{"publisher":"Xirkit — the structured parts marketplace","canonical":"https://www.xirkit.io/products/generic-esp32-c3-supermini-dev-board-d19e","markdown":"https://www.xirkit.io/products/generic-esp32-c3-supermini-dev-board-d19e/data.md","mcp":"https://www.xirkit.io/mcp","note":"Every value is traced to a cited source (see sources and per-value src). Null means unknown, never zero.","record":{"id":"d19e90b2-3f36-5271-9c63-8d6eb106e2b0","mpn":"ESP32-C3 SuperMini","name":"ESP32-C3 SuperMini Dev Board","manufacturer":"Generic (unbranded)","family":"dev_board","summary":"ESP32-C3 SuperMini is the thumb-sized 22.5 × 18 mm ESP32-C3FN4 board: 160 MHz RISC-V, 4 MB flash, 400 KB SRAM, Wi-Fi 802.11 b/g/n and Bluetooth 5 LE, USB-C, 16 pins at 0.6″ row spacing with 13 GPIO (6 ADC), BOOT and RST buttons, blue LED on GPIO8, 3.3 V logic and an onboard 3.3 V regulator, about $6. Sources disagree on the USB bridge, SPI pins and max input.","schema_version":"3.0","revision":null,"tags":["dev_board","wifi","bluetooth","iot","small form factor","beginner friendly","esp32-c3fn4","microcontroller","development board","i2c","spi","uart","usb","arduino ide","esp-idf","micropython","esp32-c3","supermini","risc-v","usb-c","breadboard"],"sources":[{"other":{},"id":"datasheet","url":"https://protosupplies.com/product/esp32c3-supermini/","title":"ESP32-C3 SuperMini Dev Board datasheet","publisher":"Generic (unbranded)","kind":"datasheet","retrieved_at":"2026-10-12T10:30:02+00:00","field_paths":["spec.constraints.electrical.io_voltage_v","spec.constraints.electrical.logic_high_min_v","spec.constraints.electrical.max_current_ma","spec.constraints.electrical.pin_drive_max_ma","spec.constraints.electrical.supply_voltage_max_v","spec.constraints.electrical.supply_voltage_min_v","spec.geometry.cad.assumptions","spec.geometry.cad.bbox.height_mm","spec.geometry.cad.bbox.length_mm","spec.geometry.cad.bbox.width_mm","spec.geometry.cad.envelope_complete","spec.geometry.cad.mesh_path","spec.geometry.cad.step_path","spec.geometry.cad.verification","spec.geometry.dimensions.length_mm","spec.geometry.dimensions.width_mm","spec.provides.capabilities","spec.provides.features","spec.provides.gpio_count","spec.provides.memory.flash_kb","spec.provides.memory.sram_kb","spec.provides.software_frameworks","spec.provides.wireless","spec.usage.connectors","spec.usage.pin_mappings","spec.usage.pinout","spec.usage.pinout_complete","spec.usage.requirements.power_inputs"],"notes":"sha256 dda81103404643c444b9c4fd4492d36c1aa41a72f08ad10648064f622e7bab83"},{"other":{},"id":"offer0","url":"https://protosupplies.com/product/esp32c3-supermini/","title":"protosupplies.com listing","publisher":null,"kind":"distributor","retrieved_at":"2026-10-12T10:32:49+00:00","field_paths":["offers"],"notes":null}],"assets":[{"other":{},"kind":"datasheet","url":"https://protosupplies.com/product/esp32c3-supermini/","label":"Datasheet","verification":"manufacturer","notes":null},{"other":{},"kind":"image","url":"https://protosupplies.com/wp-content/uploads/2025/01/ESP32-C3.jpg","label":"ESP32-C3 SuperMini with loose 1×8 headers (ProtoSupplies)","verification":"unverified","notes":"inspected: black PCB, USB-C, BOOT and RST buttons, ESP32-C3 QFN, 40 MHz crystal, ceramic antenna at the far end, 2×8 gold pads labelled 21…0 / 5V G 3.3; retailer photo"},{"other":{},"kind":"cad","url":"esp32-c3-supermini.step","label":"STEP (generated from datasheet drawing)","verification":"generated","notes":"cad_check passed"}],"offers":[{"other":{"sku":"DEV-33","price_breaks":[]},"supplier":"protosupplies.com","url":"https://protosupplies.com/product/esp32c3-supermini/","currency":"USD","unit_price":5.95,"stock_status":"in_stock","region":"US","minimum_quantity":null,"checked_at":"2026-10-12T10:32:49+00:00","lead_time_days_min":null,"lead_time_days_max":null,"destination":"US","destination_postal_code":null,"notes":null,"price_basis":"listed","unit_price_max":null}],"best_for":[{"other":{},"label":"Connected IoT devices and wireless sensor nodes","reason":"On-board radio: Wi-Fi 802.11 b/g/n 2.4 GHz; Bluetooth 5.0 LE.","basis":"engineering_inference"},{"other":{},"label":"Space-constrained and embedded builds","reason":"22.5 × 18.0 mm footprint.","basis":"engineering_inference"},{"other":{},"label":"Learning and fast prototyping","reason":"Programs from Arduino IDE, ESP-IDF, MicroPython.","basis":"engineering_inference"},{"other":{},"label":"Custom USB devices (CDC serial, JTAG debug)","reason":"native USB Serial/JTAG on the ESP32-C3 through the USB-C port (ProtoSupplies, Components101; Mischianti reports a CH340 version).","basis":"engineering_inference"}],"children":[{"other":{},"ref_id":"d19e90b2-3f36-5271-9c63-8d6eb106e2b0--mcu","role":"main_processor","count":1,"notes":"Espressif Systems ESP32-C3FN4"}],"spec":{"other":{},"usage":{"other":{},"pinout":[{"id":"5V","kind":"power_in","label":"5V","notes":"External 5V power input or 5V output when powered via USB-C.","other":{},"position":"R1","reserved":false,"functions":["power_in"],"electrical":{"input_voltage":{"max":7,"min":5,"unit":"V","source":"p.6","conditions":"ProtoSupplies: 5–7 V on the VIN 5V pin"},"supply_current":{"typ":130,"unit":"mA","source":"p.6","conditions":"normal operation (ProtoSupplies)"},"input_voltage_max":{"max":6,"unit":"V","source":"p.21 table 21_1","conditions":"Components101 — conflicts with ProtoSupplies 7 V max"}}},{"id":"G","kind":"ground","label":"G","notes":"Common ground reference.","other":{},"position":"R2","reserved":false,"functions":["ground"],"voltage_v":0,"electrical":{}},{"id":"3.3","kind":"power_in","label":"3.3","notes":"Regulated 3.3V power output (from onboard LDO) or direct 3.3V input.","other":{},"position":"R3","reserved":false,"functions":["power_in"],"voltage_v":3.3,"electrical":{"input_voltage":{"typ":3.3,"unit":"V","source":"p.6","conditions":"direct 3.3 V input instead of 5 V"},"output_current":{"max":250,"unit":"mA","source":"p.6","conditions":"small external accessories"},"output_current_2":{"max":500,"unit":"mA","source":"p.15 table 15_1","conditions":"Mischianti — disagrees with the 250 mA guidance"}}},{"id":"4","kind":"gpio","label":"4","notes":"General-purpose I/O, 12-bit Analog Input (ADC1 Channel 4), SPI HD.","other":{},"position":"R4","reserved":false,"functions":["SCK (Arduino default)","A4","ADC1_CH4","FSPI_HD","MTMS","GPIO4","GPIO matrix (any routable peripheral signal)"],"voltage_v":3.3,"electrical":{"ioh":{"typ":40,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3; chip u1 GPIO4"},"iol":{"typ":28,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3; chip u1 GPIO4"},"vih":{"max":3.6,"min":2.475,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3; chip u1 GPIO4"},"vil":{"max":0.825,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD; chip u1 GPIO4"},"voh":{"min":2.64,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD; chip u1 GPIO4"},"vol":{"max":0.33,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD; chip u1 GPIO4"},"pull_up":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO4"},"pull_down":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO4"},"io_current":{"max":40,"min":10,"unit":"mA","source":"p.9 table 9_1","conditions":"depending on total chip loading"},"io_voltage":{"unit":"V","value":3.3,"source":"p.6"},"input_leakage":{"max":50,"unit":"nA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO4"},"abs_max_voltage":{"max":3.6,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V; chip u1 GPIO4"},"adc_input_range":{"max":2500,"min":0,"unit":"mV","source":"ESP32-C3 datasheet p.56 table 56_2","conditions":"ADC-capable GPIO0–GPIO5 only; ATTEN3; total error ±35 mV; chip u1 GPIO4"},"input_capacitance":{"typ":2,"unit":"pF","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO4"},"five_volt_tolerant":{"value":false,"source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"inputs limited to VDD + 0.3 V; chip u1 GPIO4"}},"max_drive_ma":28,"boot_strapping":false,"five_volt_tolerant":false},{"id":"3","kind":"gpio","label":"3","notes":"General-purpose I/O, 12-bit Analog Input (ADC1 Channel 3).","other":{},"position":"R5","reserved":false,"functions":["ADC1_CH3","GPIO3","GPIO matrix (any routable peripheral signal)"],"voltage_v":3.3,"electrical":{"ioh":{"typ":40,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3; chip u1 GPIO3"},"iol":{"typ":28,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3; chip u1 GPIO3"},"vih":{"max":3.6,"min":2.475,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3; chip u1 GPIO3"},"vil":{"max":0.825,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD; chip u1 GPIO3"},"voh":{"min":2.64,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD; chip u1 GPIO3"},"vol":{"max":0.33,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD; chip u1 GPIO3"},"pull_up":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO3"},"pull_down":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO3"},"io_current":{"max":40,"min":10,"unit":"mA","source":"p.9 table 9_1","conditions":"depending on total chip loading"},"io_voltage":{"unit":"V","value":3.3,"source":"p.6"},"input_leakage":{"max":50,"unit":"nA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO3"},"abs_max_voltage":{"max":3.6,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V; chip u1 GPIO3"},"adc_input_range":{"max":2500,"min":0,"unit":"mV","source":"ESP32-C3 datasheet p.56 table 56_2","conditions":"ADC-capable GPIO0–GPIO5 only; ATTEN3; total error ±35 mV; chip u1 GPIO3"},"input_capacitance":{"typ":2,"unit":"pF","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO3"},"five_volt_tolerant":{"value":false,"source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"inputs limited to VDD + 0.3 V; chip u1 GPIO3"}},"max_drive_ma":28,"boot_strapping":false,"five_volt_tolerant":false},{"id":"2","kind":"gpio","label":"2","notes":"General-purpose I/O, Analog Input (ADC1 Channel 2), SPI MISO. Strapping pin.","other":{},"position":"R6","reserved":false,"functions":["ADC1_CH2","SPI2_MISO","Strapping","GPIO2","FSPIQ","GPIO matrix (any routable peripheral signal)"],"voltage_v":3.3,"electrical":{"ioh":{"typ":40,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3; chip u1 GPIO2"},"iol":{"typ":28,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3; chip u1 GPIO2"},"vih":{"max":3.6,"min":2.475,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3; chip u1 GPIO2"},"vil":{"max":0.825,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD; chip u1 GPIO2"},"voh":{"min":2.64,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD; chip u1 GPIO2"},"vol":{"max":0.33,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD; chip u1 GPIO2"},"pull_up":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO2"},"pull_down":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO2"},"io_current":{"max":40,"min":10,"unit":"mA","source":"p.9 table 9_1","conditions":"depending on total chip loading"},"io_voltage":{"unit":"V","value":3.3,"source":"p.6"},"input_leakage":{"max":50,"unit":"nA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO2"},"boot_strapping":{"value":true,"source":"ESP32-C3 datasheet p.30 table 30_1","conditions":"GPIO2 floating, GPIO8 floating, GPIO9 weak pull-up by default; sampled at CHIP_EN rising, hold 3 ms; chip u1 GPIO2"},"abs_max_voltage":{"max":3.6,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V; chip u1 GPIO2"},"adc_input_range":{"max":2500,"min":0,"unit":"mV","source":"ESP32-C3 datasheet p.56 table 56_2","conditions":"ADC-capable GPIO0–GPIO5 only; ATTEN3; total error ±35 mV; chip u1 GPIO2"},"input_capacitance":{"typ":2,"unit":"pF","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO2"},"five_volt_tolerant":{"value":false,"source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"inputs limited to VDD + 0.3 V; chip u1 GPIO2"}},"max_drive_ma":28,"boot_strapping":true,"five_volt_tolerant":false},{"id":"1","kind":"gpio","label":"1","notes":"General-purpose I/O, 12-bit Analog Input (ADC1 Channel 1).","other":{},"position":"R7","reserved":false,"functions":["ADC1_CH1","GPIO1","XTAL_32K_N","GPIO matrix (any routable peripheral signal)"],"voltage_v":3.3,"electrical":{"ioh":{"typ":40,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3; chip u1 GPIO1"},"iol":{"typ":28,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3; chip u1 GPIO1"},"vih":{"max":3.6,"min":2.475,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3; chip u1 GPIO1"},"vil":{"max":0.825,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD; chip u1 GPIO1"},"voh":{"min":2.64,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD; chip u1 GPIO1"},"vol":{"max":0.33,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD; chip u1 GPIO1"},"pull_up":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO1"},"pull_down":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO1"},"io_current":{"max":40,"min":10,"unit":"mA","source":"p.9 table 9_1","conditions":"depending on total chip loading"},"io_voltage":{"unit":"V","value":3.3,"source":"p.6"},"input_leakage":{"max":50,"unit":"nA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO1"},"abs_max_voltage":{"max":3.6,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V; chip u1 GPIO1"},"adc_input_range":{"max":2500,"min":0,"unit":"mV","source":"ESP32-C3 datasheet p.56 table 56_2","conditions":"ADC-capable GPIO0–GPIO5 only; ATTEN3; total error ±35 mV; chip u1 GPIO1"},"input_capacitance":{"typ":2,"unit":"pF","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO1"},"five_volt_tolerant":{"value":false,"source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"inputs limited to VDD + 0.3 V; chip u1 GPIO1"}},"max_drive_ma":28,"boot_strapping":false,"five_volt_tolerant":false},{"id":"0","kind":"gpio","label":"0","notes":"General-purpose I/O, 12-bit Analog Input (ADC1 Channel 0), RTC wakeup.","other":{},"position":"R8","reserved":false,"functions":["ADC1_CH0","RTC_GPIO0","GPIO0","XTAL_32K_P","GPIO matrix (any routable peripheral signal)"],"voltage_v":3.3,"electrical":{"ioh":{"typ":40,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3; chip u1 GPIO0"},"iol":{"typ":28,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3; chip u1 GPIO0"},"vih":{"max":3.6,"min":2.475,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3; chip u1 GPIO0"},"vil":{"max":0.825,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD; chip u1 GPIO0"},"voh":{"min":2.64,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD; chip u1 GPIO0"},"vol":{"max":0.33,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD; chip u1 GPIO0"},"pull_up":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO0"},"pull_down":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO0"},"io_current":{"max":40,"min":10,"unit":"mA","source":"p.9 table 9_1","conditions":"depending on total chip loading"},"io_voltage":{"unit":"V","value":3.3,"source":"p.6"},"input_leakage":{"max":50,"unit":"nA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO0"},"abs_max_voltage":{"max":3.6,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V; chip u1 GPIO0"},"adc_input_range":{"max":2500,"min":0,"unit":"mV","source":"ESP32-C3 datasheet p.56 table 56_2","conditions":"ADC-capable GPIO0–GPIO5 only; ATTEN3; total error ±35 mV; chip u1 GPIO0"},"input_capacitance":{"typ":2,"unit":"pF","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO0"},"five_volt_tolerant":{"value":false,"source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"inputs limited to VDD + 0.3 V; chip u1 GPIO0"}},"max_drive_ma":28,"boot_strapping":false,"five_volt_tolerant":false},{"id":"5","kind":"gpio","label":"5","notes":"General-purpose I/O, 12-bit Analog Input (ADC2 Channel 0), SPI WP.","other":{},"position":"L1","reserved":false,"functions":["MISO (Arduino default)","A5","ADC2_CH0","FSPI_WP","RTC_GPIO5","MTDI","GPIO5","GPIO matrix (any routable peripheral signal)"],"voltage_v":3.3,"electrical":{"ioh":{"typ":40,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3; chip u1 GPIO5"},"iol":{"typ":28,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3; chip u1 GPIO5"},"vih":{"max":3.6,"min":2.475,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3; chip u1 GPIO5"},"vil":{"max":0.825,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD; chip u1 GPIO5"},"voh":{"min":2.64,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD; chip u1 GPIO5"},"vol":{"max":0.33,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD; chip u1 GPIO5"},"pull_up":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO5"},"pull_down":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO5"},"io_current":{"max":40,"min":10,"unit":"mA","source":"p.9 table 9_1","conditions":"depending on total chip loading"},"io_voltage":{"unit":"V","value":3.3,"source":"p.6"},"input_leakage":{"max":50,"unit":"nA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO5"},"abs_max_voltage":{"max":3.6,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V; chip u1 GPIO5"},"adc_input_range":{"max":2500,"min":0,"unit":"mV","source":"ESP32-C3 datasheet p.56 table 56_2","conditions":"ADC-capable GPIO0–GPIO5 only; ATTEN3; total error ±35 mV; chip u1 GPIO5"},"input_capacitance":{"typ":2,"unit":"pF","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO5"},"five_volt_tolerant":{"value":false,"source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"inputs limited to VDD + 0.3 V; chip u1 GPIO5"}},"max_drive_ma":28,"boot_strapping":false,"five_volt_tolerant":false},{"id":"6","kind":"gpio","label":"6","notes":"General-purpose I/O, SPI Clock line.","other":{},"position":"L2","reserved":false,"functions":["MOSI (Arduino default)","SPI2_SCK","FSPICLK","MTCK","GPIO6","GPIO matrix (any routable peripheral signal)"],"voltage_v":3.3,"electrical":{"ioh":{"typ":40,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3; chip u1 GPIO6"},"iol":{"typ":28,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3; chip u1 GPIO6"},"vih":{"max":3.6,"min":2.475,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3; chip u1 GPIO6"},"vil":{"max":0.825,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD; chip u1 GPIO6"},"voh":{"min":2.64,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD; chip u1 GPIO6"},"vol":{"max":0.33,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD; chip u1 GPIO6"},"pull_up":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO6"},"pull_down":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO6"},"io_current":{"max":40,"min":10,"unit":"mA","source":"p.9 table 9_1","conditions":"depending on total chip loading"},"io_voltage":{"unit":"V","value":3.3,"source":"p.6"},"input_leakage":{"max":50,"unit":"nA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO6"},"abs_max_voltage":{"max":3.6,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V; chip u1 GPIO6"},"input_capacitance":{"typ":2,"unit":"pF","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO6"},"five_volt_tolerant":{"value":false,"source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"inputs limited to VDD + 0.3 V; chip u1 GPIO6"}},"max_drive_ma":28,"boot_strapping":false,"five_volt_tolerant":false},{"id":"7","kind":"gpio","label":"7","notes":"General-purpose I/O, SPI MOSI data line.","other":{},"position":"L3","reserved":false,"functions":["SS (Arduino default)","SPI2_MOSI","FSPID","MTDO","GPIO7","GPIO matrix (any routable peripheral signal)"],"voltage_v":3.3,"electrical":{"ioh":{"typ":40,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3; chip u1 GPIO7"},"iol":{"typ":28,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3; chip u1 