{"publisher":"Xirkit — the structured parts marketplace","canonical":"https://www.xirkit.io/products/seeed-studio-xiao-esp32c3-99be","markdown":"https://www.xirkit.io/products/seeed-studio-xiao-esp32c3-99be/data.md","mcp":"https://www.xirkit.io/mcp","note":"Every value is traced to a cited source (see sources and per-value src). Null means unknown, never zero.","record":{"id":"99bec0e0-dcb0-5a46-81e1-f86f342553dd","mpn":"113991054","name":"Seeed Studio XIAO ESP32C3","manufacturer":"Seeed Studio","family":"dev_board","summary":"Thumb-sized ESP32-C3 (RISC-V 160 MHz, Wi-Fi 4 + BLE 5) board: 400 KB SRAM, 4 MB flash, 11 GPIO (4 ADC) at 3.3 V, USB-C, Li-ion charging, TLV75733 3.3 V LDO, castellated 21 × 17.8 mm.","schema_version":"3.0","revision":"v1.3","tags":["dev_board","wifi","bluetooth","iot","small form factor","beginner friendly","esp32-c3fh4","seeed","microcontroller","development board","i2c","spi","uart","usb","arduino","micropython"],"sources":[{"other":{},"id":"datasheet","url":"https://wiki.seeedstudio.com/XIAO_ESP32C3_Getting_Started/","title":"Seeed Studio XIAO ESP32C3 datasheet","publisher":"Seeed Studio","kind":"datasheet","retrieved_at":"2026-09-24T11:02:52+00:00","field_paths":["spec.compliance.certifications","spec.constraints.electrical.io_voltage_v","spec.constraints.electrical.logic_high_min_v","spec.constraints.electrical.max_current_ma","spec.constraints.electrical.pin_drive_max_ma","spec.constraints.electrical.supply_voltage_max_v","spec.constraints.electrical.supply_voltage_min_v","spec.constraints.electrical.supply_voltage_nominal_v","spec.constraints.thermal.operating_temp_max_c","spec.constraints.thermal.operating_temp_min_c","spec.geometry.cad.assumptions","spec.geometry.cad.bbox.height_mm","spec.geometry.cad.bbox.length_mm","spec.geometry.cad.bbox.width_mm","spec.geometry.cad.envelope_complete","spec.geometry.cad.mesh_path","spec.geometry.cad.step_path","spec.geometry.cad.verification","spec.geometry.dimensions.height_mm","spec.geometry.dimensions.length_mm","spec.geometry.dimensions.width_mm","spec.geometry.feature_boxes","spec.provides.capabilities","spec.provides.features","spec.provides.gpio_count","spec.provides.memory.flash_kb","spec.provides.memory.sram_kb","spec.provides.software_frameworks","spec.provides.wireless","spec.usage.connectors","spec.usage.pin_mappings","spec.usage.pinout","spec.usage.pinout_complete","spec.usage.requirements.data_inputs","spec.usage.requirements.power_inputs"],"notes":"sha256 eded10e78cac5ef54a27f6156f692eaea626120147aad80ea3ad753a8102450b"},{"other":{},"id":"offer0","url":"https://www.seeedstudio.com/Seeed-XIAO-ESP32C3-p-5431.html","title":"Seeed Studio listing","publisher":null,"kind":"distributor","retrieved_at":"2026-09-24T11:07:26+00:00","field_paths":["offers"],"notes":null}],"assets":[{"other":{},"kind":"datasheet","url":"https://wiki.seeedstudio.com/XIAO_ESP32C3_Getting_Started/","label":"Datasheet","verification":"manufacturer","notes":null},{"other":{},"kind":"image","url":"https://media-cdn.seeedstudio.com/media/catalog/product/cache/7f7f32ef807b8c2c2215b49801c56084/1/-/1-113991054-seeed-studio-xiao-esp32c3-45font_1.jpg","label":"Seeed store photo of XIAO ESP32C3 (113991054)","verification":"manufacturer","notes":"inspected: shows the actual board; saved at work/xiao-esp32c3/images/product.jpg"},{"other":{},"kind":"cad","url":"xiao-esp32c3.step","label":"STEP (generated from datasheet drawing)","verification":"generated","notes":"cad_check passed"}],"offers":[{"other":{"sku":"113991054","price_breaks":[]},"supplier":"Seeed Studio","url":"https://www.seeedstudio.com/Seeed-XIAO-ESP32C3-p-5431.html","currency":"USD","unit_price":4.9,"stock_status":"in_stock","region":"US","minimum_quantity":null,"checked_at":"2026-09-24T11:07:26+00:00","lead_time_days_min":null,"lead_time_days_max":null,"destination":"US","destination_postal_code":null,"notes":null}],"best_for":[{"other":{},"label":"Connected IoT devices and wireless sensor nodes","reason":"On-board radio: Wi-Fi 802.11 b/g/n (2.4 GHz); Bluetooth LE 5.0.","basis":"engineering_inference"},{"other":{},"label":"Space-constrained and embedded builds","reason":"20.955 × 17.78 mm footprint.","basis":"engineering_inference"},{"other":{},"label":"Learning and fast prototyping","reason":"Programs from Arduino, MicroPython.","basis":"engineering_inference"}],"children":[{"other":{},"ref_id":"99bec0e0-dcb0-5a46-81e1-f86f342553dd--mcu","role":"main_processor","count":1,"notes":"Espressif Systems ESP32-C3FH4"},{"other":{},"ref_id":"99bec0e0-dcb0-5a46-81e1-f86f342553dd--ldo","role":"voltage_regulator","count":1,"notes":"Texas Instruments TLV75733PDBVR"}],"spec":{"other":{},"usage":{"other":{},"pinout":[{"id":"1","kind":"gpio","label":"D0","notes":"GPIO, ADC","other":{},"position":"1","reserved":false,"connector":"J2","functions":["Analog","ADC1_CH2","GPIO2","FSPIQ","GPIO matrix (any routable peripheral signal)"],"voltage_v":3.3,"electrical":{"ioh":{"typ":40,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3; chip u1 GPIO2"},"iol":{"typ":28,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3; chip u1 GPIO2"},"vih":{"max":3.6,"min":2.475,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3; chip u1 GPIO2"},"vil":{"max":0.825,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD; chip u1 GPIO2"},"voh":{"min":2.64,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD; chip u1 GPIO2"},"vol":{"max":0.33,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD; chip u1 GPIO2"},"pull_up":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO2"},"pull_down":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO2"},"io_voltage":{"unit":"V","value":3.3,"source":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip"},"input_leakage":{"max":50,"unit":"nA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO2"},"boot_strapping":{"value":true,"source":"ESP32-C3 datasheet p.30 table 30_1","conditions":"GPIO2 floating, GPIO8 floating, GPIO9 weak pull-up by default; sampled at CHIP_EN rising, hold 3 ms; chip u1 GPIO2"},"abs_max_voltage":{"max":3.6,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V; chip u1 GPIO2"},"adc_input_range":{"max":2500,"min":0,"unit":"mV","source":"ESP32-C3 datasheet p.56 table 56_2","conditions":"ADC-capable GPIO0–GPIO5 only; ATTEN3; total error ±35 mV; chip u1 GPIO2"},"input_capacitance":{"typ":2,"unit":"pF","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO2"},"five_volt_tolerant":{"value":false,"source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"inputs limited to VDD + 0.3 V; chip u1 GPIO2"}},"max_drive_ma":28,"boot_strapping":true,"five_volt_tolerant":false},{"id":"2","kind":"gpio","label":"D1","notes":"GPIO, ADC","other":{},"position":"2","reserved":false,"connector":"J2","functions":["Analog","ADC1_CH3","GPIO3","GPIO matrix (any routable peripheral signal)"],"voltage_v":3.3,"electrical":{"ioh":{"typ":40,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3; chip u1 GPIO3"},"iol":{"typ":28,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3; chip u1 GPIO3"},"vih":{"max":3.6,"min":2.475,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3; chip u1 GPIO3"},"vil":{"max":0.825,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD; chip u1 GPIO3"},"voh":{"min":2.64,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD; chip u1 GPIO3"},"vol":{"max":0.33,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD; chip u1 GPIO3"},"pull_up":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO3"},"pull_down":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO3"},"io_voltage":{"unit":"V","value":3.3,"source":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip"},"input_leakage":{"max":50,"unit":"nA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO3"},"abs_max_voltage":{"max":3.6,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V; chip u1 GPIO3"},"adc_input_range":{"max":2500,"min":0,"unit":"mV","source":"ESP32-C3 datasheet p.56 table 56_2","conditions":"ADC-capable GPIO0–GPIO5 only; ATTEN3; total error ±35 mV; chip u1 GPIO3"},"input_capacitance":{"typ":2,"unit":"pF","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO3"},"five_volt_tolerant":{"value":false,"source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"inputs limited to VDD + 0.3 V; chip u1 GPIO3"}},"max_drive_ma":28,"boot_strapping":false,"five_volt_tolerant":false},{"id":"3","kind":"gpio","label":"D2","notes":"GPIO, ADC","other":{},"position":"3","reserved":false,"connector":"J2","functions":["Analog","ADC1_CH4","FSPIHD","MTMS","GPIO4","GPIO matrix (any routable peripheral signal)"],"voltage_v":3.3,"electrical":{"ioh":{"typ":40,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3; chip u1 GPIO4"},"iol":{"typ":28,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3; chip u1 GPIO4"},"vih":{"max":3.6,"min":2.475,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3; chip u1 GPIO4"},"vil":{"max":0.825,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD; chip u1 GPIO4"},"voh":{"min":2.64,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD; chip u1 GPIO4"},"vol":{"max":0.33,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD; chip u1 GPIO4"},"pull_up":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO4"},"pull_down":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO4"},"io_voltage":{"unit":"V","value":3.3,"source":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip"},"input_leakage":{"max":50,"unit":"nA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO4"},"abs_max_voltage":{"max":3.6,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V; chip u1 GPIO4"},"adc_input_range":{"max":2500,"min":0,"unit":"mV","source":"ESP32-C3 datasheet p.56 table 56_2","conditions":"ADC-capable GPIO0–GPIO5 only; ATTEN3; total error ±35 mV; chip u1 GPIO4"},"input_capacitance":{"typ":2,"unit":"pF","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO4"},"five_volt_tolerant":{"value":false,"source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"inputs limited to VDD + 0.3 V; chip u1 GPIO4"}},"max_drive_ma":28,"boot_strapping":false,"five_volt_tolerant":false},{"id":"4","kind":"gpio","label":"D3","notes":"GPIO, ADC","other":{},"position":"4","reserved":false,"connector":"J2","functions":["Analog","ADC2_CH0","FSPIWP","MTDI","GPIO5","GPIO matrix (any routable peripheral signal)"],"voltage_v":3.3,"electrical":{"ioh":{"typ":40,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3; chip u1 GPIO5"},"iol":{"typ":28,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3; chip u1 GPIO5"},"vih":{"max":3.6,"min":2.475,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3; chip u1 GPIO5"},"vil":{"max":0.825,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD; chip u1 GPIO5"},"voh":{"min":2.64,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD; chip u1 GPIO5"},"vol":{"max":0.33,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD; chip u1 GPIO5"},"pull_up":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO5"},"pull_down":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO5"},"io_voltage":{"unit":"V","value":3.3,"source":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip"},"input_leakage":{"max":50,"unit":"nA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO5"},"abs_max_voltage":{"max":3.6,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V; chip u1 GPIO5"},"adc_input_range":{"max":2500,"min":0,"unit":"mV","source":"ESP32-C3 datasheet p.56 table 56_2","conditions":"ADC-capable GPIO0–GPIO5 only; ATTEN3; total error ±35 mV; chip u1 GPIO5"},"input_capacitance":{"typ":2,"unit":"pF","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO5"},"five_volt_tolerant":{"value":false,"source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"inputs limited to VDD + 0.3 V; chip u1 GPIO5"}},"max_drive_ma":28,"boot_strapping":false,"five_volt_tolerant":false},{"id":"5","kind":"gpio","label":"D4","notes":"GPIO, I2C Data","other":{},"position":"5","reserved":false,"connector":"J2","functions":["SDA","FSPICLK","MTCK","GPIO6","GPIO matrix (any routable peripheral signal)"],"voltage_v":3.3,"electrical":{"ioh":{"typ":40,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3; chip u1 GPIO6"},"iol":{"typ":28,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3; chip u1 GPIO6"},"vih":{"max":3.6,"min":2.475,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3; chip u1 GPIO6"},"vil":{"max":0.825,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD; chip u1 GPIO6"},"voh":{"min":2.64,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD; chip u1 GPIO6"},"vol":{"max":0.33,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD; chip u1 GPIO6"},"pull_up":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO6"},"pull_down":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO6"},"io_voltage":{"unit":"V","value":3.3,"source":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip"},"input_leakage":{"max":50,"unit":"nA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO6"},"abs_max_voltage":{"max":3.6,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V; chip u1 GPIO6"},"input_capacitance":{"typ":2,"unit":"pF","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO6"},"five_volt_tolerant":{"value":false,"source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"inputs limited to VDD + 0.3 V; chip u1 GPIO6"}},"max_drive_ma":28,"boot_strapping":false,"five_volt_tolerant":false},{"id":"6","kind":"gpio","label":"D5","notes":"GPIO, I2C Clock","other":{},"position":"6","reserved":false,"connector":"J2","functions":["SCL","FSPID","MTDO","GPIO7","GPIO matrix (any routable peripheral signal)"],"voltage_v":3.3,"electrical":{"ioh":{"typ":40,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3; chip u1 GPIO7"},"iol":{"typ":28,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3; chip u1 GPIO7"},"vih":{"max":3.6,"min":2.475,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3; chip u1 GPIO7"},"vil":{"max":0.825,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD; chip u1 GPIO7"},"voh":{"min":2.64,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD; chip u1 GPIO7"},"vol":{"max":0.33,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD; chip u1 GPIO7"},"pull_up":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO7"},"pull_down":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO7"},"io_voltage":{"unit":"V","value":3.3,"source":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip"},"input_leakage":{"max":50,"unit":"nA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO7"},"abs_max_voltage":{"max":3.6,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V; chip u1 GPIO7"},"input_capacitance":{"typ":2,"unit":"pF","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO7"},"five_volt_tolerant":{"value":false,"source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"inputs limited to VDD + 0.3 V; chip u1 GPIO7"}},"max_drive_ma":28,"boot_strapping":false,"five_volt_tolerant":false},{"id":"7","kind":"gpio","label":"D6","notes":"GPIO, UART Transmit","other":{},"position":"7","reserved":false,"connector":"J2","functions":["TX","U0TXD","GPIO21","GPIO matrix (any routable peripheral signal)"],"voltage_v":3.3,"electrical":{"ioh":{"typ":40,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3; chip u1 GPIO21"},"iol":{"typ":28,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3; chip u1 GPIO21"},"vih":{"max":3.6,"min":2.475,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3; chip u1 GPIO21"},"vil":{"max":0.825,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD; chip u1 GPIO21"},"voh":{"min":2.64,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD; chip u1 GPIO21"},"vol":{"max":0.33,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD; chip u1 GPIO21"},"pull_up":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO21"},"pull_down":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO21"},"io_voltage":{"unit":"V","value":3.3,"source":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip"},"input_leakage":{"max":50,"unit":"nA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO21"},"abs_max_voltage":{"max":3.6,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V; chip u1 GPIO21"},"input_capacitance":{"typ":2,"unit":"pF","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO21"},"series_resistance":{"typ":1,"unit":"Ω","source":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip"},"five_volt_tolerant":{"value":false,"source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"inputs limited to VDD + 0.3 V; chip u1 GPIO21"}},"max_drive_ma":28,"boot_strapping":false,"five_volt_tolerant":false},{"id":"8","kind":"gpio","label":"D7","notes":"GPIO, UART Receive","other":{},"position":"8","reserved":false,"connector":"J1","functions":["RX","U0RXD","GPIO20","GPIO matrix (any routable peripheral signal)"],"voltage_v":3.3,"electrical":{"ioh":{"typ":40,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3; chip u1 GPIO20"},"iol":{"typ":28,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3; chip u1 GPIO20"},"vih":{"max":3.6,"min":2.475,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3; chip u1 GPIO20"},"vil":{"max":0.825,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD; chip u1 GPIO20"},"voh":{"min":2.64,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD; chip u1 GPIO20"},"vol":{"max":0.33,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD; chip u1 GPIO20"},"pull_up":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO20"},"pull_down":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO20"},"io_voltage":{"unit":"V","value":3.3,"source":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip"},"input_leakage":{"max":50,"unit":"nA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO20"},"abs_max_voltage":{"max":3.6,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V; chip u1 GPIO20"},"input_capacitance":{"typ":2,"unit":"pF","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO20"},"five_volt_tolerant":{"value":false,"source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"inputs limited to VDD + 0.3 V; chip u1 GPIO20"}},"max_drive_ma":28,"boot_strapping":false,"five_volt_tolerant":false},{"id":"9","kind":"gpio","label":"D8","notes":"GPIO, SPI