{"publisher":"Xirkit — the structured parts marketplace","canonical":"https://www.xirkit.io/products/lk-tech-mg4010e-i10-v3-servo-motor-0995","markdown":"https://www.xirkit.io/products/lk-tech-mg4010e-i10-v3-servo-motor-0995/data.md","mcp":"https://www.xirkit.io/mcp","note":"Every value is traced to a cited source (see sources and per-value src). Null means unknown, never zero.","record":{"id":"09954df2-41dd-5ee5-bdfb-c8fcb5d5348d","mpn":"MG4010E-i10-V3","name":"LK-TECH MG4010E-i10 V3 Servo Motor","manufacturer":"LK-TECH (LKMTECH)","family":"actuator","summary":"LK-TECH MG4010E-i10 V3 is a BLDC servo with a PG4210 10:1 planetary reducer and built-in driver, available as a CAN or RS485 version. At 24 V it gives 2.5 N·m rated and 4.5 N·m max, 260 rpm rated and 320 rpm max, 140 W. It has an 18-bit motor encoder plus a 14-bit output encoder, ≤ 8 arcmin backlash, torque / speed / position loops, a 7.4–32 V supply, Ø53 × 41 mm and 250 g.","schema_version":"3.0","revision":null,"tags":["actuator","smart servo","robotic actuator","joint actuator","planetary gearbox","can or rs485 (two versions) bus","bldc","lk-tech (lkmtech)","robotics","robot arm"],"sources":[{"other":{},"id":"datasheet","url":"https://cdn.shopify.com/s/files/1/0673/6848/5000/files/INSTALLATION_DRAWING_MOTOR_CHARACTERISTIC_CURV.pdf","title":"LK-TECH MG4010E-i10 V3 Servo Motor datasheet","publisher":"LK-TECH (LKMTECH)","kind":"datasheet","retrieved_at":"2026-10-18T07:34:38+00:00","field_paths":["spec.constraints.electrical.supply_voltage_nominal_v","spec.geometry.body_diameter_mm","spec.geometry.body_length_mm","spec.geometry.cad.bbox.height_mm","spec.geometry.cad.bbox.length_mm","spec.geometry.cad.bbox.width_mm","spec.geometry.cad.envelope_complete","spec.geometry.cad.mesh_path","spec.geometry.cad.step_path","spec.geometry.cad.verification","spec.geometry.dimensions.height_mm","spec.geometry.dimensions.length_mm","spec.geometry.dimensions.width_mm","spec.geometry.other.weight_g","spec.provides.actuator_type","spec.provides.backlash_deg","spec.provides.control_interface","spec.provides.control_modes","spec.provides.encoder","spec.provides.encoder_bits","spec.provides.features","spec.provides.gear_ratio","spec.provides.gear_type","spec.provides.integrated_driver","spec.provides.kt_nm_per_a","spec.provides.kv_rpm_per_v","spec.provides.motor_type","spec.provides.no_load_speed_rpm","spec.provides.peak_torque_nm","spec.provides.rated_speed_rpm","spec.provides.rated_torque_nm","spec.provides.rotor_inertia_gcm2","spec.usage.connectors","spec.usage.pinout","spec.usage.pinout_complete","spec.usage.requirements.rated_current_a","spec.usage.requirements.rated_voltage_v"],"notes":"sha256 9ec90ea80cea67106b208456968110c2310d6471c4821fea6657cb3f71505016"},{"other":{},"id":"offer0","url":"https://aifitlab.com/products/lkmtech-mg4010e-i10-v3-motor?variant=43815844249736","title":"aifitlab.com listing","publisher":null,"kind":"distributor","retrieved_at":"2026-10-18T07:35:56+00:00","field_paths":["offers"],"notes":null}],"assets":[{"other":{},"kind":"datasheet","url":"https://cdn.shopify.com/s/files/1/0673/6848/5000/files/INSTALLATION_DRAWING_MOTOR_CHARACTERISTIC_CURV.pdf","label":"Datasheet","verification":"manufacturer","notes":null},{"other":{},"kind":"image","url":"https://cdn.shopify.com/s/files/1/0673/6848/5000/files/MG4010E-i10-1.jpg","label":"LK-TECH MG4010E-i10 V3 — product photo","verification":"unverified","notes":"inspected: K-TECH (LK-TECH) render, black cylinder with MG4010E-i10 V3 label, DIP switch and 6 rear screws; matches the drawing rear view. Distributor-hosted maker render."