{"publisher":"Xirkit — the structured parts marketplace","canonical":"https://www.xirkit.io/products/pjrc-teensy-4-1-988c","markdown":"https://www.xirkit.io/products/pjrc-teensy-4-1-988c/data.md","mcp":"https://www.xirkit.io/mcp","note":"Every value is traced to a cited source (see sources and per-value src). Null means unknown, never zero.","record":{"id":"988c93b9-e010-52f5-a705-19fb5583bd0a","mpn":"TEENSY41","name":"Teensy 4.1","manufacturer":"PJRC","family":"dev_board","summary":"PJRC Teensy 4.1: NXP i.MX RT1062 Cortex-M7 at 600 MHz, 7936K flash, 1024K RAM, 55 I/O (35 PWM, 18 analog), 8 serial / 3 SPI / 3 I2C, 3 CAN (1 FD), 2 I2S + S/PDIF, 10/100 Ethernet PHY, micro-SD (SDIO), USB device + host at 480 Mbit/s, QSPI pads for PSRAM/flash; 3.3 V I/O (not 5 V tolerant); 61×18 mm breadboard form. Strong fit for robotics: 4 hardware quadrature decoders, 3 CAN buses, many PWM groups.","schema_version":"3.0","revision":null,"tags":["dev_board","can bus","robotics","ethernet","native usb","beginner friendly","mimxrt1062dvj6b","pjrc","microcontroller","development board","i2c","spi","uart","usb","i2s","sdio","arduino"],"sources":[{"other":{},"id":"datasheet","url":"https://www.pjrc.com/store/teensy41.html","title":"Teensy 4.1 datasheet","publisher":"PJRC","kind":"datasheet","retrieved_at":"2026-09-24T22:07:21+00:00","field_paths":["spec.compliance.certifications","spec.constraints.electrical.io_voltage_v","spec.constraints.electrical.logic_high_min_v","spec.constraints.electrical.max_current_ma","spec.constraints.electrical.pin_drive_max_ma","spec.constraints.electrical.supply_voltage_max_v","spec.constraints.electrical.supply_voltage_min_v","spec.geometry.cad.assumptions","spec.geometry.cad.bbox.height_mm","spec.geometry.cad.bbox.length_mm","spec.geometry.cad.bbox.width_mm","spec.geometry.cad.envelope_complete","spec.geometry.cad.mesh_path","spec.geometry.cad.step_path","spec.geometry.cad.verification","spec.geometry.dimensions.height_mm","spec.geometry.dimensions.length_mm","spec.geometry.dimensions.width_mm","spec.geometry.feature_boxes","spec.provides.capabilities","spec.provides.features","spec.provides.gpio_count","spec.provides.memory.eeprom_kb","spec.provides.memory.flash_kb","spec.provides.memory.sram_kb","spec.provides.software_frameworks","spec.usage.connectors","spec.usage.pin_mappings","spec.usage.pinout","spec.usage.pinout_complete","spec.usage.requirements.power_inputs"],"notes":"sha256 00bbe5ce5ab5e36b1d9678f5914530f39def67ab9ccaae02a61934790b9e7363"},{"other":{},"id":"offer0","url":"https://www.sparkfun.com/teensy-4-1.html","title":"www.sparkfun.com listing","publisher":null,"kind":"distributor","retrieved_at":"2026-09-24T22:13:02+00:00","field_paths":["offers"],"notes":null},{"other":{},"id":"offer1","url":"https://www.adafruit.com/product/4622","title":"www.adafruit.com listing","publisher":null,"kind":"distributor","retrieved_at":"2026-09-24T22:13:06+00:00","field_paths":["offers"],"notes":null}],"assets":[{"other":{},"kind":"datasheet","url":"https://www.pjrc.com/store/teensy41.html","label":"Datasheet","verification":"manufacturer","notes":null},{"other":{},"kind":"image","url":"https://www.pjrc.com/store/teensy41_4.jpg","label":"Teensy 4.1 top view","verification":"manufacturer","notes":"inspected: top of board: MIMXRT1062 DVJ6B BGA, GD32 bootloader chip, micro-USB at left, micro-SD socket at right, 2×24 edge pin rows; saved at work/teensy-4-1/images/"},{"other":{},"kind":"cad","url":"teensy-4-1.step","label":"STEP (generated from datasheet drawing)","verification":"generated","notes":"cad_check passed"}],"offers":[{"other":{"sku":"DEV-16771","price_breaks":[]},"supplier":"www.sparkfun.com","url":"https://www.sparkfun.com/teensy-4-1.html","currency":"USD","unit_price":31.5,"stock_status":"unknown","region":"US","minimum_quantity":null,"checked_at":"2026-09-24T22:13:02+00:00","lead_time_days_min":null,"lead_time_days_max":null,"destination":"US","destination_postal_code":null,"notes":null},{"other":{"sku":"4622","price_breaks":[]},"supplier":"www.adafruit.com","url":"https://www.adafruit.com/product/4622","currency":"USD","unit_price":29.95,"stock_status":"out_of_stock","region":"US","minimum_quantity":null,"checked_at":"2026-09-24T22:13:06+00:00","lead_time_days_min":null,"lead_time_days_max":null,"destination":"US","destination_postal_code":null,"notes":null}],"best_for":[{"other":{},"label":"Robotics and CAN-bus motor control","reason":"3 CAN interfaces plus hardware quadrature decoders — talk to motor drivers and ODrive/VESC-style controllers directly.","basis":"engineering_inference"},{"other":{},"label":"Wired networking and industrial control","reason":"Ethernet interface for deterministic, wired links.","basis":"engineering_inference"},{"other":{},"label":"Custom USB devices (HID, MIDI, serial)","reason":"USB is on the main chip (MIMXRT1062DVJ6B), so the board can enumerate as a keyboard, MIDI device or CDC serial port.","basis":"engineering_inference"},{"other":{},"label":"Learning and fast prototyping","reason":"Programs from Arduino.","basis":"engineering_inference"}],"children":[{"other":{},"ref_id":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","role":"main_processor","count":1,"notes":"NXP MIMXRT1062DVJ6B"},{"other":{},"ref_id":"988c93b9-e010-52f5-a705-19fb5583bd0a--flash","role":"flash_memory","count":1,"notes":"Winbond W25Q64JV-DTR (8 MB)"},{"other":{},"ref_id":"988c93b9-e010-52f5-a705-19fb5583bd0a--phy","role":"ethernet_phy","count":1,"notes":"Texas Instruments DP83825I"},{"other":{},"ref_id":"988c93b9-e010-52f5-a705-19fb5583bd0a--u2","role":"bootloader_chip","count":1,"notes":"GigaDevice GD32E230F8 (after June 2022)"},{"other":{},"ref_id":"988c93b9-e010-52f5-a705-19fb5583bd0a--u4","role":"ldo_regulator","count":1,"notes":"Texas Instruments TLV75533P (after March 2023; earlier TLV75733P / NCV8186AMN330TAG)"}],"spec":{"other":{},"usage":{"other":{},"pinout":[{"id":"VIN","kind":"power_in","label":"VIN","other":{},"position":"T1","reserved":false,"connector":"header_top","functions":["power_in"],"electrical":{"input_voltage":{"max":5.5,"min":3.6,"unit":"V","source":"p.21"}}},{"id":"GND_T1","kind":"ground","label":"GND","other":{},"position":"T2","reserved":false,"connector":"header_top","functions":["ground"],"voltage_v":0,"electrical":{}},{"id":"3V3_T","kind":"power_out","label":"3.3V","other":{},"position":"T3","reserved":false,"connector":"header_top","functions":["power_out"],"voltage_v":3.3,"electrical":{"output_current":{"max":250,"unit":"mA","source":"p.14"},"output_voltage":{"typ":3.3,"unit":"V","source":"p.14"}}},{"id":"P23","kind":"analog","label":"23","other":{},"position":"T4","reserved":false,"connector":"header_top","functions":["D23","interrupt","A9 (12-bit ADC, 0–3.3 V)","PWM (FlexPWM4 Module1)","CRX1","MCLK1","CAN1","GPIO1.IO[25]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_AD_B1_09"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_AD_B1_09"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_AD_B1_09"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_AD_B1_09"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_AD_B1_09"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_09"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_AD_B1_09"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_09"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_AD_B1_09"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_09"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"adc_input_range":{"max":3.3,"min":0,"unit":"V","source":"p.8","conditions":"fixed; analogReference() has no effect"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P22","kind":"analog","label":"22","other":{},"position":"T5","reserved":false,"connector":"header_top","functions":["D22","interrupt","A8 (12-bit ADC, 0–3.3 V)","PWM (FlexPWM4 Module0)","CTX1","CAN1","GPIO1.IO[24]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_AD_B1_08"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_AD_B1_08"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_AD_B1_08"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_AD_B1_08"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_AD_B1_08"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_08"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_AD_B1_08"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_08"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_AD_B1_08"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_08"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"adc_input_range":{"max":3.3,"min":0,"unit":"V","source":"p.8","conditions":"fixed; analogReference() has no effect"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P21","kind":"analog","label":"21","other":{},"position":"T6","reserved":false,"connector":"header_top","functions":["D21","interrupt","A7 (12-bit ADC, 0–3.3 V)","RX5","BCLK1","GPIO1.IO[27]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_AD_B1_11"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_AD_B1_11"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_AD_B1_11"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_AD_B1_11"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_AD_B1_11"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_11"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_AD_B1_11"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_11"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_AD_B1_11"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_11"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"adc_input_range":{"max":3.3,"min":0,"unit":"V","source":"p.8","conditions":"fixed; analogReference() has no effect"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P20","kind":"analog","label":"20","other":{},"position":"T7","reserved":false,"connector":"header_top","functions":["D20","interrupt","A6 (12-bit ADC, 0–3.3 V)","TX5","LRCLK1","GPIO1.IO[26]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_AD_B1_10"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_AD_B1_10"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_AD_B1_10"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_AD_B1_10"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_AD_B1_10"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_10"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_AD_B1_10"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_10"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_AD_B1_10"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_10"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"adc_input_range":{"max":3.3,"min":0,"unit":"V","source":"p.8","conditions":"fixed; analogReference() has no effect"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P19","kind":"analog","label":"19","other":{},"position":"T8","reserved":false,"connector":"header_top","functions":["D19","interrupt","A5 (12-bit ADC, 0–3.3 V)","PWM (QuadTimer3 Module0)","SCL","GPIO1.IO[16]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_AD_B1_00"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_AD_B1_00"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_AD_B1_00"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_AD_B1_00"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_AD_B1_00"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_00"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_AD_B1_00"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_00"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_AD_B1_00"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_00"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"adc_input_range":{"max":3.3,"min":0,"unit":"V","source":"p.8","conditions":"fixed; analogReference() has no effect"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P18","kind":"analog","label":"18","other":{},"position":"T9","reserved":false,"connector":"header_top","functions":["D18","interrupt","A4 (12-bit ADC, 0–3.3 V)","PWM (QuadTimer3 Module1)","SDA","GPIO1.IO[17]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_AD_B1_01"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_AD_B1_01"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_AD_B1_01"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_AD_B1_01"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_AD_B1_01"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_01"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_AD_B1_01"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_01"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_AD_B1_01"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_01"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"adc_input_range":{"max":3.3,"min":0,"unit":"V","source":"p.8","conditions":"fixed; analogReference() has no effect"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P17","kind":"analog","label":"17","other":{},"position":"T10","reserved":false,"connector":"header_top","functions":["D17","interrupt","A3 (12-bit ADC, 0–3.3 V)","TX4","SDA1","GPIO1.IO[22]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_AD_B1_06"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_AD_B1_06"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_AD_B1_06"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_AD_B1_06"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_AD_B1_06"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_06"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_AD_B1_06"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_06"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_AD_B1_06"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_06"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"adc_input_range":{"max":3.3,"min":0,"unit":"V","source":"p.8","conditions":"fixed; analogReference() has no effect"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P16","kind":"analog","label":"16","other":{},"position":"T11","reserved":false,"connector":"header_top","functions":["D16","interrupt","A2 (12-bit ADC, 0–3.3 V)","RX4","SCL1","GPIO1.IO[23]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_AD_B1_07"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_AD_B1_07"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_AD_B1_07"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_AD_B1_07"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_AD_B1_07"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_07"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_AD_B1_07"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_07"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_AD_B1_07"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_07"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"adc_input_range":{"max":3.3,"min":0,"unit":"V","source":"p.8","conditions":"fixed; analogReference() has no effect"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P15","kind":"analog","label":"15","other":{},"position":"T12","reserved":false,"connector":"header_top","functions":["D15","interrupt","A1 (12-bit ADC, 0–3.3 V)","PWM (QuadTimer3 Module3)","RX3","S/PDIF IN","GPIO1.IO[19]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_AD_B1_03"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_AD_B1_03"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_AD_B1_03"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_AD_B1_03"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_AD_B1_03"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_03"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_AD_B1_03"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_03"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_AD_B1_03"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_03"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"adc_input_range":{"max":3.3,"min":0,"unit":"V","source":"p.8","conditions":"fixed; analogReference() has no effect"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P14","kind":"analog","label":"14","other":{},"position":"T13","reserved":false,"connector":"header_top","functions":["D14","interrupt","A0 (12-bit ADC, 0–3.3 V)","PWM (QuadTimer3 Module2)","TX3","S/PDIF OUT","GPIO1.IO[18]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_AD_B1_02"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_AD_B1_02"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_AD_B1_02"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_AD_B1_02"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_AD_B1_02"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_02"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_AD_B1_02"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_02"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_AD_B1_02"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_02"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"adc_input_range":{"max":3.3,"min":0,"unit":"V","source":"p.8","conditions":"fixed; analogReference() has no effect"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P13","kind":"gpio","label":"13","other":{},"position":"T14","reserved":false,"connector":"header_top","functions":["D13","interrupt","PWM (QuadTimer2 Module0)","SCK","LED_BUILTIN (orange)","GPIO2.IO[3]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_B0_03"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_B0_03"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_B0_03"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_B0_03"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_B0_03"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B0_03"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_B0_03"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B0_03"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_B0_03"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B0_03"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"GND_T2","kind":"ground","label":"GND","other":{},"position":"T15","reserved":false,"connector":"header_top","functions":["ground"],"voltage_v":0,"electrical":{}},{"id":"P41","kind":"analog","label":"41","other":{},"position":"T16","reserved":false,"connector":"header_top","functions":["D41","interrupt","A17 (12-bit ADC, 0–3.3 V)","GPIO1.IO[21]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_AD_B1_05"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_AD_B1_05"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_AD_B1_05"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_AD_B1_05"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_AD_B1_05"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_05"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_AD_B1_05"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_05"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_AD_B1_05"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_05"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"adc_input_range":{"max":3.3,"min":0,"unit":"V","source":"p.8","conditions":"fixed; analogReference() has no effect"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P40","kind":"analog","label":"40","other":{},"position":"T17","reserved":false,"connector":"header_top","functions":["D40","interrupt","A16 (12-bit ADC, 0–3.3 V)","GPIO1.IO[20]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_AD_B1_04"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_AD_B1_04"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_AD_B1_04"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_AD_B1_04"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_AD_B1_04"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_04"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_AD_B1_04"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_04"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_AD_B1_04"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_04"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"adc_input_range":{"max":3.3,"min":0,"unit":"V","source":"p.8","conditions":"fixed; analogReference() has no effect"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P39","kind":"analog","label":"39","other":{},"position":"T18","reserved":false,"connector":"header_top","functions":["D39","interrupt","A15 (12-bit ADC, 0–3.3 V)","MISO1","OUT1A","GPIO1.IO[29]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_AD_B1_13"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_AD_B1_13"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_AD_B1_13"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_AD_B1_13"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_AD_B1_13"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_13"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_AD_B1_13"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_13"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_AD_B1_13"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_13"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"adc_input_range":{"max":3.3,"min":0,"unit":"V","source":"p.8","conditions":"fixed; analogReference() has no effect"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P38","kind":"analog","label":"38","other":{},"position":"T19","reserved":false,"connector":"header_top","functions":["D38","interrupt","A14 (12-bit ADC, 0–3.3 V)","CS1","IN1","GPIO1.IO[28]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_AD_B1_12"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_AD_B1_12"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_AD_B1_12"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_AD_B1_12"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_AD_B1_12"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_12"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_AD_B1_12"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_12"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_AD_B1_12"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_12"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"adc_input_range":{"max":3.3,"min":0,"unit":"V","source":"p.8","conditions":"fixed; analogReference() has no effect"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P37","kind":"gpio","label":"37","other":{},"position":"T20","reserved":false,"connector":"header_top","functions":["D37","interrupt","PWM (FlexPWM2 Module3)","CS","GPIO2.IO[19]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_B1_03"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_B1_03"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_B1_03"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_B1_03"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_B1_03"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B1_03"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_B1_03"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B1_03"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_B1_03"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B1_03"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P36","kind":"gpio","label":"36","other":{},"position":"T21","reserved":false,"connector":"header_top","functions":["D36","interrupt","PWM (FlexPWM2 Module3)","CS","GPIO2.IO[18]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_B1_02"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_B1_02"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_B1_02"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_B1_02"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_B1_02"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B1_02"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_B1_02"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B1_02"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_B1_02"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B1_02"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P35","kind":"gpio","label":"35","other":{},"position":"T22","reserved":false,"connector":"header_top","functions":["D35","interrupt","TX8","GPIO2.IO[28]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_B1_12"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_B1_12"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_B1_12"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_B1_12"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_B1_12"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B1_12"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_B1_12"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B1_12"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_B1_12"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B1_12"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P34","kind":"gpio","label":"34","other":{},"position":"T23","reserved":false,"connector":"header_top","functions":["D34","interrupt","RX8","GPIO2.IO[29]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_B1_13"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_B1_13"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_B1_13"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_B1_13"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_B1_13"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B1_13"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_B1_13"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B1_13"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_B1_13"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B1_13"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P33","kind":"gpio","label":"33","other":{},"position":"T24","reserved":false,"connector":"header_top","functions":["D33","interrupt","PWM (FlexPWM2 Module0)","MCLK2","GPIO4.IO[7]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_EMC_07"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_EMC_07"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_EMC_07"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_EMC_07"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_EMC_07"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_07"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_EMC_07"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_07"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_EMC_07"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_07"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"GND_B1","kind":"ground","label":"GND","other":{},"position":"B1","reserved":false,"connector":"header_bottom","functions":["ground"],"voltage_v":0,"electrical":{}},{"id":"P0","kind":"gpio","label":"0","other":{},"position":"B2","reserved":false,"connector":"header_bottom","functions":["D0","interrupt","PWM (FlexPWM1 Module1)","RX1","CS1","CRX2","CAN2","GPIO1.IO[3]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_AD_B0_03"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_AD_B0_03"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_AD_B0_03"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_AD_B0_03"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_AD_B0_03"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B0_03"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_AD_B0_03"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B0_03"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_AD_B0_03"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B0_03"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P1","kind":"gpio","label":"1","other":{},"position":"B3","reserved":false,"connector":"header_bottom","functions":["D1","interrupt","PWM (FlexPWM1 Module0)","TX1","MISO1","CTX2","CAN2","GPIO1.IO[2]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_AD_B0_02"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_AD_B0_02"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_AD_B0_02"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_AD_B0_02"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_AD_B0_02"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B0_02"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_AD_B0_02"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B0_02"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_AD_B0_02"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B0_02"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P2","kind":"gpio","label":"2","other":{},"position":"B4","reserved":false,"connector":"header_bottom","functions":["D2","interrupt","PWM (FlexPWM4 Module2)","OUT2","GPIO4.IO[4]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_EMC_04"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_EMC_04"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_EMC_04"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_EMC_04"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_EMC_04"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_04"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_EMC_04"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_04"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_EMC_04"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_04"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P3","kind":"gpio","label":"3","other":{},"position":"B5","reserved":false,"connector":"header_bottom","functions":["D3","interrupt","PWM (FlexPWM4 Module2)","LRCLK2","GPIO4.IO[5]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_EMC_05"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_EMC_05"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_EMC_05"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_EMC_05"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_EMC_05"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_05"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_EMC_05"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_05"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_EMC_05"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_05"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P4","kind":"gpio","label":"4","other":{},"position":"B6","reserved":false,"connector":"header_bottom","functions":["D4","interrupt","PWM (FlexPWM2 Module0)","BCLK2","GPIO4.IO[6]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_EMC_06"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_EMC_06"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_EMC_06"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_EMC_06"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_EMC_06"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_06"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_EMC_06"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_06"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_EMC_06"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_06"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P5","kind":"gpio","label":"5","other":{},"position":"B7","reserved":false,"connector":"header_bottom","functions":["D5","interrupt","PWM (FlexPWM2 Module1)","IN2","GPIO4.IO[8]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_EMC_08"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_EMC_08"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_EMC_08"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_EMC_08"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_EMC_08"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_08"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_EMC_08"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_08"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_EMC_08"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_08"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P6","kind":"gpio","label":"6","other":{},"position":"B8","reserved":false,"connector":"header_bottom","functions":["D6","interrupt","PWM (FlexPWM2 Module2)","OUT1D","GPIO2.IO[10]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_B0_10"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_B0_10"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_B0_10"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_B0_10"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_B0_10"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B0_10"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_B0_10"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B0_10"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_B0_10"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B0_10"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P7","kind":"gpio","label":"7","other":{},"position":"B9","reserved":false,"connector":"header_bottom","functions":["D7","interrupt","PWM (FlexPWM1 Module3)","RX2","OUT1A","GPIO2.IO[17]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_B1_01"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_B1_01"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_B1_01"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_B1_01"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_B1_01"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B1_01"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_B1_01"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B1_01"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_B1_01"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B1_01"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P8","kind":"gpio","label":"8","other":{},"position":"B10","reserved":false,"connector":"header_bottom","functions":["D8","interrupt","PWM (FlexPWM1 Module3)","TX2","IN1","GPIO2.IO[16]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_B1_00"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_B1_00"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_B1_00"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_B1_00"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_B1_00"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B1_00"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_B1_00"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B1_00"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_B1_00"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B1_00"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P9","kind":"gpio","label":"9","other":{},"position":"B11","reserved":false,"connector":"header_bottom","functions":["D9","interrupt","PWM (FlexPWM2 Module2)","OUT1C","GPIO2.IO[11]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_B0_11"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_B0_11"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_B0_11"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_B0_11"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_B0_11"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B0_11"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_B0_11"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B0_11"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_B0_11"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B0_11"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P10","kind":"gpio","label":"10","other":{},"position":"B12","reserved":false,"connector":"header_bottom","functions":["D10","interrupt","PWM (QuadTimer1 Module0)","CS","MQSR","GPIO2.IO[0]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_B0_00"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_B0_00"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_B0_00"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_B0_00"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_B0_00"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B0_00"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_B0_00"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B0_00"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_B0_00"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B0_00"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P11","kind":"gpio","label":"11","other":{},"position":"B13","reserved":false,"connector":"header_bottom","functions":["D11","interrupt","PWM (QuadTimer1 Module2)","MOSI","CTX1","GPIO2.IO[2]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_B0_02"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_B0_02"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_B0_02"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_B0_02"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_B0_02"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B0_02"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_B0_02"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B0_02"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_B0_02"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B0_02"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P12","kind":"gpio","label":"12","other":{},"position":"B14","reserved":false,"connector":"header_bottom","functions":["D12","interrupt","PWM (QuadTimer1 Module1)","MISO","MQSL","GPIO2.IO[1]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_B0_01"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_B0_01"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_B0_01"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_B0_01"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_B0_01"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B0_01"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_B0_01"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B0_01"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_B0_01"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B0_01"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"3V3_B","kind":"power_out","label":"3.3V","other":{},"position":"B15","reserved":false,"connector":"header_bottom","functions":["power_out"],"voltage_v":3.3,"electrical":{"output_current":{"max":250,"unit":"mA","source":"p.14"},"output_voltage":{"typ":3.3,"unit":"V","source":"p.14"}}},{"id":"P24","kind":"analog","label":"24","other":{},"position":"B16","reserved":false,"connector":"header_bottom","functions":["D24","interrupt","A10 (12-bit ADC, 0–3.3 V)","PWM (FlexPWM1 Module2)","TX6","SCL2","GPIO1.IO[12]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_AD_B0_12"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_AD_B0_12"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_AD_B0_12"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_AD_B0_12"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_AD_B0_12"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B0_12"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_AD_B0_12"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B0_12"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_AD_B0_12"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B0_12"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"adc_input_range":{"max":3.3,"min":0,"unit":"V","source":"p.8","conditions":"fixed; analogReference() has no effect"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P25","kind":"analog","label":"25","other":{},"position":"B17","reserved":false,"connector":"header_bottom","functions":["D25","interrupt","A11 (12-bit ADC, 0–3.3 V)","PWM (FlexPWM1 Module3)","RX6","SDA2","GPIO1.IO[13]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_AD_B0_13"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_AD_B0_13"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_AD_B0_13"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_AD_B0_13"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_AD_B0_13"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B0_13"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_AD_B0_13"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B0_13"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_AD_B0_13"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B0_13"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"adc_input_range":{"max":3.3,"min":0,"unit":"V","source":"p.8","conditions":"fixed; analogReference() has no effect"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P26","kind":"analog","label":"26","other":{},"position":"B18","reserved":false,"connector":"header_bottom","functions":["D26","interrupt","A12 (12-bit ADC, 0–3.3 V)","MOSI1","GPIO1.IO[30]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_AD_B1_14"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_AD_B1_14"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_AD_B1_14"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_AD_B1_14"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_AD_B1_14"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_14"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_AD_B1_14"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_14"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_AD_B1_14"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_14"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"adc_input_range":{"max":3.3,"min":0,"unit":"V","source":"p.8","conditions":"fixed; analogReference() has no effect"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P27","kind":"analog","label":"27","other":{},"position":"B19","reserved":false,"connector":"header_bottom","functions":["D27","interrupt","A13 (12-bit ADC, 0–3.3 V)","SCK1","GPIO1.IO[31]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_AD_B1_15"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_AD_B1_15"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_AD_B1_15"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_AD_B1_15"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_AD_B1_15"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_15"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_AD_B1_15"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_15"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_AD_B1_15"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_AD_B1_15"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"adc_input_range":{"max":3.3,"min":0,"unit":"V","source":"p.8","conditions":"fixed; analogReference() has no effect"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P28","kind":"gpio","label":"28","other":{},"position":"B20","reserved":false,"connector":"header_bottom","functions":["D28","interrupt","PWM (FlexPWM3 Module1)","RX7","GPIO3.IO[18]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_EMC_32"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_EMC_32"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_EMC_32"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_EMC_32"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_EMC_32"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_32"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_EMC_32"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_32"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_EMC_32"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_32"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P29","kind":"gpio","label":"29","other":{},"position":"B21","reserved":false,"connector":"header_bottom","functions":["D29","interrupt","PWM (FlexPWM3 Module1)","TX7","GPIO4.IO[31]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_EMC_31"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_EMC_31"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_EMC_31"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_EMC_31"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_EMC_31"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_31"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_EMC_31"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_31"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_EMC_31"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_31"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P30","kind":"gpio","label":"30","other":{},"position":"B22","reserved":false,"connector":"header_bottom","functions":["D30","interrupt","CRX3","CAN3 (CAN FD)","GPIO3.IO[23]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_EMC_37"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_EMC_37"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_EMC_37"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_EMC_37"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_EMC_37"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_37"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_EMC_37"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_37"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_EMC_37"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_37"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P31","kind":"gpio","label":"31","other":{},"position":"B23","reserved":false,"connector":"header_bottom","functions":["D31","interrupt","CTX3","CAN3 (CAN FD)","GPIO3.IO[22]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_EMC_36"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_EMC_36"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_EMC_36"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_EMC_36"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_EMC_36"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_36"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_EMC_36"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_36"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_EMC_36"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_36"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P32","kind":"gpio","label":"32","other":{},"position":"B24","reserved":false,"connector":"header_bottom","functions":["D32","interrupt","OUT1B","GPIO2.IO[12]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_B0_12"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_B0_12"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_B0_12"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_B0_12"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_B0_12"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B0_12"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_B0_12"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B0_12"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_B0_12"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_B0_12"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P42","kind":"gpio","label":"42","other":{},"position":"SD1","reserved":false,"connector":"microsd_socket","functions":["D42","interrupt","PWM (FlexPWM1 Module1)","DAT1","MISO2","GPIO3.IO[15]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_SD_B0_03"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_SD_B0_03"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_SD_B0_03"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_SD_B0_03"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_SD_B0_03"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_SD_B0_03"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_SD_B0_03"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_SD_B0_03"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_SD_B0_03"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_SD_B0_03"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P43","kind":"gpio","label":"43","other":{},"position":"SD2","reserved":false,"connector":"microsd_socket","functions":["D43","interrupt","PWM (FlexPWM1 Module1)","DAT0","MOSI2","GPIO3.IO[14]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_SD_B0_02"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_SD_B0_02"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_SD_B0_02"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_SD_B0_02"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_SD_B0_02"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_SD_B0_02"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_SD_B0_02"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_SD_B0_02"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_SD_B0_02"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_SD_B0_02"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P44","kind":"gpio","label":"44","other":{},"position":"SD3","reserved":false,"connector":"microsd_socket","functions":["D44","interrupt","PWM (FlexPWM1 Module0)","CLK","CS2","SDA1","GPIO3.IO[13]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_SD_B0_01"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_SD_B0_01"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_SD_B0_01"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_SD_B0_01"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_SD_B0_01"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_SD_B0_01"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_SD_B0_01"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_SD_B0_01"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_SD_B0_01"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_SD_B0_01"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P45","kind":"gpio","label":"45","other":{},"position":"SD4","reserved":false,"connector":"microsd_socket","functions":["D45","interrupt","PWM (FlexPWM1 Module0)","CMD","SCK2","SCL1","GPIO3.IO[12]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_SD_B0_00"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_SD_B0_00"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_SD_B0_00"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_SD_B0_00"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_SD_B0_00"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_SD_B0_00"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_SD_B0_00"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_SD_B0_00"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_SD_B0_00"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_SD_B0_00"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P46","kind":"gpio","label":"46","other":{},"position":"SD5","reserved":false,"connector":"microsd_socket","functions":["D46","interrupt","PWM (FlexPWM1 Module2)","DAT3","RX5","GPIO3.IO[17]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_SD_B0_05"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_SD_B0_05"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_SD_B0_05"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_SD_B0_05"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_SD_B0_05"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_SD_B0_05"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_SD_B0_05"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_SD_B0_05"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_SD_B0_05"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_SD_B0_05"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P47","kind":"gpio","label":"47","other":{},"position":"SD6","reserved":false,"connector":"microsd_socket","functions":["D47","interrupt","PWM (FlexPWM1 Module2)","DAT2","TX5","GPIO3.IO[16]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_SD_B0_04"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_SD_B0_04"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_SD_B0_04"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_SD_B0_04"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_SD_B0_04"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_SD_B0_04"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_SD_B0_04"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_SD_B0_04"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_SD_B0_04"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_SD_B0_04"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P48","kind":"gpio","label":"48","other":{},"position":"Q1","reserved":false,"connector":"bottom_smt_pads","functions":["D48","interrupt","CS0","RX8","GPIO4.IO[24]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_EMC_24"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_EMC_24"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_EMC_24"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_EMC_24"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_EMC_24"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_24"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_EMC_24"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_24"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_EMC_24"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_24"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P49","kind":"gpio","label":"49","other":{},"position":"Q2","reserved":false,"connector":"bottom_smt_pads","functions":["D49","interrupt","D1","SCK2","GPIO4.IO[27]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_EMC_27"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_EMC_27"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_EMC_27"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_EMC_27"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_EMC_27"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_27"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_EMC_27"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_27"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_EMC_27"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_27"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P50","kind":"gpio","label":"50","other":{},"position":"Q3","reserved":false,"connector":"bottom_smt_pads","functions":["D50","interrupt","D2","MOSI2","GPIO4.IO[28]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_EMC_28"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_EMC_28"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_EMC_28"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_EMC_28"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_EMC_28"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_28"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_EMC_28"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_28"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_EMC_28"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_28"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P51","kind":"gpio","label":"51","other":{},"position":"Q4","reserved":false,"connector":"bottom_smt_pads","functions":["D51","interrupt","PWM","CS1","SCL1","GPIO4.IO[22]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_EMC_22"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_EMC_22"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_EMC_22"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_EMC_22"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_EMC_22"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_22"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_EMC_22"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_22"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_EMC_22"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_22"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P52","kind":"gpio","label":"52","other":{},"position":"Q5","reserved":false,"connector":"bottom_smt_pads","functions":["D52","interrupt","D0","RX1","GPIO4.IO[26]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_EMC_26"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_EMC_26"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_EMC_26"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_EMC_26"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_EMC_26"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_26"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_EMC_26"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_26"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_EMC_26"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_26"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P53","kind":"gpio","label":"53","other":{},"position":"Q6","reserved":false,"connector":"bottom_smt_pads","functions":["D53","interrupt","CLK","TX1","GPIO4.IO[25]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_EMC_25"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_EMC_25"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_EMC_25"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_EMC_25"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_EMC_25"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_25"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_EMC_25"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_25"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_EMC_25"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_25"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"P54","kind":"gpio","label":"54","other":{},"position":"Q7","reserved":false,"connector":"bottom_smt_pads","functions":["D54","interrupt","PWM","D3","MISO2","GPIO4.IO[29]"],"voltage_v":3.3,"electrical":{"ioh":{"max":4,"unit":"mA","source":"p.7"},"iol":{"typ":4,"unit":"mA","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010; chip u1 GPIO_EMC_29"},"vih":{"max":3.3,"min":2.31,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC; chip u1 GPIO_EMC_29"},"vil":{"max":0.99,"min":0,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC; chip u1 GPIO_EMC_29"},"voh":{"min":3.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111); chip u1 GPIO_EMC_29"},"vol":{"max":0.15,"unit":"V","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"Iol=1 mA (DSE 011…111); chip u1 GPIO_EMC_29"},"keeper":{"max":175,"min":105,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_29"},"pull_up":{"typ":47,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown; chip u1 GPIO_EMC_29"},"pull_down":{"typ":100,"unit":"kΩ","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_29"},"hysteresis":{"min":250,"unit":"mV","source":"MIMXRT1062DVJ6B datasheet p.37 table 37_1","conditions":"NVCC_xxxx=3.3V; chip u1 GPIO_EMC_29"},"io_voltage":{"unit":"V","value":3.3,"source":"p.7"},"input_leakage":{"max":1,"min":-1,"unit":"µA","source":"MIMXRT1062DVJ6B datasheet p.38 table 38_1","conditions":"chip u1 GPIO_EMC_29"},"abs_max_voltage":{"max":3.3,"unit":"V","source":"p.7","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"},"output_impedance":{"max":150,"min":21,"unit":"Ω","source":"p.7","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"},"five_volt_tolerant":{"value":false,"source":"p.7"}},"max_drive_ma":4,"boot_strapping":false,"five_volt_tolerant":false},{"id":"ONOFF","kind":"control","label":"On/Off","other":{},"position":"ONOFF","reserved":false,"connector":"inner_power_row","functions":["On/Off pushbutton (hold 4 s = off, 0.5 s = on)","ONOFF"],"electrical":{},"boot_strapping":false},{"id":"PROGRAM","kind":"control","label":"Program","other":{},"position":"PROGRAM","reserved":false,"connector":"inner_power_row","functions":["Program (bootloader) button input"],"electrical":{}},{"id":"GND_I","kind":"ground","label":"GND","other":{},"position":"GND_I","reserved":false,"connector":"inner_power_row","functions":["ground"],"voltage_v":0,"electrical":{}},{"id":"3V3_I","kind":"power_out","label":"3.3V","other":{},"position":"3V3_I","reserved":false,"connector":"inner_power_row","functions":["power_out"],"voltage_v":3.3,"electrical":{"output_current":{"max":250,"unit":"mA","source":"p.14"},"output_voltage":{"typ":3.3,"unit":"V","source":"p.14"}}},{"id":"VBAT","kind":"power_in","label":"VBAT","other":{},"position":"VBAT","reserved":false,"connector":"inner_power_row","functions":["power_in"],"voltage_v":3,"electrical":{"input_voltage":{"typ":3,"unit":"V","source":"p.14"}}},{"id":"UH_5V","kind":"power_out","label":"USB Host +5V","other":{},"position":"UH_5V","reserved":false,"connector":"usb_host_header","functions":["power_out"],"electrical":{}},{"id":"UH_DM","kind":"usb","label":"USB Host D−","other":{},"position":"UH_DM","reserved":false,"connector":"usb_host_header","functions":["USB host D−"],"electrical":{}},{"id":"UH_DP","kind":"usb","label":"USB Host D+","other":{},"position":"UH_DP","reserved":false,"connector":"usb_host_header","functions":["USB host D+"],"electrical":{}},{"id":"UH_GND1","kind":"ground","label":"GND","other":{},"position":"UH_GND1","reserved":false,"connector":"usb_host_header","functions":["ground"],"voltage_v":0,"electrical":{}},{"id":"UH_GND2","kind":"ground","label":"GND","other":{},"position":"UH_GND2","reserved":false,"connector":"usb_host_header","functions":["ground"],"voltage_v":0,"electrical":{}},{"id":"ETH_RXP","kind":"other","label":"Ethernet RX+","other":{},"position":"ETH_RXP","reserved":false,"connector":"ethernet_header","functions":["Ethernet RX+"],"electrical":{}},{"id":"ETH_RXN","kind":"other","label":"Ethernet RX−","other":{},"position":"ETH_RXN","reserved":false,"connector":"ethernet_header","functions":["Ethernet RX−"],"electrical":{}},{"id":"ETH_LED","kind":"control","label":"Ethernet LED","other":{},"position":"ETH_LED","reserved":false,"connector":"ethernet_header","functions":["Ethernet link LED"],"electrical":{}},{"id":"ETH_GND","kind":"ground","label":"GND","other":{},"position":"ETH_GND","reserved":false,"connector":"ethernet_header","functions":["ground"],"voltage_v":0,"electrical":{}},{"id":"ETH_TXN","kind":"other","label":"Ethernet TX−","other":{},"position":"ETH_TXN","reserved":false,"connector":"ethernet_header","functions":["Ethernet TX−"],"electrical":{}},{"id":"ETH_TXP","kind":"other","label":"Ethernet TX+","other":{},"position":"ETH_TXP","reserved":false,"connector":"ethernet_header","functions":["Ethernet TX+"],"electrical":{}},{"id":"VUSB","kind":"power_in","label":"VUSB","other":{},"position":"VUSB","reserved":false,"connector":"bottom_pads","functions":["power_in"],"voltage_v":5,"electrical":{"input_voltage":{"typ":5,"unit":"V","source":"p.14"}}},{"id":"Q_3V3_1","kind":"power_out","label":"3.3V","other":{},"position":"Q_3V3_1","reserved":false,"connector":"bottom_smt_pads","functions":["power_out"],"voltage_v":3.3,"electrical":{"output_current":{"max":250,"unit":"mA","source":"p.14"},"output_voltage":{"typ":3.3,"unit":"V","source":"p.14"}}},{"id":"Q_GND","kind":"ground","label":"GND","other":{},"position":"Q_GND","reserved":false,"connector":"bottom_smt_pads","functions":["ground"],"voltage_v":0,"electrical":{}}],"derived":{},"connectors":[{"id":"USB","kind":"USB Micro-B (device, 480 Mbit/s)","other":{}},{"id":"header_top","kind":"1×24 through-hole, 2.54 mm","other":{},"pitch_mm":2.54,"pin_count":24},{"id":"header_bottom","kind":"1×24 through-hole, 2.54 mm","other":{},"pitch_mm":2.54,"pin_count":24},{"id":"inner_power_row","kind":"1×5 through-hole (On/Off, Program, GND, 3.3V, VBAT)","other":{},"pitch_mm":2.54,"pin_count":5},{"id":"usb_host_header","kind":"1×5 through-hole USB host (+5V, D−, D+, GND, GND)","other":{},"pitch_mm":2.54,"pin_count":5},{"id":"ethernet_header","kind":"2×3 through-hole Ethernet (for PJRC Ethernet kit)","other":{},"pitch_mm":2,"pin_count":6},{"id":"microsd_socket","kind":"micro-SD socket (4-bit SDIO)","other":{}},{"id":"bottom_smt_pads","kind":"7 bottom SMT pads + QSPI memory footprints (2 × SOIC-8 for PSRAM/flash)","other":{},"pin_count":7}],"pin_mappings":[{"other":{},"signal":"GPIO_AD_B1_09","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P23","child_pin_id":"GPIO_AD_B1_09"},{"other":{},"signal":"GPIO_AD_B1_08","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P22","child_pin_id":"GPIO_AD_B1_08"},{"other":{},"signal":"GPIO_AD_B1_11","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P21","child_pin_id":"GPIO_AD_B1_11"},{"other":{},"signal":"GPIO_AD_B1_10","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P20","child_pin_id":"GPIO_AD_B1_10"},{"other":{},"signal":"GPIO_AD_B1_00","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P19","child_pin_id":"GPIO_AD_B1_00"},{"other":{},"signal":"GPIO_AD_B1_01","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P18","child_pin_id":"GPIO_AD_B1_01"},{"other":{},"signal":"GPIO_AD_B1_06","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P17","child_pin_id":"GPIO_AD_B1_06"},{"other":{},"signal":"GPIO_AD_B1_07","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P16","child_pin_id":"GPIO_AD_B1_07"},{"other":{},"signal":"GPIO_AD_B1_03","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P15","child_pin_id":"GPIO_AD_B1_03"},{"other":{},"signal":"GPIO_AD_B1_02","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P14","child_pin_id":"GPIO_AD_B1_02"},{"other":{},"signal":"GPIO_B0_03","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P13","child_pin_id":"GPIO_B0_03"},{"other":{},"signal":"GPIO_AD_B1_05","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P41","child_pin_id":"GPIO_AD_B1_05"},{"other":{},"signal":"GPIO_AD_B1_04","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P40","child_pin_id":"GPIO_AD_B1_04"},{"other":{},"signal":"GPIO_AD_B1_13","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P39","child_pin_id":"GPIO_AD_B1_13"},{"other":{},"signal":"GPIO_AD_B1_12","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P38","child_pin_id":"GPIO_AD_B1_12"},{"other":{},"signal":"GPIO_B1_03","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P37","child_pin_id":"GPIO_B1_03"},{"other":{},"signal":"GPIO_B1_02","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P36","child_pin_id":"GPIO_B1_02"},{"other":{},"signal":"GPIO_B1_12","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P35","child_pin_id":"GPIO_B1_12"},{"other":{},"signal":"GPIO_B1_13","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P34","child_pin_id":"GPIO_B1_13"},{"other":{},"signal":"GPIO_EMC_07","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P33","child_pin_id":"GPIO_EMC_07"},{"other":{},"signal":"GPIO_AD_B0_03","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P0","child_pin_id":"GPIO_AD_B0_03"},{"other":{},"signal":"GPIO_AD_B0_02","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P1","child_pin_id":"GPIO_AD_B0_02"},{"other":{},"signal":"GPIO_EMC_04","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P2","child_pin_id":"GPIO_EMC_04"},{"other":{},"signal":"GPIO_EMC_05","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P3","child_pin_id":"GPIO_EMC_05"},{"other":{},"signal":"GPIO_EMC_06","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P4","child_pin_id":"GPIO_EMC_06"},{"other":{},"signal":"GPIO_EMC_08","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P5","child_pin_id":"GPIO_EMC_08"},{"other":{},"signal":"GPIO_B0_10","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P6","child_pin_id":"GPIO_B0_10"},{"other":{},"signal":"GPIO_B1_01","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P7","child_pin_id":"GPIO_B1_01"},{"other":{},"signal":"GPIO_B1_00","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P8","child_pin_id":"GPIO_B1_00"},{"other":{},"signal":"GPIO_B0_11","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P9","child_pin_id":"GPIO_B0_11"},{"other":{},"signal":"GPIO_B0_00","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P10","child_pin_id":"GPIO_B0_00"},{"other":{},"signal":"GPIO_B0_02","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P11","child_pin_id":"GPIO_B0_02"},{"other":{},"signal":"GPIO_B0_01","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P12","child_pin_id":"GPIO_B0_01"},{"other":{},"signal":"GPIO_AD_B0_12","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P24","child_pin_id":"GPIO_AD_B0_12"},{"other":{},"signal":"GPIO_AD_B0_13","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P25","child_pin_id":"GPIO_AD_B0_13"},{"other":{},"signal":"GPIO_AD_B1_14","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P26","child_pin_id":"GPIO_AD_B1_14"},{"other":{},"signal":"GPIO_AD_B1_15","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P27","child_pin_id":"GPIO_AD_B1_15"},{"other":{},"signal":"GPIO_EMC_32","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P28","child_pin_id":"GPIO_EMC_32"},{"other":{},"signal":"GPIO_EMC_31","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P29","child_pin_id":"GPIO_EMC_31"},{"other":{},"signal":"GPIO_EMC_37","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P30","child_pin_id":"GPIO_EMC_37"},{"other":{},"signal":"GPIO_EMC_36","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P31","child_pin_id":"GPIO_EMC_36"},{"other":{},"signal":"GPIO_B0_12","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P32","child_pin_id":"GPIO_B0_12"},{"other":{},"signal":"GPIO_SD_B0_03","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P42","child_pin_id":"GPIO_SD_B0_03"},{"other":{},"signal":"GPIO_SD_B0_02","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P43","child_pin_id":"GPIO_SD_B0_02"},{"other":{},"signal":"GPIO_SD_B0_01","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P44","child_pin_id":"GPIO_SD_B0_01"},{"other":{},"signal":"GPIO_SD_B0_00","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P45","child_pin_id":"GPIO_SD_B0_00"},{"other":{},"signal":"GPIO_SD_B0_05","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P46","child_pin_id":"GPIO_SD_B0_05"},{"other":{},"signal":"GPIO_SD_B0_04","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P47","child_pin_id":"GPIO_SD_B0_04"},{"other":{},"signal":"GPIO_EMC_24","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P48","child_pin_id":"GPIO_EMC_24"},{"other":{},"signal":"GPIO_EMC_27","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P49","child_pin_id":"GPIO_EMC_27"},{"other":{},"signal":"GPIO_EMC_28","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P50","child_pin_id":"GPIO_EMC_28"},{"other":{},"signal":"GPIO_EMC_22","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P51","child_pin_id":"GPIO_EMC_22"},{"other":{},"signal":"GPIO_EMC_26","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P52","child_pin_id":"GPIO_EMC_26"},{"other":{},"signal":"GPIO_EMC_25","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P53","child_pin_id":"GPIO_EMC_25"},{"other":{},"signal":"GPIO_EMC_29","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"P54","child_pin_id":"GPIO_EMC_29"},{"other":{},"signal":"ONOFF","child_ref":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","route_type":"direct","board_pin_id":"ONOFF","child_pin_id":"ONOFF"}],"requirements":{"other":{},"data_inputs":[],"power_inputs":[{"name":"VIN","other":{},"voltage_max_v":5.5,"voltage_min_v":3.6},{"name":"VBAT","other":{}},{"name":"VUSB","other":{}}]},"pinout_complete":true},"geometry":{"cad":{"bbox":{"width_mm":17.78,"height_mm":4.07,"length_mm":61.56},"features":[],"mesh_path":"teensy-4-1.stl","step_path":"teensy-4-1.step","assumptions":["feature Program pushbutton: button y position read from the drawing (centred)","feature i.MX RT1062 BGA: 12×12 mm package per the RT1062 data sheet; placement from the photo; height not given"],"verification":"generated","envelope_complete":false},"other":{},"derived":{},"dimensions":{"other":{},"width_mm":17.78,"height_mm":1.57,"length_mm":60.96},"feature_boxes":[{"name":"USB Micro-B receptacle","x_mm":-0.6,"y_mm":5.140000000000001,"other":{},"width_mm":7.5,"height_mm":2.5,"length_mm":5},{"name":"Program pushbutton","x_mm":41.43,"y_mm":7.640000000000001,"other":{},"width_mm":2.5,"height_mm":1.8,"length_mm":3},{"name":"i.MX RT1062 BGA","x_mm":21,"y_mm":2.9,"other":{},"width_mm":12,"height_mm":1.2,"length_mm":12}],"mounting_holes":[]},"provides":{"other":{},"memory":{"other":{},"sram_kb":1024,"flash_kb":7936,"eeprom_kb":4},"derived":{},"features":["4 quadrature encoder timers (motor feedback)","3 CAN bus (1 with CAN FD)","22 independent PWM frequency groups","Ethernet 10/100 with DP83825 PHY","USB host 480 Mbit/s","QSPI expansion: 2 extra RAM/flash chips (e.g. 8 MB PSRAM)","RTC with VBAT coin cell","Hardware crypto + TRNG","32 DMA channels","Lockable variants for secure code","Internal temperature sensor","Nested interrupt priorities for low-latency control loops","Pin 53 is NOT PWM (older cards wrong)"],"wireless":[],"gpio_count":55,"capabilities":[{"other":{},"protocol":"gpio","available":true,"board_pin_ids":["P23","P22","P21","P20","P19","P18","P17","P16","P15","P14","P13","P41","P40","P39","P38","P37","P36","P35","P34","P33","P0","P1","P2","P3","P4","P5","P6","P7","P8","P9","P10","P11","P12","P24","P25","P26","P27","P28","P29","P30","P31","P32","P42","P43","P44","P45","P46","P47","P48","P49","P50","P51","P52","P53","P54"]},{"other":{},"protocol":"interrupt","available":true,"board_pin_ids":["P23","P22","P21","P20","P19","P18","P17","P16","P15","P14","P13","P41","P40","P39","P38","P37","P36","P35","P34","P33","P0","P1","P2","P3","P4","P5","P6","P7","P8","P9","P10","P11","P12","P24","P25","P26","P27","P28","P29","P30","P31","P32","P42","P43","P44","P45","P46","P47","P48","P49","P50","P51","P52","P53","P54"]},{"notes":"count stated in datasheet (adc_channels)","other":{},"protocol":"adc","available":true,"board_pin_ids":["P23","P22","P21","P20","P19","P18","P17","P16","P15","P14","P41","P40","P39","P38","P24","P25","P26","P27"],"instance_count":18},{"notes":"count stated in datasheet (pwm_channels)","other":{},"protocol":"pwm","available":true,"board_pin_ids":["P23","P22","P19","P18","P15","P14","P13","P37","P36","P33","P0","P1","P2","P3","P4","P5","P6","P7","P8","P9","P10","P11","P12","P24","P25","P28","P29","P42","P43","P44","P45","P46","P47","P51","P54"],"instance_count":35},{"notes":"count stated in datasheet (can_count)","other":{},"protocol":"can","available":true,"board_pin_ids":["P23","P22","P0","P1","P11","P30","P31"],"instance_count":3},{"notes":"count stated in datasheet (i2s_count)","other":{},"protocol":"i2s","available":true,"board_pin_ids":["P23","P21","P20","P39","P38","P33","P2","P3","P4","P5","P6","P7","P8","P9","P32"],"instance_count":2},{"notes":"count stated in datasheet (uart_count)","other":{},"protocol":"uart","available":true,"board_pin_ids":["P21","P20","P17","P16","P15","P14","P35","P34","P0","P1","P7","P8","P24","P25","P28","P29","P46","P47","P48","P52","P53"],"instance_count":8},{"notes":"count stated in datasheet (i2c_count)","other":{},"protocol":"i2c","available":true,"board_pin_ids":["P19","P18","P17","P16","P24","P25","P44","P45","P51"],"instance_count":3},{"other":{},"protocol":"audio","available":true,"board_pin_ids":["P15","P14","P10","P12"]},{"notes":"count stated in datasheet (spi_count)","other":{},"protocol":"spi","available":true,"board_pin_ids":["P13","P39","P38","P37","P36","P0","P1","P10","P11","P12","P26","P27","P42","P43","P44","P45","P48","P49","P50","P51","P54"],"instance_count":3},{"other":{},"protocol":"led","available":true,"board_pin_ids":["P13","ETH_LED"]},{"other":{},"protocol":"sdio","available":true,"board_pin_ids":["P42","P43","P44","P45","P46","P47","P53"]},{"other":{},"protocol":"qspi","available":true,"board_pin_ids":["P49","P50","P52","P54"]},{"other":{},"protocol":"control","available":true,"board_pin_ids":["ONOFF","PROGRAM"]},{"other":{},"protocol":"usb","available":true,"board_pin_ids":["UH_DM","UH_DP"]},{"other":{},"protocol":"ethernet","available":true,"board_pin_ids":["ETH_RXP","ETH_RXN","ETH_TXN","ETH_TXP"]}],"software_frameworks":["Arduino (Teensyduino)","Makefile / command line"]},"compliance":{"other":{},"derived":{},"certifications":["FCC / ISED","CE / UKCA","RoHS","REACH"]},"constraints":{"other":{},"derived":{},"thermal":{"other":{}},"electrical":{"other":{},"io_voltage_v":3.3,"max_current_ma":100,"logic_high_min_v":2.31,"pin_drive_max_ma":4,"supply_voltage_max_v":5.5,"supply_voltage_min_v":3}}},"other":null,"source_type":"pdf","source_ref":"https://www.pjrc.com/store/teensy41.html","datasheet":{"cad":{"bbox":{"max":[60.96,17.78,4.07],"min":[-0.6,0,0],"width_mm":17.78,"height_mm":4.07,"length_mm":61.56},"check":{"failed":[],"passed":true},"expected":[{"what":"pcb","width":17.78,"length":60.96,"thickness":1.57}],"archetype":"pcb_board","mesh_path":"/Users/sumeet/Documents/Xirkit