{"publisher":"Xirkit — the structured parts marketplace","canonical":"https://www.xirkit.io/products/damiao-dm-j8009p-2ec-joint-motor-2a4e","markdown":"https://www.xirkit.io/products/damiao-dm-j8009p-2ec-joint-motor-2a4e/data.md","mcp":"https://www.xirkit.io/mcp","note":"Every value is traced to a cited source (see sources and per-value src). Null means unknown, never zero.","record":{"id":"2a4eb65b-0c25-5a0e-a36a-7cb4373a4df2","mpn":"DM-J8009P-2EC","name":"DAMIAO DM-J8009P-2EC Joint Motor","manufacturer":"DAMIAO","family":"actuator","summary":"DAMIAO DM-J8009P-2EC is a 24–48 V geared joint motor with its driver built in and a crossed-roller-bearing output: 20 N·m rated / 40 N·m peak through a 9:1 reduction, 100 rpm rated, 160 rpm no-load at 24 V and 320 rpm at 48 V, 20 A rated / 50 A peak, dual 14-bit magnetic encoders, CAN at 1 Mbps with MIT, position and speed modes. Ø98 × 61.7 mm, about 930 g.","schema_version":"3.0","revision":null,"tags":["actuator","quasi-direct-drive actuator","robotic actuator","joint actuator","can bus","bldc","damiao","robotics","legged robot","robot arm","mit mode","openarm"],"sources":[{"other":{},"id":"datasheet","url":"https://damiao.enactic.ai/en/products/hardware/dm-j8009p-2ec-v1.0/","title":"DAMIAO DM-J8009P-2EC Joint Motor datasheet","publisher":"DAMIAO","kind":"datasheet","retrieved_at":"2026-10-06T07:28:18+00:00","field_paths":["spec.constraints.electrical.supply_voltage_max_v","spec.constraints.electrical.supply_voltage_min_v","spec.geometry.body_diameter_mm","spec.geometry.body_length_mm","spec.geometry.cad.bbox.height_mm","spec.geometry.cad.bbox.length_mm","spec.geometry.cad.bbox.width_mm","spec.geometry.cad.envelope_complete","spec.geometry.cad.mesh_path","spec.geometry.cad.step_path","spec.geometry.cad.verification","spec.geometry.dimensions.height_mm","spec.geometry.dimensions.length_mm","spec.geometry.dimensions.width_mm","spec.geometry.other.weight_g","spec.provides.actuator_type","spec.provides.control_interface","spec.provides.control_modes","spec.provides.encoder","spec.provides.encoder_bits","spec.provides.features","spec.provides.gear_ratio","spec.provides.integrated_driver","spec.provides.motor_type","spec.provides.no_load_speed_rpm","spec.provides.other.pole_pairs","spec.provides.peak_torque_nm","spec.provides.rated_speed_rpm","spec.provides.rated_torque_nm","spec.usage.connectors","spec.usage.pinout_complete","spec.usage.requirements.other.peak_current_a","spec.usage.requirements.rated_current_a","spec.usage.requirements.rated_voltage_v"],"notes":"sha256 1be52f52553e11d8dad5ad3411d28c508ad9fcf5baedf77f0ab9474798e53e6c"},{"other":{},"id":"offer0","url":"https://aifitlab.com/products/damiao-dm-j8009p-2ec-servo-motor?variant=43744591642760","title":"aifitlab.com listing","publisher":null,"kind":"distributor","retrieved_at":"2026-10-06T07:29:30+00:00","field_paths":["offers"],"notes":null}],"assets":[{"other":{},"kind":"datasheet","url":"https://damiao.enactic.ai/en/products/hardware/dm-j8009p-2ec-v1.0/","label":"Datasheet","verification":"manufacturer","notes":null},{"other":{},"kind":"image","url":"https://damiao.enactic.ai/en/assets/images/image1-3532f0d681bebff3237783a5b8f9d31e.jpeg","label":"DAMIAO DM-J8009P-2EC