset |","method":"table","fragment":"entities_headers.json","table_id":"16_1"},"designator":{"page":16,"quote":"| 1 | TP_RST | Digital | Reset |","method":"table","fragment":"entities_headers.json","table_id":"16_1"},"description":{"page":16,"quote":"| 1 | TP_RST | Digital | Reset |","method":"table","fragment":"entities_headers.json","table_id":"16_1"}},"functions":[{"src":{"page":16,"quote":"| 1 | TP_RST | Digital | Reset |","method":"table","fragment":"functions_headers.json","table_id":"16_1"},"signal":"TP_RST","category":"debug"}],"electrical":{},"entity_type":"pin"},{"id":"SWD_NINA-2","attrs":{"kind":"debug","label":"TP_RX","position":"2","connector":"SWD_NINA","designator":"SWD_NINA-2","description":"Serial Rx (NINA-W102 programming pad)"},"sources":[{"page":16,"quote":"| 2 | TP_RX | Digital | Serial Rx |","method":"table","fragment":"entities_headers.json","table_id":"16_1"}],"attr_src":{"kind":{"page":16,"quote":"| 2 | TP_RX | Digital | Serial Rx |","method":"table","fragment":"entities_headers.json","table_id":"16_1"},"label":{"page":16,"quote":"| 2 | TP_RX | Digital | Serial Rx |","method":"table","fragment":"entities_headers.json","table_id":"16_1"},"position":{"page":16,"quote":"| 2 | TP_RX | Digital | Serial Rx |","method":"table","fragment":"entities_headers.json","table_id":"16_1"},"connector":{"page":16,"quote":"| 2 | TP_RX | Digital | Serial Rx |","method":"table","fragment":"entities_headers.json","table_id":"16_1"},"designator":{"page":16,"quote":"| 2 | TP_RX | Digital | Serial Rx |","method":"table","fragment":"entities_headers.json","table_id":"16_1"},"description":{"page":16,"quote":"| 2 | TP_RX | Digital | Serial Rx |","method":"table","fragment":"entities_headers.json","table_id":"16_1"}},"functions":[{"src":{"page":16,"quote":"| 2 | TP_RX | Digital | Serial Rx |","method":"table","fragment":"functions_headers.json","table_id":"16_1"},"signal":"TP_RX","category":"debug"}],"electrical":{},"entity_type":"pin"},{"id":"SWD_NINA-3","attrs":{"kind":"debug","label":"TP_TX","position":"3","connector":"SWD_NINA","designator":"SWD_NINA-3","description":"Serial Tx (NINA-W102 programming pad)"},"sources":[{"page":16,"quote":"| 3 | TP_TX | Digital | Serial Tx |","method":"table","fragment":"entities_headers.json","table_id":"16_1"}],"attr_src":{"kind":{"page":16,"quote":"| 3 | TP_TX | Digital | Serial Tx |","method":"table","fragment":"entities_headers.json","table_id":"16_1"},"label":{"page":16,"quote":"| 3 | TP_TX | Digital | Serial Tx |","method":"table","fragment":"entities_headers.json","table_id":"16_1"},"position":{"page":16,"quote":"| 3 | TP_TX | Digital | Serial Tx |","method":"table","fragment":"entities_headers.json","table_id":"16_1"},"connector":{"page":16,"quote":"| 3 | TP_TX | Digital | Serial Tx |","method":"table","fragment":"entities_headers.json","table_id":"16_1"},"designator":{"page":16,"quote":"| 3 | TP_TX | Digital | Serial Tx |","method":"table","fragment":"entities_headers.json","table_id":"16_1"},"description":{"page":16,"quote":"| 3 | TP_TX | Digital | Serial Tx |","method":"table","fragment":"entities_headers.json","table_id":"16_1"}},"functions":[{"src":{"page":16,"quote":"| 3 | TP_TX | Digital | Serial Tx |","method":"table","fragment":"functions_headers.json","table_id":"16_1"},"signal":"TP_TX","category":"debug"}],"electrical":{},"entity_type":"pin"},{"id":"SWD_NINA-4","attrs":{"kind":"debug","label":"TP_GPIO0","number":23,"nina_pin":"GPIO0","position":"4","connector":"SWD_NINA","designator":"SWD_NINA-4","description":"GPIO0 (NINA-W102 programming pad)","power_domain":"VDD3P3_RTC"},"sources":[{"page":16,"quote":"| 4 | TP_GPIO0 | Digital | GPIO0 |","method":"table","fragment":"entities_headers.json","table_id":"16_1"}],"attr_src":{"kind":{"page":16,"quote":"| 4 | TP_GPIO0 | Digital | GPIO0 |","method":"table","fragment":"entities_headers.json","table_id":"16_1"},"label":{"page":16,"quote":"| 4 | TP_GPIO0 | Digital | GPIO0 |","method":"table","fragment":"entities_headers.json","table_id":"16_1"},"number":{"via":"chip m1 GPIO0","method":"chip_link"},"nina_pin":{"page":16,"quote":"| 4 | TP_GPIO0 | Digital | GPIO0 |","method":"table","fragment":"entities_headers.json","table_id":"16_1"},"position":{"page":16,"quote":"| 4 | TP_GPIO0 | Digital | GPIO0 |","method":"table","fragment":"entities_headers.json","table_id":"16_1"},"connector":{"page":16,"quote":"| 4 | TP_GPIO0 | Digital | GPIO0 |","method":"table","fragment":"entities_headers.json","table_id":"16_1"},"designator":{"page":16,"quote":"| 4 | TP_GPIO0 | Digital | GPIO0 |","method":"table","fragment":"entities_headers.json","table_id":"16_1"},"description":{"page":16,"quote":"| 4 | TP_GPIO0 | Digital | GPIO0 |","method":"table","fragment":"entities_headers.json","table_id":"16_1"},"power_domain":{"via":"chip m1 GPIO0","method":"chip_link"}},"chip_pin":{"pin":"GPIO0","method":"rule","chip_id":"m1"},"functions":[{"src":{"page":16,"quote":"| 4 | TP_GPIO0 | Digital | GPIO0 |","method":"table","fragment":"functions_headers.json","table_id":"16_1"},"signal":"TP_GPIO0","category":"debug"},{"src":{"page":15,"quote":"| GPIO0 | 23 | I/O | GPIO0, ADC2_CH1, RTC_GPIO11, TOUCH1, EMAC_TX_CLK, CLK_OUT1, |  |  |","method":"table","fragment":"functions_pinoverview.json","table_id":"15_1"},"via":"chip m1 GPIO0","signal":"GPIO0","category":"gpio"},{"src":{"page":15,"quote":"| GPIO0 | 23 | I/O | GPIO0, ADC2_CH1, RTC_GPIO11, TOUCH1, EMAC_TX_CLK, CLK_OUT1, |  |  |","method":"table","fragment":"functions_pinoverview.json","table_id":"15_1"},"via":"chip m1 GPIO0","signal":"ADC2_CH1","category":"adc"},{"src":{"page":15,"quote":"| GPIO0 | 23 | I/O | GPIO0, ADC2_CH1, RTC_GPIO11, TOUCH1, EMAC_TX_CLK, CLK_OUT1, |  |  |","method":"table","fragment":"functions_pinoverview.json","table_id":"15_1"},"via":"chip m1 GPIO0","signal":"RTC_GPIO11","category":"rtc_gpio"},{"src":{"page":15,"quote":"| GPIO0 | 23 | I/O | GPIO0, ADC2_CH1, RTC_GPIO11, TOUCH1, EMAC_TX_CLK, CLK_OUT1, |  |  |","method":"table","fragment":"functions_pinoverview.json","table_id":"15_1"},"via":"chip m1 GPIO0","signal":"TOUCH1","category":"touch"},{"src":{"page":15,"quote":"| GPIO0 | 23 | I/O | GPIO0, ADC2_CH1, RTC_GPIO11, TOUCH1, EMAC_TX_CLK, CLK_OUT1, |  |  |","method":"table","fragment":"functions_pinoverview.json","table_id":"15_1"},"via":"chip m1 GPIO0","signal":"EMAC_TX_CLK","category":"ethernet"},{"src":{"page":15,"quote":"| GPIO0 | 23 | I/O | GPIO0, ADC2_CH1, RTC_GPIO11, TOUCH1, EMAC_TX_CLK, CLK_OUT1, |  |  |","method":"table","fragment":"functions_pinoverview.json","table_id":"15_1"},"via":"chip m1 GPIO0","signal":"CLK_OUT1","category":"clock"},{"src":{"page":15,"quote":"| GPIO0 | 23 | I/O | GPIO0, ADC2_CH1, RTC_GPIO11, TOUCH1, EMAC_TX_CLK, CLK_OUT1, |  |  |","method":"table","fragment":"functions_pinoverview.json","table_id":"15_1"},"via":"chip m1 GPIO0","signal":"GPIO