Parent/XirkitOnboard/work/teensy-4-1/07_cad/part.stl","step_path":"/Users/sumeet/Documents/Xirkit Parent/XirkitOnboard/work/teensy-4-1/07_cad/part.step","views_png":"/Users/sumeet/Documents/Xirkit Parent/XirkitOnboard/work/teensy-4-1/07_cad/views.png","export_stl":"teensy-4-1.stl","assumptions":["feature Program pushbutton: button y position read from the drawing (centred)","feature i.MX RT1062 BGA: 12×12 mm package per the RT1062 data sheet; placement from the photo; height not given"],"export_step":"teensy-4-1.step","envelope_complete":false},"chips":[{"id":"u1","mpn":"MIMXRT1062DVJ6B","src":{"page":19,"quote":"- IMXRT1060 Errata Rev B - Applies to Teensy 4.1 after July 2021","method":"derived"},"note":"DVJ6A before April 2021 (errata Rev A)","role":"main_processor","manufacturer":"NXP"},{"id":"flash","mpn":"W25Q64JV-DTR (8 MB)","src":{"page":19,"quote":"- W25Q64JV-DTR Datasheet - Flash memory chip","method":"text"},"role":"flash_memory","manufacturer":"Winbond"},{"id":"phy","mpn":"DP83825I","src":{"page":19,"quote":"- DP83825i Datasheet - Ethernet PHY chip","method":"text"},"note":"absent on TEENSY41_NE","role":"ethernet_phy","manufacturer":"Texas Instruments"},{"id":"u2","mpn":"GD32E230F8 (after June 2022)","src":{"page":19,"quote":"Teensy 4.1 manufactured after June 2022 has U2 replaced by GD32E230F8. See this forum thread for new JTAG pin locations.","method":"text"},"role":"bootloader_chip","manufacturer":"GigaDevice"},{"id":"u4","mpn":"TLV75533P (after March 2023; earlier TLV75733P / NCV8186AMN330TAG)","src":{"page":19,"quote":"Teensy 4.1 manufactured after March 2023 has U4 replaced by TLV75533P, D1-D2 replaced by BAT54CTB6, and a different SD socket (J2).","method":"text"},"role":"ldo_regulator","manufacturer":"Texas Instruments"}],"fields":{"fpu":{"src":{"page":3,"quote":"- Float point math unit, 64 & 32 bits","method":"text"},"unit":null,"value":"single + double precision"},"usb":{"src":{"page":3,"quote":"- USB device 480 Mbit/sec & USB host 480 Mbit/sec","method":"text"},"unit":null,"value":"USB Micro-B device 480 Mbit/s + 5-pin USB host 480 Mbit/s"},"sram_kb":{"src":{"page":3,"quote":"- 7936K Flash, 1024K RAM (512K tightly coupled), 4K EEPROM (emulated)","method":"text"},"orig":{"unit":"KB","value":1024},"unit":"KiB","value":1024},"ethernet":{"src":{"page":3,"quote":"- Ethernet 10/100 Mbit with DP83825 PHY","method":"text"},"unit":null,"value":"10/100 Mbit, DP83825 PHY (6-pin header, jack kit separate)"},"flash_kb":{"src":{"page":3,"quote":"- 7936K Flash, 1024K RAM (512K tightly coupled), 4K EEPROM (emulated)","method":"text"},"orig":{"unit":"KB","value":7936},"unit":"KiB","value":7936},"mcu_core":{"src":{"page":3,"quote":"- ARM Cortex-M7 at 600 MHz","method":"text"},"unit":null,"value":"Arm Cortex-M7"},"wireless":{"src":{"page":3,"quote":"- Ethernet 10/100 Mbit with DP83825 PHY","method":"derived"},"unit":null,"value":"none"},"can_count":{"src":{"page":3,"quote":"- 3 CAN Bus (1 with CAN FD)","method":"text"},"unit":null,"value":3},"clock_mhz":{"src":{"page":3,"quote":"- ARM Cortex-M7 at 600 MHz","method":"text"},"orig":{"unit":"MHz","value":600},"unit":"Hz","value":600000000},"eeprom_kb":{"src":{"page":3,"quote":"- 7936K Flash, 1024K RAM (512K tightly coupled), 4K EEPROM (emulated)","method":"text"},"orig":{"unit":"KB","value":4},"unit":"KiB","value":4},"i2c_count":{"src":{"page":3,"quote":"- 8 serial, 3 SPI, 3 I2C ports","method":"derived"},"unit":null,"value":3},"i2s_count":{"src":{"page":3,"quote":"- 2 I2S/TDM and 1 S/PDIF digital audio port","method":"derived"},"unit":null,"value":2},"spi_count":{"src":{"page":3,"quote":"- 8 serial, 3 SPI, 3 I2C ports","method":"derived"},"unit":null,"value":3},"gpio_count":{"src":{"page":3,"quote":"| Total I/O Pins | 55 | 40 |","method":"table","table_id":"3_1"},"unit":null,"value":55},"io_voltage":{"src":{"page":7,"quote":"All digital pins can act at output. The pinMode function with OUTPUT or OUTPUT_OPENDRAIN must be used to configure these pins to output mode. The digitalWrite and digitalToggle functions are used to control the pin while in output mode. Output HIGH is 3.3V. The recommended maximum output current is","method":"text"},"unit":"V","value":3.3},"uart_count":{"src":{"page":3,"quote":"| Serial Ports | 8 | 7 |","method":"table","table_id":"3_1"},"unit":null,"value":8},"adc_channels":{"src":{"page":3,"quote":"| Analog Inputs | 18 | 14 |","method":"table","table_id":"3_1"},"unit":null,"value":18},"pwm_channels":{"src":{"page":3,"quote":"| PWM Pins | 35 | 31 |","method":"table","table_id":"3_1"},"unit":null,"value":35},"encoder_count":{"src":{"page":13,"quote":"These extra timers allow delays, analog sample rate timing, carrier modulation, and other special timing tasks to be performed, without consuming any of the normal PWM-oriented timers. GPT1 - Generic 32 bit timer GPT2 - Generic Generic 32 bit Timer Quadrature Encoders - 4 special timers are meant fo","method":"derived"},"unit":null,"value":4},"hole_diameter":{"src":{"page":19,"quote":"Finished hole diameter is 0.965mm (59 locations) and 0.762mm (6 locations).","method":"text"},"unit":null,"value":"0.965 mm (59 holes), 0.762 mm (6 holes)"},"input_voltage":{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived"},"unit":null,"value":"VIN 3.6–5.5 V or USB 5 V"},"internal_gpio":{"src":{"page":7,"quote":"Pin 13 has an orange LED connected. The LED can be very convenient to show status info. When pin 13 is used as an input, the external signal must be able to drive the LED when logic HIGH. pinMode INPUT_PULLUP should not be used with pin 13.","method":"text"},"unit":null,"value":["pin 13: orange LED"]},"regulator_output":{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived"},"unit":null,"value":"3.3 V, 250 mA max for external use"},"adc_resolution_bits":{"src":{"page":8,"quote":"18 pins can be used an analog inputs, for reading sensors or other analog signals. Basic analog input is done with the analogRead function. The default resolution is 10 bits (input range 0 to 1023), but can be adjusted with analogReadResolution. The hardware allows up to 12 bits of resolution, but i","method":"text"},"unit":null,"value":12},"software_frameworks":{"src":{"page":4,"quote":"- Teensy 4.x: {Arduino}/hardware/teensy/avr/cores/teensy4/Makefile","method":"derived"},"unit":null,"value":["Arduino (Teensyduino)","Makefile / command line"]}},"groups":{"io":["P23","P22","P21","P20","P19","P18","P17","P16","P15","P14","P13","P41","P40","P39","P38","P37","P36","P35","P34","P33","P0","P1","P2","P3","P4","P5","P6","P7","P8","P9","P10","P11","P12","P24","P25","P26","P27","P28","P29","P30","P31","P32","P42","P43","P44","P45","P46","P47","P48","P49","P50","P51","P52","P53","P54"],"all":["VIN","GND_T1","3V3_T","P23","P22","P21","P20","P19","P18","P17","P16","P15","P14","P13","GND_T2","P41","P40","P39","P38","P37","P36","P35","P34","P33","GND_B1","P0","P1","P2","P3","P4","P5","P6","P7","P8","P9","P10","P11","P12","3V3_B","P24","P25","P26","P27","P28","P29","P30","P31","P32","P42","P43","P44","P45","P46","P47","P48","P49","P50","P51","P52","P53","P54","ONOFF","PROGRAM","GND_I","3V3_I","VBAT","UH_5V","UH_DM","UH_DP","UH_GND1","UH_GND2","ETH_RXP","ETH_RXN","ETH_LED","ETH_GND","ETH_TXN","ETH_TXP","VUSB","Q_3V3_1","Q_GND"],"analog":["P23","P22","P21","P20","P19","P18","P17","P16","P15","P14","P41","P40","P39","P38","P24","P25","P26","P27"]},"source":{"url":"https://www.pjrc.com/store/teensy41.html","pages":22,"sha256":"00bbe5ce5ab5e36b1d9678f5914530f39def67ab9ccaae02a61934790b9e7363","onboarded_at":"2026-09-25T10:47:25+00:00"},"coverage":{"pct":100,"score":"42/42","passed":true,"explained_nulls":["operating_temperature","holes","weight"]},"entities":[{"id":"VIN","attrs":{"edge":"top","kind":"power_in","label":"VIN","position":"T1","connector":"header_top","designator":"VIN"},"sources":[{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"entities_pins.json"}],"attr_src":{"edge":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"entities_pins.json"},"kind":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"entities_pins.json"},"label":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"entities_pins.json"},"position":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"entities_pins.json"},"connector":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"entities_pins.json"},"designator":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"entities_pins.json"}},"functions":[],"electrical":{"input_voltage":[{"max":5.5,"min":3.6,"src":{"page":21,"quote":"Vin (3.6 to 5.5 volts)","method":"derived","fragment":"ratings_board.json"},"via":"direct","unit":"V","category":"operating","parameter":"VIN"}]},"entity_type":"pin"},{"id":"GND_T1","attrs":{"edge":"top","kind":"ground","label":"GND","position":"T2","connector":"header_top","designator":"GND_T1"},"sources":[{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"entities_pins.json"}],"attr_src":{"edge":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"entities_pins.json"},"kind":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"entities_pins.json"},"label":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"entities_pins.json"},"position":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"entities_pins.json"},"connector":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"entities_pins.json"},"designator":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"entities_pins.json"}},"functions":[],"electrical":{},"entity_type":"pin"},{"id":"3V3_T","attrs":{"edge":"top","kind":"power_out","label":"3.3V","position":"T3","connector":"header_top","designator":"3V3_T"},"sources":[{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"entities_pins.json"}],"attr_src":{"edge":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"entities_pins.json"},"kind":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"entities_pins.json"},"label":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"entities_pins.json"},"position":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"entities_pins.json"},"connector":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"entities_pins.json"},"designator":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"entities_pins.json"}},"functions":[],"electrical":{"output_current":[{"max":0.25,"src":{"page":14,"quote":"The recommended maximum for external 3.3V usage is 250mA.","method":"text","fragment":"ratings_board.json"},"via":"direct","orig":{"max":250,"unit":"mA"},"unit":"A","category":"operating","parameter":"3.3V external load (recommended max)"}],"output_voltage":[{"src":{"page":14,"quote":"Teensy 4.1 has a voltage regulator which reduces the 5V VUSB / VIN power to 3.3V for use by the main processor and most other parts.","method":"text","fragment":"ratings_board.json"},"typ":3.3,"via":"direct","unit":"V","category":"operating","parameter":"3.3V rail"}]},"entity_type":"pin"},{"id":"P23","attrs":{"edge":"top","kind":"analog","label":"23","number":23,"chip_pin":"GPIO_AD_B1_09","position":"T4","alt_label":"A9","connector":"header_top","designator":"P23","power_domain":"NVCC_GPIO","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN23_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_09","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN23_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_09","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN23_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_09","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN23_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_09","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN23_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_09","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN23_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_09","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN23_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_09","method":"text","fragment":"entities_pins.json"},"alt_label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN23_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_09","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN23_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_09","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN23_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_09","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_AD_B1_09","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN23_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_09","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_AD_B1_09","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D23","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"A9 (12-bit ADC, 0–3.3 V)","category":"adc"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"PWM (FlexPWM4 Module1)","category":"pwm"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"CRX1","category":"can"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"MCLK1","category":"i2s"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"CAN1","category":"can"},{"src":{"page":106,"quote":"| GPIO_AD_B1_09 | M13 | NVCC_GPIO | Digital GPIO | ALT5 | GPIO1.IO[25] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"106_1"},"via":"chip u1 GPIO_AD_B1_09","note":"default (reset) mux function","signal":"GPIO1.IO[25]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_AD_B1_09","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_09","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_09","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_09","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_09","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B1_09","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_AD_B1_09","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_AD_B1_09","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_09","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B1_09","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"adc_input_range":[{"max":3.3,"min":0,"src":{"page":8,"quote":"The analog input range is fixed at 0 to 3.3V. On Teensy 4.1, the analogReference() function has no effect. The analog pins are not 5V tolerant. Do not drive any analog pin higher than 3.3 volts.","method":"text","fragment":"ratings_board.json"},"via":"group:analog","unit":"V","category":"operating","parameter":"Analog input range","conditions":"fixed; analogReference() has no effect"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P22","attrs":{"edge":"top","kind":"analog","label":"22","number":22,"chip_pin":"GPIO_AD_B1_08","position":"T5","alt_label":"A8","connector":"header_top","designator":"P22","power_domain":"NVCC_GPIO","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN22_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_08","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN22_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_08","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN22_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_08","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN22_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_08","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN22_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_08","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN22_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_08","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN22_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_08","method":"text","fragment":"entities_pins.json"},"alt_label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN22_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_08","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN22_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_08","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN22_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_08","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_AD_B1_08","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN22_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_08","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_AD_B1_08","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D22","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"A8 (12-bit ADC, 0–3.3 V)","category":"adc"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"PWM (FlexPWM4 Module0)","category":"pwm"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"CTX1","category":"can"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"CAN1","category":"can"},{"src":{"page":106,"quote":"| GPIO_AD_B1_08 | H13 | NVCC_GPIO | Digital GPIO | ALT5 | GPIO1.IO[24] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"106_1"},"via":"chip u1 GPIO_AD_B1_08","note":"default (reset) mux function","signal":"GPIO1.IO[24]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_AD_B1_08","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_08","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_08","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_08","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_08","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B1_08","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_AD_B1_08","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_AD_B1_08","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_08","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B1_08","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"adc_input_range":[{"max":3.3,"min":0,"src":{"page":8,"quote":"The analog input range is fixed at 0 to 3.3V. On Teensy 4.1, the analogReference() function has no effect. The analog pins are not 5V tolerant. Do not drive any analog pin higher than 3.3 volts.","method":"text","fragment":"ratings_board.json"},"via":"group:analog","unit":"V","category":"operating","parameter":"Analog input range","conditions":"fixed; analogReference() has no effect"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P21","attrs":{"edge":"top","kind":"analog","label":"21","number":21,"chip_pin":"GPIO_AD_B1_11","position":"T6","alt_label":"A7","connector":"header_top","designator":"P21","power_domain":"NVCC_GPIO","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN21_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_11","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN21_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_11","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN21_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_11","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN21_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_11","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN21_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_11","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN21_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_11","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN21_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_11","method":"text","fragment":"entities_pins.json"},"alt_label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN21_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_11","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN21_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_11","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN21_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_11","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_AD_B1_11","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN21_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_11","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_AD_B1_11","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D21","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"A7 (12-bit ADC, 0–3.3 V)","category":"adc"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"RX5","category":"uart"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"BCLK1","category":"i2s"},{"src":{"page":106,"quote":"| GPIO_AD_B1_11 | J13 | NVCC_GPIO | Digital GPIO | ALT5 | GPIO1.IO[27] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"106_1"},"via":"chip u1 GPIO_AD_B1_11","note":"default (reset) mux function","signal":"GPIO1.IO[27]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_AD_B1_11","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_11","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_11","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_11","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_11","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B1_11","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_AD_B1_11","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_AD_B1_11","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_11","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B1_11","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"adc_input_range":[{"max":3.3,"min":0,"src":{"page":8,"quote":"The analog input range is fixed at 0 to 3.3V. On Teensy 4.1, the analogReference() function has no effect. The analog pins are not 5V tolerant. Do not drive any analog pin higher than 3.3 volts.","method":"text","fragment":"ratings_board.json"},"via":"group:analog","unit":"V","category":"operating","parameter":"Analog input range","conditions":"fixed; analogReference() has no effect"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P20","attrs":{"edge":"top","kind":"analog","label":"20","number":20,"chip_pin":"GPIO_AD_B1_10","position":"T7","alt_label":"A6","connector":"header_top","designator":"P20","power_domain":"NVCC_GPIO","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN20_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_10","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN20_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_10","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN20_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_10","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN20_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_10","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN20_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_10","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN20_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_10","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN20_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_10","method":"text","fragment":"entities_pins.json"},"alt_label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN20_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_10","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN20_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_10","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN20_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_10","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_AD_B1_10","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN20_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_10","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_AD_B1_10","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D20","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"A6 (12-bit ADC, 0–3.3 V)","category":"adc"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"TX5","category":"uart"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"LRCLK1","category":"i2s"},{"src":{"page":106,"quote":"| GPIO_AD_B1_10 | L13 | NVCC_GPIO | Digital GPIO | ALT5 | GPIO1.IO[26] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"106_1"},"via":"chip u1 GPIO_AD_B1_10","note":"default (reset) mux function","signal":"GPIO1.IO[26]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_AD_B1_10","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_10","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_10","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_10","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_10","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B1_10","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_AD_B1_10","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_AD_B1_10","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_10","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B1_10","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"adc_input_range":[{"max":3.3,"min":0,"src":{"page":8,"quote":"The analog input range is fixed at 0 to 3.3V. On Teensy 4.1, the analogReference() function has no effect. The analog pins are not 5V tolerant. Do not drive any analog pin higher than 3.3 volts.","method":"text","fragment":"ratings_board.json"},"via":"group:analog","unit":"V","category":"operating","parameter":"Analog input range","conditions":"fixed; analogReference() has no effect"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P19","attrs":{"edge":"top","kind":"analog","label":"19","number":19,"chip_pin":"GPIO_AD_B1_00","position":"T8","alt_label":"A5","connector":"header_top","designator":"P19","power_domain":"NVCC_GPIO","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN19_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_00","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN19_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_00","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN19_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_00","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN19_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_00","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN19_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_00","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN19_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_00","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN19_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_00","method":"text","fragment":"entities_pins.json"},"alt_label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN19_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_00","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN19_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_00","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN19_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_00","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_AD_B1_00","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN19_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_00","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_AD_B1_00","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D19","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"A5 (12-bit ADC, 0–3.3 V)","category":"adc"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"PWM (QuadTimer3 Module0)","category":"pwm"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"SCL","category":"i2c"},{"src":{"page":105,"quote":"| GPIO_AD_B1_00 | J11 | NVCC_GPIO | Digital GPIO | ALT5 | GPIO1.IO[16] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"105_1"},"via":"chip u1 GPIO_AD_B1_00","note":"default (reset) mux function","signal":"GPIO1.IO[16]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_AD_B1_00","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_00","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_00","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_00","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_00","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B1_00","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_AD_B1_00","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_AD_B1_00","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_00","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B1_00","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"adc_input_range":[{"max":3.3,"min":0,"src":{"page":8,"quote":"The analog input range is fixed at 0 to 3.3V. On Teensy 4.1, the analogReference() function has no effect. The analog pins are not 5V tolerant. Do not drive any analog pin higher than 3.3 volts.","method":"text","fragment":"ratings_board.json"},"via":"group:analog","unit":"V","category":"operating","parameter":"Analog input range","conditions":"fixed; analogReference() has no effect"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P18","attrs":{"edge":"top","kind":"analog","label":"18","number":18,"chip_pin":"GPIO_AD_B1_01","position":"T9","alt_label":"A4","connector":"header_top","designator":"P18","power_domain":"NVCC_GPIO","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN18_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_01","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN18_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_01","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN18_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_01","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN18_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_01","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN18_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_01","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN18_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_01","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN18_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_01","method":"text","fragment":"entities_pins.json"},"alt_label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN18_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_01","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN18_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_01","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN18_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_01","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_AD_B1_01","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN18_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_01","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_AD_B1_01","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D18","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"A4 (12-bit ADC, 0–3.3 V)","category":"adc"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"PWM (QuadTimer3 Module1)","category":"pwm"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"SDA","category":"i2c"},{"src":{"page":105,"quote":"| GPIO_AD_B1_01 | K11 | NVCC_GPIO | Digital GPIO | ALT5 | GPIO1.IO[17] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"105_1"},"via":"chip u1 GPIO_AD_B1_01","note":"default (reset) mux function","signal":"GPIO1.IO[17]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_AD_B1_01","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_01","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_01","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_01","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_01","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B1_01","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_AD_B1_01","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_AD_B1_01","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_01","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B1_01","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"adc_input_range":[{"max":3.3,"min":0,"src":{"page":8,"quote":"The analog input range is fixed at 0 to 3.3V. On Teensy 4.1, the analogReference() function has no effect. The analog pins are not 5V tolerant. Do not drive any analog pin higher than 3.3 volts.","method":"text","fragment":"ratings_board.json"},"via":"group:analog","unit":"V","category":"operating","parameter":"Analog input range","conditions":"fixed; analogReference() has no effect"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P17","attrs":{"edge":"top","kind":"analog","label":"17","number":17,"chip_pin":"GPIO_AD_B1_06","position":"T10","alt_label":"A3","connector":"header_top","designator":"P17","power_domain":"NVCC_GPIO","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN17_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_06","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN17_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_06","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN17_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_06","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN17_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_06","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN17_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_06","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN17_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_06","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN17_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_06","method":"text","fragment":"entities_pins.json"},"alt_label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN17_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_06","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN17_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_06","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN17_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_06","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_AD_B1_06","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN17_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_06","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_AD_B1_06","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D17","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"A3 (12-bit ADC, 0–3.3 V)","category":"adc"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"TX4","category":"uart"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"SDA1","category":"i2c"},{"src":{"page":106,"quote":"| GPIO_AD_B1_06 | J12 | NVCC_GPIO | Digital GPIO | ALT5 | GPIO1.IO[22] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"106_1"},"via":"chip u1 GPIO_AD_B1_06","note":"default (reset) mux function","signal":"GPIO1.IO[22]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_AD_B1_06","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_06","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_06","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_06","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_06","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B1_06","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_AD_B1_06","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_AD_B1_06","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_06","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B1_06","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"adc_input_range":[{"max":3.3,"min":0,"src":{"page":8,"quote":"The analog input range is fixed at 0 to 3.3V. On Teensy 4.1, the analogReference() function has no effect. The analog pins are not 5V tolerant. Do not drive any analog pin higher than 3.3 volts.","method":"text","fragment":"ratings_board.json"},"via":"group:analog","unit":"V","category":"operating","parameter":"Analog input range","conditions":"fixed; analogReference() has no effect"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P16","attrs":{"edge":"top","kind":"analog","label":"16","number":16,"chip_pin":"GPIO_AD_B1_07","position":"T11","alt_label":"A2","connector":"header_top","designator":"P16","power_domain":"NVCC_GPIO","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN16_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_07","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN16_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_07","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN16_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_07","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN16_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_07","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN16_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_07","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN16_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_07","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN16_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_07","method":"text","fragment":"entities_pins.json"},"alt_label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN16_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_07","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN16_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_07","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN16_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_07","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_AD_B1_07","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN16_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_07","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_AD_B1_07","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D16","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"A2 (12-bit ADC, 0–3.3 V)","category":"adc"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"RX4","category":"uart"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"SCL1","category":"i2c"},{"src":{"page":106,"quote":"| GPIO_AD_B1_07 | K10 | NVCC_GPIO | Digital GPIO | ALT5 | GPIO1.IO[23] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"106_1"},"via":"chip u1 GPIO_AD_B1_07","note":"default (reset) mux