},{"other":{},"kind":"cad","url":"lkmtech-mg4010e-i10.step","label":"STEP (generated from datasheet drawing)","verification":"generated","notes":"cad_check passed"}],"offers":[{"other":{"price_breaks":[]},"supplier":"aifitlab.com","url":"https://aifitlab.com/products/lkmtech-mg4010e-i10-v3-motor?variant=43815844249736","currency":"USD","unit_price":165,"stock_status":"preorder","region":"US","minimum_quantity":null,"checked_at":"2026-10-18T07:35:56+00:00","lead_time_days_min":null,"lead_time_days_max":null,"destination":"US","destination_postal_code":null,"notes":null,"price_basis":"listed","unit_price_max":null}],"best_for":[{"other":{},"label":"Robot joints and actuation","reason":"smart servo: 2.5 N·m rated / 4.5 N·m peak at 10:1, 320 rpm no-load.","basis":"engineering_inference"}],"children":[],"spec":{"other":{},"usage":{"other":{},"pinout":[{"id":"BUS","kind":"can","label":"power + bus connector (CAN or RS485 version)","notes":"7.4–32 V input and CAN (1 Mbps) or RS485 (up to 2 Mbps)","other":{},"functions":["power + bus connector _can or rs485 version"],"electrical":{}}],"derived":{},"connectors":[{"id":"bus","kind":"power + CAN (1 Mbps) or RS485 (115200–2 Mbps) connector on the rear face; DIP switch beside it","other":{}}],"pin_mappings":[],"requirements":{"other":{},"data_inputs":[],"power_inputs":[],"rated_current_a":3.5,"rated_voltage_v":24},"pinout_complete":true},"geometry":{"cad":{"bbox":{"width_mm":53,"height_mm":41,"length_mm":53},"features":[],"mesh_path":"lkmtech-mg4010e-i10.stl","step_path":"lkmtech-mg4010e-i10.step","assumptions":[],"verification":"generated","envelope_complete":true},"other":{"weight_g":250},"derived":{},"dimensions":{"other":{},"width_mm":53,"height_mm":41,"length_mm":53},"feature_boxes":[],"body_length_mm":41,"mounting_holes":[],"body_diameter_mm":53},"provides":{"other":{},"derived":{},"encoder":"18-bit motor + 14-bit output magnetic encoders","features":["Dual magnetic encoders: 18-bit on the motor, 14-bit on the reducer output (absolute output position)","Loops: torque 24 kHz, speed 8 kHz, position 4 kHz; trapezoidal acceleration profile","Bus update rate: RS485 500 Hz at 115200 bps, CAN 2 kHz at 1 Mbps; CAN 100 k–1 Mbit, RS485 9600 bps–2 Mbps","Reducer PG4210, backlash ≤ 8 arcmin, bearing rated load 1000 N; built-in motor temperature sensing","Motor: 28 poles, 14 turns, Y winding, 0.604 Ω / 0.28 mH phase, rotor inertia 202 g·cm², 108.3 rpm/V","Mounting: rear 6 × M3 8 mm deep on Ø48; output 6 × M2.5 8 mm deep on Ø47.5, 3 × M3 5 mm deep on Ø27, 3 × Ø3 pin holes, Ø8 centre bore","Recommended drive DG40E (driver integrated in the E version)","Availability (2026-10-18): AIFIT Lab $165 (CAN or RS485 version), backordered"],"gear_type":"planetary","gear_ratio":10,"motor_type":"bldc","kt_nm_per_a":0.07,"backlash_deg":0.133333,"capabilities":[],"encoder_bits":18,"kv_rpm_per_v":108.3,"actuator_type":"smart_servo","control_modes":["torque","speed","position"],"peak_torque_nm":4.5,"rated_speed_rpm":260,"rated_torque_nm":2.5,"control_interface":"CAN or RS485 (two