# goBILDA Dual Mode Servo 25-4 Super Speed

> goBILDA 2000-0025-0004 dual-mode servo (25-4 Super Speed): 4.7 kg·cm stall and 230 rpm no-load at 6 V (4.8–7.4 V), 67:1 steel gears, 300° of travel in servo mode or continuous rotation once reprogrammed, 25-tooth spline, dual ball bearings, 5 kΩ pot feedback, 58 g.

- Manufacturer: goBILDA
- Part number: 2000-0025-0004
- Category: Actuators
- Canonical page: https://www.xirkit.io/products/gobilda-dual-mode-servo-25-4-super-speed-68d7
- Pinout: https://www.xirkit.io/products/gobilda-dual-mode-servo-25-4-super-speed-68d7/pinout
- Structured JSON: https://www.xirkit.io/products/gobilda-dual-mode-servo-25-4-super-speed-68d7/data.json
- Source: Xirkit structured parts catalog — every value traced to a cited document; unknowns are explicit.

## Key specifications

| Property | Value |
| --- | --- |
| Actuator type | pwm_servo |
| Gearbox | steel gear train 67:1 |
| Peak torque | 0.461 N·m |
| No-load speed | 230 rpm |
| Rated voltage | 7.4 V |
| Encoder | 5 kΩ potentiometer |
| Control interface | PWM |
| Control modes | position (300°), continuous rotation (reprogrammed) |
| Dimensions | 54.3 × 20 × 43.9 mm |

## Pinout (3 pins, 0 with electrical limits)

| Pin | Position | Kind | Chip pad | Functions | VIH | VIL | VOH | VOL | IOH | IOL | 5 V tolerant |
| --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- |
| SIGNAL | 3-pos TJC8 servo connector | signal | — | signal | — | — | — | — | — | — | — |
| V+ | 3-pos TJC8 servo connector | power in | — | power_in | — | — | — | — | — | — | — |
| GND | 3-pos TJC8 servo connector | ground | — | ground | — | — | — | — | — | — | — |

## Where to buy

| Supplier | Price | Stock | Checked | URL |
| --- | --- | --- | --- | --- |
| www.gobilda.com | 36.99 USD | in_stock | 2026-10-01 | https://www.gobilda.com/2000-series-dual-mode-servo-25-4-super-speed/ |

## FAQ

**What voltage powers the goBILDA Dual Mode Servo 25-4 Super Speed?**

Supply range 4.8–7.4 V.

**How much does the goBILDA Dual Mode Servo 25-4 Super Speed cost?**

From $36.99 at www.gobilda.com. Prices are observed unit prices before tax and shipping.

**What are the goBILDA Dual Mode Servo 25-4 Super Speed dimensions?**

54.3 × 20 × 43.9 mm. A STEP model is available for enclosure fit checks.

**Where does this goBILDA Dual Mode Servo 25-4 Super Speed data come from?**

Every value in this record is traced to a source — 2 documents including the board and chip datasheets — with the page and table cited per value. Unknowns are left explicit, never guessed.

## Sources

- [goBILDA Dual Mode Servo 25-4 Super Speed datasheet](https://www.gobilda.com/2000-series-dual-mode-servo-25-4-super-speed/)
- [www.gobilda.com listing](https://www.gobilda.com/2000-series-dual-mode-servo-25-4-super-speed/)

## Part graph

### Alternatives (by use case)

- [goBILDA 5-Turn Servo 25-2 Torque](https://www.xirkit.io/products/gobilda-5-turn-servo-25-2-torque-1a16) — Both serve robot joints and actuation — check the trade-offs; $36.99 vs $49.99
- [Waveshare ST3215 Servo 30 kg·cm 12 V](https://www.xirkit.io/products/waveshare-st3215-servo-30-kg-cm-12-v-250d) — Both serve robot joints and actuation — check the trade-offs; $36.99 vs $21.99
- [Waveshare ST3020 Servo 25 kg·cm 12 V](https://www.xirkit.io/products/waveshare-st3020-servo-25-kg-cm-12-v-3bb1) — Both serve robot joints and actuation — check the trade-offs; $36.99 vs $19.99
- [M5Stack Roller485 BLDC Unit (U182)](https://www.xirkit.io/products/m5stack-roller485-bldc-unit-u182-5e1c) — Both serve robot joints and actuation — check the trade-offs; $36.99 vs $36.95
- [ROBOTIS DYNAMIXEL AX-12A](https://www.xirkit.io/products/robotis-dynamixel-ax-12a-a648) — Both serve robot joints and actuation — check the trade-offs; $36.99 vs $57.39
- [goBILDA 5-Turn Servo 25-3 Speed](https://www.xirkit.io/products/gobilda-5-turn-servo-25-3-speed-cc0d) — Both serve robot joints and actuation — check the trade-offs; $36.99 vs $49.99
- [M5Stack RollerCAN BLDC Unit (U188)](https://www.xirkit.io/products/m5stack-rollercan-bldc-unit-u188-ced5) — Both serve robot joints and actuation — check the trade-offs; $36.99 vs $43.9
- [ROBOTIS DYNAMIXEL XL330-M288-T](https://www.xirkit.io/products/robotis-dynamixel-xl330-m288-t-db1e) — Both serve robot joints and actuation — check the trade-offs; $36.99 vs $27.49