matrix (UART/I2C/I2S/SPI/LEDC PWM/MCPWM/RMT/PCNT/TWAI routable)","category":"gpio_matrix"}],"electrical":{"ioh":[{"src":{"doc":"ESP32-D0WD-V3 datasheet","page":52,"quote":"|  |  | VDD3P3_RTC power domain 1, 2 | — | 40 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"52_1"},"typ":0.04,"via":"chip m1 GPIO0","orig":{"typ":40,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"High-level source current (VDD3P3_CPU / VDD3P3_RTC domain)","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, max drive strength"}],"iol":[{"src":{"doc":"ESP32-D0WD-V3 datasheet","page":52,"quote":"| IOL | Low-level sink current (VDD 1 = 3.3 V, VOL = 0.495 V, output drive strength set to the maximum) |  | — | 28 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"52_1"},"typ":0.028,"via":"chip m1 GPIO0","orig":{"typ":28,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level sink current","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, max drive strength"}],"vih":[{"max":3.6,"min":2.475,"src":{"doc":"ESP32-D0WD-V3 datasheet","page":52,"quote":"| VIH | High-level input voltage |  | 0.75 × VDD 1 | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"52_1"},"via":"chip m1 GPIO0","unit":"V","category":"characteristic","parameter":"High-level input voltage","conditions":"VDD=3.3V; 25 °C"}],"vil":[{"max":0.825,"min":-0.3,"src":{"doc":"ESP32-D0WD-V3 datasheet","page":52,"quote":"| VIL | Low-level input voltage |  | –0.3 | — | 0.25 × VDD 1 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"52_1"},"via":"chip m1 GPIO0","unit":"V","category":"characteristic","parameter":"Low-level input voltage","conditions":"VDD=3.3V; 25 °C"}],"voh":[{"min":2.64,"src":{"doc":"ESP32-D0WD-V3 datasheet","page":52,"quote":"| VOH | High-level output voltage |  | 0.8 × VDD 1 | — | — | V |","method":"derived","fragment":"ratings_pins.json","table_id":"52_1"},"via":"chip m1 GPIO0","unit":"V","category":"characteristic","parameter":"High-level output voltage","conditions":"VDD=3.3V; 25 °C"}],"vol":[{"max":0.33,"src":{"doc":"ESP32-D0WD-V3 datasheet","page":52,"quote":"| VOL | Low-level output voltage |  | — | — | 0.1 × VDD 1 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"52_1"},"via":"chip m1 GPIO0","unit":"V","category":"characteristic","parameter":"Low-level output voltage","conditions":"VDD=3.3V; 25 °C"}],"pull_up":[{"src":{"doc":"ESP32-D0WD-V3 datasheet","page":52,"quote":"| R PU | Resistance of internal pull-up resistor |  | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"52_1"},"typ":45000,"via":"chip m1 GPIO0","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Internal pull-up resistor","conditions":"VDD=3.3V; 25 °C"}],"pull_down":[{"src":{"doc":"ESP32-D0WD-V3 datasheet","page":52,"quote":"| R PD | Resistance of internal pull-down resistor |  | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"52_1"},"typ":45000,"via":"chip m1 GPIO0","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Internal pull-down resistor","conditions":"VDD=3.3V; 25 °C"}],"input_leakage":[{"max":5e-8,"src":{"doc":"ESP32-D0WD-V3 datasheet","page":52,"quote":"| IIH | High-level input current |  | — | — | 50 | nA |","method":"table","fragment":"ratings_pins.json","table_id":"52_1"},"via":"chip m1 GPIO0","orig":{"max":50,"unit":"nA"},"unit":"A","category":"characteristic","parameter":"High-level input current","conditions":"VDD=3.3V; 25 °C"}],"boot_strapping":[{"src":{"doc":"ESP32-D0WD-V3 