versions)","integrated_driver":true,"no_load_speed_rpm":320,"rotor_inertia_gcm2":202},"compliance":{"other":{},"derived":{},"certifications":[]},"constraints":{"other":{},"derived":{},"thermal":{"other":{}},"electrical":{"other":{},"supply_voltage_nominal_v":24}}},"other":null,"source_type":"pdf","source_ref":"https://cdn.shopify.com/s/files/1/0673/6848/5000/files/INSTALLATION_DRAWING_MOTOR_CHARACTERISTIC_CURV.pdf","datasheet":{"cad":{"bbox":{"max":[26.5,26.5,41],"min":[-26.5,-26.5,0],"width_mm":53,"height_mm":41,"length_mm":53},"check":{"failed":[],"passed":true},"expected":[{"d":53,"x":0,"y":0,"axis":"z","name":"envelope","what":"cylinder"},{"what":"envelope_z","value":41}],"archetype":"envelope_cylinder","mesh_path":"/Users/sumeet/Documents/Xirkit Parent/XirkitOnboard/work/lkmtech-mg4010e-i10/07_cad/part.stl","step_path":"/Users/sumeet/Documents/Xirkit Parent/XirkitOnboard/work/lkmtech-mg4010e-i10/07_cad/part.step","views_png":"/Users/sumeet/Documents/Xirkit Parent/XirkitOnboard/work/lkmtech-mg4010e-i10/07_cad/views.png","export_stl":"lkmtech-mg4010e-i10.stl","assumptions":[],"export_step":"lkmtech-mg4010e-i10.step","source_step":null,"verification":"generated","envelope_complete":true},"chips":[],"fields":{"kt":{"src":{"page":7,"quote":"| Torque Constant | 0.07N.m/A |","method":"table","table_id":"7_1"},"unit":"N·m/A","value":0.07},"kv":{"src":{"page":7,"quote":"| Speed constant | 108.3rpm/V |","method":"table","table_id":"7_1"},"unit":"rpm/V","value":108.3},"weight":{"src":{"page":7,"quote":"| Motor Weight | 250g |","method":"table","table_id":"7_1"},"unit":"g","value":250},"encoder":{"src":{"page":7,"quote":"| Encoder | 18bit(motor)+14bit(reducer)Magnetic Encoder |","method":"table","table_id":"7_1"},"unit":null,"value":"18-bit motor + 14-bit output magnetic encoders"},"backlash":{"src":{"page":7,"quote":"| Backlash | ≤8 arcmin |","method":"table","table_id":"7_1"},"orig":{"unit":"arcmin","value":8},"unit":"deg","value":0.1333333333},"connector":{"src":{"page":7,"quote":"| Communication | RS485 OR CAN |","method":"table","table_id":"7_1"},"unit":null,"value":"power + CAN or RS485 connector (rear face)"},"gear_type":{"src":{"page":7,"quote":"| Reducer Type | PG4210 |","method":"derived","table_id":"7_1"},"unit":null,"value":"planetary"},"gear_ratio":{"src":{"page":7,"quote":"| Reduction Ratio | 1:10 |","method":"table","table_id":"7_1"},"unit":null,"value":10},"motor_type":{"src":{"page":7,"quote":"| Winding Type | Y |","method":"derived","table_id":"7_1"},"unit":null,"value":"bldc"},"peak_torque":{"src":{"page":7,"quote":"| Max Torque | 4.5N.m |","method":"table","table_id":"7_1"},"unit":"N·m","value":4.5},"rated_speed":{"src":{"page":7,"quote":"| Rated Speed | 260RPM |","method":"table","table_id":"7_1"},"unit":"rpm","value":260},"rated_torque":{"src":{"page":7,"quote":"| Rated Torque | 2.5N.m |","method":"table","table_id":"7_1"},"unit":"N·m","value":2.5},"actuator_type":{"src":{"page":7,"quote":"| Reducer Type | PG4210 |","method":"derived","table_id":"7_1"},"unit":null,"value":"smart_servo"},"control_modes":{"src":{"page":7,"quote":"| Control Mode | Torque Loop(24KHz)/Speed Loop(8KHz)/Position Loop(4KHz) |","method":"table","table_id":"7_1"},"unit":null,"value":["torque","speed","position"]},"no_load_speed":{"src":{"page":7,"quote":"| Max Speed | 320RPM |","method":"table","table_id":"7_1"},"unit":"rpm","value":320},"rated_current":{"src":{"page":7,"quote":"| Rated Current | 3.5A |","method":"table","table_id":"7_1"},"unit":"A","value":3.5},"rated_voltage":{"src":{"page":7,"quote":"| Rated Voltage | 24V |","method":"table","table_id":"7_1"},"unit":"V","value":24},"rotor_inertia":{"src":{"page":7,"quote":"| Rotor inertia | 