Clock","other":{},"position":"9","reserved":false,"connector":"J1","functions":["SCK","GPIO8","GPIO matrix (any routable peripheral signal)"],"voltage_v":3.3,"electrical":{"ioh":{"typ":40,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3; chip u1 GPIO8"},"iol":{"typ":28,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3; chip u1 GPIO8"},"vih":{"max":3.6,"min":2.475,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3; chip u1 GPIO8"},"vil":{"max":0.825,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD; chip u1 GPIO8"},"voh":{"min":2.64,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD; chip u1 GPIO8"},"vol":{"max":0.33,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD; chip u1 GPIO8"},"pull_up":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO8"},"pull_down":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO8"},"io_voltage":{"unit":"V","value":3.3,"source":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip"},"input_leakage":{"max":50,"unit":"nA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO8"},"boot_strapping":{"value":true,"source":"ESP32-C3 datasheet p.30 table 30_1","conditions":"GPIO2 floating, GPIO8 floating, GPIO9 weak pull-up by default; sampled at CHIP_EN rising, hold 3 ms; chip u1 GPIO8"},"abs_max_voltage":{"max":3.6,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V; chip u1 GPIO8"},"input_capacitance":{"typ":2,"unit":"pF","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO8"},"five_volt_tolerant":{"value":false,"source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"inputs limited to VDD + 0.3 V; chip u1 GPIO8"}},"max_drive_ma":28,"boot_strapping":true,"five_volt_tolerant":false},{"id":"10","kind":"gpio","label":"D9","notes":"GPIO, SPI Data","other":{},"position":"10","reserved":false,"connector":"J1","functions":["MISO","BOOT button","GPIO9","GPIO matrix (any routable peripheral signal)"],"voltage_v":3.3,"electrical":{"ioh":{"typ":40,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3; chip u1 GPIO9"},"iol":{"typ":28,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3; chip u1 GPIO9"},"vih":{"max":3.6,"min":2.475,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3; chip u1 GPIO9"},"vil":{"max":0.825,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD; chip u1 GPIO9"},"voh":{"min":2.64,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD; chip u1 GPIO9"},"vol":{"max":0.33,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD; chip u1 GPIO9"},"pull_up":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO9"},"pull_down":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO9"},"io_voltage":{"unit":"V","value":3.3,"source":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip"},"input_leakage":{"max":50,"unit":"nA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO9"},"boot_strapping":{"value":true,"source":"ESP32-C3 datasheet p.30 table 30_1","conditions":"GPIO2 floating, GPIO8 floating, GPIO9 weak pull-up by default; sampled at CHIP_EN rising, hold 3 ms; chip u1 GPIO9"},"abs_max_voltage":{"max":3.6,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V; chip u1 GPIO9"},"pull_up_external":{"typ":10,"unit":"kΩ","source":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip"},"input_capacitance":{"typ":2,"unit":"pF","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO9"},"five_volt_tolerant":{"value":false,"source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"inputs limited to VDD + 0.3 V; chip u1 GPIO9"}},"max_drive_ma":28,"boot_strapping":true,"five_volt_tolerant":false},{"id":"11","kind":"gpio","label":"D10","notes":"GPIO, SPI Data","other":{},"position":"11","reserved":false,"connector":"J1","functions":["MOSI","FSPICS0","GPIO10","GPIO matrix (any routable peripheral signal)"],"voltage_v":3.3,"electrical":{"ioh":{"typ":40,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3; chip u1 GPIO10"},"iol":{"typ":28,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3; chip u1 GPIO10"},"vih":{"max":3.6,"min":2.475,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3; chip u1 GPIO10"},"vil":{"max":0.825,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD; chip u1 GPIO10"},"voh":{"min":2.64,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD; chip u1 GPIO10"},"vol":{"max":0.33,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD; chip u1 GPIO10"},"pull_up":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO10"},"pull_down":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO10"},"io_voltage":{"unit":"V","value":3.3,"source":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip"},"input_leakage":{"max":50,"unit":"nA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO10"},"abs_max_voltage":{"max":3.6,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V; chip u1 GPIO10"},"input_capacitance":{"typ":2,"unit":"pF","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO10"},"five_volt_tolerant":{"value":false,"source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"inputs limited to VDD + 0.3 V; chip u1 GPIO10"}},"max_drive_ma":28,"boot_strapping":false,"five_volt_tolerant":false},{"id":"12","kind":"power_out","label":"3V3","notes":"3V3_OUT regulated output","other":{},"position":"12","reserved":false,"connector":"J1","functions":["power_out"],"voltage_v":3.3,"electrical":{"output_current":{"max":500,"unit":"mA","source":"p.2 table 2_1","conditions":"test: BAT pin input @ 3.8 V (spec table); wiki text says 700 mA"},"output_voltage":{"typ":3.3,"unit":"V","source":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","conditions":"TLV75733P LDO"},"output_current_2":{"max":700,"unit":"mA","source":"p.4","conditions":"power-pins text — disagrees with the 500 mA spec-table value"}}},{"id":"13","kind":"ground","label":"GND","other":{},"position":"13","reserved":false,"connector":"J1","functions":["ground"],"voltage_v":0,"electrical":{}},{"id":"14","kind":"power_in","label":"5V","notes":"VBUS; 5 V from USB, may be used as input through a diode","other":{},"position":"14","reserved":false,"connector":"J1","functions":["power_in"],"voltage_v":5,"electrical":{"input_voltage":{"typ":5,"unit":"V","source":"p.2 table 2_1","conditions":"USB/5V pin; external supply through a diode"},"input_current_limit":{"max":500,"unit":"mA","source":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","conditions":"F1 6 V 500 mA fuse on VUSB"}}},{"id":"TP1","kind":"ground","label":"TP1","notes":"test point on net GND","other":{},"position":"TP1","reserved":false,"connector":"bottom_pads","functions":["ground"],"voltage_v":0,"electrical":{}},{"id":"TP2","kind":"gpio","label":"TP2","notes":"test point on net D2","other":{},"position":"TP2","reserved":false,"connector":"bottom_pads","functions":["MTMS","GPIO4","FSPIHD","ADC1_CH4","GPIO matrix (any routable peripheral signal)"],"voltage_v":3.3,"electrical":{"ioh":{"typ":40,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3; chip u1 GPIO4"},"iol":{"typ":28,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3; chip u1 GPIO4"},"vih":{"max":3.6,"min":2.475,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3; chip u1 GPIO4"},"vil":{"max":0.825,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD; chip u1 GPIO4"},"voh":{"min":2.64,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD; chip u1 GPIO4"},"vol":{"max":0.33,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD; chip u1 GPIO4"},"pull_up":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO4"},"pull_down":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO4"},"io_voltage":{"unit":"V","value":3.3,"source":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip"},"input_leakage":{"max":50,"unit":"nA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO4"},"abs_max_voltage":{"max":3.6,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V; chip u1 GPIO4"},"adc_input_range":{"max":2500,"min":0,"unit":"mV","source":"ESP32-C3 datasheet p.56 table 56_2","conditions":"ADC-capable GPIO0–GPIO5 only; ATTEN3; total error ±35 mV; chip u1 GPIO4"},"input_capacitance":{"typ":2,"unit":"pF","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO4"},"five_volt_tolerant":{"value":false,"source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"inputs limited to VDD + 0.3 V; chip u1 GPIO4"}},"max_drive_ma":28,"boot_strapping":false,"five_volt_tolerant":false},{"id":"TP3","kind":"gpio","label":"TP3","notes":"test point on net D3","other":{},"position":"TP3","reserved":false,"connector":"bottom_pads","functions":["MTDI","GPIO5","FSPIWP","ADC2_CH0","GPIO matrix (any routable peripheral signal)"],"voltage_v":3.3,"electrical":{"ioh":{"typ":40,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3; chip u1 GPIO5"},"iol":{"typ":28,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3; chip u1 GPIO5"},"vih":{"max":3.6,"min":2.475,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3; chip u1 GPIO5"},"vil":{"max":0.825,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD; chip u1 GPIO5"},"voh":{"min":2.64,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD; chip u1 GPIO5"},"vol":{"max":0.33,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD; chip u1 GPIO5"},"pull_up":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO5"},"pull_down":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO5"},"io_voltage":{"unit":"V","value":3.3,"source":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip"},"input_leakage":{"max":50,"unit":"nA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO5"},"abs_max_voltage":{"max":3.6,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V; chip u1 GPIO5"},"adc_input_range":{"max":2500,"min":0,"unit":"mV","source":"ESP32-C3 datasheet p.56 table 56_2","conditions":"ADC-capable GPIO0–GPIO5 only; ATTEN3; total error ±35 mV; chip u1 GPIO5"},"input_capacitance":{"typ":2,"unit":"pF","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO5"},"five_volt_tolerant":{"value":false,"source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"inputs limited to VDD + 0.3 V; chip u1 GPIO5"}},"max_drive_ma":28,"boot_strapping":false,"five_volt_tolerant":false},{"id":"TP4","kind":"gpio","label":"TP4","notes":"test point on net D4","other":{},"position":"TP4","reserved":false,"connector":"bottom_pads","functions":["MTCK","GPIO6","FSPICLK","GPIO matrix (any routable peripheral signal)"],"voltage_v":3.3,"electrical":{"ioh":{"typ":40,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3; chip u1 GPIO6"},"iol":{"typ":28,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3; chip u1 GPIO6"},"vih":{"max":3.6,"min":2.475,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3; chip u1 GPIO6"},"vil":{"max":0.825,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD; chip u1 GPIO6"},"voh":{"min":2.64,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD; chip u1 GPIO6"},"vol":{"max":0.33,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD; chip u1 GPIO6"},"pull_up":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO6"},"pull_down":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO6"},"io_voltage":{"unit":"V","value":3.3,"source":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip"},"input_leakage":{"max":50,"unit":"nA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO6"},"abs_max_voltage":{"max":3.6,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V; chip u1 GPIO6"},"input_capacitance":{"typ":2,"unit":"pF","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO6"},"five_volt_tolerant":{"value":false,"source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"inputs limited to VDD + 0.3 V; chip u1 GPIO6"}},"max_drive_ma":28,"boot_strapping":false,"five_volt_tolerant":false},{"id":"TP5","kind":"gpio","label":"TP5","notes":"test point on net D5","other":{},"position":"TP5","reserved":false,"connector":"bottom_pads","functions":["MTDO","GPIO7","FSPID","GPIO matrix (any routable peripheral signal)"],"voltage_v":3.3,"electrical":{"ioh":{"typ":40,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3; chip u1 GPIO7"},"iol":{"typ":28,"unit":"mA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3; chip u1 GPIO7"},"vih":{"max":3.6,"min":2.475,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3; chip u1 GPIO7"},"vil":{"max":0.825,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD; chip u1 GPIO7"},"voh":{"min":2.64,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD; chip u1 GPIO7"},"vol":{"max":0.33,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD; chip u1 GPIO7"},"pull_up":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO7"},"pull_down":{"typ":45,"unit":"kΩ","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO7"},"io_voltage":{"unit":"V","value":3.3,"source":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip"},"input_leakage":{"max":50,"unit":"nA","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO7"},"abs_max_voltage":{"max":3.6,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V; chip u1 GPIO7"},"input_capacitance":{"typ":2,"unit":"pF","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; chip u1 GPIO7"},"five_volt_tolerant":{"value":false,"source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"inputs limited to VDD + 0.3 V; chip u1 GPIO7"}},"max_drive_ma":28,"boot_strapping":false,"five_volt_tolerant":false},{"id":"TP6","kind":"control","label":"TP6","notes":"test point on net EN","other":{},"position":"TP6","reserved":false,"connector":"bottom_pads","functions":["en"],"electrical":{"vih":{"max":3.6,"min":2.475,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3; chip u1 CHIP_EN"},"vil":{"max":0.825,"min":-0.3,"unit":"V","source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD; chip u1 CHIP_EN"},"pull_up_external":{"typ":10,"unit":"kΩ","source":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","conditions":"with C5 100 nF RC reset; RESET button to GND"},"five_volt_tolerant":{"value":false,"source":"ESP32-C3 datasheet p.55 table 55_2","conditions":"CHIP_EN ≤ VDD + 0.3 V; chip u1 CHIP_EN"}},"boot_strapping":false,"five_volt_tolerant":false},{"id":"BAT+","kind":"power_in","label":"BAT+","notes":"battery positive (3.7 V Li-ion)","other":{},"position":"BAT+","reserved":false,"connector":"bottom_pads","functions":["power_in"],"voltage_v":3.7,"electrical":{"input_voltage":{"typ":3.7,"unit":"V","source":"p.2 table 2_1","conditions":"3.7 V lithium battery"},"charge_current":{"typ":380,"unit":"mA","source":"p.2 table 2_1","conditions":"fast; trickle 40 mA"}}},{"id":"GND_PAD","kind":"ground","label":"GND","notes":"bottom ground pad (battery negative)","other":{},"position":"GND pad","reserved":false,"connector":"bottom_pads","functions":["ground"],"voltage_v":0,"electrical":{}}],"derived":{},"connectors":[{"id":"usb","kind":"USB Type-C (UBF31-0171)","other":{}},{"id":"edge","kind":"2 × 7 castellated half-hole pads, 2.54 mm","other":{},"pitch_mm":2.54,"pin_count":14},{"id":"antenna","kind":"U.FL (U.FL-R-SMT-1) external antenna","other":{}},{"id":"battery","kind":"BAT+ / GND solder pads (bottom)","other":{}}],"pin_mappings":[{"other":{},"signal":"GPIO2","child_ref":"99bec0e0-dcb0-5a46-81e1-f86f342553dd--mcu","route_type":"direct","board_pin_id":"1","child_pin_id":"GPIO2"},{"other":{},"signal":"GPIO3","child_ref":"99bec0e0-dcb0-5a46-81e1-f86f342553dd--mcu","route_type":"direct","board_pin_id":"2","child_pin_id":"GPIO3"},{"other":{},"signal":"GPIO4","child_ref":"99bec0e0-dcb0-5a46-81e1-f86f342553dd--mcu","route_type":"direct","board_pin_id":"3","child_pin_id":"GPIO4"},{"other":{},"signal":"GPIO5","child_ref":"99bec0e0-dcb0-5a46-81e1-f86f342553dd--mcu","route_type":"direct","board_pin_id":"4","child_pin_id":"GPIO5"},{"other":{},"signal":"GPIO6","child_ref":"99bec0e0-dcb0-5a46-81e1-f86f342553dd--mcu","route_type":"direct","board_pin_id":"5","child_pin_id":"GPIO6"},{"other":{},"signal":"GPIO7","child_ref":"99bec0e0-dcb0-5a46-81e1-f86f342553dd--mcu","route_type":"direct","board_pin_id":"6","child_pin_id":"GPIO7"},{"other":{},"signal":"GPIO21","child_ref":"99bec0e0-dcb0-5a46-81e1-f86f342553dd--mcu","route_type":"direct","board_pin_id":"7","child_pin_id":"GPIO21"},{"other":{},"signal":"GPIO20","child_ref":"99bec0e0-dcb0-5a46-81e1-f86f342553dd--mcu","route_type":"direct","board_pin_id":"8","child_pin_id":"GPIO20"},{"other":{},"signal":"GPIO8","child_ref":"99bec0e0-dcb0-5a46-81e1-f86f342553dd--mcu","route_type":"direct","board_pin_id":"9","child_pin_id":"GPIO8"},{"other":{},"signal":"GPIO9","child_ref":"99bec0e0-dcb0-5a46-81e1-f86f342553dd--mcu","route_type":"direct","board_pin_id":"10","child_pin_id":"GPIO9"},{"other":{},"signal":"GPIO10","child_ref":"99bec0e0-dcb0-5a46-81e1-f86f342553dd--mcu","route_type":"direct","board_pin_id":"11","child_pin_id":"GPIO10"},{"other":{},"signal":"GPIO4","child_ref":"99bec0e0-dcb0-5a46-81e1-f86f342553dd--mcu","route_type":"direct","board_pin_id":"TP2","child_pin_id":"GPIO4"},{"other":{},"signal":"GPIO5","child_ref":"99bec0e0-dcb0-5a46-81e1-f86f342553dd--mcu","route_type":"direct","board_pin_id":"TP3","child_pin_id":"GPIO5"},{"other":{},"signal":"GPIO6","child_ref":"99bec0e0-dcb0-5a46-81e1-f86f342553dd--mcu","route_type":"direct","board_pin_id":"TP4","child_pin_id":"GPIO6"},{"other":{},"signal":"GPIO7","child_ref":"99bec0e0-dcb0-5a46-81e1-f86f342553dd--mcu","route_type":"direct","board_pin_id":"TP5","child_pin_id":"GPIO7"},{"other":{},"signal":"CHIP_EN","child_ref":"99bec0e0-dcb0-5a46-81e1-f86f342553dd--mcu","route_type":"direct","board_pin_id":"TP6","child_pin_id":"CHIP_EN"}],"requirements":{"other":{},"data_inputs":["USB-C"],"power_inputs":[{"name":"5V","notes":"VBUS; 5 V from USB, may be used as input through a diode","other":{}},{"name":"BAT+","notes":"battery positive (3.7 V Li-ion)","other":{}}]},"pinout_complete":true},"geometry":{"cad":{"bbox":{"width_mm":17.78,"height_mm":4.8,"length_mm":21.25},"features":[],"mesh_path":"xiao-esp32c3.stl","step_path":"xiao-esp32c3.step","assumptions":["feature USB-C receptacle: USB-C footprint size/height from the UBF31-0171 class receptacle (8.94 × 7.35 × 3.2 mm); position read from the pinout image, overhang ~1.3 mm — not dimensioned in the DXF"],"verification":"generated","envelope_complete":false},"other":{},"derived":{},"dimensions":{"other":{},"width_mm":17.78,"height_mm":1.6,"length_mm":20.955},"feature_boxes":[{"name":"USB-C