datasheet","page":22,"quote":"| GPIO0 | Pull-up | 1 |","method":"table","fragment":"ratings_pins.json","table_id":"22_1"},"via":"chip m1 GPIO0","value":true,"category":"characteristic","parameter":"Strapping pin; default Pull-up (bit 1)","conditions":"default Pull-up, bit 1"}],"abs_max_voltage":[{"max":3.6,"min":-0.3,"src":{"doc":"ESP32-D0WD-V3 datasheet","page":52,"quote":"| VIH | High-level input voltage |  | 0.75 × VDD 1 | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"52_1"},"via":"chip m1 GPIO0","unit":"V","category":"absolute_max","parameter":"Max input (VDD + 0.3)","conditions":"VDD=3.3V; 25 °C"}],"input_capacitance":[{"src":{"doc":"ESP32-D0WD-V3 datasheet","page":52,"quote":"| CIN | Pin capacitance |  | — | 2 | — | pF |","method":"table","fragment":"ratings_pins.json","table_id":"52_1"},"typ":0,"via":"chip m1 GPIO0","orig":{"typ":2,"unit":"pF"},"unit":"F","category":"characteristic","parameter":"Pin capacitance","conditions":"VDD=3.3V; 25 °C"}],"five_volt_tolerant":[{"src":{"doc":"ESP32-D0WD-V3 datasheet","page":52,"quote":"| VIH | High-level input voltage |  | 0.75 × VDD 1 | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"52_1"},"via":"chip m1 GPIO0","value":false,"category":"characteristic","parameter":"5 V tolerant","conditions":"VDD=3.3V; 25 °C; VIH max = VDD + 0.3 V"}]},"entity_type":"pin"}],"taxonomy":{"schematic":{"role":"identity_overview","definition":"A full circuit schematic figure of the board (caption mentions schematic)"},"cover_legal":{"role":"other","definition":"Cover page, colophon, licence, legal disclaimer or trademark notice"},"gpio_adc_usage":{"role":"electrical_ratings","definition":"Application notes about GPIO voltage levels and ADC usage/limitations"},"pinout_diagram":{"role":"pins_or_terminals","definition":"A pinout or pin-numbering figure (its caption mentions pinout or pin numbering) mapping physical header pins to signal names and alternate functions"},"design_files_cad":{"role":"identity_overview","definition":"Links to design resources: schematic, PCB layout, STEP 3D model, Fritzing files"},"pin_descriptions":{"role":"pins_or_terminals","definition":"Text describing what individual pins do (power pins, RUN, ADC_VREF, internal GPIO, test points)"},"revision_history":{"role":"other","definition":"Documentation release / revision history"},"power_consumption":{"role":"performance","definition":"Measured supply current / power consumption tables or graphs in different operating modes"},"table_of_contents":{"role":"other","definition":"Table of contents listing sections and page numbers"},"mechanical_drawing":{"role":"mechanical_dimensions","definition":"Dimensioned mechanical drawing or text giving board size, thickness, hole positions and diameters"},"component_locations":{"role":"mechanical_dimensions","definition":"Component placement / locations drawing of the board"},"power_supply_design":{"role":"electrical_ratings","definition":"Power chain, regulator, powering the board from USB, batteries or external supplies"},"operating_conditions":{"role":"electrical_ratings","definition":"Recommended operating conditions: temperature range and allowed supply voltages"},"ordering_availability":{"role":"ordering_commercial","definition":"Ordering codes, part numbers, EAN, prices, minimum order quantity, availability guarantee"},"programming_debug_usb":{"role":"software_usage","definition":"Programming the