# PKCELL LiPo 3.7 V 2500 mAh LP785060

> PKCELL LP785060 lithium-polymer pouch cell: 3.7 V nominal, 2500 mAh (2375 mAh min), 4.2 V charge, 3.0 V cut-off, 1.5 A max continuous charge and discharge, ≥ 500 cycles, built-in 1S protection (R5478), 62.5 × 50.5 × 8.1 mm max, 50 g, JST PH 2-pin leads.

- Manufacturer: PKCELL
- Part number: LP785060
- Category: Batteries
- Canonical page: https://www.xirkit.io/products/pkcell-lipo-3-7-v-2500-mah-lp785060-70b2
- Pinout: https://www.xirkit.io/products/pkcell-lipo-3-7-v-2500-mah-lp785060-70b2/pinout
- Structured JSON: https://www.xirkit.io/products/pkcell-lipo-3-7-v-2500-mah-lp785060-70b2/data.json
- Source: Xirkit structured parts catalog — every value traced to a cited document; unknowns are explicit.

## Key specifications

| Property | Value |
| --- | --- |
| Chemistry | li-po |
| Form factor | pouch 785060 |
| Configuration | 1S1P |
| Nominal voltage | 3.7 V |
| Charge voltage | 4.2 V |
| Cut-off voltage | 3 V |
| Capacity | 2,500 mAh |
| Minimum capacity | 2,375 mAh |
| Energy | 10 Wh |
| Max continuous discharge | 1.5 A |
| Standard charge current | 1.25 A |
| Max charge current | 1.5 A |
| Protection circuit | built in |
| Cycle life | 500 cycles |
| Dimensions | 62.5 × 50.5 × 8.1 mm |
| Operating temperature | -20 to 60 °C |
| Certifications | RoHS, UN38.3 test report, MSDS |

## Pinout (2 pins, 0 with electrical limits)

| Pin | Position | Kind | Chip pad | Functions | VIH | VIL | VOH | VOL | IOH | IOL | 5 V tolerant |
| --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- |
| RED | JST PHR-2P | positive | — | red | — | — | — | — | — | — | — |
| BLACK | JST PHR-2P | negative | — | black | — | — | — | — | — | — | — |

## Where to buy

| Supplier | Price | Stock | Checked | URL |
| --- | --- | --- | --- | --- |
| www.adafruit.com | 14.95 USD | in_stock | 2026-09-28 | https://www.adafruit.com/product/328 |

## FAQ

**What voltage powers the PKCELL LiPo 3.7 V 2500 mAh LP785060?**

Supply range 3–4.2 V.

**How much does the PKCELL LiPo 3.7 V 2500 mAh LP785060 cost?**

From $14.95 at www.adafruit.com. Prices are observed unit prices before tax and shipping.

**What are the PKCELL LiPo 3.7 V 2500 mAh LP785060 dimensions?**

62.5 × 50.5 × 8.1 mm. A STEP model is available for enclosure fit checks.

**Where does this PKCELL LiPo 3.7 V 2500 mAh LP785060 data come from?**

Every value in this record is traced to a source — 2 documents including the board and chip datasheets — with the page and table cited per value. Unknowns are left explicit, never guessed.

## Sources

- [PKCELL LiPo 3.7 V 2500 mAh LP785060 datasheet](https://cdn-shop.adafruit.com/product-files/328/LP785060+2500mAh+3.7V+20190510.pdf)
- [www.adafruit.com listing](https://www.adafruit.com/product/328)

## Part graph

### Alternatives (by use case)

- [PKCELL 18650 Li-ion 3.7 V 2200 mAh (PCM)](https://www.xirkit.io/products/pkcell-18650-li-ion-3-7-v-2200-mah-pcm-2b9c) — Both serve battery-powered and portable builds — check the trade-offs; $14.95 vs $9.95

### Variants

- [PKCELL LiPo 3.7 V 1200 mAh LP503562](https://www.xirkit.io/products/pkcell-lipo-3-7-v-1200-mah-lp503562-3ff4) — Same PKCELL 1S LiPo pouch line: 3.7 V / 4.2 V, 3.0 V cut-off, built-in PCM, JST PH 2-pin leads (spec p2, drawings); 2500 vs 1200 mAh in a larger 62.5 × 50.5 × 8.1 mm pouch