joint motor — output face (Damiao manual)","verification":"manufacturer","notes":"inspected: black housing engraved DM-J8009P-2EC, aluminium output flange; the photo at the top of the maker manual"},{"other":{},"kind":"cad","url":"damiao-dm-j8009p-2ec.step","label":"STEP (generated from datasheet drawing)","verification":"generated","notes":"cad_check passed"}],"offers":[{"other":{"price_breaks":[]},"supplier":"aifitlab.com","url":"https://aifitlab.com/products/damiao-dm-j8009p-2ec-servo-motor?variant=43744591642760","currency":"USD","unit_price":395,"stock_status":"in_stock","region":"US","minimum_quantity":null,"checked_at":"2026-10-06T07:29:30+00:00","lead_time_days_min":null,"lead_time_days_max":null,"destination":"US","destination_postal_code":null,"notes":null,"price_basis":"listed","unit_price_max":null}],"best_for":[{"other":{},"label":"Robot arm joints (Enactic OpenArm)","reason":"quasi-direct-drive actuator: 20 N·m rated / 40 N·m peak at 9:1, 320 rpm no-load; OpenArm uses 2 per arm (Foxtech OpenArm configuration).","basis":"engineering_inference"},{"other":{},"label":"Robotics and motor control","reason":"CAN at 1 Mbps with MIT impedance, position and speed modes; position, velocity, torque and temperature feedback; dual absolute encoders.","basis":"engineering_inference"}],"children":[],"spec":{"other":{},"usage":{"other":{},"pinout":[],"derived":{},"connectors":[{"id":"power","kind":"XT30 power connector (XT30-F to XT30-M cable)","other":{},"pin_count":2},{"id":"can","kind":"GH1.25 2-pin CAN connector","other":{},"pin_count":2},{"id":"debug_uart","kind":"GH1.25 3-pin debugging serial port","other":{},"pin_count":3}],"pin_mappings":[],"requirements":{"other":{"peak_current_a":50},"data_inputs":[],"power_inputs":[],"rated_current_a":20,"rated_voltage_v":48},"pinout_complete":false},"geometry":{"cad":{"bbox":{"width_mm":98,"height_mm":61.7,"length_mm":98},"features":[],"mesh_path":"damiao-dm-j8009p-2ec.stl","step_path":"damiao-dm-j8009p-2ec.step","assumptions":[],"verification":"generated","envelope_complete":true},"other":{"weight_g":930},"derived":{},"dimensions":{"other":{},"width_mm":98,"height_mm":61.7,"length_mm":98},"feature_boxes":[],"body_length_mm":61.7,"mounting_holes":[],"body_diameter_mm":98},"provides":{"other":{"pole_pairs":21},"derived":{},"encoder":"dual magnetic single-turn absolute, 14-bit (motor + output)","features":["Used in Enactic's OpenArm robot arm: 2 per arm (with DM-J4340P/J4340 and DM-J4310)","Crossed roller bearing on the output (the non-P DM-J8009-2EC uses a thin-walled deep-groove ball bearing)","Dual encoders: single-turn absolute output position kept through power loss","Integrated motor and driver; speed, position, torque and temperature readable over CAN","CAN feedback frame: position, velocity, torque, MOSFET and rotor temperature","Protection: driver over-temperature 120 °C; over-voltage recommended ≤ 52 V; supply not below 15 V; over-current recommended ≤ 39 A","Motor: 21 pole pairs, phase inductance 80 µH, phase resistance 0.145 Ω","Package: motor with driver, XT30 power cable (200 mm), GH1.25 2-pin CAN cable and 3-pin debug cable (300 mm)"],"gear_ratio":9,"motor_type":"bldc","capabilities":[],"encoder_bits":14,"actuator_type":"qdd","control_modes":["MIT (impedance)","position-speed","speed"],"peak_torque_nm":40,"rated_speed_rpm":100,"rated_torque_nm":20,"control_interface":"CAN","integrated_driver":true,"no_load_speed_rpm":320},"compliance":{"other":{},"derived":{},"certifications":[]},"constraints":{"other":{},"derived":{},"thermal":{"other":{}},"electrical":{"other":{},"supply_voltage_max_v":48,"supply_voltage_min_v":24}}},"other":null,"source_type":"pdf","source_ref":"https://damiao.enactic.ai/en/products/hardware/dm-j8009p-2ec-v1.0/","datasheet":{"cad":{"bbox":{"max":[49,49,61.7],"min":[-49,-49,0],"width_mm":98,"height_mm":61.7,"length_mm":98},"check":{"failed":[],"passed":true},"expected":[{"d":98,"x":0,"y":0,"axis":"z","name":"envelope","what":"cylinder"},{"what":"envelope_z","value":61.7}],"archetype":"envelope_cylinder","mesh_path":"/Users/sumeet/Documents/Xirkit Parent/XirkitOnboard/work/damiao-dm-j8009p-2ec/07_cad/part.stl","step_path":"/Users/sumeet/Documents/Xirkit Parent/XirkitOnboard/work/damiao-dm-j8009p-2ec/07_cad/part.step","views_png":"/Users/sumeet/Documents/Xirkit Parent/XirkitOnboard/work/damiao-dm-j8009p-2ec/07_cad/views.png","export_stl":"damiao-dm-j8009p-2ec.stl","assumptions":[],"export_step":"damiao-dm-j8009p-2ec.step","envelope_complete":true},"chips":[],"fields":{"weight":{"src":{"page":13,"quote":"| Weight | Approx. 930g |  |","method":"table","table_id":"13_1"},"unit":"g","value":930},"encoder":{"src":{"page":13,"quote":"| Encoders | Encoder's resolution | 14 bit |","method":"table","table_id":"13_1"},"unit":null,"value":"dual magnetic single-turn absolute, 14-bit (motor + output)"},"connector":{"src":{"page":7,"quote":"| Power connector-1 |  | Connect the power supply via the XT30-F to XT30-M cable, with a rated voltage 24V (capable with 24-48V) to power the motor. |","method":"table","table_id":"7_1"},"unit":null,"value":"XT30 power; GH1.25 2-pin CAN; GH1.25 3-pin UART debug"},"gear_ratio":{"src":{"page":13,"quote":"| Motor characteristics | Reduction ratio | 9:1 |","method":"table","table_id":"13_1"},"unit":null,"value":9},"motor_type":{"src":{"page":13,"quote":"| Number of pole pairs | 21 |  |","method":"derived","table_id":"13_1"},"unit":null,"value":"bldc"},"pole_pairs":{"src":{"page":13,"quote":"| Number of pole pairs | 21 |  |","method":"table","table_id":"13_1"},"unit":null,"value":21},"peak_torque":{"src":{"page":13,"quote":"| Peak torque | 40NM |  |","method":"table","table_id":"13_1"},"unit":"N·m","value":40},"rated_speed":{"src":{"page":13,"quote":"| Rated speed | 100rpm |  |","method":"table","table_id":"13_1"},"unit":"rpm","value":100},"peak_current":{"src":{"page":13,"quote":"| Peak current | 50A |  |","method":"table","table_id":"13_1"},"unit":"A","value":50},"rated_torque":{"src":{"page":13,"quote":"| Rated torque | 20NM |  |","method":"table","table_id":"13_1"},"unit":"N·m","value":20},"actuator_type":{"src":{"page":13,"quote":"| Motor characteristics | Reduction ratio | 9:1 |","method":"derived","table_id":"13_1"},"unit":null,"value":"qdd"},"control_modes":{"src":{"page":13,"quote":"| Control and protection | Control mode | MIT mode |","method":"table","table_id":"13_1"},"unit":null,"value":["MIT (impedance)","position-speed","speed"]},"mount_pattern":{"src":{"page":8,"quote":"6xM5 ↓8 · Ø32 · 6xM4 ↓6 · Ø90 · 6xM4 ↓4 · Ø4 ↓4 · Ø3 ↓4","figure":"p8 motor dimension drawing","method":"drawing"},"unit":null,"value":"output: 6×M5 ↓8 on Ø32 with Ø4 / Ø3 locating holes; front flange: 6×M4 ↓6 on Ø90; rear: 6×M4 ↓4 on Ø90"},"no_load_speed":{"src":{"page":13,"quote":"| Maximum speed at non-loaded condition | 24V：160rpm 48V：320rpm |  |","method":"table","table_id":"13_1"},"unit":"rpm","value":320},"rated_current":{"src":{"page":13,"quote":"| Rated current | 20A |  |","method":"table","table_id":"13_1"},"unit":"A","value":20},"rated_voltage":{"src":{"page":13,"quote":"| Motor parameters | Rated voltage | 24V（24-48V） |","method":"table","table_id":"13_1"},"unit":"V","value":[24,48]},"control_interface":{"src":{"page":13,"quote":"| Communication | Control interface | CAN@1Mbps |","method":"table","table_id":"13_1"},"unit":null,"value":"CAN"},"integrated_driver":{"src":{"page":5,"quote":"- Integrated motor and driver design, compact structure, and high integration","method":"text"},"unit":null,"value":true}},"groups":{"all":[]},"source":{"url":"https://damiao.enactic.ai/en/products/hardware/dm-j8009p-2ec-v1.0/","pages":13,"sha256":"1be52f52553e11d8dad5ad3411d28c508ad9fcf5baedf77f0ab9474798e53e6c","onboarded_at":"2026-10-06T07:30:32+00:00"},"coverage":{"pct":91.2,"score":"31/34","passed":true,"explained_nulls":["gear_type","kt","kv","backdrive_torque","backlash","rotor_inertia","operating_temperature","lifecycle","compliance"]},"entities":[],"taxonomy":{"dimensions":{"role":"mechanical_dimensions","definition":"Size (diameter × length), packing size, dimension drawing or mounting pattern"},"site_chrome":{"role":"other","definition":"Website navigation, FAQs, reviews, related products, support links, footers"},"model_comparison":{"role":"electrical_ratings","definition":"Comparison table of several models of the series (one row per model: voltage, power, torque, current, speed, ratio, weight, size, encoder)"},"pricing_ordering":{"role":"ordering_commercial","definition":"Price, options (KV, driver board yes/no), SKU, shipping, payment, points"},"product_overview":{"role":"identity_overview","definition":"Product description / highlights: what the actuator integrates (motor, gearbox, driver, encoder), control modes, protections, applications"},"connectors_wiring":{"role":"pins_or_terminals","definition":"Power / CAN / UART connectors, cables in the wiring pack, pin assignments"},"specification_table":{"role":"electrical_ratings","definition":"Specification grid: voltage, rated/peak torque, speeds, currents, Kt/Kv, gear ratio, backlash, back-drive, encoder, inertia, weight, connectors, temperature"}},"variants":{},"commercial":{"other":{},"checked_at":"2026-10-06T07:29:30+00:00","compliance":[],"ordering_codes":[{"code":"DM-J8009P-2EC","description":"crossed-roller-bearing output (DM-J8009-2EC = ball-bearing output)"}]},"mechanical":{"dims":{"length":{"src":{"page":13,"quote":"| Height | 61.7mm |  |","method":"table","table_id":"13_1"},"unit":"mm","value":61.7},"diameter":{"src":{"page":13,"quote":"| Structure and weight | Outer diameter | 98mm |","method":"table","table_id":"13_1"},"unit":"mm","value":98}},"kind":"mechanical","holes":[],"units":"mm","origin":"axis = Z at x=y=0; envelope from z=0 to z=length","features":[],"archetype":"envelope_cylinder","assumptions":{}},"page_index":[{"page":1,"tags":[],"primary":"none_of_these"},{"page":2,"tags":[],"primary":"none_of_these"},{"page":3,"tags":[],"primary":"none_of_these"},{"page":4,"tags":[],"primary":"none_of_these"},{"page":5,"tags":["product_overview"],"primary":"product_overview"},{"page":6,"tags":["connectors_wiring"],"primary":"connectors_wiring"},{"page":7,"tags":["connectors_wiring"],"primary":"connectors_wiring"},{"page":8,"tags":["dimensions"],"primary":"dimensions"},{"page":9,"tags":[],"primary":"none_of_these"},{"page":10,"tags":[],"primary":"none_of_these"},{"page":11,"tags":[],"primary":"none_of_these"},{"page":12,"tags":["connectors_wiring"],"primary":"connectors_wiring"},{"page":13,"tags":["specification_table"],"primary":"specification_table"}],"performance":[],"schema_name":"datasheet-1","part_ratings":{}},"use_cases":["joint-actuation","robot-motor-control"],"commercial":{"other":{},"checked_at":"2026-10-06T07:29:30+00:00","compliance":[],"ordering_codes":[{"code":"DM-J8009P-2EC","description":"crossed-roller-bearing output (DM-J8009-2EC = ball-bearing output)"}]},"assembly_label":"Actuator","assembly_level":2,"search_aliases":["DM-J8009P-2EC","DM-J8009P","Damiao 8009P","DM8009P","Damiao J8009P"],"design":{"assets":[{"other":{},"kind":"datasheet","url":"https://damiao.enactic.ai/en/products/hardware/dm-j8009p-2ec-v1.0/","label":"Datasheet","verification":"manufacturer","notes":null,"resolved_url":"https://damiao.enactic.ai/en/products/hardware/dm-j8009p-2ec-v1.0/"},{"other":{},"kind":"image","url":"https://damiao.enactic.ai/en/assets/images/image1-3532f0d681bebff3237783a5b8f9d31e.jpeg","label":"DAMIAO DM-J8009P-2EC joint motor — output face (Damiao manual)","verification":"manufacturer","notes":"inspected: black housing engraved DM-J8009P-2EC, aluminium output flange; the photo at the top of the maker manual","resolved_url":"https://damiao.enactic.ai/en/assets/images/image1-3532f0d681bebff3237783a5b8f9d31e.jpeg"},{"other":{},"kind":"cad","url":"damiao-dm-j8009p-2ec.step","label":"STEP (generated from datasheet drawing)","verification":"generated","notes":"cad_check passed","resolved_url":"https://wlrumvsjnliyuuvzwnrt.supabase.co/storage/v1/object/public/geometry/damiao-dm-j8009p-2ec.step"}],"cad":{"verification":"generated","envelope_complete":true,"assumptions":[],"step_path":"damiao-dm-j8009p-2ec.step","mesh_path":"damiao-dm-j8009p-2ec.stl","footprint_svg_path":null,"bbox":{"length_mm":98,"width_mm":98,"height_mm":61.7},"features":[],"step_url":"https://wlrumvsjnliyuuvzwnrt.supabase.co/storage/v1/object/public/geometry/damiao-dm-j8009p-2ec.step","mesh_url":"https://wlrumvsjnliyuuvzwnrt.supabase.co/storage/v1/object/public/geometry/damiao-dm-j8009p-2ec.stl","footprint_svg_url":null},"limitations":["Generated geometry is an approximate mechanical envelope; inspect original manufacturer CAD when available.","Generated footprint_svg_path is an outline, not a verified electrical land pattern.","Xirkit does not run fit checks; download step_url and test fit against your own enclosure."]}}}