202gcm² |","method":"table","table_id":"7_1"},"orig":{"unit":"g·cm²","value":202},"unit":"kg·m²","value":0.0000202},"control_interface":{"src":{"page":7,"quote":"| Communication | RS485 OR CAN |","method":"table","table_id":"7_1"},"unit":null,"value":"CAN or RS485 (two versions)"},"integrated_driver":{"src":{"page":7,"quote":"| Drive input Voltage | 7.4-32V |","method":"derived","table_id":"7_1"},"unit":null,"value":true}},"groups":{"all":["BUS"]},"source":{"url":"https://cdn.shopify.com/s/files/1/0673/6848/5000/files/INSTALLATION_DRAWING_MOTOR_CHARACTERISTIC_CURV.pdf","pages":7,"sha256":"9ec90ea80cea67106b208456968110c2310d6471c4821fea6657cb3f71505016","onboarded_at":"2026-10-18T07:36:10+00:00"},"coverage":{"pct":97.1,"score":"33/34","passed":true,"explained_nulls":["peak_current","backdrive_torque","torque_density","operating_temperature","lifecycle","compliance"]},"entities":[{"id":"BUS","attrs":{"kind":"can","label":"power + bus connector (CAN or RS485 version)","designator":"BUS","description":"7.4–32 V input and CAN (1 Mbps) or RS485 (up to 2 Mbps)"},"sources":[{"page":7,"quote":"| Communication | RS485 OR CAN |","method":"table","fragment":"entities_leads.json","table_id":"7_1"}],"attr_src":{"kind":{"page":7,"quote":"| Communication | RS485 OR CAN |","method":"table","fragment":"entities_leads.json","table_id":"7_1"},"label":{"page":7,"quote":"| Communication | RS485 OR CAN |","method":"table","fragment":"entities_leads.json","table_id":"7_1"},"designator":{"page":7,"quote":"| Communication | RS485 OR CAN |","method":"table","fragment":"entities_leads.json","table_id":"7_1"},"description":{"page":7,"quote":"| Communication | RS485 OR CAN |","method":"table","fragment":"entities_leads.json","table_id":"7_1"}},"functions":[],"electrical":{},"entity_type":"lead"}],"taxonomy":{"dimensions":{"role":"mechanical_dimensions","definition":"Size (diameter × length), packing size, dimension drawing or mounting pattern"},"site_chrome":{"role":"other","definition":"Website navigation, FAQs, reviews, related products, support links, footers"},"model_comparison":{"role":"electrical_ratings","definition":"Comparison table of several models of the series (one row per model: voltage, power, torque, current, speed, ratio, weight, size, encoder)"},"pricing_ordering":{"role":"ordering_commercial","definition":"Price, options (KV, driver board yes/no), SKU, shipping, payment, points"},"product_overview":{"role":"identity_overview","definition":"Product description / highlights: what the actuator integrates (motor, gearbox, driver, encoder), control modes, protections, applications"},"connectors_wiring":{"role":"pins_or_terminals","definition":"Power / CAN / UART connectors, cables in the wiring pack, pin assignments"},"specification_table":{"role":"electrical_ratings","definition":"Specification grid: voltage, rated/peak torque, speeds, currents, Kt/Kv, gear ratio, backlash, back-drive, encoder, inertia, weight, connectors, temperature"}},"variants":{},"commercial":{"other":{},"checked_at":"2026-10-18T07:35:56+00:00","compliance":[],"ordering_codes":[{"code":"MG4010E-i10-V3 (CAN)","description":"CAN version (RS485 version same price)"}]},"mechanical":{"dims":{"length":{"src":{"page":1,"quote":"41 ±0.1","figure":"INSTALLATION DRAWING","method":"drawing"},"note":"plus a 1 mm Ø37 output spigot","unit":"mm","value":41},"diameter":{"src":{"page":1,"quote":"Φ53 0/-0.05","figure":"INSTALLATION DRAWING","method":"drawing"},"unit":"mm","value":53},"mount_pattern":{"src":{"page":1,"quote":"6-M3▽8 Φ48 · 