GPIO7"},"vih":{"max":3.6,"min":2.475,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3; chip u1 GPIO7"},"vil":{"max":0.825,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD; chip u1 GPIO7"},"voh":{"min":2.64,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD; chip u1 GPIO7"},"vol":{"max":0.33,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD; chip u1 GPIO7"},"pull_up":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO7"},"pull_down":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO7"},"io_current":{"max":40,"min":10,"unit":"mA","source":"p.9 table 9_1","conditions":"depending on total chip loading"},"io_voltage":{"unit":"V","value":3.3,"source":"p.6"},"input_leakage":{"max":50,"unit":"nA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO7"},"abs_max_voltage":{"max":3.6,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V; chip u1 GPIO7"},"input_capacitance":{"typ":2,"unit":"pF","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO7"},"five_volt_tolerant":{"value":false,"source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"inputs limited to VDD + 0.3 V; chip u1 GPIO7"}},"max_drive_ma":28,"boot_strapping":false,"five_volt_tolerant":false},{"id":"8","kind":"gpio","label":"8","notes":"Connected to onboard blue/green User LED (Active LOW). Strapping pin.","other":{},"position":"L4","reserved":false,"functions":["SDA (Arduino default)","blue user LED","LED_BUILTIN","Strapping","GPIO8","GPIO matrix (any routable peripheral signal)"],"voltage_v":3.3,"electrical":{"ioh":{"typ":40,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3; chip u1 GPIO8"},"iol":{"typ":28,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3; chip u1 GPIO8"},"vih":{"max":3.6,"min":2.475,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3; chip u1 GPIO8"},"vil":{"max":0.825,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD; chip u1 GPIO8"},"voh":{"min":2.64,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD; chip u1 GPIO8"},"vol":{"max":0.33,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD; chip u1 GPIO8"},"pull_up":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO8"},"pull_down":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO8"},"io_current":{"max":40,"min":10,"unit":"mA","source":"p.9 table 9_1","conditions":"depending on total chip loading"},"io_voltage":{"unit":"V","value":3.3,"source":"p.6"},"input_leakage":{"max":50,"unit":"nA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO8"},"boot_strapping":{"value":true,"source":"ESP32-C3 datasheet p.30 table 30_1","conditions":"GPIO2 floating, GPIO8 floating, GPIO9 weak pull-up by default; sampled at CHIP_EN rising, hold 3 ms; chip u1 GPIO8"},"abs_max_voltage":{"max":3.6,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V; chip u1 GPIO8"},"input_capacitance":{"typ":2,"unit":"pF","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO8"},"five_volt_tolerant":{"value":false,"source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"inputs limited to VDD + 0.3 V; chip u1 GPIO8"}},"max_drive_ma":28,"boot_strapping":true,"five_volt_tolerant":false},{"id":"9","kind":"gpio","label":"9","notes":"Connected to onboard BOOT tactile switch (Active LOW). Strapping pin.","other":{},"position":"L5","reserved":false,"functions":["SCL (Arduino default)","BOOT Button","Strapping","GPIO9","GPIO matrix (any routable peripheral signal)"],"voltage_v":3.3,"electrical":{"ioh":{"typ":40,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3; chip u1 GPIO9"},"iol":{"typ":28,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3; chip u1 GPIO9"},"vih":{"max":3.6,"min":2.475,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3; chip u1 GPIO9"},"vil":{"max":0.825,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD; chip u1 GPIO9"},"voh":{"min":2.64,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD; chip u1 GPIO9"},"vol":{"max":0.33,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD; chip u1 GPIO9"},"pull_up":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO9"},"pull_down":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO9"},"io_current":{"max":40,"min":10,"unit":"mA","source":"p.9 table 9_1","conditions":"depending on total chip loading"},"io_voltage":{"unit":"V","value":3.3,"source":"p.6"},"input_leakage":{"max":50,"unit":"nA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO9"},"boot_strapping":{"value":true,"source":"ESP32-C3 datasheet p.30 table 30_1","conditions":"GPIO2 floating, GPIO8 floating, GPIO9 weak pull-up by default; sampled at CHIP_EN rising, hold 3 ms; chip u1 GPIO9"},"abs_max_voltage":{"max":3.6,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V; chip u1 GPIO9"},"input_capacitance":{"typ":2,"unit":"pF","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO9"},"five_volt_tolerant":{"value":false,"source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"inputs limited to VDD + 0.3 V; chip u1 GPIO9"}},"max_drive_ma":28,"boot_strapping":true,"five_volt_tolerant":false},{"id":"10","kind":"gpio","label":"10","notes":"General-purpose I/O, SPI Chip Select line.","other":{},"position":"L6","reserved":false,"functions":["SPI2_CS","FSPICS0","GPIO10","GPIO matrix (any routable peripheral signal)"],"voltage_v":3.3,"electrical":{"ioh":{"typ":40,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3; chip u1 GPIO10"},"iol":{"typ":28,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3; chip u1 GPIO10"},"vih":{"max":3.6,"min":2.475,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3; chip u1 GPIO10"},"vil":{"max":0.825,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD; chip u1 GPIO10"},"voh":{"min":2.64,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD; chip u1 GPIO10"},"vol":{"max":0.33,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD; chip u1 GPIO10"},"pull_up":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO10"},"pull_down":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO10"},"io_current":{"max":40,"min":10,"unit":"mA","source":"p.9 table 9_1","conditions":"depending on total chip loading"},"io_voltage":{"unit":"V","value":3.3,"source":"p.6"},"input_leakage":{"max":50,"unit":"nA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO10"},"abs_max_voltage":{"max":3.6,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V; chip u1 GPIO10"},"input_capacitance":{"typ":2,"unit":"pF","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO10"},"five_volt_tolerant":{"value":false,"source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"inputs limited to VDD + 0.3 V; chip u1 GPIO10"}},"max_drive_ma":28,"boot_strapping":false,"five_volt_tolerant":false},{"id":"20","kind":"gpio","label":"20","notes":"Hardware UART0 Receive (RX) pin.","other":{},"position":"L7","reserved":false,"functions":["RX (Serial default)","U0_RXD","GPIO20","GPIO matrix (any routable peripheral signal)"],"voltage_v":3.3,"electrical":{"ioh":{"typ":40,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3; chip u1 GPIO20"},"iol":{"typ":28,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3; chip u1 GPIO20"},"vih":{"max":3.6,"min":2.475,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3; chip u1 GPIO20"},"vil":{"max":0.825,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD; chip u1 GPIO20"},"voh":{"min":2.64,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD; chip u1 GPIO20"},"vol":{"max":0.33,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD; chip u1 GPIO20"},"pull_up":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO20"},"pull_down":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO20"},"io_current":{"max":40,"min":10,"unit":"mA","source":"p.9 table 9_1","conditions":"depending on total chip loading"},"io_voltage":{"unit":"V","value":3.3,"source":"p.6"},"input_leakage":{"max":50,"unit":"nA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO20"},"abs_max_voltage":{"max":3.6,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V; chip u1 GPIO20"},"input_capacitance":{"typ":2,"unit":"pF","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO20"},"five_volt_tolerant":{"value":false,"source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"inputs limited to VDD + 0.3 V; chip u1 GPIO20"}},"max_drive_ma":28,"boot_strapping":false,"five_volt_tolerant":false},{"id":"21","kind":"gpio","label":"21","notes":"Hardware UART0 Transmit (TX) pin.","other":{},"position":"L8","reserved":false,"functions":["TX (Serial default)","U0_TXD","GPIO21","GPIO matrix (any routable peripheral signal)"],"voltage_v":3.3,"electrical":{"ioh":{"typ":40,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3; chip u1 GPIO21"},"iol":{"typ":28,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3; chip u1 GPIO21"},"vih":{"max":3.6,"min":2.475,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3; chip u1 GPIO21"},"vil":{"max":0.825,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD; chip u1 GPIO21"},"voh":{"min":2.64,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD; chip u1 GPIO21"},"vol":{"max":0.33,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD; chip u1 GPIO21"},"pull_up":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO21"},"pull_down":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO21"},"io_current":{"max":40,"min":10,"unit":"mA","source":"p.9 table 9_1","conditions":"depending on total chip loading"},"io_voltage":{"unit":"V","value":3.3,"source":"p.6"},"input_leakage":{"max":50,"unit":"nA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO21"},"abs_max_voltage":{"max":3.6,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V; chip u1 GPIO21"},"input_capacitance":{"typ":2,"unit":"pF","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO21"},"five_volt_tolerant":{"value":false,"source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"inputs limited to VDD + 0.3 V; chip u1 GPIO21"}},"max_drive_ma":28,"boot_strapping":false,"five_volt_tolerant":false}],"derived":{},"connectors":[{"id":"usb","kind":"USB Type-C (power + programming)","other":{}},{"id":"header","kind":"2 × 8 through-hole pins, 0.1″ pitch, 0.6″ (15.24 mm) row spacing, breadboard compatible; 1×8 strips shipped loose","other":{},"pitch_mm":2.54,"pin_count":16}],"pin_mappings":[{"other":{},"signal":"GPIO4","child_ref":"d19e90b2-3f36-5271-9c63-8d6eb106e2b0--mcu","route_type":"direct","board_pin_id":"4","child_pin_id":"GPIO4"},{"other":{},"signal":"GPIO3","child_ref":"d19e90b2-3f36-5271-9c63-8d6eb106e2b0--mcu","route_type":"direct","board_pin_id":"3","child_pin_id":"GPIO3"},{"other":{},"signal":"GPIO2","child_ref":"d19e90b2-3f36-5271-9c63-8d6eb106e2b0--mcu","route_type":"direct","board_pin_id":"2","child_pin_id":"GPIO2"},{"other":{},"signal":"GPIO1","child_ref":"d19e90b2-3f36-5271-9c63-8d6eb106e2b0--mcu","route_type":"direct","board_pin_id":"1","child_pin_id":"GPIO1"},{"other":{},"signal":"GPIO0","child_ref":"d19e90b2-3f36-5271-9c63-8d6eb106e2b0--mcu","route_type":"direct","board_pin_id":"0","child_pin_id":"GPIO0"},{"other":{},"signal":"GPIO5","child_ref":"d19e90b2-3f36-5271-9c63-8d6eb106e2b0--mcu","route_type":"direct","board_pin_id":"5","child_pin_id":"GPIO5"},{"other":{},"signal":"GPIO6","child_ref":"d19e90b2-3f36-5271-9c63-8d6eb106e2b0--mcu","route_type":"direct","board_pin_id":"6","child_pin_id":"GPIO6"},{"other":{},"signal":"GPIO7","child_ref":"d19e90b2-3f36-5271-9c63-8d6eb106e2b0--mcu","route_type":"direct","board_pin_id":"7","child_pin_id":"GPIO7"},{"other":{},"signal":"GPIO8","child_ref":"d19e90b2-3f36-5271-9c63-8d6eb106e2b0--mcu","route_type":"direct","board_pin_id":"8","child_pin_id":"GPIO8"},{"other":{},"signal":"GPIO9","child_ref":"d19e90b2-3f36-5271-9c63-8d6eb106e2b0--mcu","route_type":"direct","board_pin_id":"9","child_pin_id":"GPIO9"},{"other":{},"signal":"GPIO10","child_ref":"d19e90b2-3f36-5271-9c63-8d6eb106e2b0--mcu","route_type":"direct","board_pin_id":"10","child_pin_id":"GPIO10"},{"other":{},"signal":"GPIO20","child_ref":"d19e90b2-3f36-5271-9c63-8d6eb106e2b0--mcu","route_type":"direct","board_pin_id":"20","child_pin_id":"GPIO20"},{"other":{},"signal":"GPIO21","child_ref":"d19e90b2-3f36-5271-9c63-8d6eb106e2b0--mcu","route_type":"direct","board_pin_id":"21","child_pin_id":"GPIO21"}],"requirements":{"other":{},"data_inputs":[],"power_inputs":[{"name":"5V","notes":"External 5V power input or 5V output when powered via USB-C.","other":{},"voltage_max_v":7,"voltage_min_v":5},{"name":"3.3","notes":"Regulated 3.3V power output (from onboard LDO) or direct 3.3V input.","other":{}}]},"pinout_complete":true},"geometry":{"cad":{"bbox":{"width_mm":18,"height_mm":1.6,"length_mm":22.5},"features":[],"mesh_path":"esp32-c3-supermini.stl","step_path":"esp32-c3-supermini.step","assumptions":["thickness=1.6 mm assumed: PCB thickness not printed; 1.6 mm assumed for the CAD envelope only (Components101 gives 4.5 mm overall height with parts)"],"verification":"generated","envelope_complete":false},"other":{},"derived":{},"dimensions":{"other":{},"width_mm":18,"length_mm":22.5},"feature_boxes":[],"mounting_holes":[]},"provides":{"other":{},"memory":{"other":{},"sram_kb":400,"flash_kb":4096},"derived":{},"features":["Wi-Fi 802.11 b/g/n 2.4 GHz and Bluetooth 5.0 LE","RST and BOOT buttons (BOOT on GPIO9, strapping pin)","Blue user LED on GPIO8 (shares the default I2C SDA); red power LED","Power options (use one at a time — no power switching): 5 V from USB-C, 5–7 V on the 5V pin, or 3.3 V on the 3.3 pin","Operating current about 130 mA; 3.3 V pin load should stay under 250 mA (ProtoSupplies); Mischianti says the regulator gives up to 500 mA","USB: native USB Serial/JTAG (ProtoSupplies, Components101) — Mischianti says USB-serial via CH340; check your board for a separate bridge chip","Mischianti lists a CH340 USB-serial bridge on its board (conflicts with the native-USB sources)","Deep sleep about 43 µA after removing the power LED (Mischianti); Components101 quotes ~5 µA deep sleep","Onboard 3.3 V LDO, typically LP5907 / ME6211 series (Components101 — not a fixed part)","Antenna: onboard ceramic chip antenna; the Pro Mini variant adds an IPEX connector","GPIO5 analog input cannot be used while Wi-Fi is enabled (ADC2)","Safest pins with no strapping/LED/boot conditions: GPIO0, GPIO1, GPIO3, GPIO10","Arduino IDE: board \"ESP32C3 Dev Module\", enable \"USB CDC On Boot\" for serial over USB","UART0 RX on GPIO20, TX on GPIO21"],"wireless":["Wi-Fi 802.11 b/g/n 2.4 GHz","Bluetooth 5.0 LE"],"gpio_count":13,"capabilities":[{"notes":"count stated in datasheet (spi_count)","other":{},"protocol":"spi","available":true,"board_pin_ids":["4","2","5","6","7","10"],"instance_count":1},{"notes":"count stated in datasheet (adc_channels)","other":{},"protocol":"adc","available":true,"board_pin_ids":["4","3","2","1","0","5"],"instance_count":6},{"other":{},"protocol":"jtag","available":true,"board_pin_ids":["4","5","6","7"]},{"other":{},"protocol":"gpio","available":true,"board_pin_ids":["4","3","2","1","0","5","6","7","8","9","10","20","21"]},{"other":{},"protocol":"gpio_matrix","available":true,"board_pin_ids":["4","3","2","1","0","5","6","7","8","9","10","20","21"]},{"other":{},"protocol":"control","available":true,"board_pin_ids":["2","8","9"]},{"other":{},"protocol":"clock","available":true,"board_pin_ids":["1","0"]},{"other":{},"protocol":"other","available":true,"board_pin_ids":["0","5"]},{"notes":"count stated in datasheet (i2c_count)","other":{},"protocol":"i2c","available":true,"board_pin_ids":["8","9"],"instance_count":1},{"other":{},"protocol":"led","available":true,"board_pin_ids":["8"]},{"notes":"count stated in datasheet (uart_count)","other":{},"protocol":"uart","available":true,"board_pin_ids":["20","21"],"instance_count":2},{"notes":"USB-C, native USB Serial/JTAG (USB CDC)","other":{},"protocol":"usb","available":true,"board_pin_ids":[],"instance_count":1}],"software_frameworks":["Arduino IDE","ESP-IDF","MicroPython","Lua"]},"compliance":{"other":{},"derived":{},"certifications":[]},"constraints":{"other":{},"derived":{},"thermal":{"other":{}},"electrical":{"other":{},"io_voltage_v":3.3,"max_current_ma":130,"logic_high_min_v":2.475,"pin_drive_max_ma":28,"supply_voltage_max_v":7,"supply_voltage_min_v":3.3}}},"other":null,"source_type":"pdf","source_ref":"https://protosupplies.com/product/esp32c3-supermini/","datasheet":{"cad":{"bbox":{"max":[22.5,18,1.6],"min":[0,0,0],"width_mm":18,"height_mm":1.6,"length_mm":22.5},"check":{"failed":[],"passed":true},"expected":[{"what":"pcb","width":18,"length":22.5,"thickness":1.6}],"archetype":"pcb_board","mesh_path":"/Users/sumeet/Documents/Xirkit Parent/XirkitOnboard/work/esp32-c3-supermini/07_cad/part.stl","step_path":"/Users/sumeet/Documents/Xirkit Parent/XirkitOnboard/work/esp32-c3-supermini/07_cad/part.step","views_png":"/Users/sumeet/Documents/Xirkit Parent/XirkitOnboard/work/esp32-c3-supermini/07_cad/views.png","export_stl":"esp32-c3-supermini.stl","assumptions":["thickness=1.6 mm assumed: PCB thickness not printed; 1.6 mm assumed for the CAD envelope only (Components101 gives 4.5 mm overall height with parts)"],"export_step":"esp32-c3-supermini.step","source_step":null,"verification":"generated","envelope_complete":false},"chips":[{"id":"u1","mpn":"ESP32-C3FN4","src":{"page":9,"quote":"| Microcontroller | 32-bit RISC-V single-core (ESP32C3FN4) |","method":"table","table_id":"9_1"},"role":"main_processor","manufacturer":"Espressif Systems"}],"fields":{"usb":{"src":{"page":21,"quote":"| USB Interface | Native USB Serial/JTAG Controller (USB CDC via Type-C connector) |","method":"table","table_id":"21_1"},"unit":null,"value":"USB-C, native USB Serial/JTAG (USB CDC)"},"sram_kb":{"src":{"page":9,"quote":"| SRAM | 400 KBytes |","method":"table","table_id":"9_1"},"unit":null,"value":400},"flash_kb":{"src":{"page":9,"quote":"| Flash Memory | 4 MBytes |","method":"derived","table_id":"9_1"},"unit":null,"value":4096},"mcu_core":{"src":{"page":9,"quote":"| Microcontroller | 32-bit RISC-V single-core (ESP32C3FN4) |","method":"table","table_id":"9_1"},"unit":null,"value":"32-bit RISC-V single-core"},"wireless":{"src":{"page":9,"quote":"| Network | IEEE 802.11 b/g/n WiFi 2.4GHz |","method":"table","table_id":"9_1"},"unit":null,"value":["Wi-Fi 802.11 b/g/n 2.4 GHz","Bluetooth 5.0 LE"]},"clock_mhz":{"src":{"page":9,"quote":"| Clock Speed | 160MHz |","method":"table","table_id":"9_1"},"unit":null,"value":160},"i2c_count":{"src":{"page":9,"quote":"| I2C Ports | 1 |","method":"table","table_id":"9_1"},"unit":null,"value":1},"spi_count":{"src":{"page":9,"quote":"| SPI Ports | 1 |","method":"table","table_id":"9_1"},"unit":null,"value":1},"gpio_count":{"src":{"page":21,"quote":"| Total GPIO Pins | 13 user-accessible GPIOs on headers (GPIO0 to GPIO10, GPIO20, GPIO21) |","method":"table","table_id":"21_1"},"unit":null,"value":13},"io_voltage":{"src":{"page":9,"quote":"| Operating Voltage | 3.3V |","method":"table","table_id":"9_1"},"unit":"V","value":3.3},"uart_count":{"src":{"page":21,"quote":"| Hardware Interfaces | 1× SPI (FSPI/SPI2), 1× I2C, 2× UART, 6× PWM (LEDC), 1× I2S |","method":"table","table_id":"21_1"},"unit":null,"value":2},"adc_channels":{"src":{"page":9,"quote":"| Analog Input Pins | 6 (12-bit) |","method":"table","table_id":"9_1"},"unit":null,"value":6},"pwm_channels":{"src":{"page":21,"quote":"| Hardware Interfaces | 1× SPI (FSPI/SPI2), 1× I2C, 2× UART, 6× PWM (LEDC), 1× I2S |","method":"table","table_id":"21_1"},"unit":null,"value":6},"input_voltage":{"src":{"page":6,"quote":"- 5-7V applied to the VIN 5V pin","method":"text"},"unit":"V","value":[5,7]},"supply_current":{"src":{"page":6,"quote":"Operating current is about 130mA under normal operation and the maximum current draw per the datasheet is 500mA. A red power LED is lit when power is applied.","method":"text"},"orig":{"unit":"mA","value":130},"unit":"A","value":0.13},"regulator_output":{"src":{"page":6,"quote":"regulates it down to 3.3V for the microcontroller chip","method":"text"},"unit":"V","value":3.3},"software_frameworks":{"src":{"page":6,"quote":"The ESP32 -C3 is a very small IOT board with good programming support using the Arduino IDE. Besides the IDE, it can also be programmed using the Espressif IDF, Micropython, LUA and other programming environments.","method":"text"},"unit":null,"value":["Arduino IDE","ESP-IDF","MicroPython","Lua"]}},"groups":{"io":["4","3","2","1","0","5","6","7","8","9","10","20","21"],"all":["5V","G","3.3","4","3","2","1","0","5","6","7","8","9","10","20","21"]},"source":{"url":"https://protosupplies.com/product/esp32c3-supermini/","pages":22,"sha256":"dda81103404643c444b9c4fd4492d36c1aa41a72f08ad10648064f622e7bab83","onboarded_at":"2026-10-12T10:33:14+00:00"},"coverage":{"pct":100,"score":"42/42","passed":true,"explained_nulls":["operating_temperature","thickness","holes","component_heights","weight","lifecycle","compliance"]},"entities":[{"id":"5V","attrs":{"kind":"power_in","label":"5V","position":"R1","gpio_name":"-","designator":"5V","description":"External 5V power input or 5V output when powered via USB-C."