flash, USB device/host usage, SWD debugging"},"smt_footprint_stencil":{"role":"mechanical_dimensions","definition":"Surface-mount footprint, pad layout or paste stencil drawings for mounting the board as a module"},"board_overview_features":{"role":"identity_overview","definition":"Overview of the board: what it is, key features list, main chip capabilities (cores, clock, memory, peripherals)"}},"variants":{},"commercial":{"other":{},"lifecycle":"active","checked_at":"2026-09-24T21:25:10+00:00","compliance":["CE (RED 2014/53/EU)","RoHS 2/3","FCC Part 15"],"ordering_codes":[{"code":"ABX00052","description":"Arduino Nano RP2040 Connect (US store SKU)"},{"code":"ABX00053","description":"SKU on the datasheet cover (header variant per Arduino's listing scheme)"}]},"mechanical":{"dims":{"width":{"src":{"page":16,"quote":"17.77mm","figure":"Mechanical dimensions of Arduino Nano RP2040 Connect","method":"drawing"},"unit":"mm","value":17.77},"hole_d":{"src":{"page":16,"quote":"Ø1.65mm","figure":"Mechanical dimensions of Arduino Nano RP2040 Connect","method":"drawing"},"unit":"mm","value":1.65},"length":{"src":{"page":16,"quote":"43.18mm","figure":"Mechanical dimensions of Arduino Nano RP2040 Connect","method":"drawing"},"unit":"mm","value":43.18},"hole_spacing_x":{"src":{"page":16,"quote":"40.64mm","figure":"Mechanical dimensions of Arduino Nano RP2040 Connect","method":"drawing"},"unit":"mm","value":40.64},"hole_spacing_y":{"src":{"page":16,"quote":"15.24mm","figure":"Mechanical dimensions of Arduino Nano RP2040 Connect","method":"drawing"},"unit":"mm","value":15.24},"hole_edge_offset":{"src":{"page":16,"quote":"1.26mm","figure":"Mechanical dimensions of Arduino Nano RP2040 Connect","method":"drawing"},"unit":"mm","value":1.26}},"kind":"mechanical","holes":[{"d":1.65,"x":1.26,"y":1.26,"src":{"page":16,"quote":"43.18mm / 17.77mm / 40.64mm / 15.24mm / 1.26mm / Ø1.65mm","method":"derived"},"face":"pcb","name":"M1"},{"d":1.65,"x":41.9,"y":1.26,"src":{"page":16,"quote":"43.18mm / 17.77mm / 40.64mm / 15.24mm / 1.26mm / Ø1.65mm","method":"derived"},"face":"pcb","name":"M2"},{"d":1.65,"x":1.26,"y":16.51,"src":{"page":16,"quote":"43.18mm / 17.77mm / 40.64mm / 15.24mm / 1.26mm / Ø1.65mm","method":"derived"},"face":"pcb","name":"M3"},{"d":1.65,"x":41.9,"y":16.51,"src":{"page":16,"quote":"43.18mm / 17.77mm / 40.64mm / 15.24mm / 1.26mm / Ø1.65mm","method":"derived"},"face":"pcb","name":"M4"}],"units":"mm","origin":"x=0 at the USB edge along 43.18 mm; y=0 bottom edge; z=0 PCB bottom","features":[{"h":2.9,"l":7.3,"w":8,"x":-1.3,"y":4.4,"src":{"page":16,"quote":"USB at the left edge","method":"drawing"},"name":"micro-USB receptacle","side":"top","assumed":"position read from the drawing; body size/height typical micro-USB","overhang":true}],"archetype":"pcb_board","assumptions":{"thickness":{"why":"PCB thickness not printed","value":1.6}}},"page_index":[{"page":1,"tags":["board_overview_features"],"primary":"board_overview_features"},{"page":2,"tags":["board_overview_features","programming_debug_usb"],"primary":"board_overview_features"},{"page":3,"tags":["power_supply_design","board_overview_features"],"primary":"board_overview_features"},{"page":4,"tags":["cover_legal"],"primary":"cover_legal"},{"page":5,"tags":["table_of_contents"],"primary":"table_of_contents"},{"page":6,"tags":["table_of_contents","revision_history"],"primary":"cover_legal"},{"page":7,"tags":["operating