function","signal":"GPIO1.IO[23]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_AD_B1_07","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_07","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_07","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_07","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_07","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B1_07","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_AD_B1_07","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_AD_B1_07","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_07","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B1_07","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"adc_input_range":[{"max":3.3,"min":0,"src":{"page":8,"quote":"The analog input range is fixed at 0 to 3.3V. On Teensy 4.1, the analogReference() function has no effect. The analog pins are not 5V tolerant. Do not drive any analog pin higher than 3.3 volts.","method":"text","fragment":"ratings_board.json"},"via":"group:analog","unit":"V","category":"operating","parameter":"Analog input range","conditions":"fixed; analogReference() has no effect"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P15","attrs":{"edge":"top","kind":"analog","label":"15","number":15,"chip_pin":"GPIO_AD_B1_03","position":"T12","alt_label":"A1","connector":"header_top","designator":"P15","power_domain":"NVCC_GPIO","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN15_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_03","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN15_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_03","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN15_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_03","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN15_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_03","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN15_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_03","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN15_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_03","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN15_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_03","method":"text","fragment":"entities_pins.json"},"alt_label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN15_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_03","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN15_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_03","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN15_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_03","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_AD_B1_03","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN15_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_03","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_AD_B1_03","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D15","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"A1 (12-bit ADC, 0–3.3 V)","category":"adc"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"PWM (QuadTimer3 Module3)","category":"pwm"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"RX3","category":"uart"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"S/PDIF IN","category":"audio"},{"src":{"page":105,"quote":"| GPIO_AD_B1_03 | M12 | NVCC_GPIO | Digital GPIO | ALT5 | GPIO1.IO[19] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"105_1"},"via":"chip u1 GPIO_AD_B1_03","note":"default (reset) mux function","signal":"GPIO1.IO[19]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_AD_B1_03","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_03","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_03","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_03","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_03","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B1_03","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_AD_B1_03","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_AD_B1_03","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_03","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B1_03","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"adc_input_range":[{"max":3.3,"min":0,"src":{"page":8,"quote":"The analog input range is fixed at 0 to 3.3V. On Teensy 4.1, the analogReference() function has no effect. The analog pins are not 5V tolerant. Do not drive any analog pin higher than 3.3 volts.","method":"text","fragment":"ratings_board.json"},"via":"group:analog","unit":"V","category":"operating","parameter":"Analog input range","conditions":"fixed; analogReference() has no effect"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P14","attrs":{"edge":"top","kind":"analog","label":"14","number":14,"chip_pin":"GPIO_AD_B1_02","position":"T13","alt_label":"A0","connector":"header_top","designator":"P14","power_domain":"NVCC_GPIO","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN14_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_02","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN14_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_02","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN14_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_02","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN14_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_02","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN14_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_02","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN14_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_02","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN14_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_02","method":"text","fragment":"entities_pins.json"},"alt_label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN14_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_02","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN14_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_02","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN14_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_02","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_AD_B1_02","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN14_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_02","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_AD_B1_02","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D14","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"A0 (12-bit ADC, 0–3.3 V)","category":"adc"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"PWM (QuadTimer3 Module2)","category":"pwm"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"TX3","category":"uart"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"S/PDIF OUT","category":"audio"},{"src":{"page":105,"quote":"| GPIO_AD_B1_02 | L11 | NVCC_GPIO | Digital GPIO | ALT5 | GPIO1.IO[18] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"105_1"},"via":"chip u1 GPIO_AD_B1_02","note":"default (reset) mux function","signal":"GPIO1.IO[18]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_AD_B1_02","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_02","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_02","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_02","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_02","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B1_02","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_AD_B1_02","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_AD_B1_02","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_02","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B1_02","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"adc_input_range":[{"max":3.3,"min":0,"src":{"page":8,"quote":"The analog input range is fixed at 0 to 3.3V. On Teensy 4.1, the analogReference() function has no effect. The analog pins are not 5V tolerant. Do not drive any analog pin higher than 3.3 volts.","method":"text","fragment":"ratings_board.json"},"via":"group:analog","unit":"V","category":"operating","parameter":"Analog input range","conditions":"fixed; analogReference() has no effect"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P13","attrs":{"led":"orange LED on pin 13","edge":"top","kind":"gpio","label":"13","number":13,"chip_pin":"GPIO_B0_03","position":"T14","connector":"header_top","designator":"P13","power_domain":"NVCC_GPIO","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN13_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_03","method":"text","fragment":"entities_pins.json"}],"attr_src":{"led":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN13_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_03","method":"text","fragment":"entities_pins.json"},"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN13_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_03","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN13_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_03","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN13_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_03","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN13_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_03","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN13_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_03","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN13_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_03","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN13_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_03","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN13_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_03","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_B0_03","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN13_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_03","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_B0_03","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D13","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"PWM (QuadTimer2 Module0)","category":"pwm"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"SCK","category":"spi"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"LED_BUILTIN (orange)","category":"led"},{"src":{"page":106,"quote":"| GPIO_B0_03 | D8 | NVCC_GPIO | Digital GPIO | ALT5 | GPIO2.IO[3] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"106_1"},"via":"chip u1 GPIO_B0_03","note":"default (reset) mux function","signal":"GPIO2.IO[3]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_B0_03","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_03","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_03","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_03","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_03","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_B0_03","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_B0_03","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_B0_03","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_03","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_B0_03","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"GND_T2","attrs":{"edge":"top","kind":"ground","label":"GND","position":"T15","connector":"header_top","designator":"GND_T2"},"sources":[{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"entities_pins.json"}],"attr_src":{"edge":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"entities_pins.json"},"kind":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"entities_pins.json"},"label":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"entities_pins.json"},"position":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"entities_pins.json"},"connector":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"entities_pins.json"},"designator":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"entities_pins.json"}},"functions":[],"electrical":{},"entity_type":"pin"},{"id":"P41","attrs":{"edge":"top","kind":"analog","label":"41","number":41,"chip_pin":"GPIO_AD_B1_05","position":"T16","alt_label":"A17","connector":"header_top","designator":"P41","power_domain":"NVCC_GPIO","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN41_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_05","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN41_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_05","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN41_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_05","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN41_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_05","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN41_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_05","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN41_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_05","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN41_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_05","method":"text","fragment":"entities_pins.json"},"alt_label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN41_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_05","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN41_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_05","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN41_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_05","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_AD_B1_05","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN41_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_05","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_AD_B1_05","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D41","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"A17 (12-bit ADC, 0–3.3 V)","category":"adc"},{"src":{"page":106,"quote":"| GPIO_AD_B1_05 | K12 | NVCC_GPIO | Digital GPIO | ALT5 | GPIO1.IO[21] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"106_1"},"via":"chip u1 GPIO_AD_B1_05","note":"default (reset) mux function","signal":"GPIO1.IO[21]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_AD_B1_05","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_05","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_05","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_05","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_05","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B1_05","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_AD_B1_05","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_AD_B1_05","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_05","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B1_05","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"adc_input_range":[{"max":3.3,"min":0,"src":{"page":8,"quote":"The analog input range is fixed at 0 to 3.3V. On Teensy 4.1, the analogReference() function has no effect. The analog pins are not 5V tolerant. Do not drive any analog pin higher than 3.3 volts.","method":"text","fragment":"ratings_board.json"},"via":"group:analog","unit":"V","category":"operating","parameter":"Analog input range","conditions":"fixed; analogReference() has no effect"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P40","attrs":{"edge":"top","kind":"analog","label":"40","number":40,"chip_pin":"GPIO_AD_B1_04","position":"T17","alt_label":"A16","connector":"header_top","designator":"P40","power_domain":"NVCC_GPIO","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN40_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_04","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN40_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_04","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN40_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_04","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN40_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_04","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN40_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_04","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN40_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_04","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN40_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_04","method":"text","fragment":"entities_pins.json"},"alt_label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN40_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_04","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN40_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_04","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN40_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_04","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_AD_B1_04","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN40_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_04","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_AD_B1_04","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D40","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"A16 (12-bit ADC, 0–3.3 V)","category":"adc"},{"src":{"page":105,"quote":"| GPIO_AD_B1_04 | L12 | NVCC_GPIO | Digital GPIO | ALT5 | GPIO1.IO[20] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"105_1"},"via":"chip u1 GPIO_AD_B1_04","note":"default (reset) mux function","signal":"GPIO1.IO[20]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_AD_B1_04","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_04","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_04","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_04","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_04","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B1_04","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_AD_B1_04","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_AD_B1_04","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_04","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B1_04","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"adc_input_range":[{"max":3.3,"min":0,"src":{"page":8,"quote":"The analog input range is fixed at 0 to 3.3V. On Teensy 4.1, the analogReference() function has no effect. The analog pins are not 5V tolerant. Do not drive any analog pin higher than 3.3 volts.","method":"text","fragment":"ratings_board.json"},"via":"group:analog","unit":"V","category":"operating","parameter":"Analog input range","conditions":"fixed; analogReference() has no effect"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P39","attrs":{"edge":"top","kind":"analog","label":"39","number":39,"chip_pin":"GPIO_AD_B1_13","position":"T18","alt_label":"A15","connector":"header_top","designator":"P39","power_domain":"NVCC_GPIO","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN39_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_13","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN39_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_13","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN39_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_13","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN39_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_13","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN39_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_13","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN39_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_13","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN39_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_13","method":"text","fragment":"entities_pins.json"},"alt_label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN39_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_13","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN39_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_13","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN39_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_13","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_AD_B1_13","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN39_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_13","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_AD_B1_13","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D39","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"A15 (12-bit ADC, 0–3.3 V)","category":"adc"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"MISO1","category":"spi"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"OUT1A","category":"i2s"},{"src":{"page":106,"quote":"| GPIO_AD_B1_13 | H11 | NVCC_GPIO | Digital GPIO | ALT5 | GPIO1.IO[29] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"106_1"},"via":"chip u1 GPIO_AD_B1_13","note":"default (reset) mux function","signal":"GPIO1.IO[29]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_AD_B1_13","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_13","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_13","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_13","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_13","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B1_13","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_AD_B1_13","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_AD_B1_13","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_13","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B1_13","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"adc_input_range":[{"max":3.3,"min":0,"src":{"page":8,"quote":"The analog input range is fixed at 0 to 3.3V. On Teensy 4.1, the analogReference() function has no effect. The analog pins are not 5V tolerant. Do not drive any analog pin higher than 3.3 volts.","method":"text","fragment":"ratings_board.json"},"via":"group:analog","unit":"V","category":"operating","parameter":"Analog input range","conditions":"fixed; analogReference() has no effect"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P38","attrs":{"edge":"top","kind":"analog","label":"38","number":38,"chip_pin":"GPIO_AD_B1_12","position":"T19","alt_label":"A14","connector":"header_top","designator":"P38","power_domain":"NVCC_GPIO","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN38_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_12","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN38_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_12","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN38_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_12","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN38_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_12","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN38_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_12","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN38_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_12","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN38_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_12","method":"text","fragment":"entities_pins.json"},"alt_label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN38_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_12","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN38_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_12","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN38_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_12","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_AD_B1_12","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN38_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_12","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_AD_B1_12","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D38","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"A14 (12-bit ADC, 0–3.3 V)","category":"adc"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"CS1","category":"spi"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"IN1","category":"i2s"},{"src":{"page":106,"quote":"| GPIO_AD_B1_12 | H12 | NVCC_GPIO | Digital GPIO | ALT5 | GPIO1.IO[28] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"106_1"},"via":"chip u1 GPIO_AD_B1_12","note":"default (reset) mux function","signal":"GPIO1.IO[28]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_AD_B1_12","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_12","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_12","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_12","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_12","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B1_12","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_AD_B1_12","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_AD_B1_12","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_12","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B1_12","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"adc_input_range":[{"max":3.3,"min":0,"src":{"page":8,"quote":"The analog input range is fixed at 0 to 3.3V. On Teensy 4.1, the analogReference() function has no effect. The analog pins are not 5V tolerant. Do not drive any analog pin higher than 3.3 volts.","method":"text","fragment":"ratings_board.json"},"via":"group:analog","unit":"V","category":"operating","parameter":"Analog input range","conditions":"fixed; analogReference() has no effect"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P37","attrs":{"edge":"top","kind":"gpio","label":"37","number":37,"chip_pin":"GPIO_B1_03","position":"T20","connector":"header_top","designator":"P37","power_domain":"NVCC_GPIO","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN37_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_03","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN37_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_03","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN37_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_03","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN37_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_03","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN37_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_03","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN37_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_03","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN37_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_03","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN37_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_03","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN37_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_03","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_B1_03","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN37_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_03","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_B1_03","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D37","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"PWM (FlexPWM2 Module3)","category":"pwm"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"CS","category":"spi"},{"src":{"page":107,"quote":"| GPIO_B1_03 | D11 | NVCC_GPIO | Digital GPIO | ALT5 | GPIO2.IO[19] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"107_1"},"via":"chip u1 GPIO_B1_03","note":"default (reset) mux function","signal":"GPIO2.IO[19]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_B1_03","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B1_03","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B1_03","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B1_03","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B1_03","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_B1_03","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_B1_03","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_B1_03","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B1_03","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_B1_03","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P36","attrs":{"edge":"top","kind":"gpio","label":"36","number":36,"chip_pin":"GPIO_B1_02","position":"T21","connector":"header_top","designator":"P36","power_domain":"NVCC_GPIO","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN36_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_02","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN36_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_02","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN36_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_02","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN36_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_02","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN36_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_02","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN36_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_02","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN36_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_02","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN36_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_02","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN36_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_02","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_B1_02","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN36_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_02","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_B1_02","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D36","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"PWM (FlexPWM2 Module3)","category":"pwm"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"CS","category":"spi"},{"src":{"page":107,"quote":"| GPIO_B1_02 | C11 | NVCC_GPIO | Digital GPIO | ALT5 | GPIO2.IO[18] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"107_1"},"via":"chip u1 GPIO_B1_02","note":"default (reset) mux function","signal":"GPIO2.IO[18]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_B1_02","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B1_02","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B1_02","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B1_02","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B1_02","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_B1_02","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_B1_02","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_B1_02","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B1_02","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_B1_02","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P35","attrs":{"edge":"top","kind":"gpio","label":"35","number":35,"chip_pin":"GPIO_B1_12","position":"T22","connector":"header_top","designator":"P35","power_domain":"NVCC_GPIO","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN35_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_12","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN35_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_12","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN35_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_12","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN35_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_12","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN35_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_12","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN35_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_12","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN35_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_12","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN35_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_12","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN35_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_12","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_B1_12","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN35_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_12","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_B1_12","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D35","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"TX8","category":"uart"},{"src":{"page":107,"quote":"| GPIO_B1_12 | D13 | NVCC_GPIO | Digital GPIO | ALT5 | GPIO2.IO[28] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"107_1"},"via":"chip u1 GPIO_B1_12","note":"default (reset) mux function","signal":"GPIO2.IO[28]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_B1_12","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B1_12","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B1_12","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B1_12","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B1_12","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_B1_12","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_B1_12","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_B1_12","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B1_12","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_B1_12","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P34","attrs":{"edge":"top","kind":"gpio","label":"34","number":34,"chip_pin":"GPIO_B1_13","position":"T23","connector":"header_top","designator":"P34","power_domain":"NVCC_GPIO","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN34_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_13","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN34_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_13","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN34_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_13","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN34_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_13","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN34_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_13","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN34_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_13","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN34_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_13","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN34_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_13","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN34_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_13","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_B1_13","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN34_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_13","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_B1_13","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D34","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"RX8","category":"uart"},{"src":{"page":107,"quote":"| GPIO_B1_13 | D14 | NVCC_GPIO | Digital GPIO | ALT5 | GPIO2.IO[29] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"107_1"},"via":"chip u1 GPIO_B1_13","note":"default (reset) mux function","signal":"GPIO2.IO[29]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_B1_13","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B1_13","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B1_13","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B1_13","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B1_13","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_B1_13","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_B1_13","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_B1_13","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B1_13","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_B1_13","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P33","attrs":{"edge":"top","kind":"gpio","label":"33","number":33,"chip_pin":"GPIO_EMC_07","position":"T24","connector":"header_top","designator":"P33","power_domain":"NVCC_EMC","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN33_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_07","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN33_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_07","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN33_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_07","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN33_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_07","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN33_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_07","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN33_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_07","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN33_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_07","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN33_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_07","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN33_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_07","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_EMC_07","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN33_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_07","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_EMC_07","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D33","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"PWM (FlexPWM2 Module0)","category":"pwm"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"MCLK2","category":"i2s"},{"src":{"page":108,"quote":"| GPIO_EMC_07 | H4 | NVCC_EMC | Digital GPIO | ALT5 | GPIO4.IO[7] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"108_1"},"via":"chip u1 GPIO_EMC_07","note":"default (reset) mux function","signal":"GPIO4.IO[7]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_EMC_07","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_07","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_07","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_07","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_07","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_EMC_07","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_EMC_07","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_EMC_07","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_07","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_EMC_07","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"GND_B1","attrs":{"edge":"bottom","kind":"ground","label":"GND","position":"B1","connector":"header_bottom","designator":"GND_B1"},"sources":[{"page":21,"quote":"| GND