},"sources":[{"page":21,"quote":"| 5V | - | Power Input (5V) | External 5V power input or 5V output when powered via USB-C. |","method":"table","fragment":"entities_header.json","table_id":"21_2"}],"attr_src":{"kind":{"page":21,"quote":"| 5V | - | Power Input (5V) | External 5V power input or 5V output when powered via USB-C. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"label":{"page":21,"quote":"| 5V | - | Power Input (5V) | External 5V power input or 5V output when powered via USB-C. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"position":{"page":21,"quote":"| 5V | - | Power Input (5V) | External 5V power input or 5V output when powered via USB-C. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"gpio_name":{"page":21,"quote":"| 5V | - | Power Input (5V) | External 5V power input or 5V output when powered via USB-C. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"designator":{"page":21,"quote":"| 5V | - | Power Input (5V) | External 5V power input or 5V output when powered via USB-C. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"description":{"page":21,"quote":"| 5V | - | Power Input (5V) | External 5V power input or 5V output when powered via USB-C. |","method":"table","fragment":"entities_header.json","table_id":"21_2"}},"functions":[],"electrical":{"input_voltage":[{"max":7,"min":5,"src":{"page":6,"quote":"- 5-7V applied to the VIN 5V pin","method":"text","fragment":"ratings_board.json"},"via":"direct","unit":"V","category":"operating","parameter":"Input voltage (5V pin / USB)","conditions":"ProtoSupplies: 5–7 V on the VIN 5V pin"}],"supply_current":[{"src":{"page":6,"quote":"Operating current is about 130mA under normal operation and the maximum current draw per the datasheet is 500mA. A red power LED is lit when power is applied.","method":"text","fragment":"ratings_board.json"},"typ":0.13,"via":"direct","orig":{"typ":130,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Operating current","conditions":"normal operation (ProtoSupplies)"}],"input_voltage_max":[{"max":6,"src":{"page":21,"quote":"| Input Voltage (Power) | 5.0 V via USB Type-C or 5V pin (3.3 V to 6.0 V Max) |","method":"table","fragment":"ratings_board.json","table_id":"21_1"},"via":"direct","unit":"V","category":"absolute_max","parameter":"Input voltage max (Components101)","conditions":"Components101 — conflicts with ProtoSupplies 7 V max"}]},"entity_type":"pin"},{"id":"G","attrs":{"kind":"ground","label":"G","position":"R2","gpio_name":"-","designator":"G","description":"Common ground reference."},"sources":[{"page":21,"quote":"| G | - | Power Ground (GND) | Common ground reference. |","method":"table","fragment":"entities_header.json","table_id":"21_2"}],"attr_src":{"kind":{"page":21,"quote":"| G | - | Power Ground (GND) | Common ground reference. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"label":{"page":21,"quote":"| G | - | Power Ground (GND) | Common ground reference. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"position":{"page":21,"quote":"| G | - | Power Ground (GND) | Common ground reference. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"gpio_name":{"page":21,"quote":"| G | - | Power Ground (GND) | Common ground reference. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"designator":{"page":21,"quote":"| G | - | Power Ground (GND) | Common ground reference. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"description":{"page":21,"quote":"| G | - | Power Ground (GND) | Common ground reference. |","method":"table","fragment":"entities_header.json","table_id":"21_2"}},"functions":[],"electrical":{},"entity_type":"pin"},{"id":"3.3","attrs":{"kind":"power_in","label":"3.3","position":"R3","gpio_name":"-","designator":"3.3","description":"Regulated 3.3V power output (from onboard LDO) or direct 3.3V input."},"sources":[{"page":21,"quote":"| 3.3 | - | Power Output / Input (3V3) | Regulated 3.3V power output (from onboard LDO) or direct 3.3V input. |","method":"table","fragment":"entities_header.json","table_id":"21_2"}],"attr_src":{"kind":{"page":21,"quote":"| 3.3 | - | Power Output / Input (3V3) | Regulated 3.3V power output (from onboard LDO) or direct 3.3V input. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"label":{"page":21,"quote":"| 3.3 | - | Power Output / Input (3V3) | Regulated 3.3V power output (from onboard LDO) or direct 3.3V input. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"position":{"page":21,"quote":"| 3.3 | - | Power Output / Input (3V3) | Regulated 3.3V power output (from onboard LDO) or direct 3.3V input. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"gpio_name":{"page":21,"quote":"| 3.3 | - | Power Output / Input (3V3) | Regulated 3.3V power output (from onboard LDO) or direct 3.3V input. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"designator":{"page":21,"quote":"| 3.3 | - | Power Output / Input (3V3) | Regulated 3.3V power output (from onboard LDO) or direct 3.3V input. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"description":{"page":21,"quote":"| 3.3 | - | Power Output / Input (3V3) | Regulated 3.3V power output (from onboard LDO) or direct 3.3V input. |","method":"table","fragment":"entities_header.json","table_id":"21_2"}},"functions":[],"electrical":{"input_voltage":[{"src":{"page":6,"quote":"- 3.3V applied to the VIN 3.3V pin","method":"text","fragment":"ratings_board.json"},"typ":3.3,"via":"direct","unit":"V","category":"operating","parameter":"Input voltage (3.3 pin)","conditions":"direct 3.3 V input instead of 5 V"}],"output_current":[{"max":0.25,"src":{"page":6,"quote":"The current draw should be limited to under 250mA.","method":"text","fragment":"ratings_board.json"},"via":"direct","orig":{"max":250,"unit":"mA"},"unit":"A","category":"operating","parameter":"3.3V pin load (ProtoSupplies)","conditions":"small external accessories"},{"max":0.5,"src":{"page":15,"quote":"| Power Regulator | 3.3 V output up to 500 mA |","method":"table","fragment":"ratings_board.json","table_id":"15_1"},"via":"direct","orig":{"max":500,"unit":"mA"},"unit":"A","category":"operating","parameter":"3.3V regulator output (Mischianti)","conditions":"Mischianti — disagrees with the 250 mA guidance"}]},"entity_type":"pin"},{"id":"4","attrs":{"kind":"gpio","label":"4","number":9,"chip_pin":"GPIO4","position":"R4","gpio_name":"GPIO04","designator":"4","description":"General-purpose I/O, 12-bit Analog Input (ADC1 Channel 4), SPI HD.","power_domain":"VDD3P3_RTC"},"sources":[{"page":21,"quote":"| 4 | GPIO04 | ADC1_CH4, FSPI_HD | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 4), SPI HD. |","method":"table","fragment":"entities_header.json","table_id":"21_2"}],"attr_src":{"kind":{"page":21,"quote":"| 4 | GPIO04 | ADC1_CH4, FSPI_HD | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 4), SPI HD. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"label":{"page":21,"quote":"| 4 | GPIO04 | ADC1_CH4, FSPI_HD | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 4), SPI HD. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"number":{"via":"chip u1 GPIO4","method":"chip_link"},"chip_pin":{"page":21,"quote":"| 4 | GPIO04 | ADC1_CH4, FSPI_HD | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 4), SPI HD. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"position":{"page":21,"quote":"| 4 | GPIO04 | ADC1_CH4, FSPI_HD | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 4), SPI HD. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"gpio_name":{"page":21,"quote":"| 4 | GPIO04 | ADC1_CH4, FSPI_HD | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 4), SPI HD. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"designator":{"page":21,"quote":"| 4 | GPIO04 | ADC1_CH4, FSPI_HD | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 4), SPI HD. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"description":{"page":21,"quote":"| 4 | GPIO04 | ADC1_CH4, FSPI_HD | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 4), SPI HD. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"power_domain":{"via":"chip u1 GPIO4","method":"chip_link"}},"chip_pin":{"pin":"GPIO4","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":6,"quote":"There are 4 pins assigned for an SPI bus. SCK on GPIO4, MISO on GPIO5, MOSI on GPIO6 and SS (Chip Select) on GPIO7.","method":"text","fragment":"functions_arduino.json"},"signal":"SCK (Arduino default)","category":"spi"},{"src":{"page":6,"quote":"There are 4 pins assigned for an SPI bus. SCK on GPIO4, MISO on GPIO5, MOSI on GPIO6 and SS (Chip Select) on GPIO7.","method":"text","fragment":"functions_arduino.json"},"signal":"A4","category":"adc"},{"src":{"page":21,"quote":"| 4 | GPIO04 | ADC1_CH4, FSPI_HD | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 4), SPI HD. |","method":"table","fragment":"functions_header.json","table_id":"21_2"},"note":"Components101 pin table (chip IO-MUX functions)","signal":"ADC1_CH4","category":"adc"},{"src":{"page":21,"quote":"| 4 | GPIO04 | ADC1_CH4, FSPI_HD | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 4), SPI HD. |","method":"table","fragment":"functions_header.json","table_id":"21_2"},"note":"Components101 pin table (chip IO-MUX functions)","signal":"FSPI_HD","category":"spi"},{"alt":"F0","src":{"page":20,"quote":"| 9 | GPIO4 |  | MTMS | … | GPIO4 | … | FSPIHD |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO4","signal":"MTMS","category":"jtag"},{"alt":"F1","src":{"page":20,"quote":"| 9 | GPIO4 |  | MTMS | … | GPIO4 | … | FSPIHD |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO4","signal":"GPIO4","category":"gpio"},{"src":{"page":20,"quote":"| 9 | GPIO4 |  | MTMS | … | GPIO4 | … | FSPIHD |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO4","signal":"GPIO matrix (any routable peripheral signal)","category":"gpio_matrix"}],"electrical":{"ioh":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOH | High-level source current (VDD 1 = 3.3 V, VOH >= 2.64 V, PAD_DRIVER = 3) | — | 40 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.04,"via":"chip u1 GPIO4","orig":{"typ":40,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"High-level source current","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3"}],"iol":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOL | Low-level sink current (VDD 1 = 3.3 V, VOL = 0.495 V, PAD_DRIVER = 3) | — | 28 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.028,"via":"chip u1 GPIO4","orig":{"typ":28,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Low-level sink current","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3"}],"vih":[{"max":3.6,"min":2.475,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO4","unit":"V","symbol":"VIH","category":"characteristic","parameter":"High-level input voltage","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3"}],"vil":[{"max":0.825,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIL | Low-level input voltage | –0.3 | — | 1 0.25 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO4","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Low-level input voltage","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD"}],"voh":[{"min":2.64,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOH | High-level output voltage | 1 0.8 × VDD | — | — | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO4","unit":"V","symbol":"VOH","category":"characteristic","parameter":"High-level output voltage","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD"}],"vol":[{"max":0.33,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOL | Low-level output voltage | — | — | 1 0.1 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO4","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Low-level output voltage","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD"}],"pull_up":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PU | Internal weak pull-up resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO4","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Internal weak pull-up resistor","conditions":"VDD=3.3V; 25 °C"}],"pull_down":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PD | Internal weak pull-down resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO4","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Internal weak pull-down resistor","conditions":"VDD=3.3V; 25 °C"}],"io_current":[{"max":0.04,"min":0.01,"src":{"page":9,"quote":"| DC Current per I/O Pin | 10-40mA depending on total chip loading |","method":"table","fragment":"ratings_board.json","table_id":"9_1"},"via":"group:io","orig":{"max":40,"min":10,"unit":"mA"},"unit":"A","category":"operating","parameter":"DC current per I/O pin","conditions":"depending on total chip loading"}],"io_voltage":[{"src":{"page":6,"quote":"The digital I/O is limited to 3.3V. If using with 5V logic, level translators should be used.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":5e-8,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IIH | High-level input current | — | — | 50 | nA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO4","orig":{"max":50,"unit":"nA"},"unit":"A","symbol":"IIH/IIL","category":"characteristic","parameter":"High/low-level input current","conditions":"VDD=3.3V; 25 °C"}],"abs_max_voltage":[{"max":3.6,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | … | VDD 1 + 0.3 | V |; | Input power pins 1 | Allowed input voltage | –0.3 | 3.6 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO4","unit":"V","category":"absolute_max","parameter":"IO input voltage (from VIH max)","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V"}],"adc_input_range":[{"max":2.5,"min":0,"src":{"doc":"ESP32-C3 datasheet","page":56,"quote":"|  | ATTEN3, effective measurement range of 0 ~ 2500 | –35 | 35 | mV |","method":"table","fragment":"ratings_pins.json","table_id":"56_2"},"via":"chip u1 GPIO4","orig":{"max":2500,"min":0,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"ADC effective measurement range (ATTEN3)","conditions":"ADC-capable GPIO0–GPIO5 only; ATTEN3; total error ±35 mV"}],"input_capacitance":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| CIN | Pin capacitance | — | 2 | — | pF |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0,"via":"chip u1 GPIO4","orig":{"typ":2,"unit":"pF"},"unit":"F","symbol":"CIN","category":"characteristic","parameter":"Pin capacitance","conditions":"VDD=3.3V; 25 °C"}],"five_volt_tolerant":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO4","value":false,"category":"absolute_max","parameter":"5 V tolerant","conditions":"inputs limited to VDD + 0.3 V"}]},"entity_type":"pin"},{"id":"3","attrs":{"kind":"gpio","label":"3","number":8,"chip_pin":"GPIO3","position":"R5","gpio_name":"GPIO03","designator":"3","description":"General-purpose I/O, 12-bit Analog Input (ADC1 Channel 3).","power_domain":"VDD3P3_RTC"},"sources":[{"page":21,"quote":"| 3 | GPIO03 | ADC1_CH3 | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 3). |","method":"table","fragment":"entities_header.json","table_id":"21_2"}],"attr_src":{"kind":{"page":21,"quote":"| 3 | GPIO03 | ADC1_CH3 | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 3). |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"label":{"page":21,"quote":"| 3 | GPIO03 | ADC1_CH3 | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 3). |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"number":{"via":"chip u1 GPIO3","method":"chip_link"},"chip_pin":{"page":21,"quote":"| 3 | GPIO03 | ADC1_CH3 | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 3). |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"position":{"page":21,"quote":"| 3 | GPIO03 | ADC1_CH3 | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 3). |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"gpio_name":{"page":21,"quote":"| 3 | GPIO03 | ADC1_CH3 | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 3). |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"designator":{"page":21,"quote":"| 3 | GPIO03 | ADC1_CH3 | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 3). |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"description":{"page":21,"quote":"| 3 | GPIO03 | ADC1_CH3 | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 3). |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"power_domain":{"via":"chip u1 GPIO3","method":"chip_link"}},"chip_pin":{"pin":"GPIO3","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| 3 | GPIO03 | ADC1_CH3 | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 3). |","method":"table","fragment":"functions_header.json","table_id":"21_2"},"note":"Components101 pin table (chip IO-MUX functions)","signal":"ADC1_CH3","category":"adc"},{"alt":"F0","src":{"page":20,"quote":"| 8 | GPIO3 |  | GPIO3 | … | GPIO3 | … |  |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO3","signal":"GPIO3","category":"gpio"},{"src":{"page":20,"quote":"| 8 | GPIO3 |  | GPIO3 | … | GPIO3 | … |  |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO3","signal":"GPIO matrix (any routable peripheral signal)","category":"gpio_matrix"}],"electrical":{"ioh":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOH | High-level source current (VDD 1 = 3.3 V, VOH >= 2.64 V, PAD_DRIVER = 3) | — | 40 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.04,"via":"chip u1 GPIO3","orig":{"typ":40,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"High-level source current","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3"}],"iol":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOL | Low-level sink current (VDD 1 = 3.3 V, VOL = 0.495 V, PAD_DRIVER = 3) | — | 28 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.028,"via":"chip u1 GPIO3","orig":{"typ":28,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Low-level sink current","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3"}],"vih":[{"max":3.6,"min":2.475,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO3","unit":"V","symbol":"VIH","category":"characteristic","parameter":"High-level input voltage","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3"}],"vil":[{"max":0.825,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIL | Low-level input voltage | –0.3 | — | 1 0.25 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO3","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Low-level input voltage","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD"}],"voh":[{"min":2.64,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOH | High-level output voltage | 1 0.8 × VDD | — | — | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO3","unit":"V","symbol":"VOH","category":"characteristic","parameter":"High-level output voltage","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD"}],"vol":[{"max":0.33,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOL | Low-level output voltage | — | — | 1 0.1 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO3","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Low-level output voltage","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD"}],"pull_up":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PU | Internal weak pull-up resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO3","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Internal weak pull-up resistor","conditions":"VDD=3.3V; 25 °C"}],"pull_down":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PD | Internal weak pull-down resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO3","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Internal weak pull-down resistor","conditions":"VDD=3.3V; 25 °C"}],"io_current":[{"max":0.04,"min":0.01,"src":{"page":9,"quote":"| DC Current per I/O Pin | 10-40mA depending on total chip loading |","method":"table","fragment":"ratings_board.json","table_id":"9_1"},"via":"group:io","orig":{"max":40,"min":10,"unit":"mA"},"unit":"A","category":"operating","parameter":"DC current per I/O pin","conditions":"depending on total chip loading"}],"io_voltage":[{"src":{"page":6,"quote":"The digital I/O is limited to 3.3V. If using with 5V logic, level translators should be used.