receptacle","x_mm":13.9,"y_mm":4.8,"other":{},"width_mm":8.94,"height_mm":3.2,"length_mm":7.35}],"mounting_holes":[]},"provides":{"other":{},"memory":{"other":{},"sram_kb":400,"flash_kb":4096},"derived":{},"features":["Wi-Fi 802.11 b/g/n and Bluetooth LE 5.0 / Mesh","Li-ion battery charging (380 mA fast)","RESET and BOOT buttons","External antenna via U.FL (antenna included)","Single-sided, surface-mountable (castellated)","Charge LED (red)"],"wireless":["Wi-Fi 802.11 b/g/n (2.4 GHz)","Bluetooth LE 5.0","Bluetooth Mesh"],"gpio_count":11,"capabilities":[{"notes":"count stated in datasheet (adc_channels)","other":{},"protocol":"adc","available":true,"board_pin_ids":["1","2","3","4","TP2","TP3"],"instance_count":4},{"other":{},"protocol":"gpio","available":true,"board_pin_ids":["1","2","3","4","5","6","7","8","9","10","11","TP2","TP3","TP4","TP5"]},{"notes":"count stated in datasheet (spi_count)","other":{},"protocol":"spi","available":true,"board_pin_ids":["1","3","4","5","6","9","10","11","TP2","TP3","TP4","TP5"],"instance_count":1},{"other":{},"protocol":"gpio_matrix","available":true,"board_pin_ids":["1","2","3","4","5","6","7","8","9","10","11","TP2","TP3","TP4","TP5"]},{"other":{},"protocol":"jtag","available":true,"board_pin_ids":["3","4","5","6","TP2","TP3","TP4","TP5"]},{"notes":"count stated in datasheet (i2c_count)","other":{},"protocol":"i2c","available":true,"board_pin_ids":["5","6"],"instance_count":1},{"notes":"count stated in datasheet (uart_count)","other":{},"protocol":"uart","available":true,"board_pin_ids":["7","8"],"instance_count":1},{"other":{},"protocol":"control","available":true,"board_pin_ids":["10"]},{"notes":"USB Type-C (native USB Serial/JTAG of the ESP32-C3)","other":{},"protocol":"usb","available":true,"board_pin_ids":[],"instance_count":1}],"software_frameworks":["Arduino (esp32 core)","MicroPython"]},"compliance":{"other":{},"derived":{},"certifications":["FCC (FCC ID Z4T-XIAOESP32C3)","CE","TELEC (R 204-B00704)"]},"constraints":{"other":{},"derived":{},"thermal":{"other":{},"operating_temp_max_c":85,"operating_temp_min_c":-40},"electrical":{"other":{},"io_voltage_v":3.3,"max_current_ma":75,"logic_high_min_v":2.475,"pin_drive_max_ma":28,"supply_voltage_max_v":5,"supply_voltage_min_v":3.7,"supply_voltage_nominal_v":5}}},"other":null,"source_type":"pdf","source_ref":"https://wiki.seeedstudio.com/XIAO_ESP32C3_Getting_Started/","datasheet":{"cad":{"bbox":{"max":[21.25,17.78,4.8],"min":[0,0,0],"width_mm":17.78,"height_mm":4.8,"length_mm":21.25},"check":{"failed":[],"passed":true},"expected":[{"what":"pcb","width":17.78,"length":20.955,"thickness":1.6}],"archetype":"pcb_board","mesh_path":"/Users/sumeet/Documents/Xirkit Parent/XirkitOnboard/work/xiao-esp32c3/07_cad/part.stl","step_path":"/Users/sumeet/Documents/Xirkit Parent/XirkitOnboard/work/xiao-esp32c3/07_cad/part.step","views_png":"/Users/sumeet/Documents/Xirkit Parent/XirkitOnboard/work/xiao-esp32c3/07_cad/views.png","export_stl":"xiao-esp32c3.stl","assumptions":["feature USB-C receptacle: USB-C footprint size/height from the UBF31-0171 class receptacle (8.94 × 7.35 × 3.2 mm); position read from the pinout image, overhang ~1.3 mm — not dimensioned in the DXF"],"export_step":"xiao-esp32c3.step","envelope_complete":false},"chips":[{"id":"u1","mpn":"ESP32-C3FH4","src":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"U4 ESP32-C3FH4 QFN32G-0.5-5X5MM","method":"table"},"role":"main_processor","manufacturer":"Espressif Systems"},{"id":"ldo","mpn":"TLV75733PDBVR","src":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"U2 TLV75733PDBVR","method":"table"},"role":"voltage_regulator","manufacturer":"Texas Instruments"}],"fields":{"usb":{"src":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"USB0 UBF31-0171 DP/DM → R8 22R → ESP_USB_DP","method":"table"},"unit":null,"value":"USB Type-C (native USB Serial/JTAG of the ESP32-C3)"},"sram_kb":{"src":{"page":2,"quote":"| On-chip Memory | 400KB SRAM & 4MB Flash |","method":"table","table_id":"2_1"},"orig":{"unit":"KB","value":400},"unit":"KiB","value":400},"flash_kb":{"src":{"page":2,"quote":"| On-chip Memory | 400KB SRAM & 4MB Flash |","method":"table","table_id":"2_1"},"orig":{"unit":"MB","value":4},"unit":"KiB","value":4096},"mcu_core":{"src":{"page":2,"quote":"| Processor | ESP32-C3 SoC RISC-V single-core 32-bit chip processor with a four-stage pipeline that operates at up to 160 MHz |","method":"table","table_id":"2_1"},"unit":null,"value":"32-bit RISC-V single-core, 4-stage pipeline"},"wireless":{"src":{"page":2,"quote":"| Wireless | Complete 2.4GHz Wi-Fi subsystem Bluetooth Low Energy 5.0/ Bluetooth Mesh |","method":"table","table_id":"2_1"},"unit":null,"value":["Wi-Fi 802.11 b/g/n (2.4 GHz)","Bluetooth LE 5.0","Bluetooth Mesh"]},"clock_mhz":{"src":{"page":2,"quote":"| Processor | ESP32-C3 SoC RISC-V single-core 32-bit chip processor with a four-stage pipeline that operates at up to 160 MHz |","method":"table","table_id":"2_1"},"orig":{"unit":"MHz","value":160},"unit":"Hz","value":160000000},"i2c_count":{"src":{"page":2,"quote":"| Interface | 1x UART 1x IIC 1x SPI 11x GPIO(PWM) 4x ADC 1x Reset button 1x Boot button |","method":"table","table_id":"2_1"},"unit":null,"value":1},"spi_count":{"src":{"page":2,"quote":"| Interface | 1x UART 1x IIC 1x SPI 11x GPIO(PWM) 4x ADC 1x Reset button 1x Boot button |","method":"table","table_id":"2_1"},"unit":null,"value":1},"gpio_count":{"src":{"page":2,"quote":"| Interface | 1x UART 1x IIC 1x SPI 11x GPIO(PWM) 4x ADC 1x Reset button 1x Boot button |","method":"table","table_id":"2_1"},"unit":null,"value":11},"io_voltage":{"src":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"VCC_3V3 supplies U4","method":"derived"},"unit":"V","value":3.3},"uart_count":{"src":{"page":2,"quote":"| Interface | 1x UART 1x IIC 1x SPI 11x GPIO(PWM) 4x ADC 1x Reset button 1x Boot button |","method":"table","table_id":"2_1"},"unit":null,"value":1},"data_inputs":{"src":{"page":5,"quote":"- Step 1. Connect XIAO ESP32C3 to your computer via a USB Type-C cable.","method":"text"},"unit":null,"value":["USB-C"]},"adc_channels":{"src":{"page":2,"quote":"| Interface | 1x UART 1x IIC 1x SPI 11x GPIO(PWM) 4x ADC 1x Reset button 1x Boot button |","method":"table","table_id":"2_1"},"unit":null,"value":4},"pwm_channels":{"src":{"page":2,"quote":"| Interface | 1x UART 1x IIC 1x SPI 11x GPIO(PWM) 4x ADC 1x Reset button 1x Boot button |","method":"table","table_id":"2_1"},"unit":null,"value":11},"regulator_output":{"src":{"page":2,"quote":"| Power(Typ.) | Max 3.3V Output Current: 500mA Test Condition: BAT Pin Input @ 3.8V Source Capability: 3A Charging current: 380mA(Fast) / 40mA(Trickle) Input voltage (VIN): 5V Input voltage (BAT): 3.7V |","method":"table","table_id":"2_1"},"unit":null,"value":"TLV75733P 3.3 V LDO; 3V3 pin 500 mA (spec) / 700 mA (text)"},"software_frameworks":{"src":{"page":5,"quote":"- Step 3. Add ESP32 board package to your Arduino IDE","method":"text"},"unit":null,"value":["Arduino (esp32 core)","MicroPython"]}},"groups":{"io":["1","2","3","4","5","6","7","8","9","10","11","TP2","TP3","TP4","TP5"],"all":["1","2","3","4","5","6","7","8","9","10","11","12","13","14","TP1","TP2","TP3","TP4","TP5","TP6","BAT+","GND_PAD"]},"source":{"url":"https://wiki.seeedstudio.com/XIAO_ESP32C3_Getting_Started/","pages":15,"sha256":"eded10e78cac5ef54a27f6156f692eaea626120147aad80ea3ad753a8102450b","onboarded_at":"2026-09-25T10:47:30+00:00"},"coverage":{"pct":100,"score":"42/42","passed":true,"explained_nulls":["holes","component_heights","weight","lifecycle"]},"entities":[{"id":"1","attrs":{"net":"D0","pad":"1","kind":"gpio","label":"D0","number":6,"chip_pin":"GPIO2","position":"1","connector":"J2","designator":"1","castellated":true,"description":"GPIO, ADC","power_domain":"VDD3P3_RTC"},"sources":[{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 1 net D0","method":"table","fragment":"entities_edge.json"},{"page":4,"quote":"| D0 | Analog | GPIO2 | ADC1_CH2 | GPIO, ADC |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"}],"attr_src":{"net":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 1 net D0","method":"table","fragment":"entities_edge.json"},"pad":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 1 net D0","method":"table","fragment":"entities_edge.json"},"kind":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 1 net D0","method":"table","fragment":"entities_edge.json"},"label":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 1 net D0","method":"table","fragment":"entities_edge.json"},"number":{"via":"chip u1 GPIO2","method":"chip_link"},"chip_pin":{"page":4,"quote":"| D0 | Analog | GPIO2 | ADC1_CH2 | GPIO, ADC |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"},"position":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 1 net D0","method":"table","fragment":"entities_edge.json"},"connector":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 1 net D0","method":"table","fragment":"entities_edge.json"},"designator":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 1 net D0","method":"table","fragment":"entities_edge.json"},"castellated":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 1 net D0","method":"table","fragment":"entities_edge.json"},"description":{"page":4,"quote":"| D0 | Analog | GPIO2 | ADC1_CH2 | GPIO, ADC |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"},"power_domain":{"via":"chip u1 GPIO2","method":"chip_link"}},"chip_pin":{"pin":"GPIO2","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":4,"quote":"| D0 | Analog | GPIO2 | ADC1_CH2 |","method":"table","fragment":"functions_pinmap.json","table_id":"4_1"},"signal":"Analog","category":"adc"},{"src":{"page":4,"quote":"| D0 | Analog | GPIO2 | ADC1_CH2 |","method":"table","fragment":"functions_pinmap.json","table_id":"4_1"},"signal":"ADC1_CH2","category":"adc"},{"alt":"F0","src":{"page":20,"quote":"| 6 | GPIO2 |  | GPIO2 | … | GPIO2 | … | FSPIQ |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO2","signal":"GPIO2","category":"gpio"},{"alt":"F2","src":{"page":20,"quote":"| 6 | GPIO2 |  | GPIO2 | … | GPIO2 | … | FSPIQ |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO2","signal":"FSPIQ","category":"spi"},{"src":{"page":20,"quote":"| 6 | GPIO2 |  | GPIO2 | … | GPIO2 | … | FSPIQ |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO2","signal":"GPIO matrix (any routable peripheral signal)","category":"gpio_matrix"}],"electrical":{"ioh":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOH | High-level source current (VDD 1 = 3.3 V, VOH >= 2.64 V, PAD_DRIVER = 3) | — | 40 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.04,"via":"chip u1 GPIO2","orig":{"typ":40,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"High-level source current","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3"}],"iol":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOL | Low-level sink current (VDD 1 = 3.3 V, VOL = 0.495 V, PAD_DRIVER = 3) | — | 28 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.028,"via":"chip u1 GPIO2","orig":{"typ":28,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Low-level sink current","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3"}],"vih":[{"max":3.6,"min":2.475,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO2","unit":"V","symbol":"VIH","category":"characteristic","parameter":"High-level input voltage","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3"}],"vil":[{"max":0.825,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIL | Low-level input voltage | –0.3 | — | 1 0.25 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO2","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Low-level input voltage","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD"}],"voh":[{"min":2.64,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOH | High-level output voltage | 1 0.8 × VDD | — | — | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO2","unit":"V","symbol":"VOH","category":"characteristic","parameter":"High-level output voltage","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD"}],"vol":[{"max":0.33,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOL | Low-level output voltage | — | — | 1 0.1 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO2","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Low-level output voltage","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD"}],"pull_up":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PU | Internal weak pull-up resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO2","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Internal weak pull-up resistor","conditions":"VDD=3.3V; 25 °C"}],"pull_down":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PD | Internal weak pull-down resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO2","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Internal weak pull-down resistor","conditions":"VDD=3.3V; 25 °C"}],"io_voltage":[{"src":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"U4 pins 11/17/31/32 net VCC_3V3","method":"derived","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level (ESP32-C3 VDD3P3 = VCC_3V3)"}],"input_leakage":[{"max":5e-8,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IIH | High-level input current | — | — | 50 | nA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO2","orig":{"max":50,"unit":"nA"},"unit":"A","symbol":"IIH/IIL","category":"characteristic","parameter":"High/low-level input current","conditions":"VDD=3.3V; 25 °C"}],"boot_strapping":[{"src":{"doc":"ESP32-C3 datasheet","page":30,"quote":"| Strapping Pin | Default Configuration | Bit Value | GPIO2 | Floating | GPIO8 | Floating | GPIO9 | Weak pull-up | 1 |","method":"derived","fragment":"ratings_pins.json","table_id":"30_1"},"via":"chip u1 GPIO2","value":true,"category":"characteristic","parameter":"Strapping pin (boot mode selection)","conditions":"GPIO2 floating, GPIO8 floating, GPIO9 weak pull-up by default; sampled at CHIP_EN rising, hold 3 ms"}],"abs_max_voltage":[{"max":3.6,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | … | VDD 1 + 0.3 | V |; | Input power pins 1 | Allowed input voltage | –0.3 | 3.6 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO2","unit":"V","category":"absolute_max","parameter":"IO input voltage (from VIH max)","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V"}],"adc_input_range":[{"max":2.5,"min":0,"src":{"doc":"ESP32-C3 datasheet","page":56,"quote":"|  | ATTEN3, effective measurement range of 0 ~ 2500 | –35 | 35 | mV |","method":"table","fragment":"ratings_pins.json","table_id":"56_2"},"via":"chip u1 GPIO2","orig":{"max":2500,"min":0,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"ADC effective measurement range (ATTEN3)","conditions":"ADC-capable GPIO0–GPIO5 only; ATTEN3; total error ±35 mV"}],"input_capacitance":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| CIN | Pin capacitance | — | 2 | — | pF |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0,"via":"chip u1 GPIO2","orig":{"typ":2,"unit":"pF"},"unit":"F","symbol":"CIN","category":"characteristic","parameter":"Pin capacitance","conditions":"VDD=3.3V; 25 °C"}],"five_volt_tolerant":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO2","value":false,"category":"absolute_max","parameter":"5 V tolerant","conditions":"inputs limited to VDD + 0.3 V"}]},"entity_type":"pin"},{"id":"2","attrs":{"net":"D1","pad":"2","kind":"gpio","label":"D1","number":8,"chip_pin":"GPIO3","position":"2","connector":"J2","designator":"2","castellated":true,"description":"GPIO, ADC","power_domain":"VDD3P3_RTC"},"sources":[{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 2 net D1","method":"table","fragment":"entities_edge.json"},{"page":4,"quote":"| D1 | Analog | GPIO3 | ADC1_CH3 | GPIO, ADC |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"}],"attr_src":{"net":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 2 net D1","method":"table","fragment":"entities_edge.json"},"pad":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 2 net D1","method":"table","fragment":"entities_edge.json"},"kind":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 2 net D1","method":"table","fragment":"entities_edge.json"},"label":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 2 net D1","method":"table","fragment":"entities_edge.json"},"number":{"via":"chip u1 GPIO3","method":"chip_link"},"chip_pin":{"page":4,"quote":"| D1 | Analog | GPIO3 | ADC1_CH3 | GPIO, ADC |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"},"position":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 2 net D1","method":"table","fragment":"entities_edge.json"},"connector":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 2 net D1","method":"table","fragment":"entities_edge.json"},"designator":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 2 net D1","method":"table","fragment":"entities_edge.json"},"castellated":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 2 net D1","method":"table","fragment":"entities_edge.json"},"description":{"page":4,"quote":"| D1 | Analog | GPIO3 | ADC1_CH3 | GPIO, ADC |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"},"power_domain":{"via":"chip u1 GPIO3","method":"chip_link"}},"chip_pin":{"pin":"GPIO3","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":4,"quote":"| D1 | Analog | GPIO3 | ADC1_CH3 | GPIO, ADC |","method":"table","fragment":"functions_pinmap.json","table_id":"4_1"},"signal":"Analog","category":"adc"},{"src":{"page":4,"quote":"| D1 | Analog | GPIO3 | ADC1_CH3 | GPIO, ADC |","method":"table","fragment":"functions_pinmap.json","table_id":"4_1"},"signal":"ADC1_CH3","category":"adc"},{"alt":"F0","src":{"page":20,"quote":"| 8 | GPIO3 |  | GPIO3 | … | GPIO3 | … |  |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO3","signal":"GPIO3","category":"gpio"},{"src":{"page":20,"quote":"| 8 | GPIO3 |  | GPIO3 | … | GPIO3 | … |  |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO3","signal":"GPIO matrix (any routable peripheral signal)","category":"gpio_matrix"}],"electrical":{"ioh":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOH | High-level source current (VDD 1 = 3.3 V, VOH >= 2.64 V, PAD_DRIVER = 3) | — | 40 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.04,"via":"chip