6-M2.5▽8 Φ47.5 · 3-M3▽5 Φ27","figure":"INSTALLATION DRAWING","method":"drawing"},"value":"rear 6 × M3 ▽8 on Ø48; output 6 × M2.5 ▽8 on Ø47.5 and 3 × M3 ▽5 on Ø27"}},"kind":"mechanical","holes":[],"units":"mm","origin":"axis = Z at x=y=0; envelope from z=0 to z=length","features":[],"archetype":"envelope_cylinder","assumptions":{}},"page_index":[{"page":1,"tags":[],"primary":"none_of_these"},{"page":2,"tags":[],"primary":"site_chrome"},{"page":3,"tags":["pricing_ordering"],"primary":"pricing_ordering"},{"page":4,"tags":["pricing_ordering"],"primary":"pricing_ordering"},{"page":5,"tags":[],"primary":"product_overview"},{"page":6,"tags":[],"primary":"none_of_these"},{"page":7,"tags":["specification_table"],"primary":"specification_table"}],"performance":[],"schema_name":"datasheet-1","part_ratings":{}},"use_cases":["joint-actuation"],"commercial":{"other":{},"checked_at":"2026-10-18T07:35:56+00:00","compliance":[],"ordering_codes":[{"code":"MG4010E-i10-V3 (CAN)","description":"CAN version (RS485 version same price)"}]},"null_reasons":{"lifecycle":{"note":"store availability is not lifecycle evidence","reason":"not_in_source"},"compliance":{"note":"not stated","reason":"not_in_source"},"peak_current":{"note":"not printed","reason":"not_in_source"},"torque_density":{"note":"not printed","reason":"not_in_source"},"backdrive_torque":{"note":"not printed","reason":"not_in_source"},"operating_temperature":{"note":"not printed","reason":"not_in_source"}},"assembly_label":"Actuator","assembly_level":2,"search_aliases":["MG4010E-i10-V3","2.5 Nm 10:1 smart servo"],"design":{"assets":[{"other":{},"kind":"datasheet","url":"https://cdn.shopify.com/s/files/1/0673/6848/5000/files/INSTALLATION_DRAWING_MOTOR_CHARACTERISTIC_CURV.pdf","label":"Datasheet","verification":"manufacturer","notes":null,"resolved_url":"https://cdn.shopify.com/s/files/1/0673/6848/5000/files/INSTALLATION_DRAWING_MOTOR_CHARACTERISTIC_CURV.pdf"},{"other":{},"kind":"image","url":"https://cdn.shopify.com/s/files/1/0673/6848/5000/files/MG4010E-i10-1.jpg","label":"LK-TECH MG4010E-i10 V3 — product photo","verification":"unverified","notes":"inspected: K-TECH (LK-TECH) render, black cylinder with MG4010E-i10 V3 label, DIP switch and 6 rear screws; matches the drawing rear view. Distributor-hosted maker render.","resolved_url":"https://cdn.shopify.com/s/files/1/0673/6848/5000/files/MG4010E-i10-1.jpg"},{"other":{},"kind":"cad","url":"lkmtech-mg4010e-i10.step","label":"STEP (generated from datasheet drawing)","verification":"generated","notes":"cad_check passed","resolved_url":"https://wlrumvsjnliyuuvzwnrt.supabase.co/storage/v1/object/public/geometry/lkmtech-mg4010e-i10.step"}],"cad":{"verification":"generated","envelope_complete":true,"assumptions":[],"step_path":"lkmtech-mg4010e-i10.step","mesh_path":"lkmtech-mg4010e-i10.stl","footprint_svg_path":null,"bbox":{"length_mm":53,"width_mm":53,"height_mm":41},"features":[],"step_url":"https://wlrumvsjnliyuuvzwnrt.supabase.co/storage/v1/object/public/geometry/lkmtech-mg4010e-i10.step","mesh_url":"https://wlrumvsjnliyuuvzwnrt.supabase.co/storage/v1/object/public/geometry/lkmtech-mg4010e-i10.stl","footprint_svg_url":null},"limitations":["Generated geometry is an approximate mechanical envelope; inspect original manufacturer CAD when available.","Generated footprint_svg_path is an outline, not a verified electrical land pattern.","Xirkit does not run fit checks; download step_url and test fit against your own enclosure."]}}}