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":5e-8,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IIH | High-level input current | — | — | 50 | nA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO3","orig":{"max":50,"unit":"nA"},"unit":"A","symbol":"IIH/IIL","category":"characteristic","parameter":"High/low-level input current","conditions":"VDD=3.3V; 25 °C"}],"abs_max_voltage":[{"max":3.6,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | … | VDD 1 + 0.3 | V |; | Input power pins 1 | Allowed input voltage | –0.3 | 3.6 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO3","unit":"V","category":"absolute_max","parameter":"IO input voltage (from VIH max)","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V"}],"adc_input_range":[{"max":2.5,"min":0,"src":{"doc":"ESP32-C3 datasheet","page":56,"quote":"|  | ATTEN3, effective measurement range of 0 ~ 2500 | –35 | 35 | mV |","method":"table","fragment":"ratings_pins.json","table_id":"56_2"},"via":"chip u1 GPIO3","orig":{"max":2500,"min":0,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"ADC effective measurement range (ATTEN3)","conditions":"ADC-capable GPIO0–GPIO5 only; ATTEN3; total error ±35 mV"}],"input_capacitance":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| CIN | Pin capacitance | — | 2 | — | pF |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0,"via":"chip u1 GPIO3","orig":{"typ":2,"unit":"pF"},"unit":"F","symbol":"CIN","category":"characteristic","parameter":"Pin capacitance","conditions":"VDD=3.3V; 25 °C"}],"five_volt_tolerant":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO3","value":false,"category":"absolute_max","parameter":"5 V tolerant","conditions":"inputs limited to VDD + 0.3 V"}]},"entity_type":"pin"},{"id":"2","attrs":{"kind":"gpio","label":"2","number":6,"chip_pin":"GPIO2","position":"R6","gpio_name":"GPIO02","designator":"2","description":"General-purpose I/O, Analog Input (ADC1 Channel 2), SPI MISO. Strapping pin.","power_domain":"VDD3P3_RTC"},"sources":[{"page":21,"quote":"| 2 | GPIO02 | ADC1_CH2, SPI2_MISO, Strapping | General-purpose I/O, Analog Input (ADC1 Channel 2), SPI MISO. Strapping pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"}],"attr_src":{"kind":{"page":21,"quote":"| 2 | GPIO02 | ADC1_CH2, SPI2_MISO, Strapping | General-purpose I/O, Analog Input (ADC1 Channel 2), SPI MISO. Strapping pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"label":{"page":21,"quote":"| 2 | GPIO02 | ADC1_CH2, SPI2_MISO, Strapping | General-purpose I/O, Analog Input (ADC1 Channel 2), SPI MISO. Strapping pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"number":{"via":"chip u1 GPIO2","method":"chip_link"},"chip_pin":{"page":21,"quote":"| 2 | GPIO02 | ADC1_CH2, SPI2_MISO, Strapping | General-purpose I/O, Analog Input (ADC1 Channel 2), SPI MISO. Strapping pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"position":{"page":21,"quote":"| 2 | GPIO02 | ADC1_CH2, SPI2_MISO, Strapping | General-purpose I/O, Analog Input (ADC1 Channel 2), SPI MISO. Strapping pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"gpio_name":{"page":21,"quote":"| 2 | GPIO02 | ADC1_CH2, SPI2_MISO, Strapping | General-purpose I/O, Analog Input (ADC1 Channel 2), SPI MISO. Strapping pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"designator":{"page":21,"quote":"| 2 | GPIO02 | ADC1_CH2, SPI2_MISO, Strapping | General-purpose I/O, Analog Input (ADC1 Channel 2), SPI MISO. Strapping pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"description":{"page":21,"quote":"| 2 | GPIO02 | ADC1_CH2, SPI2_MISO, Strapping | General-purpose I/O, Analog Input (ADC1 Channel 2), SPI MISO. Strapping pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"power_domain":{"via":"chip u1 GPIO2","method":"chip_link"}},"chip_pin":{"pin":"GPIO2","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| 2 | GPIO02 | ADC1_CH2, SPI2_MISO, Strapping | General-purpose I/O, Analog Input (ADC1 Channel 2), SPI MISO. Strapping pin. |","method":"table","fragment":"functions_header.json","table_id":"21_2"},"note":"Components101 pin table (chip IO-MUX functions)","signal":"ADC1_CH2","category":"adc"},{"src":{"page":21,"quote":"| 2 | GPIO02 | ADC1_CH2, SPI2_MISO, Strapping | General-purpose I/O, Analog Input (ADC1 Channel 2), SPI MISO. Strapping pin. |","method":"table","fragment":"functions_header.json","table_id":"21_2"},"note":"Components101 pin table (chip IO-MUX functions)","signal":"SPI2_MISO","category":"spi"},{"src":{"page":21,"quote":"| 2 | GPIO02 | ADC1_CH2, SPI2_MISO, Strapping | General-purpose I/O, Analog Input (ADC1 Channel 2), SPI MISO. Strapping pin. |","method":"table","fragment":"functions_header.json","table_id":"21_2"},"note":"Components101 pin table (chip IO-MUX functions)","signal":"Strapping","category":"control"},{"alt":"F0","src":{"page":20,"quote":"| 6 | GPIO2 |  | GPIO2 | … | GPIO2 | … | FSPIQ |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO2","signal":"GPIO2","category":"gpio"},{"alt":"F2","src":{"page":20,"quote":"| 6 | GPIO2 |  | GPIO2 | … | GPIO2 | … | FSPIQ |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO2","signal":"FSPIQ","category":"spi"},{"src":{"page":20,"quote":"| 6 | GPIO2 |  | GPIO2 | … | GPIO2 | … | FSPIQ |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO2","signal":"GPIO matrix (any routable peripheral signal)","category":"gpio_matrix"}],"electrical":{"ioh":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOH | High-level source current (VDD 1 = 3.3 V, VOH >= 2.64 V, PAD_DRIVER = 3) | — | 40 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.04,"via":"chip u1 GPIO2","orig":{"typ":40,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"High-level source current","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3"}],"iol":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOL | Low-level sink current (VDD 1 = 3.3 V, VOL = 0.495 V, PAD_DRIVER = 3) | — | 28 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.028,"via":"chip u1 GPIO2","orig":{"typ":28,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Low-level sink current","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3"}],"vih":[{"max":3.6,"min":2.475,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO2","unit":"V","symbol":"VIH","category":"characteristic","parameter":"High-level input voltage","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3"}],"vil":[{"max":0.825,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIL | Low-level input voltage | –0.3 | — | 1 0.25 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO2","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Low-level input voltage","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD"}],"voh":[{"min":2.64,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOH | High-level output voltage | 1 0.8 × VDD | — | — | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO2","unit":"V","symbol":"VOH","category":"characteristic","parameter":"High-level output voltage","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD"}],"vol":[{"max":0.33,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOL | Low-level output voltage | — | — | 1 0.1 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO2","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Low-level output voltage","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD"}],"pull_up":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PU | Internal weak pull-up resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO2","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Internal weak pull-up resistor","conditions":"VDD=3.3V; 25 °C"}],"pull_down":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PD | Internal weak pull-down resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO2","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Internal weak pull-down resistor","conditions":"VDD=3.3V; 25 °C"}],"io_current":[{"max":0.04,"min":0.01,"src":{"page":9,"quote":"| DC Current per I/O Pin | 10-40mA depending on total chip loading |","method":"table","fragment":"ratings_board.json","table_id":"9_1"},"via":"group:io","orig":{"max":40,"min":10,"unit":"mA"},"unit":"A","category":"operating","parameter":"DC current per I/O pin","conditions":"depending on total chip loading"}],"io_voltage":[{"src":{"page":6,"quote":"The digital I/O is limited to 3.3V. If using with 5V logic, level translators should be used.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":5e-8,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IIH | High-level input current | — | — | 50 | nA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO2","orig":{"max":50,"unit":"nA"},"unit":"A","symbol":"IIH/IIL","category":"characteristic","parameter":"High/low-level input current","conditions":"VDD=3.3V; 25 °C"}],"boot_strapping":[{"src":{"doc":"ESP32-C3 datasheet","page":30,"quote":"| Strapping Pin | Default Configuration | Bit Value | GPIO2 | Floating | GPIO8 | Floating | GPIO9 | Weak pull-up | 1 |","method":"derived","fragment":"ratings_pins.json","table_id":"30_1"},"via":"chip u1 GPIO2","value":true,"category":"characteristic","parameter":"Strapping pin (boot mode selection)","conditions":"GPIO2 floating, GPIO8 floating, GPIO9 weak pull-up by default; sampled at CHIP_EN rising, hold 3 ms"}],"abs_max_voltage":[{"max":3.6,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | … | VDD 1 + 0.3 | V |; | Input power pins 1 | Allowed input voltage | –0.3 | 3.6 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO2","unit":"V","category":"absolute_max","parameter":"IO input voltage (from VIH max)","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V"}],"adc_input_range":[{"max":2.5,"min":0,"src":{"doc":"ESP32-C3 datasheet","page":56,"quote":"|  | ATTEN3, effective measurement range of 0 ~ 2500 | –35 | 35 | mV |","method":"table","fragment":"ratings_pins.json","table_id":"56_2"},"via":"chip u1 GPIO2","orig":{"max":2500,"min":0,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"ADC effective measurement range (ATTEN3)","conditions":"ADC-capable GPIO0–GPIO5 only; ATTEN3; total error ±35 mV"}],"input_capacitance":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| CIN | Pin capacitance | — | 2 | — | pF |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0,"via":"chip u1 GPIO2","orig":{"typ":2,"unit":"pF"},"unit":"F","symbol":"CIN","category":"characteristic","parameter":"Pin capacitance","conditions":"VDD=3.3V; 25 °C"}],"five_volt_tolerant":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO2","value":false,"category":"absolute_max","parameter":"5 V tolerant","conditions":"inputs limited to VDD + 0.3 V"}]},"entity_type":"pin"},{"id":"1","attrs":{"kind":"gpio","label":"1","number":5,"chip_pin":"GPIO1","position":"R7","gpio_name":"GPIO01","designator":"1","description":"General-purpose I/O, 12-bit Analog Input (ADC1 Channel 1).","power_domain":"VDD3P3_RTC"},"sources":[{"page":21,"quote":"| 1 | GPIO01 | ADC1_CH1 | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 1). |","method":"table","fragment":"entities_header.json","table_id":"21_2"}],"attr_src":{"kind":{"page":21,"quote":"| 1 | GPIO01 | ADC1_CH1 | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 1). |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"label":{"page":21,"quote":"| 1 | GPIO01 | ADC1_CH1 | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 1). |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"number":{"via":"chip u1 GPIO1","method":"chip_link"},"chip_pin":{"page":21,"quote":"| 1 | GPIO01 | ADC1_CH1 | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 1). |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"position":{"page":21,"quote":"| 1 | GPIO01 | ADC1_CH1 | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 1). |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"gpio_name":{"page":21,"quote":"| 1 | GPIO01 | ADC1_CH1 | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 1). |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"designator":{"page":21,"quote":"| 1 | GPIO01 | ADC1_CH1 | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 1). |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"description":{"page":21,"quote":"| 1 | GPIO01 | ADC1_CH1 | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 1). |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"power_domain":{"via":"chip u1 GPIO1","method":"chip_link"}},"chip_pin":{"pin":"GPIO1","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| 1 | GPIO01 | ADC1_CH1 | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 1). |","method":"table","fragment":"functions_header.json","table_id":"21_2"},"note":"Components101 pin table (chip IO-MUX functions)","signal":"ADC1_CH1","category":"adc"},{"alt":"F0","src":{"page":20,"quote":"| 5 | GPIO1 |  | GPIO1 | … | GPIO1 | … |  |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO1","signal":"GPIO1","category":"gpio"},{"alt":"analog","src":{"page":20,"quote":"| 5 | GPIO1 |  | GPIO1 | … | GPIO1 | … |  |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO1","signal":"XTAL_32K_N","category":"clock"},{"src":{"page":20,"quote":"| 5 | GPIO1 |  | GPIO1 | … | GPIO1 | … |  |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO1","signal":"GPIO matrix (any routable peripheral signal)","category":"gpio_matrix"}],"electrical":{"ioh":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOH | High-level source current (VDD 1 = 3.3 V, VOH >= 2.64 V, PAD_DRIVER = 3) | — | 40 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.04,"via":"chip u1 GPIO1","orig":{"typ":40,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"High-level source current","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3"}],"iol":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOL | Low-level sink current (VDD 1 = 3.3 V, VOL = 0.495 V, PAD_DRIVER = 3) | — | 28 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.028,"via":"chip u1 GPIO1","orig":{"typ":28,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Low-level sink current","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3"}],"vih":[{"max":3.6,"min":2.475,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO1","unit":"V","symbol":"VIH","category":"characteristic","parameter":"High-level input voltage","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3"}],"vil":[{"max":0.825,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIL | Low-level input voltage | –0.3 | — | 1 0.25 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO1","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Low-level input voltage","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD"}],"voh":[{"min":2.64,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOH | High-level output voltage | 1 0.8 × VDD | — | — | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO1","unit":"V","symbol":"VOH","category":"characteristic","parameter":"High-level output voltage","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD"}],"vol":[{"max":0.33,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOL | Low-level output voltage | — | — | 1 0.1 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO1","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Low-level output voltage","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD"}],"pull_up":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PU | Internal weak pull-up resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO1","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Internal weak pull-up resistor","conditions":"VDD=3.3V; 25 °C"}],"pull_down":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PD | Internal weak pull-down resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO1","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Internal weak pull-down resistor","conditions":"VDD=3.3V; 25 °C"}],"io_current":[{"max":0.04,"min":0.01,"src":{"page":9,"quote":"| DC Current per I/O Pin | 10-40mA depending on total chip loading |","method":"table","fragment":"ratings_board.json","table_id":"9_1"},"via":"group:io","orig":{"max":40,"min":10,"unit":"mA"},"unit":"A","category":"operating","parameter":"DC current per I/O pin","conditions":"depending on total chip loading"}],"io_voltage":[{"src":{"page":6,"quote":"The digital I/O is limited to 3.3V. If using with 5V logic, level translators should be used.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":5e-8,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IIH | High-level input current | — | — | 50 | nA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO1","orig":{"max":50,"unit":"nA"},"unit":"A","symbol":"IIH/IIL","category":"characteristic","parameter":"High/low-level input current","conditions":"VDD=3.3V; 25 °C"}],"abs_max_voltage":[{"max":3.6,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | … | VDD 1 + 0.3 | V |; | Input power pins 1 | Allowed input voltage | –0.3 | 3.6 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO1","unit":"V","category":"absolute_max","parameter":"IO input voltage (from VIH max)","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V"}],"adc_input_range":[{"max":2.5,"min":0,"src":{"doc":"ESP32-C3 datasheet","page":56,"quote":"|  | ATTEN3, effective measurement range of 0 ~ 2500 | –35 | 35 | mV |","method":"table","fragment":"ratings_pins.json","table_id":"56_2"},"via":"chip u1 GPIO1","orig":{"max":2500,"min":0,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"ADC effective measurement range (ATTEN3)","conditions":"ADC-capable GPIO0–GPIO5 only; ATTEN3; total error ±35 mV"}],"input_capacitance":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| CIN | Pin capacitance | — | 2 | — | pF |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0,"via":"chip u1 GPIO1","orig":{"typ":2,"unit":"pF"},"unit":"F","symbol":"CIN","category":"characteristic","parameter":"Pin capacitance","conditions":"VDD=3.3V; 25 °C"}],"five_volt_tolerant":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO1","value":false,"category":"absolute_max","parameter":"5 V tolerant","conditions":"inputs limited to VDD + 0.3 V"}]},"entity_type":"pin"},{"id":"0","attrs":{"kind":"gpio","label":"0","number":4,"chip_pin":"GPIO0","position":"R8","gpio_name":"GPIO00","designator":"0","description":"General-purpose I/O, 12-bit Analog Input (ADC1 Channel 0), RTC wakeup.","power_domain":"VDD3P3_RTC"},"sources":[{"page":21,"quote":"| 0 | GPIO00 | ADC1_CH0, RTC_GPIO0 | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 0), RTC wakeup. |","method":"table","fragment":"entities_header.json","table_id":"21_2"}],"attr_src":{"kind":{"page":21,"quote":"| 0 | GPIO00 | ADC1_CH0, RTC_GPIO0 | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 0), RTC wakeup. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"label":{"page":21,"quote":"| 0 | GPIO00 | ADC1_CH0, RTC_GPIO0 | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 0), RTC wakeup. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"number":{"via":"chip u1 GPIO0","method":"chip_link"},"chip_pin":{"page":21,"quote":"| 0 | GPIO00 | ADC1_CH0, RTC_GPIO0 | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 0), RTC wakeup. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"position":{"page":21,"quote":"| 0 | GPIO00 | ADC1_CH0, RTC_GPIO0 | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 0), RTC wakeup. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"gpio_name":{"page":21,"quote":"| 0 | GPIO00 | ADC1_CH0, RTC_GPIO0 | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 0), RTC wakeup. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"designator":{"page":21,"quote":"| 0 | GPIO00 | ADC1_CH0, RTC_GPIO0 | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 0), RTC wakeup. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"description":{"page":21,"quote":"| 0 | GPIO00 | ADC1_CH0, RTC_GPIO0 | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 0), RTC wakeup. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"power_domain":{"via":"chip u1 GPIO0","method":"chip_link"}},"chip_pin":{"pin":"GPIO0","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| 0 | GPIO00 | ADC1_CH0, RTC_GPIO0 | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 0), RTC wakeup. |","method":"table","fragment":"functions_header.json","table_id":"21_2"},"note":"Components101 pin table (chip IO-MUX functions)","signal":"ADC1_CH0","category":"adc"},{"src":{"page":21,"quote":"| 0 | GPIO00 | ADC1_CH0, RTC_GPIO0 | General-purpose I/O, 12-bit Analog Input (ADC1 Channel 0), RTC wakeup. |","method":"table","fragment":"functions_header.json","table_id":"21_2"},"note":"Components101 pin table (chip IO-MUX functions)","signal":"RTC_GPIO0","category":"other"},{"alt":"F0","src":{"page":19,"quote":"| 4 | GPIO0 |  | GPIO0 | … | GPIO0 | … |  |","method":"table","fragment":"functions_iomux.json","table_id":"19_2"},"via":"chip u1 GPIO0","signal":"GPIO0","category":"gpio"},{"alt":"analog","src":{"page":19,"quote":"| 4 | GPIO0 |  | GPIO0 | … | GPIO0 | … |  |","method":"table","fragment":"functions_iomux.json","table_id":"19_2"},"via":"chip u1 GPIO0","signal":"XTAL_32K_P","category":"clock"},{"src":{"page":19,"quote":"| 4 | GPIO0 |  | GPIO0 | … | GPIO0 | … |  |","method":"table","fragment":"functions_iomux.json","table_id":"19_2"},"via":"chip u1 GPIO0","signal":"GPIO matrix (any routable peripheral signal)","category":"gpio_matrix"}],"electrical":{"ioh":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOH | High-level source current (VDD 1 = 3.3 V, VOH >= 2.64 V, PAD_DRIVER = 3) | — | 40 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.04,"via":"chip u1 GPIO0","orig":{"typ":40,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"High-level source current","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3"}],"iol":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOL | Low-level sink current (VDD 1 = 3.3 V, VOL = 0.495 V, PAD_DRIVER = 3) | — | 28 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.028,"via":"chip u1 GPIO0","orig":{"typ":28,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Low-level sink current","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3"}],"vih":[{"max":3.6,"min":2.475,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO0","unit":"V","symbol":"VIH","category":"characteristic","parameter":"High-level input voltage","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3"}],"vil":[{"max":0.825,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIL | Low-level input voltage | –0.3 | — | 1 0.25 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO0","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Low-level input voltage","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD"}],"voh":[{"min":2.64,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOH | High-level output voltage | 1 0.8 × VDD | — | — | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO0","unit":"V","symbol":"VOH","category":"characteristic","parameter":"High-level output voltage","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD"}],"vol":[{"max":0.33,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOL | Low-level output voltage | — | — | 1 0.1 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO0","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Low-level output voltage","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD"}],"pull_up":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PU | Internal weak pull-up resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO0","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Internal weak pull-up resistor","conditions":"VDD=3.3V; 25 °C"}],"pull_down":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PD | Internal weak pull-down resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO0","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Internal weak pull-down resistor","conditions":"VDD=3.3V; 25 °C"}],"io_current":[{"max":0.04,"min":0.01,"src":{"page":9,"quote":"| DC Current per I/O Pin | 10-40mA depending on total chip loading |","method":"table","fragment":"ratings_board.json","table_id":"9_1"},"via":"group:io","orig":{"max":40,"min":10,"unit":"mA"},"unit":"A","category":"operating","parameter":"DC current per I/O pin","conditions":"depending on total chip loading"}],"io_voltage":[{"src":{"page":6,"quote":"The digital I/O is limited to 3.3V. If using with 5V logic, level translators should be used.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":5e-8,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IIH | High-level input current | — | — | 50 | nA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO0","orig":{"max":50,"unit":"nA"},"unit":"A","symbol":"IIH/IIL","category":"characteristic","parameter":"High/low-level input current","conditions":"VDD=3.3V; 25 °C"}],"abs_max_voltage":[{"max":3.6,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | … | VDD 1 + 0.3 | V |; | Input power pins 1 | Allowed input voltage | –0.3 | 3.6 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO0","unit":"V","category":"absolute_max","parameter":"IO input voltage (from VIH max)","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V"}],"adc_input_range":[{"max":2.5,"min":0,"src":{"doc":"ESP32-C3 datasheet","page":56,"quote":"|  | ATTEN3, effective measurement range of 0 ~ 2500 | –35 | 35 | mV |","method":"table","fragment":"ratings_pins.json","table_id":"56_2"},"via":"chip u1 GPIO0","orig":{"max":2500,"min":0,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"ADC effective measurement range (ATTEN3)","conditions":"ADC-capable GPIO0–GPIO5 only; ATTEN3; total error ±35 mV"}],"input_capacitance":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| CIN | Pin capacitance | — | 2 | — | pF |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0,"via":"chip u1 GPIO0","orig":{"typ":2,"unit":"pF"},"unit":"F","symbol":"CIN","category":"characteristic","parameter":"Pin capacitance","conditions":"VDD=3.3V; 25 °C"}],"five_volt_tolerant":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO0","value":false,"category":"absolute_max","parameter":"5 V tolerant","conditions":"inputs limited to VDD + 0.3 V"}]},"entity_type":"pin"},{"id":"5","attrs":{"kind":"gpio","label":"5","number":10,"chip_pin":"GPIO5","position":"L1","gpio_name":"GPIO05","designator":"5","description":"General-purpose I/O, 12-bit Analog Input (ADC2 Channel 0), SPI WP.","power_domain":"VDD3P3_RTC"},"sources":[{"page":21,"quote":"| 5 | GPIO05 | ADC2_CH0, FSPI_WP, RTC_GPIO5 | General-purpose I/O, 12-bit Analog Input (ADC2 Channel 0), SPI WP. |","method":"table","fragment":"entities_header.json","table_id":"21_2"}],"attr_src":{"kind":{"page":21,"quote":"| 5 | GPIO05 | ADC2_CH0, FSPI_WP, RTC_GPIO5 | General-purpose I/O, 12-bit Analog Input (ADC2 Channel 0), SPI WP. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"label":{"page":21,"quote":"| 5 | GPIO05 | ADC2_CH0, FSPI_WP, RTC_GPIO5 | General-purpose I/O, 12-bit Analog Input (ADC2 Channel 0), SPI WP. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"number":{"via":"chip u1 GPIO5","method":"chip_link"},"chip_pin":{"page":21,"quote":"| 5 | GPIO05 | ADC2_CH0, FSPI_WP, RTC_GPIO5 | General-purpose I/O, 12-bit Analog Input (ADC2 Channel 0), SPI WP. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"position":{"page":21,"quote":"| 5 | GPIO05 | ADC2_CH0, FSPI_WP, RTC_GPIO5 | General-purpose I/O, 12-bit Analog Input (ADC2 Channel 0), SPI WP. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"gpio_name":{"page":21,"quote":"| 5 | GPIO05 | ADC2_CH0, FSPI_WP, RTC_GPIO5 | General-purpose I/O, 12-bit Analog Input (ADC2 Channel 0), SPI WP. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"designator":{"page":21,"quote":"| 5 | GPIO05 | ADC2_CH0, FSPI_WP, RTC_GPIO5 | General-purpose I/O, 12-bit Analog Input (ADC2 Channel 0), SPI WP. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"description":{"page":21,"quote":"| 5 | GPIO05 | ADC2_CH0, FSPI_WP, RTC_GPIO5 | General-purpose I/O, 12-bit Analog Input (ADC2 Channel 0), SPI WP. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"power_domain":{"via":"chip u1 GPIO5","method":"chip_link"}},"chip_pin":{"pin":"GPIO5","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":6,"quote":"There are 4 pins assigned for an SPI bus. SCK on GPIO4, MISO on GPIO5, MOSI on GPIO6 and SS (Chip Select) on GPIO7.","method":"text","fragment":"functions_arduino.json"},"signal":"MISO (Arduino default)","category":"spi"},{"src":{"page":6,"quote":"There are 4 pins assigned for an SPI bus. SCK on GPIO4, MISO on GPIO5, MOSI on GPIO6 and SS (Chip Select) on GPIO7.","method":"text","fragment":"functions_arduino.json"},"signal":"A5","category":"adc"},{"src":{"page":21,"quote":"| 5 | GPIO05 | ADC2_CH0, FSPI_WP, RTC_GPIO5 | General-purpose I/O, 12-bit Analog Input (ADC2 Channel 0), SPI WP. |","method":"table","fragment":"functions_header.json","table_id":"21_2"},"note":"Components101 pin table (chip IO-MUX functions)","signal":"ADC2_CH0","category":"adc"},{"src":{"page":21,"quote":"| 5 | GPIO05 | ADC2_CH0, FSPI_WP, RTC_GPIO5 | General-purpose I/O, 12-bit Analog Input (ADC2 Channel 0), SPI WP. |","method":"table","fragment":"functions_header.json","table_id":"21_2"},"note":"Components101 pin table (chip IO-MUX functions)","signal":"FSPI_WP","category":"spi"},{"src":{"page":21,"quote":"| 5 | GPIO05 | ADC2_CH0, FSPI_WP, RTC_GPIO5 | General-purpose I/O, 12-bit Analog Input (ADC2 Channel 0), SPI WP. |","method":"table","fragment":"functions_header.json","table_id":"21_2"},"note":"Components101 pin table (chip IO-MUX functions)","signal":"RTC_GPIO5","category":"other"},{"alt":"F0","src":{"page":20,"quote":"| 10 | GPIO5 |  | MTDI | … | GPIO5 | … | FSPIWP |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO5","signal":"MTDI","category":"jtag"},{"alt":"F1","src":{"page":20,"quote":"| 10 | GPIO5 |  | MTDI | … | GPIO5 | … | FSPIWP |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO5","signal":"GPIO5","category":"gpio"},{"src":{"page":20,"quote":"| 10 | GPIO5 |  | MTDI | … | GPIO5 | … | FSPIWP |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO5","signal":"GPIO matrix (any routable peripheral signal)","category":"gpio_matrix"}],"electrical":{"ioh":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOH | High-level source current (VDD 1 = 3.3 V, VOH >= 2.64 V, PAD_DRIVER = 3) | — | 40 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.04,"via":"chip u1 GPIO5","orig":{"typ":40,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"High-level source current","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3"}],"iol":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOL | Low-level sink current (VDD 1 = 3.3 V, VOL = 0.495 V, PAD_DRIVER = 3) | — | 28 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.028,"via":"chip u1 GPIO5","orig":{"typ":28,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Low-level sink current","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3"}],"vih":[{"max":3.6,"min":2.475,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO5","unit":"V","symbol":"VIH","category":"characteristic","parameter":"High-level input voltage","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3"}],"vil":[{"max":0.825,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIL | Low-level input voltage | –0.3 | — | 1 0.25 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO5","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Low-level input voltage","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD"}],"voh":[{"min":2.64,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOH | High-level output voltage | 1 0.8 × VDD | — | — | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO5","unit":"V","symbol":"VOH","category":"characteristic","parameter":"High-level output voltage","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD"}],"vol":[{"max":0.33,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOL | Low-level output voltage | — | — | 1 0.1 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO5","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Low-level output voltage","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD"}],"pull_up":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PU | Internal weak pull-up resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO5","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Internal weak pull-up resistor","conditions":"VDD=3.3V; 25 °C"}],"pull_down":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PD | Internal weak pull-down resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO5","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Internal weak pull-down resistor","conditions":"VDD=3.3V; 25 °C"}],"io_current":[{"max":0.04,"min":0.01,"src":{"page":9,"quote":"| DC Current per I/O Pin | 10-40mA depending on total chip loading |","method":"table","fragment":"ratings_board.json","table_id":"9_1"},"via":"group:io","orig":{"max":40,"min":10,"unit":"mA"},"unit":"A","category":"operating","parameter":"DC current per I/O pin","conditions":"depending on total chip loading"}],"io_voltage":[{"src":{"page":6,"quote":"The digital I/O is limited to 3.3V. If using with 5V logic, level translators should be used.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":5e-8,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IIH | High-level input current | — | — | 50 | nA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO5","orig":{"max":50,"unit":"nA"},"unit":"A","symbol":"IIH/IIL","category":"characteristic","parameter":"High/low-level input current","conditions":"VDD=3.3V; 25 °C"}],"abs_max_voltage":[{"max":3.6,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | … | VDD 1 + 0.3 | V |; | Input power pins 1 | Allowed input voltage | –0.3 | 3.6 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO5","unit":"V","category":"absolute_max","parameter":"IO input voltage (from VIH max)","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V"}],"adc_input_range":[{"max":2.5,"min":0,"src":{"doc":"ESP32-C3 datasheet","page":56,"quote":"|  | ATTEN3, effective measurement range of 0 ~ 2500 | –35 | 35 | mV |","method":"table","fragment":"ratings_pins.json","table_id":"56_2"},"via":"chip u1 GPIO5","orig":{"max":2500,"min":0,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"ADC effective measurement range (ATTEN3)","conditions":"ADC-capable GPIO0–GPIO5 only; ATTEN3; total error ±35 mV"}],"input_capacitance":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| CIN | Pin capacitance | — | 2 | — | pF |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0,"via":"chip u1 GPIO5","orig":{"typ":2,"unit":"pF"},"unit":"F","symbol":"CIN","category":"characteristic","parameter":"Pin capacitance","conditions":"VDD=3.3V; 25 °C"}],"five_volt_tolerant":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO5","value":false,"category":"absolute_max","parameter":"5 V tolerant","conditions":"inputs limited to VDD + 0.3 V"}]},"entity_type":"pin"},{"id":"6","attrs":{"kind":"gpio","label":"6","number":12,"chip_pin":"GPIO6","position":"L2","gpio_name":"GPIO06","designator":"6","description":"General-purpose I/O, SPI Clock line.","power_domain":"VDD3P3_CPU"},"sources":[{"page":21,"quote":"| 6 | GPIO06 | SPI2_SCK, FSPICLK | General-purpose I/O, SPI Clock line. |","method":"table","fragment":"entities_header.json","table_id":"21_2"}],"attr_src":{"kind":{"page":21,"quote":"| 6 | GPIO06 | SPI2_SCK, FSPICLK | General-purpose I/O, SPI Clock line. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"label":{"page":21,"quote":"| 6 | GPIO06 | SPI2_SCK, FSPICLK | General-purpose I/O, SPI Clock line. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"number":{"via":"chip u1 GPIO6","method":"chip_link"},"chip_pin":{"page":21,"quote":"| 6 | GPIO06 | SPI2_SCK, FSPICLK | General-purpose I/O, SPI Clock line. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"position":{"page":21,"quote":"| 6 | GPIO06 | SPI2_SCK, FSPICLK | General-purpose I/O, SPI Clock line. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"gpio_name":{"page":21,"quote":"| 6 | GPIO06 | SPI2_SCK, FSPICLK | General-purpose I/O, SPI Clock line. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"designator":{"page":21,"quote":"| 6 | GPIO06 | SPI2_SCK, FSPICLK | General-purpose I/O, SPI Clock line. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"description":{"page":21,"quote":"| 6 | GPIO06 | SPI2_SCK, FSPICLK | General-purpose I/O, SPI Clock line. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"power_domain":{"via":"chip u1 GPIO6","method":"chip_link"}},"chip_pin":{"pin":"GPIO6","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":6,"quote":"There are 4 pins assigned for an SPI bus. SCK on GPIO4, MISO on GPIO5, MOSI on GPIO6 and SS (Chip Select) on GPIO7.","method":"text","fragment":"functions_arduino.json"},"signal":"MOSI (Arduino default)","category":"spi"},{"src":{"page":21,"quote":"| 6 | GPIO06 | SPI2_SCK, FSPICLK | General-purpose I/O, SPI Clock line. |","method":"table","fragment":"functions_header.json","table_id":"21_2"},"note":"Components101 pin table (chip IO-MUX functions)","signal":"SPI2_SCK","category":"spi"},{"src":{"page":21,"quote":"| 6 | GPIO06 | SPI2_SCK, FSPICLK | General-purpose I/O, SPI Clock line. |","method":"table","fragment":"functions_header.json","table_id":"21_2"},"note":"Components101 pin table (chip IO-MUX functions)","signal":"FSPICLK","category":"spi"},{"alt":"F0","src":{"page":20,"quote":"| 12 | GPIO6 |  | MTCK | … | GPIO6 | … | FSPICLK |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO6","signal":"MTCK","category":"jtag"},{"alt":"F1","src":{"page":20,"quote":"| 12 | GPIO6 |  | MTCK | … | GPIO6 | … | FSPICLK |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO6","signal":"GPIO6","category":"gpio"},{"src":{"page":20,"quote":"| 12 | GPIO6 |  | MTCK | … | GPIO6 | … | FSPICLK |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO6","signal":"GPIO matrix (any routable peripheral signal)","category":"gpio_matrix"}],"electrical":{"ioh":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOH | High-level source current (VDD 1 = 3.3 V, VOH >= 2.64 V, PAD_DRIVER = 3) | — | 40 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.04,"via":"chip u1 GPIO6","orig":{"typ":40,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"High-level source current","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3"}],"iol":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOL | Low-level sink current (VDD 1 = 3.3 V, VOL = 0.495 V, PAD_DRIVER = 3) | — | 28 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.028,"via":"chip u1 GPIO6","orig":{"typ":28,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Low-level sink current","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3"}],"vih":[{"max":3.6,"min":2.475,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO6","unit":"V","symbol":"VIH","category":"characteristic","parameter":"High-level input voltage","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3"}],"vil":[{"max":0.825,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIL | Low-level input voltage | –0.3 | — | 1 0.25 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO6","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Low-level input voltage","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD"}],"voh":[{"min":2.64,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOH | High-level output voltage | 1 0.8 × VDD | — | — | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO6","unit":"V","symbol":"VOH","category":"characteristic","parameter":"High-level output voltage","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD"}],"vol":[{"max":0.33,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOL | Low-level output voltage | — | — | 1 0.1 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO6","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Low-level output voltage","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD"}],"pull_up":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PU | Internal weak pull-up resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO6","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Internal weak pull-up resistor","conditions":"VDD=3.3V; 25 °C"}],"pull_down":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PD | Internal weak pull-down resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO6","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Internal weak pull-down resistor","conditions":"VDD=3.3V; 25 °C"}],"io_current":[{"max":0.04,"min":0.01,"src":{"page":9,"quote":"| DC Current per I/O Pin | 10-40mA depending on total chip loading |","method":"table","fragment":"ratings_board.json","table_id":"9_1"},"via":"group:io","orig":{"max":40,"min":10,"unit":"mA"},"unit":"A","category":"operating","parameter":"DC current per I/O pin","conditions":"depending on total chip loading"}],"io_voltage":[{"src":{"page":6,"quote":"The digital I/O is limited to 3.3V. If using with 5V logic, level translators should be used.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":5e-8,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IIH | High-level input current | — | — | 50 | nA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO6","orig":{"max":50,"unit":"nA"},"unit":"A","symbol":"IIH/IIL","category":"characteristic","parameter":"High/low-level input current","conditions":"VDD=3.3V; 25 °C"}],"abs_max_voltage":[{"max":3.6,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | … | VDD 1 + 0.3 | V |; | Input power pins 1 | Allowed input voltage | –0.3 | 3.6 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO6","unit":"V","category":"absolute_max","parameter":"IO input voltage (from VIH max)","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V"}],"input_capacitance":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| CIN | Pin capacitance | — | 2 | — | pF |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0,"via":"chip u1 GPIO6","orig":{"typ":2,"unit":"pF"},"unit":"F","symbol":"CIN","category":"characteristic","parameter":"Pin capacitance","conditions":"VDD=3.3V; 25 °C"}],"five_volt_tolerant":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO6","value":false,"category":"absolute_max","parameter":"5 V tolerant","conditions":"inputs limited to VDD + 0.3 V"}]},"entity_type":"pin"},{"id":"7","attrs":{"kind":"gpio","label":"7","number":13,"chip_pin":"GPIO7","position":"L3","gpio_name":"GPIO07","designator":"7","description":"General-purpose I/O, SPI MOSI data line.","power_domain":"VDD3P3_CPU"},"sources":[{"page":21,"quote":"| 7 | GPIO07 | SPI2_MOSI, FSPID | General-purpose I/O, SPI MOSI data line. |","method":"table","fragment":"entities_header.json","table_id":"21_2"}],"attr_src":{"kind":{"page":21,"quote":"| 7 | GPIO07 | SPI2_MOSI, FSPID | General-purpose I/O, SPI MOSI data line. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"label":{"page":21,"quote":"| 7 | GPIO07 | SPI2_MOSI, FSPID | General-purpose I/O, SPI MOSI data line. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"number":{"via":"chip u1 GPIO7","method":"chip_link"},"chip_pin":{"page":21,"quote":"| 7 | GPIO07 | SPI2_MOSI, FSPID | General-purpose I/O, SPI MOSI data line. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"position":{"page":21,"quote":"| 7 | GPIO07 | SPI2_MOSI, FSPID | General-purpose I/O, SPI MOSI data line. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"gpio_name":{"page":21,"quote":"| 7 | GPIO07 | SPI2_MOSI, FSPID | General-purpose I/O, SPI MOSI data line. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"designator":{"page":21,"quote":"| 7 | GPIO07 | SPI2_MOSI, FSPID | General-purpose I/O, SPI MOSI data line. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"description":{"page":21,"quote":"| 7 | GPIO07 | SPI2_MOSI, FSPID | General-purpose I/O, SPI MOSI data line. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"power_domain":{"via":"chip u1 GPIO7","method":"chip_link"}},"chip_pin":{"pin":"GPIO7","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":6,"quote":"There are 4 pins assigned for an SPI bus. SCK on GPIO4, MISO on GPIO5, MOSI on GPIO6 and SS (Chip Select) on GPIO7.","method":"text","fragment":"functions_arduino.json"},"signal":"SS (Arduino default)","category":"spi"},{"src":{"page":21,"quote":"| 7 | GPIO07 | SPI2_MOSI, FSPID | General-purpose I/O, SPI MOSI data line. |","method":"table","fragment":"functions_header.json","table_id":"21_2"},"note":"Components101 pin table (chip IO-MUX functions)","signal":"SPI2_MOSI","category":"spi"},{"src":{"page":21,"quote":"| 7 | GPIO07 | SPI2_MOSI, FSPID | General-purpose I/O, SPI MOSI data line. |","method":"table","fragment":"functions_header.json","table_id":"21_2"},"note":"Components101 pin table (chip IO-MUX functions)","signal":"FSPID","category":"spi"},{"alt":"F0","src":{"page":20,"quote":"| 13 | GPIO7 |  | MTDO | … | GPIO7 | … | FSPID |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO7","signal":"MTDO","category":"jtag"},{"alt":"F1","src":{"page":20,"quote":"| 13 | GPIO7 |  | MTDO | … | GPIO7 | … | FSPID |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO7","signal":"GPIO7","category":"gpio"},{"src":{"page":20,"quote":"| 13 | GPIO7 |  | MTDO | … | GPIO7 | … | FSPID |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO7","signal":"GPIO matrix (any routable peripheral signal)","category":"gpio_matrix"}],"electrical":{"ioh":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOH | High-level source current (VDD 1 = 3.3 V, VOH >= 2.64 V, PAD_DRIVER = 3) | — | 40 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.04,"via":"chip u1 GPIO7","orig":{"typ":40,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"High-level source current","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3"}],"iol":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOL | Low-level sink current (VDD 1 = 3.3 V, VOL = 0.495 V, PAD_DRIVER = 3) | — | 28 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.028,"via":"chip u1 GPIO7","orig":{"typ":28,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Low-level sink current","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3"}],"vih":[{"max":3.6,"min":2.475,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO7","unit":"V","symbol":"VIH","category":"characteristic","parameter":"High-level input voltage","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3"}],"vil":[{"max":0.825,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIL | Low-level input voltage | –0.3 | — | 1 0.25 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO7","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Low-level input voltage","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD"}],"voh":[{"min":2.64,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOH | High-level output voltage | 1 0.8 × VDD | — | — | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO7","unit":"V","symbol":"VOH","category":"characteristic","parameter":"High-level output voltage","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD"}],"vol":[{"max":0.33,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOL | Low-level output voltage | — | — | 1 0.1 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO7","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Low-level output voltage","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD"}],"pull_up":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PU | Internal weak pull-up resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO7","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Internal weak pull-up resistor","conditions":"VDD=3.3V; 25 °C"}],"pull_down":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PD | Internal weak pull-down resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO7","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Internal weak pull-down resistor","conditions":"VDD=3.3V; 25 °C"}],"io_current":[{"max":0.04,"min":0.01,"src":{"page":9,"quote":"| DC Current per I/O Pin | 10-40mA depending on total chip loading |","method":"table","fragment":"ratings_board.json","table_id":"9_1"},"via":"group:io","orig":{"max":40,"min":10,"unit":"mA"},"unit":"A","category":"operating","parameter":"DC current per I/O pin","conditions":"depending on total chip loading"}],"io_voltage":[{"src":{"page":6,"quote":"The digital I/O is limited to 3.3V. If using with 5V logic, level translators should be used.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":5e-8,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IIH | High-level input current | — | — | 50 | nA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO7","orig":{"max":50,"unit":"nA"},"unit":"A","symbol":"IIH/IIL","category":"characteristic","parameter":"High/low-level input current","conditions":"VDD=3.3V; 25 °C"}],"abs_max_voltage":[{"max":3.6,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | … | VDD 1 + 0.3 | V |; | Input power pins 1 | Allowed input voltage | –0.3 | 3.6 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO7","unit":"V","category":"absolute_max","parameter":"IO input voltage (from VIH max)","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V"}],"input_capacitance":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| CIN | Pin capacitance | — | 2 | — | pF |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0,"via":"chip u1 GPIO7","orig":{"typ":2,"unit":"pF"},"unit":"F","symbol":"CIN","category":"characteristic","parameter":"Pin capacitance","conditions":"VDD=3.3V; 25 °C"}],"five_volt_tolerant":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO7","value":false,"category":"absolute_max","parameter":"5 V tolerant","conditions":"inputs limited to VDD + 0.3 V"}]},"entity_type":"pin"},{"id":"8","attrs":{"kind":"gpio","label":"8","number":14,"chip_pin":"GPIO8","position":"L4","gpio_name":"GPIO08","designator":"8","description":"Connected to onboard blue/green User LED (Active LOW). Strapping pin.","power_domain":"VDD3P3_CPU"},"sources":[{"page":21,"quote":"| 8 | GPIO08 | LED_BUILTIN, Strapping | Connected to onboard blue/green User LED (Active LOW). Strapping pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"}],"attr_src":{"kind":{"page":21,"quote":"| 8 | GPIO08 | LED_BUILTIN, Strapping | Connected to onboard blue/green User LED (Active LOW). Strapping pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"label":{"page":21,"quote":"| 8 | GPIO08 | LED_BUILTIN, Strapping | Connected to onboard blue/green User LED (Active LOW). Strapping pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"number":{"via":"chip u1 GPIO8","method":"chip_link"},"chip_pin":{"page":21,"quote":"| 8 | GPIO08 | LED_BUILTIN, Strapping | Connected to onboard blue/green User LED (Active LOW). Strapping pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"position":{"page":21,"quote":"| 8 | GPIO08 | LED_BUILTIN, Strapping | Connected to onboard blue/green User LED (Active LOW). Strapping pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"gpio_name":{"page":21,"quote":"| 8 | GPIO08 | LED_BUILTIN, Strapping | Connected to onboard blue/green User LED (Active LOW). Strapping pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"designator":{"page":21,"quote":"| 8 | GPIO08 | LED_BUILTIN, Strapping | Connected to onboard blue/green User LED (Active LOW). Strapping pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"description":{"page":21,"quote":"| 8 | GPIO08 | LED_BUILTIN, Strapping | Connected to onboard blue/green User LED (Active LOW). Strapping pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"power_domain":{"via":"chip u1 GPIO8","method":"chip_link"}},"chip_pin":{"pin":"GPIO8","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":6,"quote":"The module brings out one I2C port. The default configuration has SDA on GPIO8 and SCL on GPIO9. The I2C functionality can be multiplexed to other pins.","method":"text","fragment":"functions_arduino.json"},"signal":"SDA (Arduino default)","category":"i2c"},{"src":{"page":6,"quote":"The module brings out one I2C port. The default configuration has SDA on GPIO8 and SCL on GPIO9. The I2C functionality can be multiplexed to other pins.","method":"text","fragment":"functions_arduino.json"},"signal":"blue user LED","category":"led"},{"src":{"page":21,"quote":"| 8 | GPIO08 | LED_BUILTIN, Strapping | Connected to onboard blue/green User LED (Active LOW). Strapping pin. |","method":"table","fragment":"functions_header.json","table_id":"21_2"},"note":"Components101 pin table (chip IO-MUX functions)","signal":"LED_BUILTIN","category":"led"},{"src":{"page":21,"quote":"| 8 | GPIO08 | LED_BUILTIN, Strapping | Connected to onboard blue/green User LED (Active LOW). Strapping pin. |","method":"table","fragment":"functions_header.json","table_id":"21_2"},"note":"Components101 pin table (chip IO-MUX functions)","signal":"Strapping","category":"control"},{"alt":"F0","src":{"page":20,"quote":"| 14 | GPIO8 |  | GPIO8 | … | GPIO8 | … |  |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO8","signal":"GPIO8","category":"gpio"},{"src":{"page":20,"quote":"| 14 | GPIO8 |  | GPIO8 | … | GPIO8 | … |  |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO8","signal":"GPIO matrix (any routable peripheral signal)","category":"gpio_matrix"}],"electrical":{"ioh":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOH | High-level source current (VDD 1 = 3.3 V, VOH >= 2.64 V, PAD_DRIVER = 3) | — | 40 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.04,"via":"chip u1 GPIO8","orig":{"typ":40,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"High-level source current","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3"}],"iol":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOL | Low-level sink current (VDD 1 = 3.3 V, VOL = 0.495 V, PAD_DRIVER = 3) | — | 28 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.028,"via":"chip u1 GPIO8","orig":{"typ":28,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Low-level sink current","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3"}],"vih":[{"max":3.6,"min":2.475,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO8","unit":"V","symbol":"VIH","category":"characteristic","parameter":"High-level input voltage","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3"}],"vil":[{"max":0.825,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIL | Low-level input voltage | –0.3 | — | 1 0.25 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO8","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Low-level input voltage","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD"}],"voh":[{"min":2.64,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOH | High-level output voltage | 1 0.8 × VDD | — | — | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO8","unit":"V","symbol":"VOH","category":"characteristic","parameter":"High-level output voltage","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD"}],"vol":[{"max":0.33,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOL | Low-level output voltage | — | — | 1 0.1 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO8","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Low-level output voltage","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD"}],"pull_up":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PU | Internal weak pull-up resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO8","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Internal weak pull-up resistor","conditions":"VDD=3.3V; 25 °C"}],"pull_down":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PD | Internal weak pull-down resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO8","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Internal weak pull-down resistor","conditions":"VDD=3.3V; 25 °C"}],"io_current":[{"max":0.04,"min":0.01,"src":{"page":9,"quote":"| DC Current per I/O Pin | 10-40mA depending on total chip loading |","method":"table","fragment":"ratings_board.json","table_id":"9_1"},"via":"group:io","orig":{"max":40,"min":10,"unit":"mA"},"unit":"A","category":"operating","parameter":"DC current per I/O pin","conditions":"depending on total chip loading"}],"io_voltage":[{"src":{"page":6,"quote":"The digital I/O is limited to 3.3V. If using with 5V logic, level translators should be used.