u1 GPIO3","orig":{"typ":40,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"High-level source current","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3"}],"iol":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOL | Low-level sink current (VDD 1 = 3.3 V, VOL = 0.495 V, PAD_DRIVER = 3) | — | 28 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.028,"via":"chip u1 GPIO3","orig":{"typ":28,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Low-level sink current","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3"}],"vih":[{"max":3.6,"min":2.475,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO3","unit":"V","symbol":"VIH","category":"characteristic","parameter":"High-level input voltage","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3"}],"vil":[{"max":0.825,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIL | Low-level input voltage | –0.3 | — | 1 0.25 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO3","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Low-level input voltage","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD"}],"voh":[{"min":2.64,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOH | High-level output voltage | 1 0.8 × VDD | — | — | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO3","unit":"V","symbol":"VOH","category":"characteristic","parameter":"High-level output voltage","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD"}],"vol":[{"max":0.33,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOL | Low-level output voltage | — | — | 1 0.1 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO3","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Low-level output voltage","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD"}],"pull_up":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PU | Internal weak pull-up resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO3","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Internal weak pull-up resistor","conditions":"VDD=3.3V; 25 °C"}],"pull_down":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PD | Internal weak pull-down resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO3","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Internal weak pull-down resistor","conditions":"VDD=3.3V; 25 °C"}],"io_voltage":[{"src":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"U4 pins 11/17/31/32 net VCC_3V3","method":"derived","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level (ESP32-C3 VDD3P3 = VCC_3V3)"}],"input_leakage":[{"max":5e-8,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IIH | High-level input current | — | — | 50 | nA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO3","orig":{"max":50,"unit":"nA"},"unit":"A","symbol":"IIH/IIL","category":"characteristic","parameter":"High/low-level input current","conditions":"VDD=3.3V; 25 °C"}],"abs_max_voltage":[{"max":3.6,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | … | VDD 1 + 0.3 | V |; | Input power pins 1 | Allowed input voltage | –0.3 | 3.6 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO3","unit":"V","category":"absolute_max","parameter":"IO input voltage (from VIH max)","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V"}],"adc_input_range":[{"max":2.5,"min":0,"src":{"doc":"ESP32-C3 datasheet","page":56,"quote":"|  | ATTEN3, effective measurement range of 0 ~ 2500 | –35 | 35 | mV |","method":"table","fragment":"ratings_pins.json","table_id":"56_2"},"via":"chip u1 GPIO3","orig":{"max":2500,"min":0,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"ADC effective measurement range (ATTEN3)","conditions":"ADC-capable GPIO0–GPIO5 only; ATTEN3; total error ±35 mV"}],"input_capacitance":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| CIN | Pin capacitance | — | 2 | — | pF |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0,"via":"chip u1 GPIO3","orig":{"typ":2,"unit":"pF"},"unit":"F","symbol":"CIN","category":"characteristic","parameter":"Pin capacitance","conditions":"VDD=3.3V; 25 °C"}],"five_volt_tolerant":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO3","value":false,"category":"absolute_max","parameter":"5 V tolerant","conditions":"inputs limited to VDD + 0.3 V"}]},"entity_type":"pin"},{"id":"3","attrs":{"net":"D2","pad":"3","kind":"gpio","label":"D2","number":9,"chip_pin":"GPIO4","position":"3","connector":"J2","designator":"3","castellated":true,"description":"GPIO, ADC","power_domain":"VDD3P3_RTC"},"sources":[{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 3 net D2","method":"table","fragment":"entities_edge.json"},{"page":4,"quote":"| D2 | Analog | GPIO4 | ADC1_CH4, FSPIHD, MTMS | GPIO, ADC |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"}],"attr_src":{"net":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 3 net D2","method":"table","fragment":"entities_edge.json"},"pad":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 3 net D2","method":"table","fragment":"entities_edge.json"},"kind":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 3 net D2","method":"table","fragment":"entities_edge.json"},"label":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 3 net D2","method":"table","fragment":"entities_edge.json"},"number":{"via":"chip u1 GPIO4","method":"chip_link"},"chip_pin":{"page":4,"quote":"| D2 | Analog | GPIO4 | ADC1_CH4, FSPIHD, MTMS | GPIO, ADC |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"},"position":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 3 net D2","method":"table","fragment":"entities_edge.json"},"connector":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 3 net D2","method":"table","fragment":"entities_edge.json"},"designator":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 3 net D2","method":"table","fragment":"entities_edge.json"},"castellated":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 3 net D2","method":"table","fragment":"entities_edge.json"},"description":{"page":4,"quote":"| D2 | Analog | GPIO4 | ADC1_CH4, FSPIHD, MTMS | GPIO, ADC |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"},"power_domain":{"via":"chip u1 GPIO4","method":"chip_link"}},"chip_pin":{"pin":"GPIO4","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":4,"quote":"| D2 | Analog | GPIO4 | ADC1_CH4, FSPIHD, MTMS | GPIO, ADC |","method":"table","fragment":"functions_pinmap.json","table_id":"4_1"},"signal":"Analog","category":"adc"},{"src":{"page":4,"quote":"| D2 | Analog | GPIO4 | ADC1_CH4, FSPIHD, MTMS | GPIO, ADC |","method":"table","fragment":"functions_pinmap.json","table_id":"4_1"},"signal":"ADC1_CH4","category":"adc"},{"src":{"page":4,"quote":"| D2 | Analog | GPIO4 | ADC1_CH4, FSPIHD, MTMS | GPIO, ADC |","method":"table","fragment":"functions_pinmap.json","table_id":"4_1"},"signal":"FSPIHD","category":"spi"},{"src":{"page":4,"quote":"| D2 | Analog | GPIO4 | ADC1_CH4, FSPIHD, MTMS | GPIO, ADC |","method":"table","fragment":"functions_pinmap.json","table_id":"4_1"},"signal":"MTMS","category":"jtag"},{"alt":"F1","src":{"page":20,"quote":"| 9 | GPIO4 |  | MTMS | … | GPIO4 | … | FSPIHD |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO4","signal":"GPIO4","category":"gpio"},{"src":{"page":20,"quote":"| 9 | GPIO4 |  | MTMS | … | GPIO4 | … | FSPIHD |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO4","signal":"GPIO matrix (any routable peripheral signal)","category":"gpio_matrix"}],"electrical":{"ioh":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOH | High-level source current (VDD 1 = 3.3 V, VOH >= 2.64 V, PAD_DRIVER = 3) | — | 40 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.04,"via":"chip u1 GPIO4","orig":{"typ":40,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"High-level source current","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3"}],"iol":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOL | Low-level sink current (VDD 1 = 3.3 V, VOL = 0.495 V, PAD_DRIVER = 3) | — | 28 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.028,"via":"chip u1 GPIO4","orig":{"typ":28,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Low-level sink current","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3"}],"vih":[{"max":3.6,"min":2.475,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO4","unit":"V","symbol":"VIH","category":"characteristic","parameter":"High-level input voltage","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3"}],"vil":[{"max":0.825,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIL | Low-level input voltage | –0.3 | — | 1 0.25 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO4","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Low-level input voltage","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD"}],"voh":[{"min":2.64,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOH | High-level output voltage | 1 0.8 × VDD | — | — | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO4","unit":"V","symbol":"VOH","category":"characteristic","parameter":"High-level output voltage","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD"}],"vol":[{"max":0.33,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOL | Low-level output voltage | — | — | 1 0.1 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO4","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Low-level output voltage","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD"}],"pull_up":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PU | Internal weak pull-up resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO4","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Internal weak pull-up resistor","conditions":"VDD=3.3V; 25 °C"}],"pull_down":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PD | Internal weak pull-down resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO4","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Internal weak pull-down resistor","conditions":"VDD=3.3V; 25 °C"}],"io_voltage":[{"src":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"U4 pins 11/17/31/32 net VCC_3V3","method":"derived","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level (ESP32-C3 VDD3P3 = VCC_3V3)"}],"input_leakage":[{"max":5e-8,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IIH | High-level input current | — | — | 50 | nA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO4","orig":{"max":50,"unit":"nA"},"unit":"A","symbol":"IIH/IIL","category":"characteristic","parameter":"High/low-level input current","conditions":"VDD=3.3V; 25 °C"}],"abs_max_voltage":[{"max":3.6,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | … | VDD 1 + 0.3 | V |; | Input power pins 1 | Allowed input voltage | –0.3 | 3.6 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO4","unit":"V","category":"absolute_max","parameter":"IO input voltage (from VIH max)","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V"}],"adc_input_range":[{"max":2.5,"min":0,"src":{"doc":"ESP32-C3 datasheet","page":56,"quote":"|  | ATTEN3, effective measurement range of 0 ~ 2500 | –35 | 35 | mV |","method":"table","fragment":"ratings_pins.json","table_id":"56_2"},"via":"chip u1 GPIO4","orig":{"max":2500,"min":0,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"ADC effective measurement range (ATTEN3)","conditions":"ADC-capable GPIO0–GPIO5 only; ATTEN3; total error ±35 mV"}],"input_capacitance":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| CIN | Pin capacitance | — | 2 | — | pF |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0,"via":"chip u1 GPIO4","orig":{"typ":2,"unit":"pF"},"unit":"F","symbol":"CIN","category":"characteristic","parameter":"Pin capacitance","conditions":"VDD=3.3V; 25 °C"}],"five_volt_tolerant":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO4","value":false,"category":"absolute_max","parameter":"5 V tolerant","conditions":"inputs limited to VDD + 0.3 V"}]},"entity_type":"pin"},{"id":"4","attrs":{"net":"D3","pad":"4","kind":"gpio","label":"D3","number":10,"chip_pin":"GPIO5","position":"4","connector":"J2","designator":"4","castellated":true,"description":"GPIO, ADC","power_domain":"VDD3P3_RTC"},"sources":[{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 4 net D3","method":"table","fragment":"entities_edge.json"},{"page":4,"quote":"| D3 | Analog | GPIO5 | ADC2_CH0, FSPIWP, MTDI | GPIO, ADC |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"}],"attr_src":{"net":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 4 net D3","method":"table","fragment":"entities_edge.json"},"pad":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 4 net D3","method":"table","fragment":"entities_edge.json"},"kind":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 4 net D3","method":"table","fragment":"entities_edge.json"},"label":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 4 net D3","method":"table","fragment":"entities_edge.json"},"number":{"via":"chip u1 GPIO5","method":"chip_link"},"chip_pin":{"page":4,"quote":"| D3 | Analog | GPIO5 | ADC2_CH0, FSPIWP, MTDI | GPIO, ADC |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"},"position":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 4 net D3","method":"table","fragment":"entities_edge.json"},"connector":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 4 net D3","method":"table","fragment":"entities_edge.json"},"designator":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 4 net D3","method":"table","fragment":"entities_edge.json"},"castellated":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 4 net D3","method":"table","fragment":"entities_edge.json"},"description":{"page":4,"quote":"| D3 | Analog | GPIO5 | ADC2_CH0, FSPIWP, MTDI | GPIO, ADC |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"},"power_domain":{"via":"chip u1 GPIO5","method":"chip_link"}},"chip_pin":{"pin":"GPIO5","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":4,"quote":"| D3 | Analog | GPIO5 | ADC2_CH0, FSPIWP, MTDI | GPIO, ADC |","method":"table","fragment":"functions_pinmap.json","table_id":"4_1"},"signal":"Analog","category":"adc"},{"src":{"page":4,"quote":"| D3 | Analog | GPIO5 | ADC2_CH0, FSPIWP, MTDI | GPIO, ADC |","method":"table","fragment":"functions_pinmap.json","table_id":"4_1"},"signal":"ADC2_CH0","category":"adc"},{"src":{"page":4,"quote":"| D3 | Analog | GPIO5 | ADC2_CH0, FSPIWP, MTDI | GPIO, ADC |","method":"table","fragment":"functions_pinmap.json","table_id":"4_1"},"signal":"FSPIWP","category":"spi"},{"src":{"page":4,"quote":"| D3 | Analog | GPIO5 | ADC2_CH0, FSPIWP, MTDI | GPIO, ADC |","method":"table","fragment":"functions_pinmap.json","table_id":"4_1"},"signal":"MTDI","category":"jtag"},{"alt":"F1","src":{"page":20,"quote":"| 10 | GPIO5 |  | MTDI | … | GPIO5 | … | FSPIWP |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO5","signal":"GPIO5","category":"gpio"},{"src":{"page":20,"quote":"| 10 | GPIO5 |  | MTDI | … | GPIO5 | … | FSPIWP |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO5","signal":"GPIO matrix (any routable peripheral signal)","category":"gpio_matrix"}],"electrical":{"ioh":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOH | High-level source current (VDD 1 = 3.3 V, VOH >= 2.64 V, PAD_DRIVER = 3) | — | 40 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.04,"via":"chip u1 GPIO5","orig":{"typ":40,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"High-level source current","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3"}],"iol":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOL | Low-level sink current (VDD 1 = 3.3 V, VOL = 0.495 V, PAD_DRIVER = 3) | — | 28 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.028,"via":"chip u1 GPIO5","orig":{"typ":28,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Low-level sink current","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3"}],"vih":[{"max":3.6,"min":2.475,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO5","unit":"V","symbol":"VIH","category":"characteristic","parameter":"High-level input voltage","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3"}],"vil":[{"max":0.825,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIL | Low-level input voltage | –0.3 | — | 1 0.25 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO5","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Low-level input voltage","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD"}],"voh":[{"min":2.64,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOH | High-level output voltage | 1 0.8 × VDD | — | — | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO5","unit":"V","symbol":"VOH","category":"characteristic","parameter":"High-level output voltage","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD"}],"vol":[{"max":0.33,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOL | Low-level output voltage | — | — | 1 0.1 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO5","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Low-level output voltage","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD"}],"pull_up":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PU | Internal weak pull-up resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO5","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Internal weak pull-up resistor","conditions":"VDD=3.3V; 25 °C"}],"pull_down":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PD | Internal weak pull-down resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO5","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Internal weak pull-down resistor","conditions":"VDD=3.3V; 25 °C"}],"io_voltage":[{"src":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"U4 pins 11/17/31/32 net VCC_3V3","method":"derived","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level (ESP32-C3 VDD3P3 = VCC_3V3)"}],"input_leakage":[{"max":5e-8,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IIH | High-level input current | — | — | 50 | nA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO5","orig":{"max":50,"unit":"nA"},"unit":"A","symbol":"IIH/IIL","category":"characteristic","parameter":"High/low-level input current","conditions":"VDD=3.3V; 25 °C"}],"abs_max_voltage":[{"max":3.6,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | … | VDD 1 + 0.3 | V |; | Input