PWM CRX2 CS1 RX1 PWM CTX2 MISO1 TX1 PWM OUT2 PWM LRCLK2 PWM BCLK2 PWM IN2 PWM OUT1D PWM OUT1A RX2 PWM IN1 TX2 Interrupt capability. All digital pins have 0 1 2 3 4 5 6 7 8 9 PWM OUT1C 10 PWM MQSR CS 11 PWM CTX1 MOSI 12 PWM MQSL MISO 3.3V 24 PWM SCL2 TX6 A10 25 PWM SDA2 RX6 A11 26 MOSI1 A12 27","method":"derived","fragment":"entities_pins.json"}],"attr_src":{"edge":{"page":21,"quote":"| GND PWM CRX2 CS1 RX1 PWM CTX2 MISO1 TX1 PWM OUT2 PWM LRCLK2 PWM BCLK2 PWM IN2 PWM OUT1D PWM OUT1A RX2 PWM IN1 TX2 Interrupt capability. All digital pins have 0 1 2 3 4 5 6 7 8 9 PWM OUT1C 10 PWM MQSR CS 11 PWM CTX1 MOSI 12 PWM MQSL MISO 3.3V 24 PWM SCL2 TX6 A10 25 PWM SDA2 RX6 A11 26 MOSI1 A12 27","method":"derived","fragment":"entities_pins.json"},"kind":{"page":21,"quote":"| GND PWM CRX2 CS1 RX1 PWM CTX2 MISO1 TX1 PWM OUT2 PWM LRCLK2 PWM BCLK2 PWM IN2 PWM OUT1D PWM OUT1A RX2 PWM IN1 TX2 Interrupt capability. All digital pins have 0 1 2 3 4 5 6 7 8 9 PWM OUT1C 10 PWM MQSR CS 11 PWM CTX1 MOSI 12 PWM MQSL MISO 3.3V 24 PWM SCL2 TX6 A10 25 PWM SDA2 RX6 A11 26 MOSI1 A12 27","method":"derived","fragment":"entities_pins.json"},"label":{"page":21,"quote":"| GND PWM CRX2 CS1 RX1 PWM CTX2 MISO1 TX1 PWM OUT2 PWM LRCLK2 PWM BCLK2 PWM IN2 PWM OUT1D PWM OUT1A RX2 PWM IN1 TX2 Interrupt capability. All digital pins have 0 1 2 3 4 5 6 7 8 9 PWM OUT1C 10 PWM MQSR CS 11 PWM CTX1 MOSI 12 PWM MQSL MISO 3.3V 24 PWM SCL2 TX6 A10 25 PWM SDA2 RX6 A11 26 MOSI1 A12 27","method":"derived","fragment":"entities_pins.json"},"position":{"page":21,"quote":"| GND PWM CRX2 CS1 RX1 PWM CTX2 MISO1 TX1 PWM OUT2 PWM LRCLK2 PWM BCLK2 PWM IN2 PWM OUT1D PWM OUT1A RX2 PWM IN1 TX2 Interrupt capability. All digital pins have 0 1 2 3 4 5 6 7 8 9 PWM OUT1C 10 PWM MQSR CS 11 PWM CTX1 MOSI 12 PWM MQSL MISO 3.3V 24 PWM SCL2 TX6 A10 25 PWM SDA2 RX6 A11 26 MOSI1 A12 27","method":"derived","fragment":"entities_pins.json"},"connector":{"page":21,"quote":"| GND PWM CRX2 CS1 RX1 PWM CTX2 MISO1 TX1 PWM OUT2 PWM LRCLK2 PWM BCLK2 PWM IN2 PWM OUT1D PWM OUT1A RX2 PWM IN1 TX2 Interrupt capability. All digital pins have 0 1 2 3 4 5 6 7 8 9 PWM OUT1C 10 PWM MQSR CS 11 PWM CTX1 MOSI 12 PWM MQSL MISO 3.3V 24 PWM SCL2 TX6 A10 25 PWM SDA2 RX6 A11 26 MOSI1 A12 27","method":"derived","fragment":"entities_pins.json"},"designator":{"page":21,"quote":"| GND PWM CRX2 CS1 RX1 PWM CTX2 MISO1 TX1 PWM OUT2 PWM LRCLK2 PWM BCLK2 PWM IN2 PWM OUT1D PWM OUT1A RX2 PWM IN1 TX2 Interrupt capability. All digital pins have 0 1 2 3 4 5 6 7 8 9 PWM OUT1C 10 PWM MQSR CS 11 PWM CTX1 MOSI 12 PWM MQSL MISO 3.3V 24 PWM SCL2 TX6 A10 25 PWM SDA2 RX6 A11 26 MOSI1 A12 27","method":"derived","fragment":"entities_pins.json"}},"functions":[],"electrical":{},"entity_type":"pin"},{"id":"P0","attrs":{"edge":"bottom","kind":"gpio","label":"0","number":0,"chip_pin":"GPIO_AD_B0_03","position":"B2","connector":"header_bottom","designator":"P0","power_domain":"NVCC_GPIO","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN0_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_03","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN0_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_03","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN0_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_03","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN0_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_03","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN0_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_03","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN0_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_03","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN0_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_03","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN0_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_03","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN0_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_03","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_AD_B0_03","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN0_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_03","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_AD_B0_03","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| GND PWM CRX2 CS1 RX1 PWM CTX2 MISO1 TX1 PWM OUT2 PWM LRCLK2 PWM BCLK2 PWM IN2 PWM OUT1D PWM OUT1A RX2 PWM IN1 TX2 Interrupt capability. All digital pins have 0 1 2 3 4 5 6 7 8 9 PWM OUT1C 10 PWM MQSR CS 11 PWM CTX1 MOSI 12 PWM MQSL MISO 3.3V 24 PWM SCL2 TX6 A10 25 PWM SDA2 RX6 A11 26 MOSI1 A12 27","method":"derived","fragment":"functions_pins.json"},"signal":"D0","category":"gpio"},{"src":{"page":21,"quote":"| GND PWM CRX2 CS1 RX1 PWM CTX2 MISO1 TX1 PWM OUT2 PWM LRCLK2 PWM BCLK2 PWM IN2 PWM OUT1D PWM OUT1A RX2 PWM IN1 TX2 Interrupt capability. All digital pins have 0 1 2 3 4 5 6 7 8 9 PWM OUT1C 10 PWM MQSR CS 11 PWM CTX1 MOSI 12 PWM MQSL MISO 3.3V 24 PWM SCL2 TX6 A10 25 PWM SDA2 RX6 A11 26 MOSI1 A12 27","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| GND PWM CRX2 CS1 RX1 PWM CTX2 MISO1 TX1 PWM OUT2 PWM LRCLK2 PWM BCLK2 PWM IN2 PWM OUT1D PWM OUT1A RX2 PWM IN1 TX2 Interrupt capability. All digital pins have 0 1 2 3 4 5 6 7 8 9 PWM OUT1C 10 PWM MQSR CS 11 PWM CTX1 MOSI 12 PWM MQSL MISO 3.3V 24 PWM SCL2 TX6 A10 25 PWM SDA2 RX6 A11 26 MOSI1 A12 27","method":"derived","fragment":"functions_pins.json"},"signal":"PWM (FlexPWM1 Module1)","category":"pwm"},{"src":{"page":21,"quote":"| GND PWM CRX2 CS1 RX1 PWM CTX2 MISO1 TX1 PWM OUT2 PWM LRCLK2 PWM BCLK2 PWM IN2 PWM OUT1D PWM OUT1A RX2 PWM IN1 TX2 Interrupt capability. All digital pins have 0 1 2 3 4 5 6 7 8 9 PWM OUT1C 10 PWM MQSR CS 11 PWM CTX1 MOSI 12 PWM MQSL MISO 3.3V 24 PWM SCL2 TX6 A10 25 PWM SDA2 RX6 A11 26 MOSI1 A12 27","method":"derived","fragment":"functions_pins.json"},"signal":"RX1","category":"uart"},{"src":{"page":21,"quote":"| GND PWM CRX2 CS1 RX1 PWM CTX2 MISO1 TX1 PWM OUT2 PWM LRCLK2 PWM BCLK2 PWM IN2 PWM OUT1D PWM OUT1A RX2 PWM IN1 TX2 Interrupt capability. All digital pins have 0 1 2 3 4 5 6 7 8 9 PWM OUT1C 10 PWM MQSR CS 11 PWM CTX1 MOSI 12 PWM MQSL MISO 3.3V 24 PWM SCL2 TX6 A10 25 PWM SDA2 RX6 A11 26 MOSI1 A12 27","method":"derived","fragment":"functions_pins.json"},"signal":"CS1","category":"spi"},{"src":{"page":21,"quote":"| GND PWM CRX2 CS1 RX1 PWM CTX2 MISO1 TX1 PWM OUT2 PWM LRCLK2 PWM BCLK2 PWM IN2 PWM OUT1D PWM OUT1A RX2 PWM IN1 TX2 Interrupt capability. All digital pins have 0 1 2 3 4 5 6 7 8 9 PWM OUT1C 10 PWM MQSR CS 11 PWM CTX1 MOSI 12 PWM MQSL MISO 3.3V 24 PWM SCL2 TX6 A10 25 PWM SDA2 RX6 A11 26 MOSI1 A12 27","method":"derived","fragment":"functions_pins.json"},"signal":"CRX2","category":"can"},{"src":{"page":21,"quote":"| GND PWM CRX2 CS1 RX1 PWM CTX2 MISO1 TX1 PWM OUT2 PWM LRCLK2 PWM BCLK2 PWM IN2 PWM OUT1D PWM OUT1A RX2 PWM IN1 TX2 Interrupt capability. All digital pins have 0 1 2 3 4 5 6 7 8 9 PWM OUT1C 10 PWM MQSR CS 11 PWM CTX1 MOSI 12 PWM MQSL MISO 3.3V 24 PWM SCL2 TX6 A10 25 PWM SDA2 RX6 A11 26 MOSI1 A12 27","method":"derived","fragment":"functions_pins.json"},"signal":"CAN2","category":"can"},{"src":{"page":105,"quote":"| GPIO_AD_B0_03 | G11 | NVCC_GPIO | Digital GPIO | ALT5 | GPIO1.IO[3] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"105_1"},"via":"chip u1 GPIO_AD_B0_03","note":"default (reset) mux function","signal":"GPIO1.IO[3]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_AD_B0_03","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B0_03","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B0_03","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B0_03","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B0_03","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B0_03","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_AD_B0_03","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_AD_B0_03","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B0_03","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B0_03","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P1","attrs":{"edge":"bottom","kind":"gpio","label":"1","number":1,"chip_pin":"GPIO_AD_B0_02","position":"B3","connector":"header_bottom","designator":"P1","power_domain":"NVCC_GPIO","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN1_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_02","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN1_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_02","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN1_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_02","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN1_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_02","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN1_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_02","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN1_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_02","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN1_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_02","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN1_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_02","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN1_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_02","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_AD_B0_02","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN1_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_02","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_AD_B0_02","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D1","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"PWM (FlexPWM1 Module0)","category":"pwm"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"TX1","category":"uart"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"MISO1","category":"spi"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"CTX2","category":"can"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"CAN2","category":"can"},{"src":{"page":105,"quote":"| GPIO_AD_B0_02 | M11 | NVCC_GPIO | Digital GPIO | ALT5 | GPIO1.IO[2] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"105_1"},"via":"chip u1 GPIO_AD_B0_02","note":"default (reset) mux function","signal":"GPIO1.IO[2]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_AD_B0_02","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B0_02","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B0_02","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B0_02","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B0_02","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B0_02","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_AD_B0_02","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_AD_B0_02","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B0_02","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B0_02","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P2","attrs":{"edge":"bottom","kind":"gpio","label":"2","number":2,"chip_pin":"GPIO_EMC_04","position":"B4","connector":"header_bottom","designator":"P2","power_domain":"NVCC_EMC","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN2_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_04","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN2_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_04","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN2_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_04","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN2_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_04","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN2_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_04","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN2_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_04","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN2_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_04","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN2_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_04","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN2_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_04","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_EMC_04","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN2_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_04","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_EMC_04","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D2","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"PWM (FlexPWM4 Module2)","category":"pwm"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"OUT2","category":"i2s"},{"src":{"page":108,"quote":"| GPIO_EMC_04 | F2 | NVCC_EMC | Digital GPIO | ALT5 | GPIO4.IO[4] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"108_1"},"via":"chip u1 GPIO_EMC_04","note":"default (reset) mux function","signal":"GPIO4.IO[4]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_EMC_04","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_04","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_04","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_04","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_04","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_EMC_04","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_EMC_04","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_EMC_04","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_04","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_EMC_04","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P3","attrs":{"edge":"bottom","kind":"gpio","label":"3","number":3,"chip_pin":"GPIO_EMC_05","position":"B5","connector":"header_bottom","designator":"P3","power_domain":"NVCC_EMC","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN3_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_05","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN3_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_05","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN3_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_05","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN3_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_05","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN3_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_05","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN3_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_05","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN3_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_05","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN3_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_05","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN3_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_05","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_EMC_05","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN3_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_05","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_EMC_05","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D3","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"PWM (FlexPWM4 Module2)","category":"pwm"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"LRCLK2","category":"i2s"},{"src":{"page":108,"quote":"| GPIO_EMC_05 | G5 | NVCC_EMC | Digital GPIO | ALT5 | GPIO4.IO[5] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"108_1"},"via":"chip u1 GPIO_EMC_05","note":"default (reset) mux function","signal":"GPIO4.IO[5]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_EMC_05","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_05","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_05","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_05","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_05","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_EMC_05","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_EMC_05","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_EMC_05","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_05","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_EMC_05","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P4","attrs":{"edge":"bottom","kind":"gpio","label":"4","number":4,"chip_pin":"GPIO_EMC_06","position":"B6","connector":"header_bottom","designator":"P4","power_domain":"NVCC_EMC","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN4_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_06","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN4_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_06","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN4_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_06","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN4_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_06","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN4_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_06","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN4_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_06","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN4_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_06","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN4_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_06","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN4_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_06","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_EMC_06","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN4_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_06","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_EMC_06","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D4","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"PWM (FlexPWM2 Module0)","category":"pwm"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"BCLK2","category":"i2s"},{"src":{"page":108,"quote":"| GPIO_EMC_06 | H5 | NVCC_EMC | Digital GPIO | ALT5 | GPIO4.IO[6] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"108_1"},"via":"chip u1 GPIO_EMC_06","note":"default (reset) mux function","signal":"GPIO4.IO[6]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_EMC_06","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_06","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_06","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_06","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_06","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_EMC_06","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_EMC_06","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_EMC_06","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_06","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_EMC_06","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P5","attrs":{"edge":"bottom","kind":"gpio","label":"5","number":5,"chip_pin":"GPIO_EMC_08","position":"B7","connector":"header_bottom","designator":"P5","power_domain":"NVCC_EMC","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN5_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_08","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN5_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_08","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN5_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_08","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN5_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_08","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN5_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_08","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN5_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_08","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN5_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_08","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN5_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_08","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN5_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_08","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_EMC_08","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN5_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_08","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_EMC_08","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D5","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"PWM (FlexPWM2 Module1)","category":"pwm"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"IN2","category":"i2s"},{"src":{"page":108,"quote":"| GPIO_EMC_08 | H3 | NVCC_EMC | Digital GPIO | ALT5 | GPIO4.IO[8] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"108_1"},"via":"chip u1 GPIO_EMC_08","note":"default (reset) mux function","signal":"GPIO4.IO[8]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_EMC_08","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_08","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_08","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_08","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_08","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_EMC_08","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_EMC_08","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_EMC_08","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_08","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_EMC_08","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P6","attrs":{"edge":"bottom","kind":"gpio","label":"6","number":6,"chip_pin":"GPIO_B0_10","position":"B8","connector":"header_bottom","designator":"P6","power_domain":"NVCC_GPIO","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN6_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_10","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN6_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_10","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN6_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_10","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN6_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_10","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN6_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_10","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN6_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_10","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN6_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_10","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN6_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_10","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN6_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_10","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_B0_10","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN6_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_10","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_B0_10","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D6","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"PWM (FlexPWM2 Module2)","category":"pwm"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"OUT1D","category":"i2s"},{"src":{"page":107,"quote":"| GPIO_B0_10 | D9 | NVCC_GPIO | Digital GPIO | ALT5 | GPIO2.IO[10] | Input | Keeper | Input | 100 K PD |","method":"table","fragment":"functions_default.json","table_id":"107_1"},"via":"chip u1 GPIO_B0_10","note":"default (reset) mux function","signal":"GPIO2.IO[10]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_B0_10","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_10","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_10","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_10","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_10","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_B0_10","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_B0_10","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_B0_10","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_10","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_B0_10","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P7","attrs":{"edge":"bottom","kind":"gpio","label":"7","number":7,"chip_pin":"GPIO_B1_01","position":"B9","connector":"header_bottom","designator":"P7","power_domain":"NVCC_GPIO","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN7_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_01","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN7_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_01","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN7_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_01","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN7_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_01","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN7_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_01","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN7_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_01","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN7_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_01","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN7_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_01","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN7_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_01","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_B1_01","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN7_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_01","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_B1_01","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D7","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"PWM (FlexPWM1 Module3)","category":"pwm"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"RX2","category":"uart"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"OUT1A","category":"i2s"},{"src":{"page":107,"quote":"| GPIO_B1_01 | B11 | NVCC_GPIO | Digital GPIO | ALT5 | GPIO2.IO[17] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"107_1"},"via":"chip u1 GPIO_B1_01","note":"default (reset) mux function","signal":"GPIO2.IO[17]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_B1_01","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B1_01","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B1_01","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B1_01","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B1_01","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_B1_01","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_B1_01","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_B1_01","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B1_01","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_B1_01","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P8","attrs":{"edge":"bottom","kind":"gpio","label":"8","number":8,"chip_pin":"GPIO_B1_00","position":"B10","connector":"header_bottom","designator":"P8","power_domain":"NVCC_GPIO","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN8_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_00","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN8_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_00","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN8_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_00","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN8_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_00","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN8_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_00","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN8_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_00","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN8_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_00","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN8_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_00","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN8_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_00","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_B1_00","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN8_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B1_00","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_B1_00","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D8","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"PWM (FlexPWM1 Module3)","category":"pwm"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"TX2","category":"uart"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"IN1","category":"i2s"},{"src":{"page":107,"quote":"| GPIO_B1_00 | A11 | NVCC_GPIO | Digital GPIO | ALT5 | GPIO2.IO[16] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"107_1"},"via":"chip u1 GPIO_B1_00","note":"default (reset) mux function","signal":"GPIO2.IO[16]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_B1_00","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B1_00","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B1_00","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B1_00","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B1_00","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_B1_00","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_B1_00","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_B1_00","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B1_00","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_B1_00","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P9","attrs":{"edge":"bottom","kind":"gpio","label":"9","number":9,"chip_pin":"GPIO_B0_11","position":"B11","connector":"header_bottom","designator":"P9","power_domain":"NVCC_GPIO","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN9_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_11","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN9_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_11","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN9_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_11","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN9_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_11","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN9_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_11","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN9_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_11","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN9_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_11","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN9_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_11","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN9_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_11","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_B0_11","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN9_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_11","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_B0_11","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D9","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"PWM (FlexPWM2 Module2)","category":"pwm"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"OUT1C","category":"i2s"},{"src":{"page":107,"quote":"| GPIO_B0_11 | A10 | NVCC_GPIO | Digital GPIO | ALT5 | GPIO2.IO[11] | Input | Keeper | Input | 100 K PD |","method":"table","fragment":"functions_default.json","table_id":"107_1"},"via":"chip u1 GPIO_B0_11","note":"default (reset) mux function","signal":"GPIO2.IO[11]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_B0_11","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_11","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_11","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_11","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_11","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_B0_11","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_B0_11","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_B0_11","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_11","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_B0_11","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P10","attrs":{"edge":"bottom","kind":"gpio","label":"10","number":10,"chip_pin":"GPIO_B0_00","position":"B12","connector":"header_bottom","designator":"P10","power_domain":"NVCC_GPIO","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN10_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_00","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN10_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_00","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN10_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_00","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN10_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_00","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN10_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_00","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN10_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_00","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN10_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_00","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN10_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_00","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN10_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_00","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_B0_00","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN10_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_00","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_B0_00","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D10","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"PWM (QuadTimer1 Module0)","category":"pwm"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"CS","category":"spi"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"MQSR","category":"audio"},{"src":{"page":106,"quote":"| GPIO_B0_00 | D7 | NVCC_GPIO | Digital GPIO | ALT5 | GPIO2.IO[0] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"106_1"},"via":"chip u1 GPIO_B0_00","note":"default (reset) mux function","signal":"GPIO2.IO[0]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_B0_00","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_00","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_00","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_00","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_00","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_B0_00","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_B0_00","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_B0_00","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_00","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_B0_00","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P11","attrs":{"edge":"bottom","kind":"gpio","label":"11","number":11,"chip_pin":"GPIO_B0_02","position":"B13","connector":"header_bottom","designator":"P11","power_domain":"NVCC_GPIO","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN11_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_02","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN11_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_02","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN11_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_02","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN11_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_02","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN11_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_02","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN11_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_02","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN11_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_02","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN11_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_02","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN11_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_02","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_B0_02","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN11_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_02","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_B0_02","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D11","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"PWM (QuadTimer1 Module2)","category":"pwm"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"MOSI","category":"spi"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"CTX1","category":"can"},{"src":{"page":106,"quote":"| GPIO_B0_02 | E8 | NVCC_GPIO | Digital GPIO | ALT5 | GPIO2.IO[2] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"106_1"},"via":"chip u1 GPIO_B0_02","note":"default (reset) mux