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":5e-8,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IIH | High-level input current | — | — | 50 | nA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO8","orig":{"max":50,"unit":"nA"},"unit":"A","symbol":"IIH/IIL","category":"characteristic","parameter":"High/low-level input current","conditions":"VDD=3.3V; 25 °C"}],"boot_strapping":[{"src":{"doc":"ESP32-C3 datasheet","page":30,"quote":"| Strapping Pin | Default Configuration | Bit Value | GPIO2 | Floating | GPIO8 | Floating | GPIO9 | Weak pull-up | 1 |","method":"derived","fragment":"ratings_pins.json","table_id":"30_1"},"via":"chip u1 GPIO8","value":true,"category":"characteristic","parameter":"Strapping pin (boot mode selection)","conditions":"GPIO2 floating, GPIO8 floating, GPIO9 weak pull-up by default; sampled at CHIP_EN rising, hold 3 ms"}],"abs_max_voltage":[{"max":3.6,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | … | VDD 1 + 0.3 | V |; | Input power pins 1 | Allowed input voltage | –0.3 | 3.6 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO8","unit":"V","category":"absolute_max","parameter":"IO input voltage (from VIH max)","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V"}],"input_capacitance":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| CIN | Pin capacitance | — | 2 | — | pF |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0,"via":"chip u1 GPIO8","orig":{"typ":2,"unit":"pF"},"unit":"F","symbol":"CIN","category":"characteristic","parameter":"Pin capacitance","conditions":"VDD=3.3V; 25 °C"}],"five_volt_tolerant":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO8","value":false,"category":"absolute_max","parameter":"5 V tolerant","conditions":"inputs limited to VDD + 0.3 V"}]},"entity_type":"pin"},{"id":"9","attrs":{"kind":"gpio","label":"9","number":15,"chip_pin":"GPIO9","position":"L5","gpio_name":"GPIO09","designator":"9","description":"Connected to onboard BOOT tactile switch (Active LOW). Strapping pin.","power_domain":"VDD3P3_CPU"},"sources":[{"page":21,"quote":"| 9 | GPIO09 | BOOT Button, Strapping | Connected to onboard BOOT tactile switch (Active LOW). Strapping pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"}],"attr_src":{"kind":{"page":21,"quote":"| 9 | GPIO09 | BOOT Button, Strapping | Connected to onboard BOOT tactile switch (Active LOW). Strapping pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"label":{"page":21,"quote":"| 9 | GPIO09 | BOOT Button, Strapping | Connected to onboard BOOT tactile switch (Active LOW). Strapping pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"number":{"via":"chip u1 GPIO9","method":"chip_link"},"chip_pin":{"page":21,"quote":"| 9 | GPIO09 | BOOT Button, Strapping | Connected to onboard BOOT tactile switch (Active LOW). Strapping pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"position":{"page":21,"quote":"| 9 | GPIO09 | BOOT Button, Strapping | Connected to onboard BOOT tactile switch (Active LOW). Strapping pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"gpio_name":{"page":21,"quote":"| 9 | GPIO09 | BOOT Button, Strapping | Connected to onboard BOOT tactile switch (Active LOW). Strapping pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"designator":{"page":21,"quote":"| 9 | GPIO09 | BOOT Button, Strapping | Connected to onboard BOOT tactile switch (Active LOW). Strapping pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"description":{"page":21,"quote":"| 9 | GPIO09 | BOOT Button, Strapping | Connected to onboard BOOT tactile switch (Active LOW). Strapping pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"power_domain":{"via":"chip u1 GPIO9","method":"chip_link"}},"chip_pin":{"pin":"GPIO9","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":6,"quote":"The module brings out one I2C port. The default configuration has SDA on GPIO8 and SCL on GPIO9. The I2C functionality can be multiplexed to other pins.","method":"text","fragment":"functions_arduino.json"},"signal":"SCL (Arduino default)","category":"i2c"},{"src":{"page":21,"quote":"| 9 | GPIO09 | BOOT Button, Strapping | Connected to onboard BOOT tactile switch (Active LOW). Strapping pin. |","method":"table","fragment":"functions_header.json","table_id":"21_2"},"note":"Components101 pin table (chip IO-MUX functions)","signal":"BOOT Button","category":"control"},{"src":{"page":21,"quote":"| 9 | GPIO09 | BOOT Button, Strapping | Connected to onboard BOOT tactile switch (Active LOW). Strapping pin. |","method":"table","fragment":"functions_header.json","table_id":"21_2"},"note":"Components101 pin table (chip IO-MUX functions)","signal":"Strapping","category":"control"},{"alt":"F0","src":{"page":20,"quote":"| 15 | GPIO9 |  | GPIO9 | … | GPIO9 | … |  |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO9","signal":"GPIO9","category":"gpio"},{"src":{"page":20,"quote":"| 15 | GPIO9 |  | GPIO9 | … | GPIO9 | … |  |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO9","signal":"GPIO matrix (any routable peripheral signal)","category":"gpio_matrix"}],"electrical":{"ioh":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOH | High-level source current (VDD 1 = 3.3 V, VOH >= 2.64 V, PAD_DRIVER = 3) | — | 40 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.04,"via":"chip u1 GPIO9","orig":{"typ":40,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"High-level source current","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3"}],"iol":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOL | Low-level sink current (VDD 1 = 3.3 V, VOL = 0.495 V, PAD_DRIVER = 3) | — | 28 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.028,"via":"chip u1 GPIO9","orig":{"typ":28,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Low-level sink current","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3"}],"vih":[{"max":3.6,"min":2.475,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO9","unit":"V","symbol":"VIH","category":"characteristic","parameter":"High-level input voltage","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3"}],"vil":[{"max":0.825,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIL | Low-level input voltage | –0.3 | — | 1 0.25 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO9","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Low-level input voltage","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD"}],"voh":[{"min":2.64,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOH | High-level output voltage | 1 0.8 × VDD | — | — | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO9","unit":"V","symbol":"VOH","category":"characteristic","parameter":"High-level output voltage","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD"}],"vol":[{"max":0.33,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOL | Low-level output voltage | — | — | 1 0.1 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO9","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Low-level output voltage","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD"}],"pull_up":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PU | Internal weak pull-up resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO9","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Internal weak pull-up resistor","conditions":"VDD=3.3V; 25 °C"}],"pull_down":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PD | Internal weak pull-down resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO9","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Internal weak pull-down resistor","conditions":"VDD=3.3V; 25 °C"}],"io_current":[{"max":0.04,"min":0.01,"src":{"page":9,"quote":"| DC Current per I/O Pin | 10-40mA depending on total chip loading |","method":"table","fragment":"ratings_board.json","table_id":"9_1"},"via":"group:io","orig":{"max":40,"min":10,"unit":"mA"},"unit":"A","category":"operating","parameter":"DC current per I/O pin","conditions":"depending on total chip loading"}],"io_voltage":[{"src":{"page":6,"quote":"The digital I/O is limited to 3.3V. If using with 5V logic, level translators should be used.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":5e-8,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IIH | High-level input current | — | — | 50 | nA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO9","orig":{"max":50,"unit":"nA"},"unit":"A","symbol":"IIH/IIL","category":"characteristic","parameter":"High/low-level input current","conditions":"VDD=3.3V; 25 °C"}],"boot_strapping":[{"src":{"doc":"ESP32-C3 datasheet","page":30,"quote":"| Strapping Pin | Default Configuration | Bit Value | GPIO2 | Floating | GPIO8 | Floating | GPIO9 | Weak pull-up | 1 |","method":"derived","fragment":"ratings_pins.json","table_id":"30_1"},"via":"chip u1 GPIO9","value":true,"category":"characteristic","parameter":"Strapping pin (boot mode selection)","conditions":"GPIO2 floating, GPIO8 floating, GPIO9 weak pull-up by default; sampled at CHIP_EN rising, hold 3 ms"}],"abs_max_voltage":[{"max":3.6,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | … | VDD 1 + 0.3 | V |; | Input power pins 1 | Allowed input voltage | –0.3 | 3.6 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO9","unit":"V","category":"absolute_max","parameter":"IO input voltage (from VIH max)","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V"}],"input_capacitance":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| CIN | Pin capacitance | — | 2 | — | pF |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0,"via":"chip u1 GPIO9","orig":{"typ":2,"unit":"pF"},"unit":"F","symbol":"CIN","category":"characteristic","parameter":"Pin capacitance","conditions":"VDD=3.3V; 25 °C"}],"five_volt_tolerant":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO9","value":false,"category":"absolute_max","parameter":"5 V tolerant","conditions":"inputs limited to VDD + 0.3 V"}]},"entity_type":"pin"},{"id":"10","attrs":{"kind":"gpio","label":"10","number":16,"chip_pin":"GPIO10","position":"L6","gpio_name":"GPIO10","designator":"10","description":"General-purpose I/O, SPI Chip Select line.","power_domain":"VDD3P3_CPU"},"sources":[{"page":21,"quote":"| 10 | GPIO10 | SPI2_CS, FSPICS0 | General-purpose I/O, SPI Chip Select line. |","method":"table","fragment":"entities_header.json","table_id":"21_2"}],"attr_src":{"kind":{"page":21,"quote":"| 10 | GPIO10 | SPI2_CS, FSPICS0 | General-purpose I/O, SPI Chip Select line. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"label":{"page":21,"quote":"| 10 | GPIO10 | SPI2_CS, FSPICS0 | General-purpose I/O, SPI Chip Select line. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"number":{"via":"chip u1 GPIO10","method":"chip_link"},"chip_pin":{"page":21,"quote":"| 10 | GPIO10 | SPI2_CS, FSPICS0 | General-purpose I/O, SPI Chip Select line. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"position":{"page":21,"quote":"| 10 | GPIO10 | SPI2_CS, FSPICS0 | General-purpose I/O, SPI Chip Select line. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"gpio_name":{"page":21,"quote":"| 10 | GPIO10 | SPI2_CS, FSPICS0 | General-purpose I/O, SPI Chip Select line. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"designator":{"page":21,"quote":"| 10 | GPIO10 | SPI2_CS, FSPICS0 | General-purpose I/O, SPI Chip Select line. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"description":{"page":21,"quote":"| 10 | GPIO10 | SPI2_CS, FSPICS0 | General-purpose I/O, SPI Chip Select line. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"power_domain":{"via":"chip u1 GPIO10","method":"chip_link"}},"chip_pin":{"pin":"GPIO10","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| 10 | GPIO10 | SPI2_CS, FSPICS0 | General-purpose I/O, SPI Chip Select line. |","method":"table","fragment":"functions_header.json","table_id":"21_2"},"note":"Components101 pin table (chip IO-MUX functions)","signal":"SPI2_CS","category":"spi"},{"src":{"page":21,"quote":"| 10 | GPIO10 | SPI2_CS, FSPICS0 | General-purpose I/O, SPI Chip Select line. |","method":"table","fragment":"functions_header.json","table_id":"21_2"},"note":"Components101 pin table (chip IO-MUX functions)","signal":"FSPICS0","category":"spi"},{"alt":"F0","src":{"page":20,"quote":"| 16 | GPIO10 |  | GPIO10 | … | GPIO10 | … | FSPICS0 |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO10","signal":"GPIO10","category":"gpio"},{"src":{"page":20,"quote":"| 16 | GPIO10 |  | GPIO10 | … | GPIO10 | … | FSPICS0 |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO10","signal":"GPIO matrix (any routable peripheral signal)","category":"gpio_matrix"}],"electrical":{"ioh":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOH | High-level source current (VDD 1 = 3.3 V, VOH >= 2.64 V, PAD_DRIVER = 3) | — | 40 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.04,"via":"chip u1 GPIO10","orig":{"typ":40,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"High-level source current","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3"}],"iol":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOL | Low-level sink current (VDD 1 = 3.3 V, VOL = 0.495 V, PAD_DRIVER = 3) | — | 28 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.028,"via":"chip u1 GPIO10","orig":{"typ":28,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Low-level sink current","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3"}],"vih":[{"max":3.6,"min":2.475,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO10","unit":"V","symbol":"VIH","category":"characteristic","parameter":"High-level input voltage","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3"}],"vil":[{"max":0.825,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIL | Low-level input voltage | –0.3 | — | 1 0.25 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO10","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Low-level input voltage","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD"}],"voh":[{"min":2.64,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOH | High-level output voltage | 1 0.8 × VDD | — | — | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO10","unit":"V","symbol":"VOH","category":"characteristic","parameter":"High-level output voltage","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD"}],"vol":[{"max":0.33,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOL | Low-level output voltage | — | — | 1 0.1 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO10","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Low-level output voltage","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD"}],"pull_up":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PU | Internal weak pull-up resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO10","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Internal weak pull-up resistor","conditions":"VDD=3.3V; 25 °C"}],"pull_down":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PD | Internal weak pull-down resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO10","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Internal weak pull-down resistor","conditions":"VDD=3.3V; 25 °C"}],"io_current":[{"max":0.04,"min":0.01,"src":{"page":9,"quote":"| DC Current per I/O Pin | 10-40mA depending on total chip loading |","method":"table","fragment":"ratings_board.json","table_id":"9_1"},"via":"group:io","orig":{"max":40,"min":10,"unit":"mA"},"unit":"A","category":"operating","parameter":"DC current per I/O pin","conditions":"depending on total chip loading"}],"io_voltage":[{"src":{"page":6,"quote":"The digital I/O is limited to 3.3V. If using with 5V logic, level translators should be used.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":5e-8,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IIH | High-level input current | — | — | 50 | nA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO10","orig":{"max":50,"unit":"nA"},"unit":"A","symbol":"IIH/IIL","category":"characteristic","parameter":"High/low-level input current","conditions":"VDD=3.3V; 25 °C"}],"abs_max_voltage":[{"max":3.6,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | … | VDD 1 + 0.3 | V |; | Input power pins 1 | Allowed input voltage | –0.3 | 3.6 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO10","unit":"V","category":"absolute_max","parameter":"IO input voltage (from VIH max)","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V"}],"input_capacitance":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| CIN | Pin capacitance | — | 2 | — | pF |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0,"via":"chip u1 GPIO10","orig":{"typ":2,"unit":"pF"},"unit":"F","symbol":"CIN","category":"characteristic","parameter":"Pin capacitance","conditions":"VDD=3.3V; 25 °C"}],"five_volt_tolerant":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO10","value":false,"category":"absolute_max","parameter":"5 V tolerant","conditions":"inputs limited to VDD + 0.3 V"}]},"entity_type":"pin"},{"id":"20","attrs":{"kind":"gpio","label":"20","number":27,"chip_pin":"GPIO20","position":"L7","gpio_name":"GPIO20","designator":"20","description":"Hardware UART0 Receive (RX) pin.","power_domain":"VDD3P3_CPU"},"sources":[{"page":21,"quote":"| 20 | GPIO20 | U0_RXD | Hardware UART0 Receive (RX) pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"}],"attr_src":{"kind":{"page":21,"quote":"| 20 | GPIO20 | U0_RXD | Hardware UART0 Receive (RX) pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"label":{"page":21,"quote":"| 20 | GPIO20 | U0_RXD | Hardware UART0 Receive (RX) pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"number":{"via":"chip u1 GPIO20","method":"chip_link"},"chip_pin":{"page":21,"quote":"| 20 | GPIO20 | U0_RXD | Hardware UART0 Receive (RX) pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"position":{"page":21,"quote":"| 20 | GPIO20 | U0_RXD | Hardware UART0 Receive (RX) pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"gpio_name":{"page":21,"quote":"| 20 | GPIO20 | U0_RXD | Hardware UART0 Receive (RX) pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"designator":{"page":21,"quote":"| 20 | GPIO20 | U0_RXD | Hardware UART0 Receive (RX) pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"description":{"page":21,"quote":"| 20 | GPIO20 | U0_RXD | Hardware UART0 Receive (RX) pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"power_domain":{"via":"chip u1 GPIO20","method":"chip_link"}},"chip_pin":{"pin":"GPIO20","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":6,"quote":"The module brings out 1 serial port. The default configuration has RX on GPIO20 and TX on GPIO21. The serial functionality can be multiplexed to other pins.","method":"text","fragment":"functions_arduino.json"},"signal":"RX (Serial default)","category":"uart"},{"src":{"page":21,"quote":"| 20 | GPIO20 | U0_RXD | Hardware UART0 Receive (RX) pin. |","method":"table","fragment":"functions_header.json","table_id":"21_2"},"note":"Components101 pin table (chip IO-MUX functions)","signal":"U0_RXD","category":"uart"},{"alt":"F1","src":{"page":20,"quote":"| 27 | GPIO20 |  | U0RXD | … | GPIO20 | … |  |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO20","signal":"GPIO20","category":"gpio"},{"src":{"page":20,"quote":"| 27 | GPIO20 |  | U0RXD | … | GPIO20 | … |  |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO20","signal":"GPIO matrix (any routable peripheral signal)","category":"gpio_matrix"}],"electrical":{"ioh":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOH | High-level source current (VDD 1 = 3.3 V, VOH >= 2.64 V, PAD_DRIVER = 3) | — | 40 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.04,"via":"chip u1 GPIO20","orig":{"typ":40,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"High-level source current","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3"}],"iol":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOL | Low-level sink current (VDD 1 = 3.3 V, VOL = 0.495 V, PAD_DRIVER = 3) | — | 28 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.028,"via":"chip u1 GPIO20","orig":{"typ":28,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Low-level sink current","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3"}],"vih":[{"max":3.6,"min":2.475,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO20","unit":"V","symbol":"VIH","category":"characteristic","parameter":"High-level input voltage","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3"}],"vil":[{"max":0.825,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIL | Low-level input voltage | –0.3 | — | 1 0.25 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO20","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Low-level input voltage","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD"}],"voh":[{"min":2.64,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOH | High-level output voltage | 1 0.8 × VDD | — | — | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO20","unit":"V","symbol":"VOH","category":"characteristic","parameter":"High-level output voltage","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD"}],"vol":[{"max":0.33,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOL | Low-level output voltage | — | — | 1 0.1 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO20","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Low-level output voltage","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD"}],"pull_up":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PU | Internal weak pull-up resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO20","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Internal weak pull-up resistor","conditions":"VDD=3.3V; 25 °C"}],"pull_down":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PD | Internal weak pull-down resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO20","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Internal weak pull-down resistor","conditions":"VDD=3.3V; 25 °C"}],"io_current":[{"max":0.04,"min":0.01,"src":{"page":9,"quote":"| DC Current per I/O Pin | 10-40mA depending on total chip loading |","method":"table","fragment":"ratings_board.json","table_id":"9_1"},"via":"group:io","orig":{"max":40,"min":10,"unit":"mA"},"unit":"A","category":"operating","parameter":"DC current per I/O pin","conditions":"depending on total chip loading"}],"io_voltage":[{"src":{"page":6,"quote":"The digital I/O is limited to 3.3V. If using with 5V logic, level translators should be used.