power pins 1 | Allowed input voltage | –0.3 | 3.6 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO5","unit":"V","category":"absolute_max","parameter":"IO input voltage (from VIH max)","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V"}],"adc_input_range":[{"max":2.5,"min":0,"src":{"doc":"ESP32-C3 datasheet","page":56,"quote":"|  | ATTEN3, effective measurement range of 0 ~ 2500 | –35 | 35 | mV |","method":"table","fragment":"ratings_pins.json","table_id":"56_2"},"via":"chip u1 GPIO5","orig":{"max":2500,"min":0,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"ADC effective measurement range (ATTEN3)","conditions":"ADC-capable GPIO0–GPIO5 only; ATTEN3; total error ±35 mV"}],"input_capacitance":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| CIN | Pin capacitance | — | 2 | — | pF |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0,"via":"chip u1 GPIO5","orig":{"typ":2,"unit":"pF"},"unit":"F","symbol":"CIN","category":"characteristic","parameter":"Pin capacitance","conditions":"VDD=3.3V; 25 °C"}],"five_volt_tolerant":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO5","value":false,"category":"absolute_max","parameter":"5 V tolerant","conditions":"inputs limited to VDD + 0.3 V"}]},"entity_type":"pin"},{"id":"5","attrs":{"net":"D4","pad":"5","kind":"gpio","label":"D4","number":12,"chip_pin":"GPIO6","position":"5","connector":"J2","designator":"5","castellated":true,"description":"GPIO, I2C Data","power_domain":"VDD3P3_CPU"},"sources":[{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 5 net D4","method":"table","fragment":"entities_edge.json"},{"page":4,"quote":"| D4 | SDA | GPIO6 | FSPICLK, MTCK | GPIO, I2C Data |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"}],"attr_src":{"net":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 5 net D4","method":"table","fragment":"entities_edge.json"},"pad":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 5 net D4","method":"table","fragment":"entities_edge.json"},"kind":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 5 net D4","method":"table","fragment":"entities_edge.json"},"label":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 5 net D4","method":"table","fragment":"entities_edge.json"},"number":{"via":"chip u1 GPIO6","method":"chip_link"},"chip_pin":{"page":4,"quote":"| D4 | SDA | GPIO6 | FSPICLK, MTCK | GPIO, I2C Data |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"},"position":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 5 net D4","method":"table","fragment":"entities_edge.json"},"connector":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 5 net D4","method":"table","fragment":"entities_edge.json"},"designator":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 5 net D4","method":"table","fragment":"entities_edge.json"},"castellated":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 5 net D4","method":"table","fragment":"entities_edge.json"},"description":{"page":4,"quote":"| D4 | SDA | GPIO6 | FSPICLK, MTCK | GPIO, I2C Data |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"},"power_domain":{"via":"chip u1 GPIO6","method":"chip_link"}},"chip_pin":{"pin":"GPIO6","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":4,"quote":"| D4 | SDA | GPIO6 | FSPICLK, MTCK | GPIO, I2C Data |","method":"table","fragment":"functions_pinmap.json","table_id":"4_1"},"signal":"SDA","category":"i2c"},{"src":{"page":4,"quote":"| D4 | SDA | GPIO6 | FSPICLK, MTCK | GPIO, I2C Data |","method":"table","fragment":"functions_pinmap.json","table_id":"4_1"},"signal":"FSPICLK","category":"spi"},{"src":{"page":4,"quote":"| D4 | SDA | GPIO6 | FSPICLK, MTCK | GPIO, I2C Data |","method":"table","fragment":"functions_pinmap.json","table_id":"4_1"},"signal":"MTCK","category":"jtag"},{"alt":"F1","src":{"page":20,"quote":"| 12 | GPIO6 |  | MTCK | … | GPIO6 | … | FSPICLK |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO6","signal":"GPIO6","category":"gpio"},{"src":{"page":20,"quote":"| 12 | GPIO6 |  | MTCK | … | GPIO6 | … | FSPICLK |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO6","signal":"GPIO matrix (any routable peripheral signal)","category":"gpio_matrix"}],"electrical":{"ioh":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOH | High-level source current (VDD 1 = 3.3 V, VOH >= 2.64 V, PAD_DRIVER = 3) | — | 40 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.04,"via":"chip u1 GPIO6","orig":{"typ":40,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"High-level source current","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3"}],"iol":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOL | Low-level sink current (VDD 1 = 3.3 V, VOL = 0.495 V, PAD_DRIVER = 3) | — | 28 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.028,"via":"chip u1 GPIO6","orig":{"typ":28,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Low-level sink current","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3"}],"vih":[{"max":3.6,"min":2.475,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO6","unit":"V","symbol":"VIH","category":"characteristic","parameter":"High-level input voltage","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3"}],"vil":[{"max":0.825,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIL | Low-level input voltage | –0.3 | — | 1 0.25 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO6","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Low-level input voltage","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD"}],"voh":[{"min":2.64,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOH | High-level output voltage | 1 0.8 × VDD | — | — | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO6","unit":"V","symbol":"VOH","category":"characteristic","parameter":"High-level output voltage","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD"}],"vol":[{"max":0.33,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOL | Low-level output voltage | — | — | 1 0.1 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO6","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Low-level output voltage","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD"}],"pull_up":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PU | Internal weak pull-up resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO6","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Internal weak pull-up resistor","conditions":"VDD=3.3V; 25 °C"}],"pull_down":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PD | Internal weak pull-down resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO6","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Internal weak pull-down resistor","conditions":"VDD=3.3V; 25 °C"}],"io_voltage":[{"src":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"U4 pins 11/17/31/32 net VCC_3V3","method":"derived","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level (ESP32-C3 VDD3P3 = VCC_3V3)"}],"input_leakage":[{"max":5e-8,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IIH | High-level input current | — | — | 50 | nA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO6","orig":{"max":50,"unit":"nA"},"unit":"A","symbol":"IIH/IIL","category":"characteristic","parameter":"High/low-level input current","conditions":"VDD=3.3V; 25 °C"}],"abs_max_voltage":[{"max":3.6,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | … | VDD 1 + 0.3 | V |; | Input power pins 1 | Allowed input voltage | –0.3 | 3.6 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO6","unit":"V","category":"absolute_max","parameter":"IO input voltage (from VIH max)","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V"}],"input_capacitance":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| CIN | Pin capacitance | — | 2 | — | pF |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0,"via":"chip u1 GPIO6","orig":{"typ":2,"unit":"pF"},"unit":"F","symbol":"CIN","category":"characteristic","parameter":"Pin capacitance","conditions":"VDD=3.3V; 25 °C"}],"five_volt_tolerant":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO6","value":false,"category":"absolute_max","parameter":"5 V tolerant","conditions":"inputs limited to VDD + 0.3 V"}]},"entity_type":"pin"},{"id":"6","attrs":{"net":"D5","pad":"6","kind":"gpio","label":"D5","number":13,"chip_pin":"GPIO7","position":"6","connector":"J2","designator":"6","castellated":true,"description":"GPIO, I2C Clock","power_domain":"VDD3P3_CPU"},"sources":[{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 6 net D5","method":"table","fragment":"entities_edge.json"},{"page":4,"quote":"| D5 | SCL | GPIO7 | FSPID, MTDO | GPIO, I2C Clock |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"}],"attr_src":{"net":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 6 net D5","method":"table","fragment":"entities_edge.json"},"pad":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 6 net D5","method":"table","fragment":"entities_edge.json"},"kind":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 6 net D5","method":"table","fragment":"entities_edge.json"},"label":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 6 net D5","method":"table","fragment":"entities_edge.json"},"number":{"via":"chip u1 GPIO7","method":"chip_link"},"chip_pin":{"page":4,"quote":"| D5 | SCL | GPIO7 | FSPID, MTDO | GPIO, I2C Clock |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"},"position":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 6 net D5","method":"table","fragment":"entities_edge.json"},"connector":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 6 net D5","method":"table","fragment":"entities_edge.json"},"designator":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 6 net D5","method":"table","fragment":"entities_edge.json"},"castellated":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 6 net D5","method":"table","fragment":"entities_edge.json"},"description":{"page":4,"quote":"| D5 | SCL | GPIO7 | FSPID, MTDO | GPIO, I2C Clock |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"},"power_domain":{"via":"chip u1 GPIO7","method":"chip_link"}},"chip_pin":{"pin":"GPIO7","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":4,"quote":"| D5 | SCL | GPIO7 | FSPID, MTDO | GPIO, I2C Clock |","method":"table","fragment":"functions_pinmap.json","table_id":"4_1"},"signal":"SCL","category":"i2c"},{"src":{"page":4,"quote":"| D5 | SCL | GPIO7 | FSPID, MTDO | GPIO, I2C Clock |","method":"table","fragment":"functions_pinmap.json","table_id":"4_1"},"signal":"FSPID","category":"spi"},{"src":{"page":4,"quote":"| D5 | SCL | GPIO7 | FSPID, MTDO | GPIO, I2C Clock |","method":"table","fragment":"functions_pinmap.json","table_id":"4_1"},"signal":"MTDO","category":"jtag"},{"alt":"F1","src":{"page":20,"quote":"| 13 | GPIO7 |  | MTDO | … | GPIO7 | … | FSPID |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO7","signal":"GPIO7","category":"gpio"},{"src":{"page":20,"quote":"| 13 | GPIO7 |  | MTDO | … | GPIO7 | … | FSPID |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO7","signal":"GPIO matrix (any routable peripheral signal)","category":"gpio_matrix"}],"electrical":{"ioh":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOH | High-level source current (VDD 1 = 3.3 V, VOH >= 2.64 V, PAD_DRIVER = 3) | — | 40 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.04,"via":"chip u1 GPIO7","orig":{"typ":40,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"High-level source current","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3"}],"iol":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOL | Low-level sink current (VDD 1 = 3.3 V, VOL = 0.495 V, PAD_DRIVER = 3) | — | 28 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.028,"via":"chip u1 GPIO7","orig":{"typ":28,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Low-level sink current","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3"}],"vih":[{"max":3.6,"min":2.475,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO7","unit":"V","symbol":"VIH","category":"characteristic","parameter":"High-level input voltage","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3"}],"vil":[{"max":0.825,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIL | Low-level input voltage | –0.3 | — | 1 0.25 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO7","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Low-level input voltage","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD"}],"voh":[{"min":2.64,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOH | High-level output voltage | 1 0.8 × VDD | — | — | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO7","unit":"V","symbol":"VOH","category":"characteristic","parameter":"High-level output voltage","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD"}],"vol":[{"max":0.33,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOL | Low-level output voltage | — | — | 1 0.1 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO7","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Low-level output voltage","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD"}],"pull_up":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PU | Internal weak pull-up resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO7","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Internal weak pull-up resistor","conditions":"VDD=3.3V; 25 °C"}],"pull_down":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PD | Internal weak pull-down resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO7","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Internal weak pull-down resistor","conditions":"VDD=3.3V; 25 °C"}],"io_voltage":[{"src":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"U4 pins 11/17/31/32 net VCC_3V3","method":"derived","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level (ESP32-C3 VDD3P3 = VCC_3V3)"}],"input_leakage":[{"max":5e-8,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IIH | High-level input current | — | — | 50 | nA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO7","orig":{"max":50,"unit":"nA"},"unit":"A","symbol":"IIH/IIL","category":"characteristic","parameter":"High/low-level input current","conditions":"VDD=3.3V; 25 °C"}],"abs_max_voltage":[{"max":3.6,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | … | VDD 1 + 0.3 | V |; | Input power pins 1 | Allowed input voltage | –0.3 | 3.6 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO7","unit":"V","category":"absolute_max","parameter":"IO input voltage (from VIH max)","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V"}],"input_capacitance":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| CIN | Pin capacitance | — | 2 | — | pF |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0,"via":"chip u1 GPIO7","orig":{"typ":2,"unit":"pF"},"unit":"F","symbol":"CIN","category":"characteristic","parameter":"Pin capacitance","conditions":"VDD=3.3V; 25 °C"}],"five_volt_tolerant":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO7","value":false,"category":"absolute_max","parameter":"5 V tolerant","conditions":"inputs limited to VDD + 0.3 V"}]},"entity_type":"pin"},{"id":"7","attrs":{"net":"TX_D6","pad":"7","kind":"gpio","label":"D6","number":28,"chip_pin":"GPIO21","position":"7","connector":"J2","designator":"7","castellated":true,"description":"GPIO, UART Transmit","power_domain":"VDD3P3_CPU"},"sources":[{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 7 net TX_D6","method":"table","fragment":"entities_edge.json"},{"page":4,"quote":"| D6 | TX | GPIO21 | U0TXD | GPIO, UART Transmit |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"}],"attr_src":{"net":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 7 net TX_D6","method":"table","fragment":"entities_edge.json"},"pad":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 7 net TX_D6","method":"table","fragment":"entities_edge.json"},"kind":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 7 net TX_D6","method":"table","fragment":"entities_edge.json"},"label":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 7 net TX_D6","method":"table","fragment":"entities_edge.json"},"number":{"via":"chip u1 GPIO21","method":"chip_link"},"chip_pin":{"page":4,"quote":"| D6 | TX | GPIO21 | U0TXD | GPIO, UART Transmit |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"},"position":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 7 net TX_D6","method":"table","fragment":"entities_edge.json"},"connector":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 7 net TX_D6","method":"table","fragment":"entities_edge.json"},"designator":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 7 net TX_D6","method":"table","fragment":"entities_edge.json"},"castellated":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J2 pad 7 net TX_D6","method":"table","fragment":"entities_edge.json"},"description":{"page":4,"quote":"| D6 | TX | GPIO21 | U0TXD | GPIO, UART Transmit |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"},"power_domain":{"via":"chip u1 GPIO21","method":"chip_link"}},"chip_pin":{"pin":"GPIO21","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":4,"quote":"| D6 | TX | GPIO21 | U0TXD | GPIO, UART Transmit |","method":"table","fragment":"functions_pinmap.json","table_id":"4_1"},"signal":"TX","category":"uart"},{"src":{"page":4,"quote":"| D6 | TX | GPIO21 | U0TXD | GPIO, UART Transmit |","method":"table","fragment":"functions_pinmap.json","table_id":"4_1"},"signal":"U0TXD","category":"uart"},{"alt":"F1","src":{"page":20,"quote":"| 28 | GPIO21 |  | U0TXD | … | GPIO21 | … |  |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO21","signal":"GPIO21","category":"gpio"},{"src":{"page":20,"quote":"| 28 | GPIO21 |  | U0TXD | … | GPIO21 | … |  |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO21","signal":"GPIO matrix (any routable peripheral signal)","category":"gpio_matrix"}],"electrical":{"ioh":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOH | High-level source current (VDD 1 = 3.3 V, VOH >= 2.64 V, PAD_DRIVER = 3) | — | 40 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.04,"via":"chip u1 GPIO21","orig":{"typ":40,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"High-level source