function","signal":"GPIO2.IO[2]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_B0_02","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_02","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_02","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_02","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_02","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_B0_02","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_B0_02","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_B0_02","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_02","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_B0_02","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P12","attrs":{"edge":"bottom","kind":"gpio","label":"12","number":12,"chip_pin":"GPIO_B0_01","position":"B14","connector":"header_bottom","designator":"P12","power_domain":"NVCC_GPIO","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN12_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_01","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN12_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_01","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN12_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_01","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN12_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_01","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN12_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_01","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN12_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_01","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN12_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_01","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN12_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_01","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN12_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_01","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_B0_01","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN12_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_01","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_B0_01","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D12","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"PWM (QuadTimer1 Module1)","category":"pwm"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"MISO","category":"spi"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"MQSL","category":"audio"},{"src":{"page":106,"quote":"| GPIO_B0_01 | E7 | NVCC_GPIO | Digital GPIO | ALT5 | GPIO2.IO[1] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"106_1"},"via":"chip u1 GPIO_B0_01","note":"default (reset) mux function","signal":"GPIO2.IO[1]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_B0_01","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_01","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_01","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_01","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_01","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_B0_01","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_B0_01","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_B0_01","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_01","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_B0_01","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"3V3_B","attrs":{"edge":"bottom","kind":"power_out","label":"3.3V","position":"B15","connector":"header_bottom","designator":"3V3_B"},"sources":[{"page":21,"quote":"| GND PWM CRX2 CS1 RX1 PWM CTX2 MISO1 TX1 PWM OUT2 PWM LRCLK2 PWM BCLK2 PWM IN2 PWM OUT1D PWM OUT1A RX2 PWM IN1 TX2 Interrupt capability. All digital pins have 0 1 2 3 4 5 6 7 8 9 PWM OUT1C 10 PWM MQSR CS 11 PWM CTX1 MOSI 12 PWM MQSL MISO 3.3V 24 PWM SCL2 TX6 A10 25 PWM SDA2 RX6 A11 26 MOSI1 A12 27","method":"derived","fragment":"entities_pins.json"}],"attr_src":{"edge":{"page":21,"quote":"| GND PWM CRX2 CS1 RX1 PWM CTX2 MISO1 TX1 PWM OUT2 PWM LRCLK2 PWM BCLK2 PWM IN2 PWM OUT1D PWM OUT1A RX2 PWM IN1 TX2 Interrupt capability. All digital pins have 0 1 2 3 4 5 6 7 8 9 PWM OUT1C 10 PWM MQSR CS 11 PWM CTX1 MOSI 12 PWM MQSL MISO 3.3V 24 PWM SCL2 TX6 A10 25 PWM SDA2 RX6 A11 26 MOSI1 A12 27","method":"derived","fragment":"entities_pins.json"},"kind":{"page":21,"quote":"| GND PWM CRX2 CS1 RX1 PWM CTX2 MISO1 TX1 PWM OUT2 PWM LRCLK2 PWM BCLK2 PWM IN2 PWM OUT1D PWM OUT1A RX2 PWM IN1 TX2 Interrupt capability. All digital pins have 0 1 2 3 4 5 6 7 8 9 PWM OUT1C 10 PWM MQSR CS 11 PWM CTX1 MOSI 12 PWM MQSL MISO 3.3V 24 PWM SCL2 TX6 A10 25 PWM SDA2 RX6 A11 26 MOSI1 A12 27","method":"derived","fragment":"entities_pins.json"},"label":{"page":21,"quote":"| GND PWM CRX2 CS1 RX1 PWM CTX2 MISO1 TX1 PWM OUT2 PWM LRCLK2 PWM BCLK2 PWM IN2 PWM OUT1D PWM OUT1A RX2 PWM IN1 TX2 Interrupt capability. All digital pins have 0 1 2 3 4 5 6 7 8 9 PWM OUT1C 10 PWM MQSR CS 11 PWM CTX1 MOSI 12 PWM MQSL MISO 3.3V 24 PWM SCL2 TX6 A10 25 PWM SDA2 RX6 A11 26 MOSI1 A12 27","method":"derived","fragment":"entities_pins.json"},"position":{"page":21,"quote":"| GND PWM CRX2 CS1 RX1 PWM CTX2 MISO1 TX1 PWM OUT2 PWM LRCLK2 PWM BCLK2 PWM IN2 PWM OUT1D PWM OUT1A RX2 PWM IN1 TX2 Interrupt capability. All digital pins have 0 1 2 3 4 5 6 7 8 9 PWM OUT1C 10 PWM MQSR CS 11 PWM CTX1 MOSI 12 PWM MQSL MISO 3.3V 24 PWM SCL2 TX6 A10 25 PWM SDA2 RX6 A11 26 MOSI1 A12 27","method":"derived","fragment":"entities_pins.json"},"connector":{"page":21,"quote":"| GND PWM CRX2 CS1 RX1 PWM CTX2 MISO1 TX1 PWM OUT2 PWM LRCLK2 PWM BCLK2 PWM IN2 PWM OUT1D PWM OUT1A RX2 PWM IN1 TX2 Interrupt capability. All digital pins have 0 1 2 3 4 5 6 7 8 9 PWM OUT1C 10 PWM MQSR CS 11 PWM CTX1 MOSI 12 PWM MQSL MISO 3.3V 24 PWM SCL2 TX6 A10 25 PWM SDA2 RX6 A11 26 MOSI1 A12 27","method":"derived","fragment":"entities_pins.json"},"designator":{"page":21,"quote":"| GND PWM CRX2 CS1 RX1 PWM CTX2 MISO1 TX1 PWM OUT2 PWM LRCLK2 PWM BCLK2 PWM IN2 PWM OUT1D PWM OUT1A RX2 PWM IN1 TX2 Interrupt capability. All digital pins have 0 1 2 3 4 5 6 7 8 9 PWM OUT1C 10 PWM MQSR CS 11 PWM CTX1 MOSI 12 PWM MQSL MISO 3.3V 24 PWM SCL2 TX6 A10 25 PWM SDA2 RX6 A11 26 MOSI1 A12 27","method":"derived","fragment":"entities_pins.json"}},"functions":[],"electrical":{"output_current":[{"max":0.25,"src":{"page":14,"quote":"The recommended maximum for external 3.3V usage is 250mA.","method":"text","fragment":"ratings_board.json"},"via":"direct","orig":{"max":250,"unit":"mA"},"unit":"A","category":"operating","parameter":"3.3V external load (recommended max)"}],"output_voltage":[{"src":{"page":14,"quote":"Teensy 4.1 has a voltage regulator which reduces the 5V VUSB / VIN power to 3.3V for use by the main processor and most other parts.","method":"text","fragment":"ratings_board.json"},"typ":3.3,"via":"direct","unit":"V","category":"operating","parameter":"3.3V rail"}]},"entity_type":"pin"},{"id":"P24","attrs":{"edge":"bottom","kind":"analog","label":"24","number":24,"chip_pin":"GPIO_AD_B0_12","position":"B16","alt_label":"A10","connector":"header_bottom","designator":"P24","power_domain":"NVCC_GPIO","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN24_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_12","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN24_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_12","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN24_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_12","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN24_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_12","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN24_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_12","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN24_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_12","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN24_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_12","method":"text","fragment":"entities_pins.json"},"alt_label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN24_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_12","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN24_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_12","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN24_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_12","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_AD_B0_12","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN24_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_12","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_AD_B0_12","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D24","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"A10 (12-bit ADC, 0–3.3 V)","category":"adc"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"PWM (FlexPWM1 Module2)","category":"pwm"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"TX6","category":"uart"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"SCL2","category":"i2c"},{"src":{"page":105,"quote":"| GPIO_AD_B0_12 | K14 | NVCC_GPIO | Digital GPIO | ALT5 | GPIO1.IO[12] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"105_1"},"via":"chip u1 GPIO_AD_B0_12","note":"default (reset) mux function","signal":"GPIO1.IO[12]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_AD_B0_12","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B0_12","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B0_12","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B0_12","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B0_12","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B0_12","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_AD_B0_12","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_AD_B0_12","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B0_12","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B0_12","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"adc_input_range":[{"max":3.3,"min":0,"src":{"page":8,"quote":"The analog input range is fixed at 0 to 3.3V. On Teensy 4.1, the analogReference() function has no effect. The analog pins are not 5V tolerant. Do not drive any analog pin higher than 3.3 volts.","method":"text","fragment":"ratings_board.json"},"via":"group:analog","unit":"V","category":"operating","parameter":"Analog input range","conditions":"fixed; analogReference() has no effect"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P25","attrs":{"edge":"bottom","kind":"analog","label":"25","number":25,"chip_pin":"GPIO_AD_B0_13","position":"B17","alt_label":"A11","connector":"header_bottom","designator":"P25","power_domain":"NVCC_GPIO","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN25_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_13","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN25_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_13","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN25_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_13","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN25_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_13","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN25_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_13","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN25_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_13","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN25_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_13","method":"text","fragment":"entities_pins.json"},"alt_label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN25_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_13","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN25_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_13","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN25_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_13","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_AD_B0_13","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN25_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_13","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_AD_B0_13","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D25","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"A11 (12-bit ADC, 0–3.3 V)","category":"adc"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"PWM (FlexPWM1 Module3)","category":"pwm"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"RX6","category":"uart"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"SDA2","category":"i2c"},{"src":{"page":105,"quote":"| GPIO_AD_B0_13 | L14 | NVCC_GPIO | Digital GPIO | ALT5 | GPIO1.IO[13] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"105_1"},"via":"chip u1 GPIO_AD_B0_13","note":"default (reset) mux function","signal":"GPIO1.IO[13]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_AD_B0_13","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B0_13","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B0_13","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B0_13","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B0_13","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B0_13","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_AD_B0_13","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_AD_B0_13","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B0_13","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B0_13","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"adc_input_range":[{"max":3.3,"min":0,"src":{"page":8,"quote":"The analog input range is fixed at 0 to 3.3V. On Teensy 4.1, the analogReference() function has no effect. The analog pins are not 5V tolerant. Do not drive any analog pin higher than 3.3 volts.","method":"text","fragment":"ratings_board.json"},"via":"group:analog","unit":"V","category":"operating","parameter":"Analog input range","conditions":"fixed; analogReference() has no effect"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P26","attrs":{"edge":"bottom","kind":"analog","label":"26","number":26,"chip_pin":"GPIO_AD_B1_14","position":"B18","alt_label":"A12","connector":"header_bottom","designator":"P26","power_domain":"NVCC_GPIO","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN26_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_14","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN26_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_14","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN26_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_14","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN26_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_14","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN26_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_14","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN26_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_14","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN26_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_14","method":"text","fragment":"entities_pins.json"},"alt_label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN26_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_14","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN26_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_14","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN26_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_14","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_AD_B1_14","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN26_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_14","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_AD_B1_14","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D26","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"A12 (12-bit ADC, 0–3.3 V)","category":"adc"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"MOSI1","category":"spi"},{"src":{"page":106,"quote":"| GPIO_AD_B1_14 | G12 | NVCC_GPIO | Digital GPIO | ALT5 | GPIO1.IO[30] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"106_1"},"via":"chip u1 GPIO_AD_B1_14","note":"default (reset) mux function","signal":"GPIO1.IO[30]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_AD_B1_14","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_14","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_14","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_14","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_14","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B1_14","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_AD_B1_14","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_AD_B1_14","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_14","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B1_14","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"adc_input_range":[{"max":3.3,"min":0,"src":{"page":8,"quote":"The analog input range is fixed at 0 to 3.3V. On Teensy 4.1, the analogReference() function has no effect. The analog pins are not 5V tolerant. Do not drive any analog pin higher than 3.3 volts.","method":"text","fragment":"ratings_board.json"},"via":"group:analog","unit":"V","category":"operating","parameter":"Analog input range","conditions":"fixed; analogReference() has no effect"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P27","attrs":{"edge":"bottom","kind":"analog","label":"27","number":27,"chip_pin":"GPIO_AD_B1_15","position":"B19","alt_label":"A13","connector":"header_bottom","designator":"P27","power_domain":"NVCC_GPIO","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN27_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_15","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN27_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_15","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN27_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_15","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN27_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_15","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN27_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_15","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN27_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_15","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN27_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_15","method":"text","fragment":"entities_pins.json"},"alt_label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN27_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_15","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN27_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_15","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN27_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_15","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_AD_B1_15","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN27_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_15","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_AD_B1_15","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D27","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"A13 (12-bit ADC, 0–3.3 V)","category":"adc"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"SCK1","category":"spi"},{"src":{"page":106,"quote":"| GPIO_AD_B1_15 | J14 | NVCC_GPIO | Digital GPIO | ALT5 | GPIO1.IO[31] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"106_1"},"via":"chip u1 GPIO_AD_B1_15","note":"default (reset) mux function","signal":"GPIO1.IO[31]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_AD_B1_15","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_15","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_15","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_15","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_15","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B1_15","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_AD_B1_15","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_AD_B1_15","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_AD_B1_15","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_AD_B1_15","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"adc_input_range":[{"max":3.3,"min":0,"src":{"page":8,"quote":"The analog input range is fixed at 0 to 3.3V. On Teensy 4.1, the analogReference() function has no effect. The analog pins are not 5V tolerant. Do not drive any analog pin higher than 3.3 volts.","method":"text","fragment":"ratings_board.json"},"via":"group:analog","unit":"V","category":"operating","parameter":"Analog input range","conditions":"fixed; analogReference() has no effect"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P28","attrs":{"edge":"bottom","kind":"gpio","label":"28","number":28,"chip_pin":"GPIO_EMC_32","position":"B20","connector":"header_bottom","designator":"P28","power_domain":"NVCC_EMC","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN28_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_32","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN28_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_32","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN28_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_32","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN28_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_32","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN28_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_32","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN28_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_32","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN28_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_32","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN28_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_32","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN28_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_32","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_EMC_32","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN28_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_32","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_EMC_32","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D28","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"PWM (FlexPWM3 Module1)","category":"pwm"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"RX7","category":"uart"},{"src":{"page":109,"quote":"| GPIO_EMC_32 | D5 | NVCC_EMC | Digital GPIO | ALT5 | GPIO3.IO[18] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"109_1"},"via":"chip u1 GPIO_EMC_32","note":"default (reset) mux function","signal":"GPIO3.IO[18]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_EMC_32","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_32","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_32","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_32","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_32","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_EMC_32","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_EMC_32","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_EMC_32","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_32","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_EMC_32","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P29","attrs":{"edge":"bottom","kind":"gpio","label":"29","number":29,"chip_pin":"GPIO_EMC_31","position":"B21","connector":"header_bottom","designator":"P29","power_domain":"NVCC_EMC","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN29_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_31","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN29_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_31","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN29_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_31","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN29_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_31","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN29_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_31","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN29_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_31","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN29_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_31","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN29_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_31","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN29_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_31","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_EMC_31","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN29_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_31","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_EMC_31","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D29","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"PWM (FlexPWM3 Module1)","category":"pwm"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"TX7","category":"uart"},{"src":{"page":109,"quote":"| GPIO_EMC_31 | C5 | NVCC_EMC | Digital GPIO | ALT5 | GPIO4.IO[31] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"109_1"},"via":"chip u1 GPIO_EMC_31","note":"default (reset) mux function","signal":"GPIO4.IO[31]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_EMC_31","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_31","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_31","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_31","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_31","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_EMC_31","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_EMC_31","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_EMC_31","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_31","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_EMC_31","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P30","attrs":{"edge":"bottom","kind":"gpio","label":"30","number":30,"chip_pin":"GPIO_EMC_37","position":"B22","connector":"header_bottom","designator":"P30","power_domain":"NVCC_EMC","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN30_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_37","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN30_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_37","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN30_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_37","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN30_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_37","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN30_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_37","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN30_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_37","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN30_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_37","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN30_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_37","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN30_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_37","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_EMC_37","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN30_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_37","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_EMC_37","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D30","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"CRX3","category":"can"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"CAN3 (CAN FD)","category":"can"},{"src":{"page":109,"quote":"| GPIO_EMC_37 | E4 | NVCC_EMC | Digital GPIO | ALT5 | GPIO3.IO[23] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"109_1"},"via":"chip u1 GPIO_EMC_37","note":"default (reset) mux function","signal":"GPIO3.IO[23]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_EMC_37","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_37","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_37","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_37","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_37","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_EMC_37","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_EMC_37","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_EMC_37","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_37","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_EMC_37","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P31","attrs":{"edge":"bottom","kind":"gpio","label":"31","number":31,"chip_pin":"GPIO_EMC_36","position":"B23","connector":"header_bottom","designator":"P31","power_domain":"NVCC_EMC","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN31_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_36","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN31_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_36","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN31_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_36","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN31_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_36","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN31_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_36","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN31_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_36","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN31_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_36","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN31_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_36","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN31_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_36","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_EMC_36","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN31_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_36","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_EMC_36","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D31","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"CTX3","category":"can"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"CAN3 (CAN FD)","category":"can"},{"src":{"page":109,"quote":"| GPIO_EMC_36 | C3 | NVCC_EMC | Digital GPIO | ALT5 | GPIO3.IO[22] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"109_1"},"via":"chip u1 GPIO_EMC_36","note":"default (reset) mux function","signal":"GPIO3.IO[22]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_EMC_36","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_36","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_36","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_36","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_36","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_EMC_36","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_EMC_36","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_EMC_36","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_36","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_EMC_36","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P32","attrs":{"edge":"bottom","kind":"gpio","label":"32","number":32,"chip_pin":"GPIO_B0_12","position":"B24","connector":"header_bottom","designator":"P32","power_domain":"NVCC_GPIO","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN32_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_12","method":"text","fragment":"entities_pins.json"}],"attr_src":{"edge":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN32_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_12","method":"text","fragment":"entities_pins.json"},"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN32_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_12","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN32_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_12","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN32_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_12","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN32_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_12","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN32_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_12","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN32_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_12","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN32_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_12","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_B0_12","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN32_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_B0_12","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_B0_12","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"D32","category":"gpio"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":21,"quote":"| | | | Vin (3.6 to 5.5 volts) GND 3.3V (250 mA max) 23 A9 CRX1 MCLK1 PWM 22 A8 CTX1 PWM 21 A7 RX5 BCLK1 20 A6 TX5 LRCLK1 SCL 19 A5 PWM SDA 18 A4 PWM | SDA1 17 A3 TX4 SCL1 16 A2 RX4 15 A1 RX3 PWM S/PDIF IN 14 A0 TX3 PWM S/PDIF OUT (LED) 13 SCK PWM GND 41 A17 40 A16 39 A15 MISO1 OUT1A 38 A14 CS1 I","method":"derived","fragment":"functions_pins.json"},"signal":"OUT1B","category":"i2s"},{"src":{"page":107,"quote":"| GPIO_B0_12 | C10 | NVCC_GPIO | Digital GPIO | ALT5 | GPIO2.IO[12] | Input | Keeper | Input | 100 K PD |","method":"table","fragment":"functions_default.json","table_id":"107_1"},"via":"chip u1 GPIO_B0_12","note":"default (reset) mux function","signal":"GPIO2.IO[12]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_B0_12","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_12","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_12","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_12","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_12","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_B0_12","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_B0_12","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_B0_12","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_B0_12","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_B0_12","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P42","attrs":{"kind":"gpio","note":"micro-SD socket signal (SDIO), not a header pin","label":"42","number":42,"chip_pin":"GPIO_SD_B0_03","position":"SD1","connector":"microsd_socket","designator":"P42","power_domain":"NVCC_SD0","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN42_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_03","method":"text","fragment":"entities_pins.json"}],"attr_src":{"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN42_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_03","method":"text","fragment":"entities_pins.json"},"note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN42_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_03","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN42_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_03","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN42_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_03","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN42_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_03","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN42_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_03","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN42_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_03","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN42_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_03","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_SD_B0_03","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN42_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_03","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_SD_B0_03","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"^{forDate&Time}_{&powermanagement} SDCard 42 DAT1 MISO2 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"D42","category":"gpio"},{"src":{"page":22,"quote":"^{forDate&Time}_{&powermanagement} SDCard 42 DAT1 MISO2 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":22,"quote":"^{forDate&Time}_{&powermanagement} SDCard 42 DAT1 MISO2 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"PWM (FlexPWM1 Module1)","category":"pwm"},{"src":{"page":22,"quote":"^{forDate&Time}_{&powermanagement} SDCard 42 DAT1 MISO2 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"DAT1","category":"sdio"},{"src":{"page":22,"quote":"^{forDate&Time}_{&powermanagement} SDCard 42 DAT1 MISO2 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"MISO2","category":"spi"},{"src":{"page":110,"quote":"| GPIO_SD_B0_03 | K1 | NVCC_SD0 | Digital GPIO | ALT5 | GPIO3.IO[15] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"110_1"},"via":"chip u1 GPIO_SD_B0_03","note":"default (reset) mux function","signal":"GPIO3.IO[15]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_SD_B0_03","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_SD_B0_03","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_SD_B0_03","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_SD_B0_03","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_SD_B0_03","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_SD_B0_03","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_SD_B0_03","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_SD_B0_03","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_SD_B0_03","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_SD_B0_03","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P43","attrs":{"kind":"gpio","note":"micro-SD socket signal (SDIO), not a header