_conditions"],"primary":"operating_conditions"},{"page":8,"tags":["power_consumption"],"primary":"power_consumption"},{"page":9,"tags":["component_locations"],"primary":"component_locations"},{"page":10,"tags":["board_overview_features"],"primary":"board_overview_features"},{"page":11,"tags":["board_overview_features"],"primary":"board_overview_features"},{"page":12,"tags":["power_supply_design"],"primary":"power_supply_design"},{"page":13,"tags":[],"primary":"none_of_these"},{"page":14,"tags":["pinout_diagram","pin_descriptions"],"primary":"pin_descriptions"},{"page":15,"tags":["pin_descriptions"],"primary":"pin_descriptions"},{"page":16,"tags":["pin_descriptions"],"primary":"pin_descriptions"},{"page":17,"tags":["cover_legal"],"primary":"cover_legal"},{"page":18,"tags":["cover_legal"],"primary":"cover_legal"},{"page":19,"tags":["revision_history"],"primary":"revision_history"},{"page":20,"tags":["cover_legal","pin_descriptions","pinout_diagram"],"primary":"pinout_diagram"},{"page":21,"tags":["cover_legal","pin_descriptions","pinout_diagram"],"primary":"pinout_diagram"},{"page":22,"tags":["cover_legal","pin_descriptions","power_supply_design","pinout_diagram"],"primary":"pinout_diagram"},{"page":23,"tags":["cover_legal","pinout_diagram","pin_descriptions"],"primary":"pinout_diagram"},{"page":24,"tags":["cover_legal","pin_descriptions"],"primary":"pin_descriptions"},{"page":25,"tags":["cover_legal","pin_descriptions","power_supply_design"],"primary":"power_supply_design"}],"performance":[],"schema_name":"datasheet-1","part_ratings":{"input_voltage":[{"max":5.25,"min":4.75,"src":{"page":7,"quote":"| VUSB | Input voltage from USB connector | 4.75 | 5 | 5.25 | V |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"typ":5,"unit":"V","category":"operating","parameter":"USB input"}],"operating_temperature":[{"max":80,"min":-20,"src":{"page":7,"quote":"| TOP | Operating Temperature | -20 | - | 80 | °C |","method":"table","fragment":"ratings_board.json","table_id":"7_1"},"unit":"°C","category":"operating","parameter":"Operating temperature"}],"io_output_current_total":[{"max":0.05,"src":{"page":20,"quote":"MAXIMUM sum of all current being sunk into GPIO and QSPI pins is 50mA","figure":"Arduino Nano RP2040 Connect full pinout","method":"drawing","fragment":"ratings_board.json"},"orig":{"max":50,"unit":"mA"},"unit":"A","category":"absolute_max","parameter":"Sum of current sunk into GPIO and QSPI pins"}]}},"use_cases":["wireless-iot","tinyml-sensing","wired-networking","custom-io-timing","usb-devices","learning-prototyping"],"commercial":{"other":{},"lifecycle":"active","checked_at":"2026-09-24T21:25:10+00:00","compliance":["CE (RED 2014/53/EU)","RoHS 2/3","FCC Part 15"],"ordering_codes":[{"code":"ABX00052","description":"Arduino Nano RP2040 Connect (US store SKU)"},{"code":"ABX00053","description":"SKU on the datasheet cover (header variant per Arduino's listing scheme)"}]},"assembly_label":"Development board","assembly_level":3,"search_aliases":["ABX00052","ArduinoNanoRP2040Connect"],"children_summary":[{"id":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--mcu","part_number":"RP2040","manufacturer":"Raspberry Pi Ltd","role":"main_processor","architecture":"Dual Arm Cortex-M0+","clock_mhz":133,"memory":{"other":{"rom_kb":null},"sram_kb":264}},{"id":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--m1","part_number":"ESP32-D0WD-V","manufacturer":"Espressif