current","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3"}],"iol":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOL | Low-level sink current (VDD 1 = 3.3 V, VOL = 0.495 V, PAD_DRIVER = 3) | — | 28 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.028,"via":"chip u1 GPIO21","orig":{"typ":28,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Low-level sink current","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3"}],"vih":[{"max":3.6,"min":2.475,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO21","unit":"V","symbol":"VIH","category":"characteristic","parameter":"High-level input voltage","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3"}],"vil":[{"max":0.825,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIL | Low-level input voltage | –0.3 | — | 1 0.25 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO21","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Low-level input voltage","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD"}],"voh":[{"min":2.64,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOH | High-level output voltage | 1 0.8 × VDD | — | — | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO21","unit":"V","symbol":"VOH","category":"characteristic","parameter":"High-level output voltage","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD"}],"vol":[{"max":0.33,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOL | Low-level output voltage | — | — | 1 0.1 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO21","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Low-level output voltage","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD"}],"pull_up":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PU | Internal weak pull-up resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO21","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Internal weak pull-up resistor","conditions":"VDD=3.3V; 25 °C"}],"pull_down":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PD | Internal weak pull-down resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO21","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Internal weak pull-down resistor","conditions":"VDD=3.3V; 25 °C"}],"io_voltage":[{"src":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"U4 pins 11/17/31/32 net VCC_3V3","method":"derived","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level (ESP32-C3 VDD3P3 = VCC_3V3)"}],"input_leakage":[{"max":5e-8,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IIH | High-level input current | — | — | 50 | nA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO21","orig":{"max":50,"unit":"nA"},"unit":"A","symbol":"IIH/IIL","category":"characteristic","parameter":"High/low-level input current","conditions":"VDD=3.3V; 25 °C"}],"abs_max_voltage":[{"max":3.6,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | … | VDD 1 + 0.3 | V |; | Input power pins 1 | Allowed input voltage | –0.3 | 3.6 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO21","unit":"V","category":"absolute_max","parameter":"IO input voltage (from VIH max)","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V"}],"input_capacitance":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| CIN | Pin capacitance | — | 2 | — | pF |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0,"via":"chip u1 GPIO21","orig":{"typ":2,"unit":"pF"},"unit":"F","symbol":"CIN","category":"characteristic","parameter":"Pin capacitance","conditions":"VDD=3.3V; 25 °C"}],"series_resistance":[{"src":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"R5 1R TX_D6 N$29","method":"table","fragment":"ratings_board.json"},"typ":1,"via":"direct","orig":{"typ":1,"unit":"Ω"},"unit":"ohm","category":"characteristic","parameter":"Series resistor R5 between D6 pad and GPIO21"}],"five_volt_tolerant":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO21","value":false,"category":"absolute_max","parameter":"5 V tolerant","conditions":"inputs limited to VDD + 0.3 V"}]},"entity_type":"pin"},{"id":"8","attrs":{"net":"RX_D7","pad":"1","kind":"gpio","label":"D7","number":27,"chip_pin":"GPIO20","position":"8","connector":"J1","designator":"8","castellated":true,"description":"GPIO, UART Receive","power_domain":"VDD3P3_CPU"},"sources":[{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 1 net RX_D7","method":"table","fragment":"entities_edge.json"},{"page":4,"quote":"| D7 | RX | GPIO20 | U0RXD | GPIO, UART Receive |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"}],"attr_src":{"net":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 1 net RX_D7","method":"table","fragment":"entities_edge.json"},"pad":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 1 net RX_D7","method":"table","fragment":"entities_edge.json"},"kind":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 1 net RX_D7","method":"table","fragment":"entities_edge.json"},"label":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 1 net RX_D7","method":"table","fragment":"entities_edge.json"},"number":{"via":"chip u1 GPIO20","method":"chip_link"},"chip_pin":{"page":4,"quote":"| D7 | RX | GPIO20 | U0RXD | GPIO, UART Receive |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"},"position":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 1 net RX_D7","method":"table","fragment":"entities_edge.json"},"connector":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 1 net RX_D7","method":"table","fragment":"entities_edge.json"},"designator":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 1 net RX_D7","method":"table","fragment":"entities_edge.json"},"castellated":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 1 net RX_D7","method":"table","fragment":"entities_edge.json"},"description":{"page":4,"quote":"| D7 | RX | GPIO20 | U0RXD | GPIO, UART Receive |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"},"power_domain":{"via":"chip u1 GPIO20","method":"chip_link"}},"chip_pin":{"pin":"GPIO20","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":4,"quote":"| D7 | RX | GPIO20 | U0RXD | GPIO, UART Receive |","method":"table","fragment":"functions_pinmap.json","table_id":"4_1"},"signal":"RX","category":"uart"},{"src":{"page":4,"quote":"| D7 | RX | GPIO20 | U0RXD | GPIO, UART Receive |","method":"table","fragment":"functions_pinmap.json","table_id":"4_1"},"signal":"U0RXD","category":"uart"},{"alt":"F1","src":{"page":20,"quote":"| 27 | GPIO20 |  | U0RXD | … | GPIO20 | … |  |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO20","signal":"GPIO20","category":"gpio"},{"src":{"page":20,"quote":"| 27 | GPIO20 |  | U0RXD | … | GPIO20 | … |  |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO20","signal":"GPIO matrix (any routable peripheral signal)","category":"gpio_matrix"}],"electrical":{"ioh":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOH | High-level source current (VDD 1 = 3.3 V, VOH >= 2.64 V, PAD_DRIVER = 3) | — | 40 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.04,"via":"chip u1 GPIO20","orig":{"typ":40,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"High-level source current","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3"}],"iol":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOL | Low-level sink current (VDD 1 = 3.3 V, VOL = 0.495 V, PAD_DRIVER = 3) | — | 28 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.028,"via":"chip u1 GPIO20","orig":{"typ":28,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Low-level sink current","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3"}],"vih":[{"max":3.6,"min":2.475,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO20","unit":"V","symbol":"VIH","category":"characteristic","parameter":"High-level input voltage","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3"}],"vil":[{"max":0.825,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIL | Low-level input voltage | –0.3 | — | 1 0.25 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO20","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Low-level input voltage","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD"}],"voh":[{"min":2.64,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOH | High-level output voltage | 1 0.8 × VDD | — | — | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO20","unit":"V","symbol":"VOH","category":"characteristic","parameter":"High-level output voltage","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD"}],"vol":[{"max":0.33,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOL | Low-level output voltage | — | — | 1 0.1 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO20","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Low-level output voltage","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD"}],"pull_up":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PU | Internal weak pull-up resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO20","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Internal weak pull-up resistor","conditions":"VDD=3.3V; 25 °C"}],"pull_down":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PD | Internal weak pull-down resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO20","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Internal weak pull-down resistor","conditions":"VDD=3.3V; 25 °C"}],"io_voltage":[{"src":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"U4 pins 11/17/31/32 net VCC_3V3","method":"derived","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level (ESP32-C3 VDD3P3 = VCC_3V3)"}],"input_leakage":[{"max":5e-8,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IIH | High-level input current | — | — | 50 | nA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO20","orig":{"max":50,"unit":"nA"},"unit":"A","symbol":"IIH/IIL","category":"characteristic","parameter":"High/low-level input current","conditions":"VDD=3.3V; 25 °C"}],"abs_max_voltage":[{"max":3.6,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | … | VDD 1 + 0.3 | V |; | Input power pins 1 | Allowed input voltage | –0.3 | 3.6 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO20","unit":"V","category":"absolute_max","parameter":"IO input voltage (from VIH max)","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V"}],"input_capacitance":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| CIN | Pin capacitance | — | 2 | — | pF |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0,"via":"chip u1 GPIO20","orig":{"typ":2,"unit":"pF"},"unit":"F","symbol":"CIN","category":"characteristic","parameter":"Pin capacitance","conditions":"VDD=3.3V; 25 °C"}],"five_volt_tolerant":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO20","value":false,"category":"absolute_max","parameter":"5 V tolerant","conditions":"inputs limited to VDD + 0.3 V"}]},"entity_type":"pin"},{"id":"9","attrs":{"net":"D8","pad":"2","kind":"gpio","label":"D8","number":14,"chip_pin":"GPIO8","position":"9","connector":"J1","designator":"9","castellated":true,"description":"GPIO, SPI Clock","power_domain":"VDD3P3_CPU"},"sources":[{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 2 net D8","method":"table","fragment":"entities_edge.json"},{"page":4,"quote":"| D8 | SCK | GPIO8 |  | GPIO, SPI Clock |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"}],"attr_src":{"net":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 2 net D8","method":"table","fragment":"entities_edge.json"},"pad":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 2 net D8","method":"table","fragment":"entities_edge.json"},"kind":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 2 net D8","method":"table","fragment":"entities_edge.json"},"label":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 2 net D8","method":"table","fragment":"entities_edge.json"},"number":{"via":"chip u1 GPIO8","method":"chip_link"},"chip_pin":{"page":4,"quote":"| D8 | SCK | GPIO8 |  | GPIO, SPI Clock |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"},"position":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 2 net D8","method":"table","fragment":"entities_edge.json"},"connector":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 2 net D8","method":"table","fragment":"entities_edge.json"},"designator":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 2 net D8","method":"table","fragment":"entities_edge.json"},"castellated":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 2 net D8","method":"table","fragment":"entities_edge.json"},"description":{"page":4,"quote":"| D8 | SCK | GPIO8 |  | GPIO, SPI Clock |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"},"power_domain":{"via":"chip u1 GPIO8","method":"chip_link"}},"chip_pin":{"pin":"GPIO8","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":4,"quote":"| D8 | SCK | GPIO8 |  | GPIO, SPI Clock |","method":"table","fragment":"functions_pinmap.json","table_id":"4_1"},"signal":"SCK","category":"spi"},{"alt":"F0","src":{"page":20,"quote":"| 14 | GPIO8 |  | GPIO8 | … | GPIO8 | … |  |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO8","signal":"GPIO8","category":"gpio"},{"src":{"page":20,"quote":"| 14 | GPIO8 |  | GPIO8 | … | GPIO8 | … |  |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO8","signal":"GPIO matrix (any routable peripheral signal)","category":"gpio_matrix"}],"electrical":{"ioh":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOH | High-level source current (VDD 1 = 3.3 V, VOH >= 2.64 V, PAD_DRIVER = 3) | — | 40 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.04,"via":"chip u1 GPIO8","orig":{"typ":40,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"High-level source current","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3"}],"iol":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOL | Low-level sink current (VDD 1 = 3.3 V, VOL = 0.495 V, PAD_DRIVER = 3) | — | 28 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.028,"via":"chip u1 GPIO8","orig":{"typ":28,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Low-level sink current","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3"}],"vih":[{"max":3.6,"min":2.475,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO8","unit":"V","symbol":"VIH","category":"characteristic","parameter":"High-level input voltage","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3"}],"vil":[{"max":0.825,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIL | Low-level input voltage | –0.3 | — | 1 0.25 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO8","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Low-level input voltage","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD"}],"voh":[{"min":2.64,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOH | High-level output voltage | 1 0.8 × VDD | — | — | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO8","unit":"V","symbol":"VOH","category":"characteristic","parameter":"High-level output voltage","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD"}],"vol":[{"max":0.33,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOL | Low-level output voltage | — | — | 1 0.1 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO8","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Low-level output voltage","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD"}],"pull_up":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PU | Internal weak pull-up resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO8","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Internal weak pull-up resistor","conditions":"VDD=3.3V; 25 °C"}],"pull_down":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PD | Internal weak pull-down resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO8","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Internal weak pull-down resistor","conditions":"VDD=3.3V; 25 °C"}],"io_voltage":[{"src":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"U4 pins 11/17/31/32 net VCC_3V3","method":"derived","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level (ESP32-C3 VDD3P3 = VCC_3V3)"}],"input_leakage":[{"max":5e-8,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IIH | High-level input current | — | — | 50 | nA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO8","orig":{"max":50,"unit":"nA"},"unit":"A","symbol":"IIH/IIL","category":"characteristic","parameter":"High/low-level input current","conditions":"VDD=3.3V; 25 °C"}],"boot_strapping":[{"src":{"doc":"ESP32-C3 datasheet","page":30,"quote":"| Strapping Pin | Default Configuration | Bit Value | GPIO2 | Floating | GPIO8 | Floating | GPIO9 | Weak pull-up | 1 |","method":"derived","fragment":"ratings_pins.json","table_id":"30_1"},"via":"chip u1 GPIO8","value":true,"category":"characteristic","parameter":"Strapping pin (boot mode selection)","conditions":"GPIO2 floating, GPIO8 floating, GPIO9 weak pull-up by default; sampled at CHIP_EN rising, hold 3 ms"}],"abs_max_voltage":[{"max":3.6,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | … | VDD 1 + 0.3 | V |; | Input power pins 1 | Allowed input voltage | –0.3 | 3.6 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO8","unit":"V","category":"absolute_max","parameter":"IO input voltage (from VIH max)","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V"}],"input_capacitance":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| CIN | Pin capacitance | — | 2 | — | pF |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0,"via":"chip u1 GPIO8","orig":{"typ":2,"unit":"pF"},"unit":"F","symbol":"CIN","category":"characteristic","parameter":"Pin capacitance","conditions":"VDD=3.3V; 25 °C"}],"five_volt_tolerant":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO8","value":false,"category":"absolute_max","parameter":"5 V tolerant","conditions":"inputs limited to VDD + 0.3 V"}]},"entity_type":"pin"},{"id":"10","attrs":{"net":"D9","pad":"3","kind":"gpio","label":"D9","number":15,"chip_pin":"GPIO9","position":"10","connector":"J1","designator":"10","castellated":true,"description":"GPIO, SPI Data","power_domain":"VDD3P3_CPU"},"sources":[{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 3 net D9","method":"table","fragment":"entities_edge.json"},{"page":4,"quote":"| D9 | MISO | GPIO9 |  | GPIO, SPI Data |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"}],"attr_src":{"net":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 