pin","label":"43","number":43,"chip_pin":"GPIO_SD_B0_02","position":"SD2","connector":"microsd_socket","designator":"P43","power_domain":"NVCC_SD0","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN43_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_02","method":"text","fragment":"entities_pins.json"}],"attr_src":{"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN43_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_02","method":"text","fragment":"entities_pins.json"},"note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN43_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_02","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN43_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_02","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN43_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_02","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN43_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_02","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN43_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_02","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN43_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_02","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN43_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_02","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_SD_B0_02","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN43_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_02","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_SD_B0_02","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"_{Use3Vcoincell} 43 DAT0 MOSI2 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"D43","category":"gpio"},{"src":{"page":22,"quote":"_{Use3Vcoincell} 43 DAT0 MOSI2 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":22,"quote":"_{Use3Vcoincell} 43 DAT0 MOSI2 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"PWM (FlexPWM1 Module1)","category":"pwm"},{"src":{"page":22,"quote":"_{Use3Vcoincell} 43 DAT0 MOSI2 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"DAT0","category":"sdio"},{"src":{"page":22,"quote":"_{Use3Vcoincell} 43 DAT0 MOSI2 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"MOSI2","category":"spi"},{"src":{"page":110,"quote":"| GPIO_SD_B0_02 | J1 | NVCC_SD0 | Digital GPIO | ALT5 | GPIO3.IO[14] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"110_1"},"via":"chip u1 GPIO_SD_B0_02","note":"default (reset) mux function","signal":"GPIO3.IO[14]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_SD_B0_02","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_SD_B0_02","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_SD_B0_02","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_SD_B0_02","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_SD_B0_02","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_SD_B0_02","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_SD_B0_02","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_SD_B0_02","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_SD_B0_02","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_SD_B0_02","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P44","attrs":{"kind":"gpio","note":"micro-SD socket signal (SDIO), not a header pin","label":"44","number":44,"chip_pin":"GPIO_SD_B0_01","position":"SD3","connector":"microsd_socket","designator":"P44","power_domain":"NVCC_SD0","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN44_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_01","method":"text","fragment":"entities_pins.json"}],"attr_src":{"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN44_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_01","method":"text","fragment":"entities_pins.json"},"note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN44_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_01","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN44_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_01","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN44_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_01","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN44_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_01","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN44_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_01","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN44_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_01","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN44_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_01","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_SD_B0_01","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN44_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_01","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_SD_B0_01","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"3.3V 44 CLK CS2 SDA1 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"D44","category":"gpio"},{"src":{"page":22,"quote":"3.3V 44 CLK CS2 SDA1 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":22,"quote":"3.3V 44 CLK CS2 SDA1 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"PWM (FlexPWM1 Module0)","category":"pwm"},{"src":{"page":22,"quote":"3.3V 44 CLK CS2 SDA1 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"CLK","category":"sdio"},{"src":{"page":22,"quote":"3.3V 44 CLK CS2 SDA1 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"CS2","category":"spi"},{"src":{"page":22,"quote":"3.3V 44 CLK CS2 SDA1 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"SDA1","category":"i2c"},{"src":{"page":110,"quote":"| GPIO_SD_B0_01 | J3 | NVCC_SD0 | Digital GPIO | ALT5 | GPIO3.IO[13] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"110_1"},"via":"chip u1 GPIO_SD_B0_01","note":"default (reset) mux function","signal":"GPIO3.IO[13]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_SD_B0_01","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_SD_B0_01","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_SD_B0_01","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_SD_B0_01","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_SD_B0_01","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_SD_B0_01","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_SD_B0_01","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_SD_B0_01","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_SD_B0_01","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_SD_B0_01","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P45","attrs":{"kind":"gpio","note":"micro-SD socket signal (SDIO), not a header pin","label":"45","number":45,"chip_pin":"GPIO_SD_B0_00","position":"SD4","connector":"microsd_socket","designator":"P45","power_domain":"NVCC_SD0","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN45_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_00","method":"text","fragment":"entities_pins.json"}],"attr_src":{"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN45_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_00","method":"text","fragment":"entities_pins.json"},"note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN45_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_00","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN45_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_00","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN45_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_00","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN45_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_00","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN45_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_00","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN45_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_00","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN45_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_00","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_SD_B0_00","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN45_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_00","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_SD_B0_00","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"Program 45 CMD SCK2 SCL1 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"D45","category":"gpio"},{"src":{"page":22,"quote":"Program 45 CMD SCK2 SCL1 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":22,"quote":"Program 45 CMD SCK2 SCL1 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"PWM (FlexPWM1 Module0)","category":"pwm"},{"src":{"page":22,"quote":"Program 45 CMD SCK2 SCL1 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"CMD","category":"sdio"},{"src":{"page":22,"quote":"Program 45 CMD SCK2 SCL1 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"SCK2","category":"spi"},{"src":{"page":22,"quote":"Program 45 CMD SCK2 SCL1 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"SCL1","category":"i2c"},{"src":{"page":110,"quote":"| GPIO_SD_B0_00 | J4 | NVCC_SD0 | Digital GPIO | ALT5 | GPIO3.IO[12] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"110_1"},"via":"chip u1 GPIO_SD_B0_00","note":"default (reset) mux function","signal":"GPIO3.IO[12]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_SD_B0_00","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_SD_B0_00","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_SD_B0_00","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_SD_B0_00","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_SD_B0_00","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_SD_B0_00","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_SD_B0_00","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_SD_B0_00","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_SD_B0_00","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_SD_B0_00","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P46","attrs":{"kind":"gpio","note":"micro-SD socket signal (SDIO), not a header pin","label":"46","number":46,"chip_pin":"GPIO_SD_B0_05","position":"SD5","connector":"microsd_socket","designator":"P46","power_domain":"NVCC_SD0","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN46_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_05","method":"text","fragment":"entities_pins.json"}],"attr_src":{"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN46_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_05","method":"text","fragment":"entities_pins.json"},"note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN46_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_05","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN46_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_05","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN46_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_05","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN46_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_05","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN46_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_05","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN46_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_05","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN46_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_05","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_SD_B0_05","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN46_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_05","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_SD_B0_05","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"On/Off 46 DAT3 RX5 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"D46","category":"gpio"},{"src":{"page":22,"quote":"On/Off 46 DAT3 RX5 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":22,"quote":"On/Off 46 DAT3 RX5 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"PWM (FlexPWM1 Module2)","category":"pwm"},{"src":{"page":22,"quote":"On/Off 46 DAT3 RX5 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"DAT3","category":"sdio"},{"src":{"page":22,"quote":"On/Off 46 DAT3 RX5 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"RX5","category":"uart"},{"src":{"page":110,"quote":"| GPIO_SD_B0_05 | J2 | NVCC_SD0 | Digital GPIO | ALT5 | GPIO3.IO[17] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"110_1"},"via":"chip u1 GPIO_SD_B0_05","note":"default (reset) mux function","signal":"GPIO3.IO[17]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_SD_B0_05","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_SD_B0_05","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_SD_B0_05","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_SD_B0_05","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_SD_B0_05","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_SD_B0_05","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_SD_B0_05","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_SD_B0_05","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_SD_B0_05","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_SD_B0_05","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P47","attrs":{"kind":"gpio","note":"micro-SD socket signal (SDIO), not a header pin","label":"47","number":47,"chip_pin":"GPIO_SD_B0_04","position":"SD6","connector":"microsd_socket","designator":"P47","power_domain":"NVCC_SD0","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN47_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_04","method":"text","fragment":"entities_pins.json"}],"attr_src":{"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN47_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_04","method":"text","fragment":"entities_pins.json"},"note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN47_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_04","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN47_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_04","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN47_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_04","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN47_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_04","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN47_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_04","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN47_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_04","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN47_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_04","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_SD_B0_04","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN47_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_SD_B0_04","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_SD_B0_04","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"47 DAT2 TX5 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"D47","category":"gpio"},{"src":{"page":22,"quote":"47 DAT2 TX5 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":22,"quote":"47 DAT2 TX5 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"PWM (FlexPWM1 Module2)","category":"pwm"},{"src":{"page":22,"quote":"47 DAT2 TX5 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"DAT2","category":"sdio"},{"src":{"page":22,"quote":"47 DAT2 TX5 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"TX5","category":"uart"},{"src":{"page":110,"quote":"| GPIO_SD_B0_04 | H2 | NVCC_SD0 | Digital GPIO | ALT5 | GPIO3.IO[16] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"110_1"},"via":"chip u1 GPIO_SD_B0_04","note":"default (reset) mux function","signal":"GPIO3.IO[16]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_SD_B0_04","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_SD_B0_04","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_SD_B0_04","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_SD_B0_04","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_SD_B0_04","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_SD_B0_04","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_SD_B0_04","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_SD_B0_04","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_SD_B0_04","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_SD_B0_04","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P48","attrs":{"kind":"gpio","note":"bottom SMT pad in the QSPI memory area (shared with PSRAM/flash chip footprints)","label":"48","number":48,"chip_pin":"GPIO_EMC_24","position":"Q1","connector":"bottom_smt_pads","designator":"P48","power_domain":"NVCC_EMC","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN48_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_24","method":"text","fragment":"entities_pins.json"}],"attr_src":{"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN48_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_24","method":"text","fragment":"entities_pins.json"},"note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN48_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_24","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN48_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_24","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN48_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_24","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN48_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_24","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN48_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_24","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN48_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_24","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN48_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_24","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_EMC_24","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN48_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_24","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_EMC_24","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"RX8 CS0 48 3.3V","method":"derived","fragment":"functions_pins.json"},"signal":"D48","category":"gpio"},{"src":{"page":22,"quote":"RX8 CS0 48 3.3V","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":22,"quote":"RX8 CS0 48 3.3V","method":"derived","fragment":"functions_pins.json"},"signal":"CS0","category":"spi"},{"src":{"page":22,"quote":"RX8 CS0 48 3.3V","method":"derived","fragment":"functions_pins.json"},"signal":"RX8","category":"uart"},{"src":{"page":109,"quote":"| GPIO_EMC_24 | D3 | NVCC_EMC | Digital GPIO | ALT5 | GPIO4.IO[24] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"109_1"},"via":"chip u1 GPIO_EMC_24","note":"default (reset) mux function","signal":"GPIO4.IO[24]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_EMC_24","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_24","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_24","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_24","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_24","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_EMC_24","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_EMC_24","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_EMC_24","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_24","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_EMC_24","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P49","attrs":{"kind":"gpio","note":"bottom SMT pad in the QSPI memory area (shared with PSRAM/flash chip footprints)","label":"49","number":49,"chip_pin":"GPIO_EMC_27","position":"Q2","connector":"bottom_smt_pads","designator":"P49","power_domain":"NVCC_EMC","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN49_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_27","method":"text","fragment":"entities_pins.json"}],"attr_src":{"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN49_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_27","method":"text","fragment":"entities_pins.json"},"note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN49_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_27","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN49_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_27","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN49_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_27","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN49_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_27","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN49_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_27","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN49_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_27","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN49_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_27","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_EMC_27","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN49_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_27","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_EMC_27","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"SCK2 D1 49 * 54 * D3 MISO2 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"D49","category":"gpio"},{"src":{"page":22,"quote":"SCK2 D1 49 * 54 * D3 MISO2 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":22,"quote":"SCK2 D1 49 * 54 * D3 MISO2 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"D1","category":"qspi"},{"src":{"page":22,"quote":"SCK2 D1 49 * 54 * D3 MISO2 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"SCK2","category":"spi"},{"src":{"page":109,"quote":"| GPIO_EMC_27 | A2 | NVCC_EMC | Digital GPIO | ALT5 | GPIO4.IO[27] | Input | 100 K PD | Input | 100 K PD |","method":"table","fragment":"functions_default.json","table_id":"109_1"},"via":"chip u1 GPIO_EMC_27","note":"default (reset) mux function","signal":"GPIO4.IO[27]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_EMC_27","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_27","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_27","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_27","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_27","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_EMC_27","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_EMC_27","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_EMC_27","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_27","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_EMC_27","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P50","attrs":{"kind":"gpio","note":"bottom SMT pad in the QSPI memory area (shared with PSRAM/flash chip footprints)","label":"50","number":50,"chip_pin":"GPIO_EMC_28","position":"Q3","connector":"bottom_smt_pads","designator":"P50","power_domain":"NVCC_EMC","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN50_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_28","method":"text","fragment":"entities_pins.json"}],"attr_src":{"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN50_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_28","method":"text","fragment":"entities_pins.json"},"note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN50_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_28","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN50_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_28","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN50_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_28","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN50_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_28","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN50_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_28","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN50_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_28","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN50_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_28","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_EMC_28","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN50_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_28","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_EMC_28","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"MOSI2 D2 50 * 53 * CLK TX1","method":"derived","fragment":"functions_pins.json"},"signal":"D50","category":"gpio"},{"src":{"page":22,"quote":"MOSI2 D2 50 * 53 * CLK TX1","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":22,"quote":"MOSI2 D2 50 * 53 * CLK TX1","method":"derived","fragment":"functions_pins.json"},"signal":"D2","category":"qspi"},{"src":{"page":22,"quote":"MOSI2 D2 50 * 53 * CLK TX1","method":"derived","fragment":"functions_pins.json"},"signal":"MOSI2","category":"spi"},{"src":{"page":109,"quote":"| GPIO_EMC_28 | D1 | NVCC_EMC | Digital GPIO | ALT5 | GPIO4.IO[28] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"109_1"},"via":"chip u1 GPIO_EMC_28","note":"default (reset) mux function","signal":"GPIO4.IO[28]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_EMC_28","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_28","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_28","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_28","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_28","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_EMC_28","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_EMC_28","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_EMC_28","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_28","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_EMC_28","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P51","attrs":{"kind":"gpio","note":"bottom SMT pad in the QSPI memory area (shared with PSRAM/flash chip footprints)","label":"51","number":51,"chip_pin":"GPIO_EMC_22","position":"Q4","connector":"bottom_smt_pads","designator":"P51","power_domain":"NVCC_EMC","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN51_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_22","method":"text","fragment":"entities_pins.json"}],"attr_src":{"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN51_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_22","method":"text","fragment":"entities_pins.json"},"note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN51_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_22","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN51_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_22","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN51_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_22","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN51_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_22","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN51_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_22","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN51_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_22","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN51_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_22","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_EMC_22","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN51_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_22","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_EMC_22","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"PWM SCL1 CS1 51 3.3V^{*Pinisshowntwice}","method":"derived","fragment":"functions_pins.json"},"signal":"D51","category":"gpio"},{"src":{"page":22,"quote":"PWM SCL1 CS1 51 3.3V^{*Pinisshowntwice}","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":22,"quote":"PWM SCL1 CS1 51 3.3V^{*Pinisshowntwice}","method":"derived","fragment":"functions_pins.json"},"signal":"PWM","category":"pwm"},{"src":{"page":22,"quote":"PWM SCL1 CS1 51 3.3V^{*Pinisshowntwice}","method":"derived","fragment":"functions_pins.json"},"signal":"CS1","category":"spi"},{"src":{"page":22,"quote":"PWM SCL1 CS1 51 3.3V^{*Pinisshowntwice}","method":"derived","fragment":"functions_pins.json"},"signal":"SCL1","category":"i2c"},{"src":{"page":109,"quote":"| GPIO_EMC_22 | F1 | NVCC_EMC | Digital GPIO | ALT5 | GPIO4.IO[22] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"109_1"},"via":"chip u1 GPIO_EMC_22","note":"default (reset) mux function","signal":"GPIO4.IO[22]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_EMC_22","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_22","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_22","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_22","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_22","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_EMC_22","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_EMC_22","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_EMC_22","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_22","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_EMC_22","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P52","attrs":{"kind":"gpio","note":"bottom SMT pad in the QSPI memory area (shared with PSRAM/flash chip footprints)","label":"52","number":52,"chip_pin":"GPIO_EMC_26","position":"Q5","connector":"bottom_smt_pads","designator":"P52","power_domain":"NVCC_EMC","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN52_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_26","method":"text","fragment":"entities_pins.json"}],"attr_src":{"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN52_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_26","method":"text","fragment":"entities_pins.json"},"note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN52_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_26","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN52_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_26","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN52_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_26","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN52_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_26","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN52_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_26","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN52_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_26","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN52_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_26","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_EMC_26","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN52_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_26","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_EMC_26","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"GND 52 * D0 RX1","method":"derived","fragment":"functions_pins.json"},"signal":"D52","category":"gpio"},{"src":{"page":22,"quote":"GND 52 * D0 RX1","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":22,"quote":"GND 52 * D0 RX1","method":"derived","fragment":"functions_pins.json"},"signal":"D0","category":"qspi"},{"src":{"page":22,"quote":"GND 52 * D0 RX1","method":"derived","fragment":"functions_pins.json"},"signal":"RX1","category":"uart"},{"src":{"page":109,"quote":"| GPIO_EMC_26 | B3 | NVCC_EMC | Digital GPIO | ALT5 | GPIO4.IO[26] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"109_1"},"via":"chip u1 GPIO_EMC_26","note":"default (reset) mux function","signal":"GPIO4.IO[26]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_EMC_26","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_26","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_26","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_26","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_26","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_EMC_26","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_EMC_26","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_EMC_26","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_26","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_EMC_26","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P53","attrs":{"kind":"gpio","note":"bottom SMT pad in the QSPI memory area (shared with PSRAM/flash chip footprints)","label":"53","number":53,"chip_pin":"GPIO_EMC_25","position":"Q6","connector":"bottom_smt_pads","designator":"P53","power_domain":"NVCC_EMC","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN53_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_25","method":"text","fragment":"entities_pins.json"}],"attr_src":{"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN53_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_25","method":"text","fragment":"entities_pins.json"},"note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN53_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_25","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN53_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_25","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN53_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_25","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN53_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_25","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN53_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_25","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN53_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_25","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN53_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_25","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_EMC_25","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN53_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_25","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_EMC_25","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"MOSI2 D2 50 * 53 * CLK TX1","method":"derived","fragment":"functions_pins.json"},"signal":"D53","category":"gpio"},{"src":{"page":22,"quote":"MOSI2 D2 50 * 53 * CLK TX1","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":22,"quote":"MOSI2 D2 50 * 53 * CLK TX1","method":"derived","fragment":"functions_pins.json"},"signal":"CLK","category":"sdio"},{"src":{"page":22,"quote":"MOSI2 D2 50 * 53 * CLK TX1","method":"derived","fragment":"functions_pins.json"},"signal":"TX1","category":"uart"},{"src":{"page":109,"quote":"| GPIO_EMC_25 | D2 | NVCC_EMC | Digital GPIO | ALT5 | GPIO4.IO[25] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"109_1"},"via":"chip u1 GPIO_EMC_25","note":"default (reset) mux function","signal":"GPIO4.IO[25]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_EMC_25","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_25","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_25","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_25","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_25","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_EMC_25","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_EMC_25","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_EMC_25","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_25","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_EMC_25","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"P54","attrs":{"kind":"gpio","note":"bottom SMT pad in the QSPI memory area (shared with PSRAM/flash chip footprints)","label":"54","number":54,"chip_pin":"GPIO_EMC_29","position":"Q7","connector":"bottom_smt_pads","designator":"P54","power_domain":"NVCC_EMC","chip_pin_note":"i.MX RT1062 pad from CORE_PINn_CONFIG"},"sources":[{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN54_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_29","method":"text","fragment":"entities_pins.json"}],"attr_src":{"kind":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN54_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_29","method":"text","fragment":"entities_pins.json"},"note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN54_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_29","method":"text","fragment":"entities_pins.json"},"label":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN54_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_29","method":"text","fragment":"entities_pins.json"},"number":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN54_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_29","method":"text","fragment":"entities_pins.json"},"chip_pin":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN54_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_29","method":"text","fragment":"entities_pins.json"},"position":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN54_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_29","method":"text","fragment":"entities_pins.json"},"connector":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN54_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_29","method":"text","fragment":"entities_pins.json"},"designator":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN54_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_29","method":"text","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 GPIO_EMC_29","method":"chip_link"},"chip_pin_note":{"url":"https://github.com/PaulStoffregen/cores/blob/master/teensy4/core_pins.h","quote":"#define CORE_PIN54_CONFIG\tIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_29","method":"text","fragment":"entities_pins.json"}},"chip_pin":{"pin":"GPIO_EMC_29","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":22,"quote":"SCK2 D1 49 * 54 * D3 MISO2 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"D54","category":"gpio"},{"src":{"page":22,"quote":"SCK2 D1 49 * 54 * D3 MISO2 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"interrupt","category":"interrupt"},{"src":{"page":22,"quote":"SCK2 D1 49 * 54 * D3 MISO2 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"PWM","category":"pwm"},{"src":{"page":22,"quote":"SCK2 D1 49 * 54 * D3 MISO2 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"D3","category":"qspi"},{"src":{"page":22,"quote":"SCK2 D1 49 * 54 * D3 MISO2 PWM","method":"derived","fragment":"functions_pins.json"},"signal":"MISO2","category":"spi"},{"src":{"page":109,"quote":"| GPIO_EMC_29 | E1 | NVCC_EMC | Digital GPIO | ALT5 | GPIO4.IO[29] | Input | Keeper | Input | Keeper |","method":"table","fragment":"functions_default.json","table_id":"109_1"},"via":"chip u1 GPIO_EMC_29","note":"default (reset) mux function","signal":"GPIO4.IO[29]","category":"gpio"}],"electrical":{"ioh":[{"max":0.004,"src":{"page":7,"quote":"The recommended maximum output current is 4mA.","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":4,"unit":"mA"},"unit":"A","category":"operating","parameter":"Recommended max output current (board)"}],"iol":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output current | IOL | VDDE = 3.3 V, VOL = 0.45 V,  ipp_dse as follows: 001 010 011 110 101 110 111 | — | 1 1 2 2 2 4 4 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"typ":0.004,"via":"chip u1 GPIO_EMC_29","orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Low-level output current (max drive)","conditions":"VDDE=3.3 V, VOL=0.45 V; 4 mA at DSE=110/111, 2 mA at 011–101, 1 mA at 001/010"}],"vih":[{"max":3.3,"min":2.31,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-Level input voltage1,2 | VIH | — | 0.7 x NVCC_XXX X | — | NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_29","unit":"V","category":"characteristic","parameter":"High-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0.7×NVCC … NVCC"}],"vil":[{"max":0.99,"min":0,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-Level input voltage1,2 | VIL | — | 0 | — | 0.3 x NVCC_XX XX | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_29","unit":"V","category":"characteristic","parameter":"Low-level input voltage @ 3.3 V","conditions":"NVCC_xxxx=3.3V; 0 … 0.3×NVCC"}],"voh":[{"min":3.