Systems","role":"wireless_module","architecture":"Xtensa 32-bit LX6 (single/dual core)","clock_mhz":240,"memory":{"other":{"rom_kb":448},"sram_kb":520}},{"id":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--u4","part_number":"ATECC608A-MAHDA-T","manufacturer":"Microchip","role":"crypto","architecture":null,"clock_mhz":null,"memory":null},{"id":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--u5","part_number":"AT25SF128A-MHB-T","manufacturer":"Adesto/Renesas","role":"flash_memory","architecture":null,"clock_mhz":null,"memory":null},{"id":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--u6","part_number":"MP2322GQH","manufacturer":"Monolithic Power Systems","role":"buck_converter","architecture":null,"clock_mhz":null,"memory":null},{"id":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--u7","part_number":"DSC6111HI2B-012.0000","manufacturer":"Microchip","role":"oscillator","architecture":null,"clock_mhz":null,"memory":null},{"id":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--u8","part_number":"MP34DT06JTR","manufacturer":"STMicroelectronics","role":"microphone","architecture":null,"clock_mhz":null,"memory":null},{"id":"e1b2873b-8a98-5d75-a639-d8022b5e81a3--u9","part_number":"LSM6DSOXTR","manufacturer":"STMicroelectronics","role":"imu","architecture":null,"clock_mhz":null,"memory":null}],"design":{"assets":[{"other":{},"kind":"datasheet","url":"https://docs.arduino.cc/resources/datasheets/ABX00053-datasheet.pdf","label":"Datasheet","verification":"manufacturer","notes":null,"resolved_url":"https://docs.arduino.cc/resources/datasheets/ABX00053-datasheet.pdf"},{"other":{},"kind":"image","url":"https://store-usa.arduino.cc/cdn/shop/files/ABX00052_03.front_1200x900.jpg?v=1727105009","label":"Arduino Nano RP2040 Connect (official store photo)","verification":"manufacturer","notes":"inspected: shows the actual Nano RP2040 Connect (RP2040, NINA-W102, micro-USB, castellated pads, no headers); saved at work/arduino-nano-rp2040-connect/images/","resolved_url":"https://store-usa.arduino.cc/cdn/shop/files/ABX00052_03.front_1200x900.jpg?v=1727105009"},{"other":{},"kind":"cad","url":"arduino-nano-rp2040-connect.step","label":"STEP (generated from datasheet drawing)","verification":"generated","notes":"cad_check passed","resolved_url":"https://wlrumvsjnliyuuvzwnrt.supabase.co/storage/v1/object/public/geometry/arduino-nano-rp2040-connect.step"}],"cad":{"verification":"generated","envelope_complete":false,"assumptions":["thickness=1.6 mm assumed: PCB thickness not printed","feature micro-USB receptacle: position read from the drawing; body size/height typical micro-USB"],"step_path":"arduino-nano-rp2040-connect.step","mesh_path":"arduino-nano-rp2040-connect.stl","footprint_svg_path":null,"bbox":{"length_mm":44.48,"width_mm":17.77,"height_mm":4.5},"features":[],"step_url":"https://wlrumvsjnliyuuvzwnrt.supabase.co/storage/v1/object/public/geometry/arduino-nano-rp2040-connect.step","mesh_url":"https://wlrumvsjnliyuuvzwnrt.supabase.co/storage/v1/object/public/geometry/arduino-nano-rp2040-connect.stl","footprint_svg_url":null},"limitations":["Generated geometry is an approximate mechanical envelope; inspect original manufacturer CAD when available.","Generated footprint_svg_path is an outline, not a verified electrical land pattern.","Xirkit does not run fit checks; download step_url and test fit against your own enclosure."]}}}