3 net D9","method":"table","fragment":"entities_edge.json"},"pad":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 3 net D9","method":"table","fragment":"entities_edge.json"},"kind":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 3 net D9","method":"table","fragment":"entities_edge.json"},"label":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 3 net D9","method":"table","fragment":"entities_edge.json"},"number":{"via":"chip u1 GPIO9","method":"chip_link"},"chip_pin":{"page":4,"quote":"| D9 | MISO | GPIO9 |  | GPIO, SPI Data |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"},"position":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 3 net D9","method":"table","fragment":"entities_edge.json"},"connector":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 3 net D9","method":"table","fragment":"entities_edge.json"},"designator":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 3 net D9","method":"table","fragment":"entities_edge.json"},"castellated":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 3 net D9","method":"table","fragment":"entities_edge.json"},"description":{"page":4,"quote":"| D9 | MISO | GPIO9 |  | GPIO, SPI Data |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"},"power_domain":{"via":"chip u1 GPIO9","method":"chip_link"}},"chip_pin":{"pin":"GPIO9","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":4,"quote":"| D9 | MISO | GPIO9 |  | GPIO, SPI Data |","method":"table","fragment":"functions_pinmap.json","table_id":"4_1"},"signal":"MISO","category":"spi"},{"src":{"page":4,"quote":"| Boot |  | GPIO9 |  | Enter Boot Mode |","method":"table","fragment":"functions_pinmap.json","table_id":"4_1"},"signal":"BOOT button","category":"control"},{"alt":"F0","src":{"page":20,"quote":"| 15 | GPIO9 |  | GPIO9 | … | GPIO9 | … |  |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO9","signal":"GPIO9","category":"gpio"},{"src":{"page":20,"quote":"| 15 | GPIO9 |  | GPIO9 | … | GPIO9 | … |  |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO9","signal":"GPIO matrix (any routable peripheral signal)","category":"gpio_matrix"}],"electrical":{"ioh":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOH | High-level source current (VDD 1 = 3.3 V, VOH >= 2.64 V, PAD_DRIVER = 3) | — | 40 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.04,"via":"chip u1 GPIO9","orig":{"typ":40,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"High-level source current","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3"}],"iol":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOL | Low-level sink current (VDD 1 = 3.3 V, VOL = 0.495 V, PAD_DRIVER = 3) | — | 28 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.028,"via":"chip u1 GPIO9","orig":{"typ":28,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Low-level sink current","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3"}],"vih":[{"max":3.6,"min":2.475,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO9","unit":"V","symbol":"VIH","category":"characteristic","parameter":"High-level input voltage","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3"}],"vil":[{"max":0.825,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIL | Low-level input voltage | –0.3 | — | 1 0.25 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO9","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Low-level input voltage","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD"}],"voh":[{"min":2.64,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOH | High-level output voltage | 1 0.8 × VDD | — | — | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO9","unit":"V","symbol":"VOH","category":"characteristic","parameter":"High-level output voltage","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD"}],"vol":[{"max":0.33,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOL | Low-level output voltage | — | — | 1 0.1 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO9","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Low-level output voltage","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD"}],"pull_up":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PU | Internal weak pull-up resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO9","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Internal weak pull-up resistor","conditions":"VDD=3.3V; 25 °C"}],"pull_down":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PD | Internal weak pull-down resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO9","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Internal weak pull-down resistor","conditions":"VDD=3.3V; 25 °C"}],"io_voltage":[{"src":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"U4 pins 11/17/31/32 net VCC_3V3","method":"derived","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level (ESP32-C3 VDD3P3 = VCC_3V3)"}],"input_leakage":[{"max":5e-8,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IIH | High-level input current | — | — | 50 | nA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO9","orig":{"max":50,"unit":"nA"},"unit":"A","symbol":"IIH/IIL","category":"characteristic","parameter":"High/low-level input current","conditions":"VDD=3.3V; 25 °C"}],"boot_strapping":[{"src":{"doc":"ESP32-C3 datasheet","page":30,"quote":"| Strapping Pin | Default Configuration | Bit Value | GPIO2 | Floating | GPIO8 | Floating | GPIO9 | Weak pull-up | 1 |","method":"derived","fragment":"ratings_pins.json","table_id":"30_1"},"via":"chip u1 GPIO9","value":true,"category":"characteristic","parameter":"Strapping pin (boot mode selection)","conditions":"GPIO2 floating, GPIO8 floating, GPIO9 weak pull-up by default; sampled at CHIP_EN rising, hold 3 ms"}],"abs_max_voltage":[{"max":3.6,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | … | VDD 1 + 0.3 | V |; | Input power pins 1 | Allowed input voltage | –0.3 | 3.6 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO9","unit":"V","category":"absolute_max","parameter":"IO input voltage (from VIH max)","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V"}],"pull_up_external":[{"src":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"R6 10k D9 VCC_3V3","method":"table","fragment":"ratings_board.json"},"typ":10000,"via":"direct","orig":{"typ":10,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"External pull-up R6 to 3V3 (BOOT strap)"}],"input_capacitance":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| CIN | Pin capacitance | — | 2 | — | pF |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0,"via":"chip u1 GPIO9","orig":{"typ":2,"unit":"pF"},"unit":"F","symbol":"CIN","category":"characteristic","parameter":"Pin capacitance","conditions":"VDD=3.3V; 25 °C"}],"five_volt_tolerant":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO9","value":false,"category":"absolute_max","parameter":"5 V tolerant","conditions":"inputs limited to VDD + 0.3 V"}]},"entity_type":"pin"},{"id":"11","attrs":{"net":"D10","pad":"4","kind":"gpio","label":"D10","number":16,"chip_pin":"GPIO10","position":"11","connector":"J1","designator":"11","castellated":true,"description":"GPIO, SPI Data","power_domain":"VDD3P3_CPU"},"sources":[{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 4 net D10","method":"table","fragment":"entities_edge.json"},{"page":4,"quote":"| D10 | MOSI | GPIO10 | FSPICS0 | GPIO, SPI Data |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"}],"attr_src":{"net":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 4 net D10","method":"table","fragment":"entities_edge.json"},"pad":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 4 net D10","method":"table","fragment":"entities_edge.json"},"kind":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 4 net D10","method":"table","fragment":"entities_edge.json"},"label":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 4 net D10","method":"table","fragment":"entities_edge.json"},"number":{"via":"chip u1 GPIO10","method":"chip_link"},"chip_pin":{"page":4,"quote":"| D10 | MOSI | GPIO10 | FSPICS0 | GPIO, SPI Data |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"},"position":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 4 net D10","method":"table","fragment":"entities_edge.json"},"connector":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 4 net D10","method":"table","fragment":"entities_edge.json"},"designator":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 4 net D10","method":"table","fragment":"entities_edge.json"},"castellated":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 4 net D10","method":"table","fragment":"entities_edge.json"},"description":{"page":4,"quote":"| D10 | MOSI | GPIO10 | FSPICS0 | GPIO, SPI Data |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"},"power_domain":{"via":"chip u1 GPIO10","method":"chip_link"}},"chip_pin":{"pin":"GPIO10","method":"rule","chip_id":"u1"},"functions":[{"src":{"page":4,"quote":"| D10 | MOSI | GPIO10 | FSPICS0 | GPIO, SPI Data |","method":"table","fragment":"functions_pinmap.json","table_id":"4_1"},"signal":"MOSI","category":"spi"},{"src":{"page":4,"quote":"| D10 | MOSI | GPIO10 | FSPICS0 | GPIO, SPI Data |","method":"table","fragment":"functions_pinmap.json","table_id":"4_1"},"signal":"FSPICS0","category":"spi"},{"alt":"F0","src":{"page":20,"quote":"| 16 | GPIO10 |  | GPIO10 | … | GPIO10 | … | FSPICS0 |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO10","signal":"GPIO10","category":"gpio"},{"src":{"page":20,"quote":"| 16 | GPIO10 |  | GPIO10 | … | GPIO10 | … | FSPICS0 |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO10","signal":"GPIO matrix (any routable peripheral signal)","category":"gpio_matrix"}],"electrical":{"ioh":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOH | High-level source current (VDD 1 = 3.3 V, VOH >= 2.64 V, PAD_DRIVER = 3) | — | 40 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.04,"via":"chip u1 GPIO10","orig":{"typ":40,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"High-level source current","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3"}],"iol":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOL | Low-level sink current (VDD 1 = 3.3 V, VOL = 0.495 V, PAD_DRIVER = 3) | — | 28 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.028,"via":"chip u1 GPIO10","orig":{"typ":28,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Low-level sink current","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3"}],"vih":[{"max":3.6,"min":2.475,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO10","unit":"V","symbol":"VIH","category":"characteristic","parameter":"High-level input voltage","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3"}],"vil":[{"max":0.825,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIL | Low-level input voltage | –0.3 | — | 1 0.25 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO10","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Low-level input voltage","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD"}],"voh":[{"min":2.64,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOH | High-level output voltage | 1 0.8 × VDD | — | — | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO10","unit":"V","symbol":"VOH","category":"characteristic","parameter":"High-level output voltage","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD"}],"vol":[{"max":0.33,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOL | Low-level output voltage | — | — | 1 0.1 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO10","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Low-level output voltage","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD"}],"pull_up":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PU | Internal weak pull-up resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO10","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Internal weak pull-up resistor","conditions":"VDD=3.3V; 25 °C"}],"pull_down":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PD | Internal weak pull-down resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO10","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Internal weak pull-down resistor","conditions":"VDD=3.3V; 25 °C"}],"io_voltage":[{"src":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"U4 pins 11/17/31/32 net VCC_3V3","method":"derived","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level (ESP32-C3 VDD3P3 = VCC_3V3)"}],"input_leakage":[{"max":5e-8,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IIH | High-level input current | — | — | 50 | nA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO10","orig":{"max":50,"unit":"nA"},"unit":"A","symbol":"IIH/IIL","category":"characteristic","parameter":"High/low-level input current","conditions":"VDD=3.3V; 25 °C"}],"abs_max_voltage":[{"max":3.6,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | … | VDD 1 + 0.3 | V |; | Input power pins 1 | Allowed input voltage | –0.3 | 3.6 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO10","unit":"V","category":"absolute_max","parameter":"IO input voltage (from VIH max)","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V"}],"input_capacitance":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| CIN | Pin capacitance | — | 2 | — | pF |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0,"via":"chip u1 GPIO10","orig":{"typ":2,"unit":"pF"},"unit":"F","symbol":"CIN","category":"characteristic","parameter":"Pin capacitance","conditions":"VDD=3.3V; 25 °C"}],"five_volt_tolerant":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO10","value":false,"category":"absolute_max","parameter":"5 V tolerant","conditions":"inputs limited to VDD + 0.3 V"}]},"entity_type":"pin"},{"id":"12","attrs":{"net":"VCC_3V3","pad":"5","kind":"power_out","label":"3V3","position":"12","connector":"J1","designator":"12","castellated":true,"description":"3V3_OUT regulated output"},"sources":[{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 5 net VCC_3V3","method":"table","fragment":"entities_edge.json"},{"page":4,"quote":"| 3V3 | 3V3_OUT |  |  | Power Output |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"}],"attr_src":{"net":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 5 net VCC_3V3","method":"table","fragment":"entities_edge.json"},"pad":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 5 net VCC_3V3","method":"table","fragment":"entities_edge.json"},"kind":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 5 net VCC_3V3","method":"table","fragment":"entities_edge.json"},"label":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 5 net VCC_3V3","method":"table","fragment":"entities_edge.json"},"position":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 5 net VCC_3V3","method":"table","fragment":"entities_edge.json"},"connector":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 5 net VCC_3V3","method":"table","fragment":"entities_edge.json"},"designator":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 5 net VCC_3V3","method":"table","fragment":"entities_edge.json"},"castellated":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 5 net VCC_3V3","method":"table","fragment":"entities_edge.json"},"description":{"page":4,"quote":"| 3V3 | 3V3_OUT |  |  | Power Output |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"}},"functions":[],"electrical":{"output_current":[{"max":0.5,"src":{"page":2,"quote":"| Power(Typ.) | Max 3.3V Output Current: 500mA Test Condition: BAT Pin Input @ 3.8V Source Capability: 3A Charging current: 380mA(Fast) / 40mA(Trickle) Input voltage (VIN): 5V Input voltage (BAT): 3.7V |","method":"table","fragment":"ratings_board.json","table_id":"2_1"},"via":"direct","orig":{"max":500,"unit":"mA"},"unit":"A","category":"operating","parameter":"Max 3.3V output current","conditions":"test: BAT pin input @ 3.8 V (spec table); wiki text says 700 mA"},{"max":0.7,"src":{"page":4,"quote":"- 3V3 - This is the regulated output from the onboard regulator. You can draw 700mA","method":"text","fragment":"ratings_board.json"},"via":"direct","orig":{"max":700,"unit":"mA"},"unit":"A","category":"operating","parameter":"3V3 pin draw (wiki text)","conditions":"power-pins text — disagrees with the 500 mA spec-table value"}],"output_voltage":[{"src":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"U2 TLV75733PDBVR pin 5 net VCC_3V3","method":"derived","fragment":"ratings_board.json"},"typ":3.3,"via":"direct","unit":"V","category":"operating","parameter":"3V3 regulated output","conditions":"TLV75733P LDO"}]},"entity_type":"pin"},{"id":"13","attrs":{"net":"GND","pad":"6","kind":"ground","label":"GND","position":"13","connector":"J1","designator":"13","castellated":true},"sources":[{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 6 net GND","method":"table","fragment":"entities_edge.json"}],"attr_src":{"net":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 6 net GND","method":"table","fragment":"entities_edge.json"},"pad":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 6 net GND","method":"table","fragment":"entities_edge.json"},"kind":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 6 net GND","method":"table","fragment":"entities_edge.json"},"label":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 6 net GND","method":"table","fragment":"entities_edge.json"},"position":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 6 net GND","method":"table","fragment":"entities_edge.json"},"connector":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 6 net GND","method":"table","fragment":"entities_edge.json"},"designator":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 6 net GND","method":"table","fragment":"entities_edge.json"},"castellated":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 6 net GND","method":"table","fragment":"entities_edge.json"}},"functions":[],"electrical":{},"entity_type":"pin"},{"id":"14","attrs":{"net":"VUSB","pad":"7","kind":"power_in","label":"5V","position":"14","connector":"J1","designator":"14","castellated":true,"description":"VBUS; 5 V from USB, may be used as input through a diode"},"sources":[{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 7 net VUSB","method":"table","fragment":"entities_edge.json"},{"page":4,"quote":"| 