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| High-level output voltage1 | VOH | Ioh= -0.1mA (ipp_dse=001,010) Ioh= -1mA (ipp_dse=011,100,101,110,111) | NVCC_XXX X-0.15 | — | – | V |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_29","unit":"V","category":"characteristic","parameter":"High-level output voltage @ 1 mA","conditions":"NVCC_xxxx=3.3V; NVCC−0.15 V at Ioh=−1 mA (DSE 011…111)"}],"vol":[{"max":0.15,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Low-level output voltage1 | VOL | Iol= 0.1mA (ipp_dse=001,010) Iol= 1mA (ipp_dse=011,100,101,110,111) | – | — | 0.15 | V |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_29","unit":"V","category":"characteristic","parameter":"Low-level output voltage @ 1 mA","conditions":"Iol=1 mA (DSE 011…111)"}],"keeper":[{"max":175000,"min":105000,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Keeper Circuit Resistance | R_Keeper | VI =0.3 x NVCC_XXXX, VI = 0.7 x NVCC_XXXX | 105 | — | 175 | k |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_EMC_29","orig":{"max":175,"min":105,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Keeper circuit resistance"}],"pull_up":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Pull-up resistor (47_k PU) | RPU_47K | Vin=0V | — | — | 100 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"37_1"},"typ":47000,"via":"chip u1 GPIO_EMC_29","orig":{"typ":47,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Selectable pull-up (22k / 47k / 100k)","conditions":"software-selectable 22 kΩ, 47 kΩ or 100 kΩ pull-up (PUS field); 47 kΩ shown"}],"pull_down":[{"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Pull-down resistor (100_k PD) | RPD_100K | Vin=NVCC_XXXX | — | — | 48 | A |","method":"derived","fragment":"ratings_pins.json","table_id":"38_1"},"typ":100000,"via":"chip u1 GPIO_EMC_29","orig":{"typ":100,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"Pull-down resistor"}],"hysteresis":[{"min":0.25,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":37,"quote":"| Input Hysteresis (NVCC_XXXX=3.3V) | VHYS_HighV DD | NVCC_XXXX=3.3V | 250 | — | — | mV |","method":"table","fragment":"ratings_pins.json","table_id":"37_1"},"via":"chip u1 GPIO_EMC_29","orig":{"min":250,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"Input hysteresis @ 3.3 V","conditions":"NVCC_xxxx=3.3V"}],"io_voltage":[{"src":{"page":7,"quote":"Output HIGH is 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO logic level"}],"input_leakage":[{"max":0.000001,"min":-0.000001,"src":{"doc":"MIMXRT1062DVJ6B datasheet","page":38,"quote":"| Input current (no PU/PD) | IIN | VI = 0, VI = NVCC_XXXX | -1 | — | 1 | A |","method":"table","fragment":"ratings_pins.json","table_id":"38_1"},"via":"chip u1 GPIO_EMC_29","orig":{"max":1,"min":-1,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Input current (no PU/PD)"}],"abs_max_voltage":[{"max":3.3,"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","unit":"V","category":"absolute_max","parameter":"Max pin voltage (board note)","conditions":"do not drive any pin above 3.3 V (except VIN & VUSB)"}],"output_impedance":[{"max":150,"min":21,"src":{"page":7,"quote":"The output impedance of each digital output may be controlled in 7 steps, ranging from 150 ohms (weakest) up to about 21 ohms (strongest).","method":"text","fragment":"ratings_board.json"},"via":"group:io","orig":{"max":150,"min":21,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Output drive strength (7 steps)","conditions":"software-selected; 150 Ω weakest … ~21 Ω strongest"}],"five_volt_tolerant":[{"src":{"page":7,"quote":"Digital pins may be used to receive signals. Teensy 4.1 pins default to INPUT most with a \"keeper\" resistor. Teensy 4.1 pins accept 0 to 3.3V signals. The pins are not 5V tolerant. Do not drive any digital pin higher than 3.3V.","method":"text","fragment":"ratings_board.json"},"via":"group:io","value":false,"category":"absolute_max","parameter":"5 V tolerant"}]},"entity_type":"pin"},{"id":"ONOFF","attrs":{"kind":"control","label":"On/Off","number":"M6","chip_pin":"ONOFF","position":"ONOFF","connector":"inner_power_row","designator":"ONOFF","power_domain":"VDD_SNVS_IN","chip_pin_note":"card label On/Off ↔ RT1062 ONOFF pad (derived by name)"},"sources":[{"page":22,"quote":"On/Off 46 DAT3 RX5 PWM","method":"derived","fragment":"entities_pins.json"}],"attr_src":{"kind":{"page":22,"quote":"On/Off 46 DAT3 RX5 PWM","method":"derived","fragment":"entities_pins.json"},"label":{"page":22,"quote":"On/Off 46 DAT3 RX5 PWM","method":"derived","fragment":"entities_pins.json"},"number":{"via":"chip u1 ONOFF","method":"chip_link"},"chip_pin":{"page":22,"quote":"On/Off 46 DAT3 RX5 PWM","method":"derived","fragment":"entities_pins.json"},"position":{"page":22,"quote":"On/Off 46 DAT3 RX5 PWM","method":"derived","fragment":"entities_pins.json"},"connector":{"page":22,"quote":"On/Off 46 DAT3 RX5 PWM","method":"derived","fragment":"entities_pins.json"},"designator":{"page":22,"quote":"On/Off 46 DAT3 RX5 PWM","method":"derived","fragment":"entities_pins.json"},"power_domain":{"via":"chip u1 ONOFF","method":"chip_link"},"chip_pin_note":{"page":22,"quote":"On/Off 46 DAT3 RX5 PWM","method":"derived","fragment":"entities_pins.json"}},"chip_pin":{"pin":"ONOFF","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":14,"quote":"A special low power state which turns off the 3.3V power can be controlled by the On/Off pin. A pushbutton is meant to be connected between On/Off and GND. While running, holding the button for 4 seconds turns off power. Pressing for 0.5 seconds while power is off turns the 3.3V power back on and re","method":"text","fragment":"functions_pins.json"},"signal":"On/Off pushbutton (hold 4 s = off, 0.5 s = on)","category":"control"},{"src":{"page":110,"quote":"| ONOFF | M6 | VDD_SNVS_I N | Digital GPIO | ALT0 | ONOFF | Input | 100 K PU | Input | 100 K PU |","method":"table","fragment":"functions_default.json","table_id":"110_1"},"via":"chip u1 ONOFF","note":"default (reset) mux function","signal":"ONOFF","category":"control"}],"electrical":{},"entity_type":"pin"},{"id":"PROGRAM","attrs":{"kind":"control","note":"enters bootloader via the program chip (U2), not an RT1062 pad","label":"Program","position":"PROGRAM","connector":"inner_power_row","designator":"PROGRAM"},"sources":[{"page":22,"quote":"Program 45 CMD SCK2 SCL1 PWM","method":"derived","fragment":"entities_pins.json"}],"attr_src":{"kind":{"page":22,"quote":"Program 45 CMD SCK2 SCL1 PWM","method":"derived","fragment":"entities_pins.json"},"note":{"page":22,"quote":"Program 45 CMD SCK2 SCL1 PWM","method":"derived","fragment":"entities_pins.json"},"label":{"page":22,"quote":"Program 45 CMD SCK2 SCL1 PWM","method":"derived","fragment":"entities_pins.json"},"position":{"page":22,"quote":"Program 45 CMD SCK2 SCL1 PWM","method":"derived","fragment":"entities_pins.json"},"connector":{"page":22,"quote":"Program 45 CMD SCK2 SCL1 PWM","method":"derived","fragment":"entities_pins.json"},"designator":{"page":22,"quote":"Program 45 CMD SCK2 SCL1 PWM","method":"derived","fragment":"entities_pins.json"}},"functions":[{"src":{"page":22,"quote":"USBHost Ethernet USBDevice","method":"text","fragment":"functions_pins.json"},"signal":"Program (bootloader) button input","category":"control"}],"electrical":{},"entity_type":"pin"},{"id":"GND_I","attrs":{"kind":"ground","label":"GND","position":"GND_I","connector":"inner_power_row","designator":"GND_I"},"sources":[{"page":22,"quote":"GND 3.3V","method":"derived","fragment":"entities_pins.json"}],"attr_src":{"kind":{"page":22,"quote":"GND 3.3V","method":"derived","fragment":"entities_pins.json"},"label":{"page":22,"quote":"GND 3.3V","method":"derived","fragment":"entities_pins.json"},"position":{"page":22,"quote":"GND 3.3V","method":"derived","fragment":"entities_pins.json"},"connector":{"page":22,"quote":"GND 3.3V","method":"derived","fragment":"entities_pins.json"},"designator":{"page":22,"quote":"GND 3.3V","method":"derived","fragment":"entities_pins.json"}},"functions":[],"electrical":{},"entity_type":"pin"},{"id":"3V3_I","attrs":{"kind":"power_out","label":"3.3V","position":"3V3_I","connector":"inner_power_row","designator":"3V3_I"},"sources":[{"page":22,"quote":"3.3V 44 CLK CS2 SDA1 PWM","method":"derived","fragment":"entities_pins.json"}],"attr_src":{"kind":{"page":22,"quote":"3.3V 44 CLK CS2 SDA1 PWM","method":"derived","fragment":"entities_pins.json"},"label":{"page":22,"quote":"3.3V 44 CLK CS2 SDA1 PWM","method":"derived","fragment":"entities_pins.json"},"position":{"page":22,"quote":"3.3V 44 CLK CS2 SDA1 PWM","method":"derived","fragment":"entities_pins.json"},"connector":{"page":22,"quote":"3.3V 44 CLK CS2 SDA1 PWM","method":"derived","fragment":"entities_pins.json"},"designator":{"page":22,"quote":"3.3V 44 CLK CS2 SDA1 PWM","method":"derived","fragment":"entities_pins.json"}},"functions":[],"electrical":{"output_current":[{"max":0.25,"src":{"page":14,"quote":"The recommended maximum for external 3.3V usage is 250mA.","method":"text","fragment":"ratings_board.json"},"via":"direct","orig":{"max":250,"unit":"mA"},"unit":"A","category":"operating","parameter":"3.3V external load (recommended max)"}],"output_voltage":[{"src":{"page":14,"quote":"Teensy 4.1 has a voltage regulator which reduces the 5V VUSB / VIN power to 3.3V for use by the main processor and most other parts.","method":"text","fragment":"ratings_board.json"},"typ":3.3,"via":"direct","unit":"V","category":"operating","parameter":"3.3V rail"}]},"entity_type":"pin"},{"id":"VBAT","attrs":{"kind":"power_in","note":"3 V coin cell (CR2032) for RTC and power state","label":"VBAT","position":"VBAT","connector":"inner_power_row","designator":"VBAT"},"sources":[{"page":22,"quote":"VBAT GND","method":"derived","fragment":"entities_pins.json"}],"attr_src":{"kind":{"page":22,"quote":"VBAT GND","method":"derived","fragment":"entities_pins.json"},"note":{"page":22,"quote":"VBAT GND","method":"derived","fragment":"entities_pins.json"},"label":{"page":22,"quote":"VBAT GND","method":"derived","fragment":"entities_pins.json"},"position":{"page":22,"quote":"VBAT GND","method":"derived","fragment":"entities_pins.json"},"connector":{"page":22,"quote":"VBAT GND","method":"derived","fragment":"entities_pins.json"},"designator":{"page":22,"quote":"VBAT GND","method":"derived","fragment":"entities_pins.json"}},"functions":[{"src":{"page":14,"quote":"A 3 volt coin cell may be connected to VBAT & GND to allow the RTC to keep track of date / time while power is off. A CR2032 type battery is recommended, though other 3V coin cells may also be used.","method":"text","fragment":"functions_pins.json"},"signal":"RTC backup coin cell","category":"power_in"}],"electrical":{"input_voltage":[{"src":{"page":14,"quote":"A 3 volt coin cell may be connected to VBAT & GND to allow the RTC to keep track of date / time while power is off. A CR2032 type battery is recommended, though other 3V coin cells may also be used.","method":"text","fragment":"ratings_board.json"},"typ":3,"via":"direct","unit":"V","category":"operating","parameter":"VBAT coin cell"}]},"entity_type":"pin"},{"id":"UH_5V","attrs":{"kind":"power_out","label":"USB Host +5V","position":"UH_5V","connector":"usb_host_header","designator":"UH_5V"},"sources":[{"page":22,"quote":"5 − + N N QSPIMemory CuttoseparateVINfromVUSB,","method":"derived","fragment":"entities_pins.json"}],"attr_src":{"kind":{"page":22,"quote":"5 − + N N QSPIMemory CuttoseparateVINfromVUSB,","method":"derived","fragment":"entities_pins.json"},"label":{"page":22,"quote":"5 − + N N QSPIMemory CuttoseparateVINfromVUSB,","method":"derived","fragment":"entities_pins.json"},"position":{"page":22,"quote":"5 − + N N QSPIMemory CuttoseparateVINfromVUSB,","method":"derived","fragment":"entities_pins.json"},"connector":{"page":22,"quote":"5 − + N N QSPIMemory CuttoseparateVINfromVUSB,","method":"derived","fragment":"entities_pins.json"},"designator":{"page":22,"quote":"5 − + N N QSPIMemory CuttoseparateVINfromVUSB,","method":"derived","fragment":"entities_pins.json"}},"functions":[],"electrical":{},"entity_type":"pin"},{"id":"UH_DM","attrs":{"kind":"usb","label":"USB Host D−","position":"UH_DM","connector":"usb_host_header","designator":"UH_DM"},"sources":[{"page":22,"quote":"USBHost Ethernet USBDevice","method":"derived","fragment":"entities_pins.json"}],"attr_src":{"kind":{"page":22,"quote":"USBHost Ethernet USBDevice","method":"derived","fragment":"entities_pins.json"},"label":{"page":22,"quote":"USBHost Ethernet USBDevice","method":"derived","fragment":"entities_pins.json"},"position":{"page":22,"quote":"USBHost Ethernet USBDevice","method":"derived","fragment":"entities_pins.json"},"connector":{"page":22,"quote":"USBHost Ethernet USBDevice","method":"derived","fragment":"entities_pins.json"},"designator":{"page":22,"quote":"USBHost Ethernet USBDevice","method":"derived","fragment":"entities_pins.json"}},"functions":[{"src":{"page":22,"quote":"USBHost Ethernet USBDevice","method":"text","fragment":"functions_pins.json"},"signal":"USB host D−","category":"usb"}],"electrical":{},"entity_type":"pin"},{"id":"UH_DP","attrs":{"kind":"usb","label":"USB Host D+","position":"UH_DP","connector":"usb_host_header","designator":"UH_DP"},"sources":[{"page":22,"quote":"USBHost Ethernet USBDevice","method":"derived","fragment":"entities_pins.json"}],"attr_src":{"kind":{"page":22,"quote":"USBHost Ethernet USBDevice","method":"derived","fragment":"entities_pins.json"},"label":{"page":22,"quote":"USBHost Ethernet USBDevice","method":"derived","fragment":"entities_pins.json"},"position":{"page":22,"quote":"USBHost Ethernet USBDevice","method":"derived","fragment":"entities_pins.json"},"connector":{"page":22,"quote":"USBHost Ethernet USBDevice","method":"derived","fragment":"entities_pins.json"},"designator":{"page":22,"quote":"USBHost Ethernet USBDevice","method":"derived","fragment":"entities_pins.json"}},"functions":[{"src":{"page":22,"quote":"USBHost Ethernet USBDevice","method":"text","fragment":"functions_pins.json"},"signal":"USB host D+","category":"usb"}],"electrical":{},"entity_type":"pin"},{"id":"UH_GND1","attrs":{"kind":"ground","label":"GND","position":"UH_GND1","connector":"usb_host_header","designator":"UH_GND1"},"sources":[{"page":22,"quote":"USBHost Ethernet USBDevice","method":"derived","fragment":"entities_pins.json"}],"attr_src":{"kind":{"page":22,"quote":"USBHost Ethernet USBDevice","method":"derived","fragment":"entities_pins.json"},"label":{"page":22,"quote":"USBHost Ethernet USBDevice","method":"derived","fragment":"entities_pins.json"},"position":{"page":22,"quote":"USBHost Ethernet USBDevice","method":"derived","fragment":"entities_pins.json"},"connector":{"page":22,"quote":"USBHost Ethernet USBDevice","method":"derived","fragment":"entities_pins.json"},"designator":{"page":22,"quote":"USBHost Ethernet USBDevice","method":"derived","fragment":"entities_pins.json"}},"functions":[],"electrical":{},"entity_type":"pin"},{"id":"UH_GND2","attrs":{"kind":"ground","label":"GND","position":"UH_GND2","connector":"usb_host_header","designator":"UH_GND2"},"sources":[{"page":22,"quote":"USBHost Ethernet USBDevice","method":"derived","fragment":"entities_pins.json"}],"attr_src":{"kind":{"page":22,"quote":"USBHost Ethernet USBDevice","method":"derived","fragment":"entities_pins.json"},"label":{"page":22,"quote":"USBHost Ethernet USBDevice","method":"derived","fragment":"entities_pins.json"},"position":{"page":22,"quote":"USBHost Ethernet USBDevice","method":"derived","fragment":"entities_pins.json"},"connector":{"page":22,"quote":"USBHost Ethernet USBDevice","method":"derived","fragment":"entities_pins.json"},"designator":{"page":22,"quote":"USBHost Ethernet USBDevice","method":"derived","fragment":"entities_pins.json"}},"functions":[],"electrical":{},"entity_type":"pin"},{"id":"ETH_RXP","attrs":{"kind":"other","note":"DP83825I PHY magnetics-less pins for the Ethernet kit (MagJack)","label":"Ethernet RX+","position":"ETH_RXP","connector":"ethernet_header","designator":"ETH_RXP"},"sources":[{"page":22,"quote":"RX+ RX− VUSB","method":"derived","fragment":"entities_pins.json"}],"attr_src":{"kind":{"page":22,"quote":"RX+ RX− VUSB","method":"derived","fragment":"entities_pins.json"},"note":{"page":22,"quote":"RX+ RX− VUSB","method":"derived","fragment":"entities_pins.json"},"label":{"page":22,"quote":"RX+ RX− VUSB","method":"derived","fragment":"entities_pins.json"},"position":{"page":22,"quote":"RX+ RX− VUSB","method":"derived","fragment":"entities_pins.json"},"connector":{"page":22,"quote":"RX+ RX− VUSB","method":"derived","fragment":"entities_pins.json"},"designator":{"page":22,"quote":"RX+ RX− VUSB","method":"derived","fragment":"entities_pins.json"}},"functions":[{"src":{"page":22,"quote":"USBHost Ethernet USBDevice","method":"text","fragment":"functions_pins.json"},"signal":"Ethernet RX+","category":"ethernet"}],"electrical":{},"entity_type":"pin"},{"id":"ETH_RXN","attrs":{"kind":"other","note":"DP83825I PHY magnetics-less pins for the Ethernet kit (MagJack)","label":"Ethernet RX−","position":"ETH_RXN","connector":"ethernet_header","designator":"ETH_RXN"},"sources":[{"page":22,"quote":"RX+ RX− VUSB","method":"derived","fragment":"entities_pins.json"}],"attr_src":{"kind":{"page":22,"quote":"RX+ RX− VUSB","method":"derived","fragment":"entities_pins.json"},"note":{"page":22,"quote":"RX+ RX− VUSB","method":"derived","fragment":"entities_pins.json"},"label":{"page":22,"quote":"RX+ RX− VUSB","method":"derived","fragment":"entities_pins.json"},"position":{"page":22,"quote":"RX+ RX− VUSB","method":"derived","fragment":"entities_pins.json"},"connector":{"page":22,"quote":"RX+ RX− VUSB","method":"derived","fragment":"entities_pins.json"},"designator":{"page":22,"quote":"RX+ RX− VUSB","method":"derived","fragment":"entities_pins.json"}},"functions":[{"src":{"page":22,"quote":"USBHost Ethernet USBDevice","method":"text","fragment":"functions_pins.json"},"signal":"Ethernet RX−","category":"ethernet"}],"electrical":{},"entity_type":"pin"},{"id":"ETH_LED","attrs":{"kind":"control","label":"Ethernet LED","position":"ETH_LED","connector":"ethernet_header","designator":"ETH_LED"},"sources":[{"page":22,"quote":"LED GND D−","method":"derived","fragment":"entities_pins.json"}],"attr_src":{"kind":{"page":22,"quote":"LED GND D−","method":"derived","fragment":"entities_pins.json"},"label":{"page":22,"quote":"LED GND D−","method":"derived","fragment":"entities_pins.json"},"position":{"page":22,"quote":"LED GND D−","method":"derived","fragment":"entities_pins.json"},"connector":{"page":22,"quote":"LED GND D−","method":"derived","fragment":"entities_pins.json"},"designator":{"page":22,"quote":"LED GND D−","method":"derived","fragment":"entities_pins.json"}},"functions":[{"src":{"page":22,"quote":"USBHost Ethernet USBDevice","method":"text","fragment":"functions_pins.json"},"signal":"Ethernet link LED","category":"led"}],"electrical":{},"entity_type":"pin"},{"id":"ETH_GND","attrs":{"kind":"ground","label":"GND","position":"ETH_GND","connector":"ethernet_header","designator":"ETH_GND"},"sources":[{"page":22,"quote":"LED GND D−","method":"derived","fragment":"entities_pins.json"}],"attr_src":{"kind":{"page":22,"quote":"LED GND D−","method":"derived","fragment":"entities_pins.json"},"label":{"page":22,"quote":"LED GND D−","method":"derived","fragment":"entities_pins.json"},"position":{"page":22,"quote":"LED GND D−","method":"derived","fragment":"entities_pins.json"},"connector":{"page":22,"quote":"LED GND D−","method":"derived","fragment":"entities_pins.json"},"designator":{"page":22,"quote":"LED GND D−","method":"derived","fragment":"entities_pins.json"}},"functions":[],"electrical":{},"entity_type":"pin"},{"id":"ETH_TXN","attrs":{"kind":"other","note":"DP83825I PHY magnetics-less pins for the Ethernet kit (MagJack)","label":"Ethernet TX−","position":"ETH_TXN","connector":"ethernet_header","designator":"ETH_TXN"},"sources":[{"page":22,"quote":"TX− TX+ D+","method":"derived","fragment":"entities_pins.json"}],"attr_src":{"kind":{"page":22,"quote":"TX− TX+ D+","method":"derived","fragment":"entities_pins.json"},"note":{"page":22,"quote":"TX− TX+ D+","method":"derived","fragment":"entities_pins.json"},"label":{"page":22,"quote":"TX− TX+ D+","method":"derived","fragment":"entities_pins.json"},"position":{"page":22,"quote":"TX− TX+ D+","method":"derived","fragment":"entities_pins.json"},"connector":{"page":22,"quote":"TX− TX+ D+","method":"derived","fragment":"entities_pins.json"},"designator":{"page":22,"quote":"TX− TX+ D+","method":"derived","fragment":"entities_pins.json"}},"functions":[{"src":{"page":22,"quote":"USBHost Ethernet USBDevice","method":"text","fragment":"functions_pins.json"},"signal":"Ethernet TX−","category":"ethernet"}],"electrical":{},"entity_type":"pin"},{"id":"ETH_TXP","attrs":{"kind":"other","note":"DP83825I PHY magnetics-less pins for the Ethernet kit (MagJack)","label":"Ethernet TX+","position":"ETH_TXP","connector":"ethernet_header","designator":"ETH_TXP"},"sources":[{"page":22,"quote":"TX− TX+ D+","method":"derived","fragment":"entities_pins.json"}],"attr_src":{"kind":{"page":22,"quote":"TX− TX+ D+","method":"derived","fragment":"entities_pins.json"},"note":{"page":22,"quote":"TX− TX+ D+","method":"derived","fragment":"entities_pins.json"},"label":{"page":22,"quote":"TX− TX+ D+","method":"derived","fragment":"entities_pins.json"},"position":{"page":22,"quote":"TX− TX+ D+","method":"derived","fragment":"entities_pins.json"},"connector":{"page":22,"quote":"TX− TX+ D+","method":"derived","fragment":"entities_pins.json"},"designator":{"page":22,"quote":"TX− TX+ D+","method":"derived","fragment":"entities_pins.json"}},"functions":[{"src":{"page":22,"quote":"USBHost Ethernet USBDevice","method":"text","fragment":"functions_pins.json"},"signal":"Ethernet TX+","category":"ethernet"}],"electrical":{},"entity_type":"pin"},{"id":"VUSB","attrs":{"kind":"power_in","label":"VUSB","position":"VUSB","connector":"bottom_pads","designator":"VUSB"},"sources":[{"page":22,"quote":"5 − + N N QSPIMemory CuttoseparateVINfromVUSB,","method":"derived","fragment":"entities_pins.json"}],"attr_src":{"kind":{"page":22,"quote":"5 − + N N QSPIMemory CuttoseparateVINfromVUSB,","method":"derived","fragment":"entities_pins.json"},"label":{"page":22,"quote":"5 − + N N QSPIMemory CuttoseparateVINfromVUSB,","method":"derived","fragment":"entities_pins.json"},"position":{"page":22,"quote":"5 − + N N QSPIMemory CuttoseparateVINfromVUSB,","method":"derived","fragment":"entities_pins.json"},"connector":{"page":22,"quote":"5 − + N N QSPIMemory CuttoseparateVINfromVUSB,","method":"derived","fragment":"entities_pins.json"},"designator":{"page":22,"quote":"5 − + N N QSPIMemory CuttoseparateVINfromVUSB,","method":"derived","fragment":"entities_pins.json"}},"functions":[],"electrical":{"input_voltage":[{"src":{"page":14,"quote":"Teensy 4.1 has a voltage regulator which reduces the 5V VUSB / VIN power to 3.3V for use by the main processor and most other parts.","method":"text","fragment":"ratings_board.json"},"typ":5,"via":"direct","unit":"V","category":"operating","parameter":"VUSB (USB 5 V)"}]},"entity_type":"pin"},{"id":"Q_3V3_1","attrs":{"kind":"power_out","label":"3.3V","position":"Q_3V3_1","connector":"bottom_smt_pads","designator":"Q_3V3_1"},"sources":[{"page":22,"quote":"RX8 CS0 48 3.3V","method":"derived","fragment":"entities_pins.json"}],"attr_src":{"kind":{"page":22,"quote":"RX8 CS0 48 3.3V","method":"derived","fragment":"entities_pins.json"},"label":{"page":22,"quote":"RX8 CS0 48 3.3V","method":"derived","fragment":"entities_pins.json"},"position":{"page":22,"quote":"RX8 CS0 48 3.3V","method":"derived","fragment":"entities_pins.json"},"connector":{"page":22,"quote":"RX8 CS0 48 3.3V","method":"derived","fragment":"entities_pins.json"},"designator":{"page":22,"quote":"RX8 CS0 48 3.3V","method":"derived","fragment":"entities_pins.json"}},"functions":[],"electrical":{"output_current":[{"max":0.25,"src":{"page":14,"quote":"The recommended maximum for external 3.3V usage is 250mA.","method":"text","fragment":"ratings_board.json"},"via":"direct","orig":{"max":250,"unit":"mA"},"unit":"A","category":"operating","parameter":"3.3V external load (recommended max)"}],"output_voltage":[{"src":{"page":14,"quote":"Teensy 4.1 has a voltage regulator which reduces the 5V VUSB / VIN power to 3.3V for use by the main processor and most other parts.","method":"text","fragment":"ratings_board.json"},"typ":3.3,"via":"direct","unit":"V","category":"operating","parameter":"3.3V rail"}]},"entity_type":"pin"},{"id":"Q_GND","attrs":{"kind":"ground","label":"GND","position":"Q_GND","connector":"bottom_smt_pads","designator":"Q_GND"},"sources":[{"page":22,"quote":"GND 52 * D0 RX1","method":"derived","fragment":"entities_pins.json"}],"attr_src":{"kind":{"page":22,"quote":"GND 52 * D0 RX1","method":"derived","fragment":"entities_pins.json"},"label":{"page":22,"quote":"GND 52 * D0 RX1","method":"derived","fragment":"entities_pins.json"},"position":{"page":22,"quote":"GND 52 * D0 RX1","method":"derived","fragment":"entities_pins.json"},"connector":{"page":22,"quote":"GND 52 * D0 RX1","method":"derived","fragment":"entities_pins.json"},"designator":{"page":22,"quote":"GND 52 * D0 RX1","method":"derived","fragment":"entities_pins.json"}},"functions":[],"electrical":{},"entity_type":"pin"}],"taxonomy":{"schematic":{"role":"identity_overview","definition":"A full circuit schematic figure of the board (caption mentions schematic)"},"cover_legal":{"role":"other","definition":"Cover page, colophon, licence, legal disclaimer or trademark notice"},"gpio_adc_usage":{"role":"electrical_ratings","definition":"Application notes about GPIO voltage levels and ADC usage/limitations"},"pinout_diagram":{"role":"pins_or_terminals","definition":"A pinout or pin-numbering figure (its caption mentions pinout or pin numbering) mapping physical header pins to signal names and alternate functions"},"design_files_cad":{"role":"identity_overview","definition":"Links to design resources: schematic, PCB layout, STEP 3D model, Fritzing files"},"pin_descriptions":{"role":"pins_or_terminals","definition":"Text describing what individual pins do (power pins, RUN, ADC_VREF, internal GPIO, test points)"},"revision_history":{"role":"other","definition":"Documentation release / revision history"},"power_consumption":{"role":"performance","definition":"Measured supply current / power consumption tables or graphs in different operating modes"},"table_of_contents":{"role":"other","definition":"Table of contents listing sections and page numbers"},"mechanical_drawing":{"role":"mechanical_dimensions","definition":"Dimensioned mechanical drawing or text giving board size, thickness, hole positions and diameters"},"component_locations":{"role":"mechanical_dimensions","definition":"Component placement / locations drawing of the board"},"power_supply_design":{"role":"electrical_ratings","definition":"Power chain, regulator, powering the board from USB, batteries or external supplies"},"operating_conditions":{"role":"electrical_ratings","definition":"Recommended operating conditions: temperature range and allowed supply voltages"},"ordering_availability":{"role":"ordering_commercial","definition":"Ordering codes, part numbers, EAN, prices, minimum order quantity, availability guarantee"},"programming_debug_usb":{"role":"software_usage","definition":"Programming the flash, USB device/host usage, SWD debugging"},"smt_footprint_stencil":{"role":"mechanical_dimensions","definition":"Surface-mount footprint, pad layout or paste stencil drawings for mounting the board as a module"},"board_overview_features":{"role":"identity_overview","definition":"Overview of the board: what it is, key features list, main chip capabilities (cores, clock, memory, peripherals)"}},"variants":{},"commercial":{"other":{},"lifecycle":"active","checked_at":"2026-09-24T22:13:06+00:00","compliance":["FCC / ISED","CE / UKCA","RoHS","REACH"],"ordering_codes":[{"code":"TEENSY41","description":"with Ethernet chip"},{"code":"TEENSY41_NE","description":"without Ethernet chip"},{"code":"TEENSY41_LOCK","description":"lockable, with Ethernet"},{"code":"TEENSY41_NE_LOCK","description":"lockable, without Ethernet"}]},"mechanical":{"dims":{"width":{"src":{"page":19,"quote":"17.78 ±0.6","figure":"p019_img2.png","method":"drawing"},"unit":"mm","value":17.78},"length":{"src":{"page":19,"quote":"60.96","figure":"p019_img2.png","method":"drawing"},"unit":"mm","value":60.96},"pin_pitch":{"src":{"page":19,"quote":"2.54","figure":"p019_img2.png","method":"drawing"},"unit":"mm","value":2.54},"thickness":{"src":{"page":19,"quote":"1.57","figure":"p019_img2.png","method":"drawing"},"unit":"mm","value":1.57},"header_row_spacing":{"src":{"page":19,"quote":"15.24","figure":"p019_img2.png","method":"drawing"},"unit":"mm","value":15.24}},"kind":"mechanical","holes":[],"units":"mm","origin":"x along the 60.96 mm length from the USB end; y across; z=0 PCB bottom","features":[{"h":2.5,"l":5,"w":7.5,"x":-0.6,"y":5.140000000000001,"src":{"page":19,"quote":"7.5 / 5.0 / 0.6 / 2.5","figure":"p019_img2.png","method":"drawing"},"name":"USB Micro-B receptacle","side":"top","overhang":true},{"h":1.8,"l":3,"w":2.5,"x":41.43,"y":7.640000000000001,"src":{"page":19,"quote":"41.66 / 3.0 / 2.5 / 1.8","figure":"p019_img2.png","method":"drawing"},"name":"Program pushbutton","side":"top","assumed":"button y position read from the drawing (centred)","overhang":false},{"h":1.2,"l":12,"w":12,"x":21,"y":2.9,"src":{"page":19,"quote":"MIMXRT1062 DVJ6A","figure":"p019_img1.jpg","method":"drawing"},"name":"i.MX RT1062 BGA","side":"top","assumed":"12×12 mm package per the RT1062 data sheet; placement from the photo; height not given","overhang":false}],"archetype":"pcb_board","assumptions":{}},"page_index":[{"page":1,"tags":["ordering_availability"],"primary":"ordering_availability"},{"page":2,"tags":[],"primary":"none_of_these"},{"page":3,"tags":["board_overview_features"],"primary":"board_overview_features"},{"page":4,"tags":["programming_debug_usb"],"primary":"programming_debug_usb"},{"page":5,"tags":["board_overview_features"],"primary":"board_overview_features"},{"page":6,"tags":["pinout_diagram"],"primary":"pinout_diagram"},{"page":7,"tags":["gpio_adc_usage"],"primary":"gpio_adc_usage"},{"page":8,"tags":["gpio_adc_usage"],"primary":"gpio_adc_usage"},{"page":9,"tags":[],"primary":"programming_debug_usb"},{"page":10,"tags":[],"primary":"none_of_these"},{"page":11,"tags":[],"primary":"none_of_these"},{"page":12,"tags":[],"primary":"none_of_these"},{"page":13,"tags":[],"primary":"none_of_these"},{"page":14,"tags":["pin_descriptions","power_supply_design"],"primary":"power_supply_design"},{"page":15,"tags":[],"primary":"board_overview_features"},{"page":16,"tags":["programming_debug_usb"],"primary":"programming_debug_usb"},{"page":17,"tags":[],"primary":"programming_debug_usb"},{"page":18,"tags":["board_overview_features"],"primary":"board_overview_features"},{"page":19,"tags":["mechanical_drawing","schematic","component_locations"],"primary":"design_files_cad"},{"page":20,"tags":[],"primary":"cover_legal"},{"page":21,"tags":["pinout_diagram","component_locations"],"primary":"pinout_diagram"},{"page":22,"tags":["pinout_diagram","power_supply_design"],"primary":"pinout_diagram"}],"performance":[],"schema_name":"datasheet-1","part_ratings":{"core_voltage":[{"src":{"page":14,"quote":"A DC-DC buck converter creates lower voltage needed for the CPU. Software can control this voltage, in 50 mV steps. At 600 MHz, the CPU runs on 1.25V. For 528 MHz and lower, 1.15V is used. At 24 MHz, the CPU runs on only 0.95 volts. When overclocking, higher voltages are automatically used.","method":"text","fragment":"ratings_board.json"},"typ":1.25,"unit":"V","category":"operating","parameter":"CPU core voltage at 600 MHz","conditions":"1.15 V at ≤528 MHz, 0.95 V at 24 MHz"}],"supply_current":[{"src":{"page":14,"quote":"When running at 600 MHz, Teensy 4.0 consumes approximately 100 mA current. Reducing CPU speed to 528 MHz or lower reduces power consumption.","method":"text","fragment":"ratings_board.json"},"typ":0.1,"orig":{"typ":100,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Board current at 600 MHz","conditions":"page text says 'Teensy 4.0' in the Teensy 4.1 power section; value kept with that caveat"}]}},"use_cases":["robot-motor-control","wired-networking","usb-devices","learning-prototyping"],"commercial":{"other":{},"lifecycle":"active","checked_at":"2026-09-24T22:13:06+00:00","compliance":["FCC / ISED","CE / UKCA","RoHS","REACH"],"ordering_codes":[{"code":"TEENSY41","description":"with Ethernet chip"},{"code":"TEENSY41_NE","description":"without Ethernet chip"},{"code":"TEENSY41_LOCK","description":"lockable, with Ethernet"},{"code":"TEENSY41_NE_LOCK","description":"lockable, without Ethernet"}]},"assembly_label":"Development board","assembly_level":3,"search_aliases":["PJRC Teensy 4.1","TEENSY41","Teensy4.1","Teensy 41"],"children_summary":[{"id":"988c93b9-e010-52f5-a705-19fb5583bd0a--mcu","part_number":"MIMXRT1062DVJ6B","manufacturer":"NXP Semiconductors","role":"main_processor","architecture":"Arm Cortex-M7","clock_mhz":600,"memory":{"other":{"rom_kb":null},"sram_kb":1024}},{"id":"988c93b9-e010-52f5-a705-19fb5583bd0a--flash","part_number":"W25Q64JV-DTR (8 MB)","manufacturer":"Winbond","role":"flash_memory","architecture":null,"clock_mhz":null,"memory":null},{"id":"988c93b9-e010-52f5-a705-19fb5583bd0a--phy","part_number":"DP83825I","manufacturer":"Texas Instruments","role":"ethernet_phy","architecture":null,"clock_mhz":null,"memory":null},{"id":"988c93b9-e010-52f5-a705-19fb5583bd0a--u2","part_number":"GD32E230F8 (after June 2022)","manufacturer":"GigaDevice","role":"bootloader_chip","architecture":null,"clock_mhz":null,"memory":null},{"id":"988c93b9-e010-52f5-a705-19fb5583bd0a--u4","part_number":"TLV75533P (after March 2023; earlier TLV75733P / NCV8186AMN330TAG)","manufacturer":"Texas Instruments","role":"ldo_regulator","architecture":null,"clock_mhz":null,"memory":null}],"design":{"assets":[{"other":{},"kind":"datasheet","url":"https://www.pjrc.com/store/teensy41.html","label":"Datasheet","verification":"manufacturer","notes":null,"resolved_url":"https://www.pjrc.com/store/teensy41.html"},{"other":{},"kind":"image","url":"https://www.pjrc.com/store/teensy41_4.jpg","label":"Teensy 4.1 top view","verification":"manufacturer","notes":"inspected: top of board: MIMXRT1062 DVJ6B BGA, GD32 bootloader chip, micro-USB at left, micro-SD socket at right, 2×24 edge pin rows; saved at work/teensy-4-1/images/","resolved_url":"https://www.pjrc.com/store/teensy41_4.jpg"},{"other":{},"kind":"cad","url":"teensy-4-1.step","label":"STEP (generated from datasheet drawing)","verification":"generated","notes":"cad_check passed","resolved_url":"https://wlrumvsjnliyuuvzwnrt.supabase.co/storage/v1/object/public/geometry/teensy-4-1.step"}],"cad":{"verification":"generated","envelope_complete":false,"assumptions":["feature Program pushbutton: button y position read from the drawing (centred)","feature i.MX RT1062 BGA: 12×12 mm package per the RT1062 data sheet; placement from the photo; height not given"],"step_path":"teensy-4-1.step","mesh_path":"teensy-4-1.stl","footprint_svg_path":null,"bbox":{"length_mm":61.56,"width_mm":17.78,"height_mm":4.07},"features":[],"step_url":"https://wlrumvsjnliyuuvzwnrt.supabase.co/storage/v1/object/public/geometry/teensy-4-1.step","mesh_url":"https://wlrumvsjnliyuuvzwnrt.supabase.co/storage/v1/object/public/geometry/teensy-4-1.stl","footprint_svg_url":null},"limitations":["Generated geometry is an approximate mechanical envelope; inspect original manufacturer CAD when available.","Generated footprint_svg_path is an outline, not a verified electrical land pattern.","Xirkit does not run fit checks; download step_url and test fit against your own enclosure."]}}}