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":5e-8,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IIH | High-level input current | — | — | 50 | nA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO20","orig":{"max":50,"unit":"nA"},"unit":"A","symbol":"IIH/IIL","category":"characteristic","parameter":"High/low-level input current","conditions":"VDD=3.3V; 25 °C"}],"abs_max_voltage":[{"max":3.6,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | … | VDD 1 + 0.3 | V |; | Input power pins 1 | Allowed input voltage | –0.3 | 3.6 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO20","unit":"V","category":"absolute_max","parameter":"IO input voltage (from VIH max)","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V"}],"input_capacitance":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| CIN | Pin capacitance | — | 2 | — | pF |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0,"via":"chip u1 GPIO20","orig":{"typ":2,"unit":"pF"},"unit":"F","symbol":"CIN","category":"characteristic","parameter":"Pin capacitance","conditions":"VDD=3.3V; 25 °C"}],"five_volt_tolerant":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO20","value":false,"category":"absolute_max","parameter":"5 V tolerant","conditions":"inputs limited to VDD + 0.3 V"}]},"entity_type":"pin"},{"id":"21","attrs":{"kind":"gpio","label":"21","number":28,"chip_pin":"GPIO21","position":"L8","gpio_name":"GPIO21","designator":"21","description":"Hardware UART0 Transmit (TX) pin.","power_domain":"VDD3P3_CPU"},"sources":[{"page":21,"quote":"| 21 | GPIO21 | U0_TXD | Hardware UART0 Transmit (TX) pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"}],"attr_src":{"kind":{"page":21,"quote":"| 21 | GPIO21 | U0_TXD | Hardware UART0 Transmit (TX) pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"label":{"page":21,"quote":"| 21 | GPIO21 | U0_TXD | Hardware UART0 Transmit (TX) pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"number":{"via":"chip u1 GPIO21","method":"chip_link"},"chip_pin":{"page":21,"quote":"| 21 | GPIO21 | U0_TXD | Hardware UART0 Transmit (TX) pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"position":{"page":21,"quote":"| 21 | GPIO21 | U0_TXD | Hardware UART0 Transmit (TX) pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"gpio_name":{"page":21,"quote":"| 21 | GPIO21 | U0_TXD | Hardware UART0 Transmit (TX) pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"designator":{"page":21,"quote":"| 21 | GPIO21 | U0_TXD | Hardware UART0 Transmit (TX) pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"description":{"page":21,"quote":"| 21 | GPIO21 | U0_TXD | Hardware UART0 Transmit (TX) pin. |","method":"table","fragment":"entities_header.json","table_id":"21_2"},"power_domain":{"via":"chip u1 GPIO21","method":"chip_link"}},"chip_pin":{"pin":"GPIO21","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":6,"quote":"The module brings out 1 serial port. The default configuration has RX on GPIO20 and TX on GPIO21. The serial functionality can be multiplexed to other pins.","method":"text","fragment":"functions_arduino.json"},"signal":"TX (Serial default)","category":"uart"},{"src":{"page":21,"quote":"| 21 | GPIO21 | U0_TXD | Hardware UART0 Transmit (TX) pin. |","method":"table","fragment":"functions_header.json","table_id":"21_2"},"note":"Components101 pin table (chip IO-MUX functions)","signal":"U0_TXD","category":"uart"},{"alt":"F1","src":{"page":20,"quote":"| 28 | GPIO21 |  | U0TXD | … | GPIO21 | … |  |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO21","signal":"GPIO21","category":"gpio"},{"src":{"page":20,"quote":"| 28 | GPIO21 |  | U0TXD | … | GPIO21 | … |  |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO21","signal":"GPIO matrix (any routable peripheral signal)","category":"gpio_matrix"}],"electrical":{"ioh":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOH | High-level source current (VDD 1 = 3.3 V, VOH >= 2.64 V, PAD_DRIVER = 3) | — | 40 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.04,"via":"chip u1 GPIO21","orig":{"typ":40,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"High-level source current","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3"}],"iol":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOL | Low-level sink current (VDD 1 = 3.3 V, VOL = 0.495 V, PAD_DRIVER = 3) | — | 28 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.028,"via":"chip u1 GPIO21","orig":{"typ":28,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Low-level sink current","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3"}],"vih":[{"max":3.6,"min":2.475,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO21","unit":"V","symbol":"VIH","category":"characteristic","parameter":"High-level input voltage","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3"}],"vil":[{"max":0.825,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIL | Low-level input voltage | –0.3 | — | 1 0.25 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO21","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Low-level input voltage","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD"}],"voh":[{"min":2.64,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOH | High-level output voltage | 1 0.8 × VDD | — | — | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO21","unit":"V","symbol":"VOH","category":"characteristic","parameter":"High-level output voltage","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD"}],"vol":[{"max":0.33,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOL | Low-level output voltage | — | — | 1 0.1 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO21","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Low-level output voltage","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD"}],"pull_up":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PU | Internal weak pull-up resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO21","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Internal weak pull-up resistor","conditions":"VDD=3.3V; 25 °C"}],"pull_down":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PD | Internal weak pull-down resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO21","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Internal weak pull-down resistor","conditions":"VDD=3.3V; 25 °C"}],"io_current":[{"max":0.04,"min":0.01,"src":{"page":9,"quote":"| DC Current per I/O Pin | 10-40mA depending on total chip loading |","method":"table","fragment":"ratings_board.json","table_id":"9_1"},"via":"group:io","orig":{"max":40,"min":10,"unit":"mA"},"unit":"A","category":"operating","parameter":"DC current per I/O pin","conditions":"depending on total chip loading"}],"io_voltage":[{"src":{"page":6,"quote":"The digital I/O is limited to 3.3V. If using with 5V logic, level translators should be used.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level"}],"input_leakage":[{"max":5e-8,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IIH | High-level input current | — | — | 50 | nA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO21","orig":{"max":50,"unit":"nA"},"unit":"A","symbol":"IIH/IIL","category":"characteristic","parameter":"High/low-level input current","conditions":"VDD=3.3V; 25 °C"}],"abs_max_voltage":[{"max":3.6,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | … | VDD 1 + 0.3 | V |; | Input power pins 1 | Allowed input voltage | –0.3 | 3.6 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO21","unit":"V","category":"absolute_max","parameter":"IO input voltage (from VIH max)","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V"}],"input_capacitance":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| CIN | Pin capacitance | — | 2 | — | pF |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0,"via":"chip u1 GPIO21","orig":{"typ":2,"unit":"pF"},"unit":"F","symbol":"CIN","category":"characteristic","parameter":"Pin capacitance","conditions":"VDD=3.3V; 25 °C"}],"five_volt_tolerant":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO21","value":false,"category":"absolute_max","parameter":"5 V tolerant","conditions":"inputs limited to VDD + 0.3 V"}]},"entity_type":"pin"}],"taxonomy":{"schematic":{"role":"identity_overview","definition":"A full circuit schematic figure of the board (caption mentions schematic)"},"cover_legal":{"role":"other","definition":"Cover page, colophon, licence, legal disclaimer or trademark notice"},"gpio_adc_usage":{"role":"electrical_ratings","definition":"Application notes about GPIO voltage levels and ADC usage/limitations"},"pinout_diagram":{"role":"pins_or_terminals","definition":"A pinout or pin-numbering figure (its caption mentions pinout or pin numbering) mapping physical header pins to signal names and alternate functions"},"design_files_cad":{"role":"identity_overview","definition":"Links to design resources: schematic, PCB layout, STEP 3D model, Fritzing files"},"pin_descriptions":{"role":"pins_or_terminals","definition":"Text describing what individual pins do (power pins, RUN, ADC_VREF, internal GPIO, test points)"},"revision_history":{"role":"other","definition":"Documentation release / revision history"},"power_consumption":{"role":"performance","definition":"Measured supply current / power consumption tables or graphs in different operating modes"},"table_of_contents":{"role":"other","definition":"Table of contents listing sections and page numbers"},"mechanical_drawing":{"role":"mechanical_dimensions","definition":"Dimensioned mechanical drawing or text giving board size, thickness, hole positions and diameters"},"component_locations":{"role":"mechanical_dimensions","definition":"Component placement / locations drawing of the board"},"power_supply_design":{"role":"electrical_ratings","definition":"Power chain, regulator, powering the board from USB, batteries or external supplies"},"operating_conditions":{"role":"electrical_ratings","definition":"Recommended operating conditions: temperature range and allowed supply voltages"},"ordering_availability":{"role":"ordering_commercial","definition":"Ordering codes, part numbers, EAN, prices, minimum order quantity, availability guarantee"},"programming_debug_usb":{"role":"software_usage","definition":"Programming the flash, USB device/host usage, SWD debugging"},"smt_footprint_stencil":{"role":"mechanical_dimensions","definition":"Surface-mount footprint, pad layout or paste stencil drawings for mounting the board as a module"},"board_overview_features":{"role":"identity_overview","definition":"Overview of the board: what it is, key features list, main chip capabilities (cores, clock, memory, peripherals)"}},"variants":{},"commercial":{"other":{},"checked_at":"2026-10-12T10:32:49+00:00","compliance":[],"ordering_codes":[{"code":"DEV-33","description":"ProtoSupplies SKU (Tenstar Robot version)"}]},"mechanical":{"dims":{"width":{"src":{"page":9,"quote":"| Board Dimensions (L x W) | 22.5 x 18mm (0.89 x 0.71″) |","method":"table","table_id":"9_1"},"unit":"mm","value":18},"length":{"src":{"page":9,"quote":"| Board Dimensions (L x W) | 22.5 x 18mm (0.89 x 0.71″) |","method":"table","table_id":"9_1"},"unit":"mm","value":22.5},"pad_span":{"src":{"page":9,"quote":"| Pin Spacing (row-to-row) | 15.24mm (0.6″) |","method":"table","table_id":"9_1"},"unit":"mm","value":15.24},"pad_pitch":{"src":{"page":6,"quote":"- Pin Spacing: 0.6″ row to row with 0.1″ pin spacing. Breadboard compatible","method":"derived"},"note":"0.1″","unit":"mm","value":2.54}},"kind":"mechanical","holes":[],"units":"mm","origin":"board bottom-left; x along the 22.5 mm side (USB-C end)","features":[],"archetype":"pcb_board","assumptions":{"thickness":{"why":"PCB thickness not printed; 1.6 mm assumed for the CAD envelope only (Components101 gives 4.5 mm overall height with parts)","value":1.6}}},"page_index":[{"page":1,"tags":[],"primary":"none_of_these"},{"page":2,"tags":["pinout_diagram"],"primary":"pinout_diagram"},{"page":3,"tags":[],"primary":"board_overview_features"},{"page":4,"tags":["board_overview_features"],"primary":"board_overview_features"},{"page":5,"tags":[],"primary":"none_of_these"},{"page":6,"tags":["board_overview_features","gpio_adc_usage","power_supply_design"],"primary":"board_overview_features"},{"page":7,"tags":["programming_debug_usb"],"primary":"programming_debug_usb"},{"page":8,"tags":[],"primary":"none_of_these"},{"page":9,"tags":["board_overview_features"],"primary":"board_overview_features"},{"page":10,"tags":[],"primary":"none_of_these"},{"page":11,"tags":[],"primary":"none_of_these"},{"page":12,"tags":["board_overview_features","pinout_diagram","pin_descriptions"],"primary":"pinout_diagram"},{"page":13,"tags":["board_overview_features","pinout_diagram","revision_history"],"primary":"board_overview_features"},{"page":14,"tags":["board_overview_features","power_supply_design"],"primary":"board_overview_features"},{"page":15,"tags":["board_overview_features"],"primary":"board_overview_features"},{"page":16,"tags":["pin_descriptions"],"primary":"pin_descriptions"},{"page":17,"tags":["table_of_contents"],"primary":"table_of_contents"},{"page":18,"tags":["design_files_cad"],"primary":"design_files_cad"},{"page":19,"tags":[],"primary":"none_of_these"},{"page":20,"tags":["board_overview_features","pinout_diagram","pin_descriptions"],"primary":"pinout_diagram"},{"page":21,"tags":["board_overview_features","pinout_diagram","power_supply_design"],"primary":"board_overview_features"},{"page":22,"tags":[],"primary":"none_of_these"}],"performance":[],"schema_name":"datasheet-1","part_ratings":{}},"use_cases":["wireless-iot","compact-embedded","learning-prototyping","usb-devices"],"commercial":{"other":{},"checked_at":"2026-10-12T10:32:49+00:00","compliance":[],"ordering_codes":[{"code":"DEV-33","description":"ProtoSupplies SKU (Tenstar Robot version)"}]},"null_reasons":{"holes":{"note":"no mounting holes — header pins only","reason":"not_applicable"},"weight":{"note":"no mass in the sources","reason":"not_in_source"},"psram_kb":{"note":"no PSRAM","reason":"not_applicable"},"eeprom_kb":{"note":"no EEPROM","reason":"not_applicable"},"lifecycle":{"note":"generic board; no lifecycle statement","reason":"not_in_source"},"thickness":{"note":"PCB thickness not printed; CAD uses an explicit 1.6 mm assumption","reason":"not_in_source"},"compliance":{"note":"no certification statement for the generic board","reason":"not_in_source"},"case_temp_max_c":{"note":"chip rating","reason":"not_applicable"},"case_temp_min_c":{"note":"chip rating","reason":"not_applicable"},"component_heights":{"note":"only an overall 4.5 mm height (Components101); no per-part heights","reason":"not_in_source"},"junction_temp_max_c":{"note":"chip rating","reason":"not_applicable"},"operating_temperature":{"note":"no board operating range in the sources (chip rating lives on the esp32c3 record)","reason":"not_in_source"},"thermal_resistance_c_per_w":{"note":"package rating","reason":"not_applicable"}},"assembly_label":"Development board","assembly_level":3,"search_aliases":["ESP32-C3 SuperMini","ESP32-C3 Super Mini","ESP32C3 SuperMini","ESP32-C3 Mini","HW-466","ESP32-C3 SuperMini dev board","DEV-33"],"children_summary":[{"id":"d19e90b2-3f36-5271-9c63-8d6eb106e2b0--mcu","part_number":"ESP32-C3FN4","manufacturer":"Espressif Systems","role":"main_processor","architecture":"32-bit RISC-V single-core","clock_mhz":160,"memory":{"other":{"rom_kb":384},"sram_kb":400}}],"design":{"assets":[{"other":{},"kind":"datasheet","url":"https://protosupplies.com/product/esp32c3-supermini/","label":"Datasheet","verification":"manufacturer","notes":null,"resolved_url":"https://protosupplies.com/product/esp32c3-supermini/"},{"other":{},"kind":"image","url":"https://protosupplies.com/wp-content/uploads/2025/01/ESP32-C3.jpg","label":"ESP32-C3 SuperMini with loose 1×8 headers (ProtoSupplies)","verification":"unverified","notes":"inspected: black PCB, USB-C, BOOT and RST buttons, ESP32-C3 QFN, 40 MHz crystal, ceramic antenna at the far end, 2×8 gold pads labelled 21…0 / 5V G 3.3; retailer photo","resolved_url":"https://protosupplies.com/wp-content/uploads/2025/01/ESP32-C3.jpg"},{"other":{},"kind":"cad","url":"esp32-c3-supermini.step","label":"STEP (generated from datasheet drawing)","verification":"generated","notes":"cad_check passed","resolved_url":"https://wlrumvsjnliyuuvzwnrt.supabase.co/storage/v1/object/public/geometry/esp32-c3-supermini.step"}],"cad":{"verification":"generated","envelope_complete":false,"assumptions":["thickness=1.6 mm assumed: PCB thickness not printed; 1.6 mm assumed for the CAD envelope only (Components101 gives 4.5 mm overall height with parts)"],"step_path":"esp32-c3-supermini.step","mesh_path":"esp32-c3-supermini.stl","footprint_svg_path":null,"bbox":{"length_mm":22.5,"width_mm":18,"height_mm":1.6},"features":[],"step_url":"https://wlrumvsjnliyuuvzwnrt.supabase.co/storage/v1/object/public/geometry/esp32-c3-supermini.step","mesh_url":"https://wlrumvsjnliyuuvzwnrt.supabase.co/storage/v1/object/public/geometry/esp32-c3-supermini.stl","footprint_svg_url":null},"limitations":["Generated geometry is an approximate mechanical envelope; inspect original manufacturer CAD when available.","Generated footprint_svg_path is an outline, not a verified electrical land pattern.","Xirkit does not run fit checks; download step_url and test fit against your own enclosure."]}}}