5V | VBUS |  |  | Power Input/Output |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"}],"attr_src":{"net":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 7 net VUSB","method":"table","fragment":"entities_edge.json"},"pad":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 7 net VUSB","method":"table","fragment":"entities_edge.json"},"kind":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 7 net VUSB","method":"table","fragment":"entities_edge.json"},"label":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 7 net VUSB","method":"table","fragment":"entities_edge.json"},"position":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 7 net VUSB","method":"table","fragment":"entities_edge.json"},"connector":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 7 net VUSB","method":"table","fragment":"entities_edge.json"},"designator":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 7 net VUSB","method":"table","fragment":"entities_edge.json"},"castellated":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"J1 pad 7 net VUSB","method":"table","fragment":"entities_edge.json"},"description":{"page":4,"quote":"| 5V | VBUS |  |  | Power Input/Output |","method":"table","fragment":"entities_pinmap.json","table_id":"4_1"}},"functions":[],"electrical":{"input_voltage":[{"src":{"page":2,"quote":"| Power(Typ.) | Max 3.3V Output Current: 500mA Test Condition: BAT Pin Input @ 3.8V Source Capability: 3A Charging current: 380mA(Fast) / 40mA(Trickle) Input voltage (VIN): 5V Input voltage (BAT): 3.7V |","method":"table","fragment":"ratings_board.json","table_id":"2_1"},"typ":5,"via":"direct","unit":"V","category":"operating","parameter":"Input voltage (VIN)","conditions":"USB/5V pin; external supply through a diode"}],"input_current_limit":[{"max":0.5,"src":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"F1 6V_500mA_Fuse VUSB","method":"table","fragment":"ratings_board.json"},"via":"direct","orig":{"max":500,"unit":"mA"},"unit":"A","category":"absolute_max","parameter":"USB input fuse","conditions":"F1 6 V 500 mA fuse on VUSB"}]},"entity_type":"pin"},{"id":"TP1","attrs":{"net":"GND","kind":"ground","label":"TP1","position":"TP1","connector":"bottom_pads","designator":"TP1","description":"test point on net GND"},"sources":[{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP1 pad T net GND","method":"table","fragment":"entities_bottom.json"}],"attr_src":{"net":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP1 pad T net GND","method":"table","fragment":"entities_bottom.json"},"kind":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP1 pad T net GND","method":"table","fragment":"entities_bottom.json"},"label":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP1 pad T net GND","method":"table","fragment":"entities_bottom.json"},"position":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP1 pad T net GND","method":"table","fragment":"entities_bottom.json"},"connector":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP1 pad T net GND","method":"table","fragment":"entities_bottom.json"},"designator":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP1 pad T net GND","method":"table","fragment":"entities_bottom.json"},"description":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP1 pad T net GND","method":"table","fragment":"entities_bottom.json"}},"functions":[],"electrical":{},"entity_type":"pin"},{"id":"TP2","attrs":{"net":"D2","kind":"gpio","label":"TP2","number":9,"position":"TP2","connector":"bottom_pads","designator":"TP2","description":"test point on net D2","power_domain":"VDD3P3_RTC"},"sources":[{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP2 pad T net D2","method":"table","fragment":"entities_bottom.json"}],"attr_src":{"net":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP2 pad T net D2","method":"table","fragment":"entities_bottom.json"},"kind":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP2 pad T net D2","method":"table","fragment":"entities_bottom.json"},"label":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP2 pad T net D2","method":"table","fragment":"entities_bottom.json"},"number":{"via":"chip u1 GPIO4","method":"chip_link"},"position":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP2 pad T net D2","method":"table","fragment":"entities_bottom.json"},"connector":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP2 pad T net D2","method":"table","fragment":"entities_bottom.json"},"designator":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP2 pad T net D2","method":"table","fragment":"entities_bottom.json"},"description":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP2 pad T net D2","method":"table","fragment":"entities_bottom.json"},"power_domain":{"via":"chip u1 GPIO4","method":"chip_link"}},"chip_pin":{"pin":"GPIO4","method":"rule","chip_id":"u1"},"functions":[{"alt":"F0","src":{"page":20,"quote":"| 9 | GPIO4 |  | MTMS | … | GPIO4 | … | FSPIHD |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO4","signal":"MTMS","category":"jtag"},{"alt":"F1","src":{"page":20,"quote":"| 9 | GPIO4 |  | MTMS | … | GPIO4 | … | FSPIHD |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO4","signal":"GPIO4","category":"gpio"},{"alt":"F2","src":{"page":20,"quote":"| 9 | GPIO4 |  | MTMS | … | GPIO4 | … | FSPIHD |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO4","signal":"FSPIHD","category":"spi"},{"alt":"analog","src":{"page":20,"quote":"| 9 | GPIO4 |  | MTMS | … | GPIO4 | … | FSPIHD |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO4","signal":"ADC1_CH4","category":"adc"},{"src":{"page":20,"quote":"| 9 | GPIO4 |  | MTMS | … | GPIO4 | … | FSPIHD |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO4","signal":"GPIO matrix (any routable peripheral signal)","category":"gpio_matrix"}],"electrical":{"ioh":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOH | High-level source current (VDD 1 = 3.3 V, VOH >= 2.64 V, PAD_DRIVER = 3) | — | 40 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.04,"via":"chip u1 GPIO4","orig":{"typ":40,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"High-level source current","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3"}],"iol":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOL | Low-level sink current (VDD 1 = 3.3 V, VOL = 0.495 V, PAD_DRIVER = 3) | — | 28 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.028,"via":"chip u1 GPIO4","orig":{"typ":28,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Low-level sink current","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3"}],"vih":[{"max":3.6,"min":2.475,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO4","unit":"V","symbol":"VIH","category":"characteristic","parameter":"High-level input voltage","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3"}],"vil":[{"max":0.825,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIL | Low-level input voltage | –0.3 | — | 1 0.25 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO4","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Low-level input voltage","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD"}],"voh":[{"min":2.64,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOH | High-level output voltage | 1 0.8 × VDD | — | — | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO4","unit":"V","symbol":"VOH","category":"characteristic","parameter":"High-level output voltage","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD"}],"vol":[{"max":0.33,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOL | Low-level output voltage | — | — | 1 0.1 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO4","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Low-level output voltage","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD"}],"pull_up":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PU | Internal weak pull-up resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO4","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Internal weak pull-up resistor","conditions":"VDD=3.3V; 25 °C"}],"pull_down":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PD | Internal weak pull-down resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO4","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Internal weak pull-down resistor","conditions":"VDD=3.3V; 25 °C"}],"io_voltage":[{"src":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"U4 pins 11/17/31/32 net VCC_3V3","method":"derived","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level (ESP32-C3 VDD3P3 = VCC_3V3)"}],"input_leakage":[{"max":5e-8,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IIH | High-level input current | — | — | 50 | nA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO4","orig":{"max":50,"unit":"nA"},"unit":"A","symbol":"IIH/IIL","category":"characteristic","parameter":"High/low-level input current","conditions":"VDD=3.3V; 25 °C"}],"abs_max_voltage":[{"max":3.6,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | … | VDD 1 + 0.3 | V |; | Input power pins 1 | Allowed input voltage | –0.3 | 3.6 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO4","unit":"V","category":"absolute_max","parameter":"IO input voltage (from VIH max)","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V"}],"adc_input_range":[{"max":2.5,"min":0,"src":{"doc":"ESP32-C3 datasheet","page":56,"quote":"|  | ATTEN3, effective measurement range of 0 ~ 2500 | –35 | 35 | mV |","method":"table","fragment":"ratings_pins.json","table_id":"56_2"},"via":"chip u1 GPIO4","orig":{"max":2500,"min":0,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"ADC effective measurement range (ATTEN3)","conditions":"ADC-capable GPIO0–GPIO5 only; ATTEN3; total error ±35 mV"}],"input_capacitance":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| CIN | Pin capacitance | — | 2 | — | pF |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0,"via":"chip u1 GPIO4","orig":{"typ":2,"unit":"pF"},"unit":"F","symbol":"CIN","category":"characteristic","parameter":"Pin capacitance","conditions":"VDD=3.3V; 25 °C"}],"five_volt_tolerant":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO4","value":false,"category":"absolute_max","parameter":"5 V tolerant","conditions":"inputs limited to VDD + 0.3 V"}]},"entity_type":"pin"},{"id":"TP3","attrs":{"net":"D3","kind":"gpio","label":"TP3","number":10,"position":"TP3","connector":"bottom_pads","designator":"TP3","description":"test point on net D3","power_domain":"VDD3P3_RTC"},"sources":[{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP3 pad T net D3","method":"table","fragment":"entities_bottom.json"}],"attr_src":{"net":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP3 pad T net D3","method":"table","fragment":"entities_bottom.json"},"kind":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP3 pad T net D3","method":"table","fragment":"entities_bottom.json"},"label":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP3 pad T net D3","method":"table","fragment":"entities_bottom.json"},"number":{"via":"chip u1 GPIO5","method":"chip_link"},"position":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP3 pad T net D3","method":"table","fragment":"entities_bottom.json"},"connector":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP3 pad T net D3","method":"table","fragment":"entities_bottom.json"},"designator":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP3 pad T net D3","method":"table","fragment":"entities_bottom.json"},"description":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP3 pad T net D3","method":"table","fragment":"entities_bottom.json"},"power_domain":{"via":"chip u1 GPIO5","method":"chip_link"}},"chip_pin":{"pin":"GPIO5","method":"rule","chip_id":"u1"},"functions":[{"alt":"F0","src":{"page":20,"quote":"| 10 | GPIO5 |  | MTDI | … | GPIO5 | … | FSPIWP |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO5","signal":"MTDI","category":"jtag"},{"alt":"F1","src":{"page":20,"quote":"| 10 | GPIO5 |  | MTDI | … | GPIO5 | … | FSPIWP |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO5","signal":"GPIO5","category":"gpio"},{"alt":"F2","src":{"page":20,"quote":"| 10 | GPIO5 |  | MTDI | … | GPIO5 | … | FSPIWP |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO5","signal":"FSPIWP","category":"spi"},{"alt":"analog","src":{"page":20,"quote":"| 10 | GPIO5 |  | MTDI | … | GPIO5 | … | FSPIWP |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO5","signal":"ADC2_CH0","category":"adc"},{"src":{"page":20,"quote":"| 10 | GPIO5 |  | MTDI | … | GPIO5 | … | FSPIWP |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO5","signal":"GPIO matrix (any routable peripheral signal)","category":"gpio_matrix"}],"electrical":{"ioh":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOH | High-level source current (VDD 1 = 3.3 V, VOH >= 2.64 V, PAD_DRIVER = 3) | — | 40 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.04,"via":"chip u1 GPIO5","orig":{"typ":40,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"High-level source current","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3"}],"iol":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOL | Low-level sink current (VDD 1 = 3.3 V, VOL = 0.495 V, PAD_DRIVER = 3) | — | 28 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.028,"via":"chip u1 GPIO5","orig":{"typ":28,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Low-level sink current","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3"}],"vih":[{"max":3.6,"min":2.475,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO5","unit":"V","symbol":"VIH","category":"characteristic","parameter":"High-level input voltage","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3"}],"vil":[{"max":0.825,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIL | Low-level input voltage | –0.3 | — | 1 0.25 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO5","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Low-level input voltage","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD"}],"voh":[{"min":2.64,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOH | High-level output voltage | 1 0.8 × VDD | — | — | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO5","unit":"V","symbol":"VOH","category":"characteristic","parameter":"High-level output voltage","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD"}],"vol":[{"max":0.33,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOL | Low-level output voltage | — | — | 1 0.1 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO5","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Low-level output voltage","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD"}],"pull_up":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PU | Internal weak pull-up resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO5","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Internal weak pull-up resistor","conditions":"VDD=3.3V; 25 °C"}],"pull_down":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PD | Internal weak pull-down resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO5","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Internal weak pull-down resistor","conditions":"VDD=3.3V; 25 °C"}],"io_voltage":[{"src":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"U4 pins 11/17/31/32 net VCC_3V3","method":"derived","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level (ESP32-C3 VDD3P3 = VCC_3V3)"}],"input_leakage":[{"max":5e-8,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IIH | High-level input current | — | — | 50 | nA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO5","orig":{"max":50,"unit":"nA"},"unit":"A","symbol":"IIH/IIL","category":"characteristic","parameter":"High/low-level input current","conditions":"VDD=3.3V; 25 °C"}],"abs_max_voltage":[{"max":3.6,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | … | VDD 1 + 0.3 | V |; | Input power pins 1 | Allowed input voltage | –0.3 | 3.6 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO5","unit":"V","category":"absolute_max","parameter":"IO input voltage (from VIH max)","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V"}],"adc_input_range":[{"max":2.5,"min":0,"src":{"doc":"ESP32-C3 datasheet","page":56,"quote":"|  | ATTEN3, effective measurement range of 0 ~ 2500 | –35 | 35 | mV |","method":"table","fragment":"ratings_pins.json","table_id":"56_2"},"via":"chip u1 GPIO5","orig":{"max":2500,"min":0,"unit":"mV"},"unit":"V","category":"characteristic","parameter":"ADC effective measurement range (ATTEN3)","conditions":"ADC-capable GPIO0–GPIO5 only; ATTEN3; total error ±35 mV"}],"input_capacitance":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| CIN | Pin capacitance | — | 2 | — | pF |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0,"via":"chip u1 GPIO5","orig":{"typ":2,"unit":"pF"},"unit":"F","symbol":"CIN","category":"characteristic","parameter":"Pin capacitance","conditions":"VDD=3.3V; 25 °C"}],"five_volt_tolerant":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO5","value":false,"category":"absolute_max","parameter":"5 V tolerant","conditions":"inputs limited to VDD + 0.3 V"}]},"entity_type":"pin"},{"id":"TP4","attrs":{"net":"D4","kind":"gpio","label":"TP4","number":12,"position":"TP4","connector":"bottom_pads","designator":"TP4","description":"test point on net D4","power_domain":"VDD3P3_CPU"},"sources":[{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP4 pad T net D4","method":"table","fragment":"entities_bottom.json"}],"attr_src":{"net":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP4 pad T net D4","method":"table","fragment":"entities_bottom.json"},"kind":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP4 pad T net D4","method":"table","fragment":"entities_bottom.json"},"label":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP4 pad T net D4","method":"table","fragment":"entities_bottom.json"},"number":{"via":"chip u1 GPIO6","method":"chip_link"},"position":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP4 pad T net D4","method":"table","fragment":"entities_bottom.json"},"connector":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP4 pad T net D4","method":"table","fragment":"entities_bottom.json"},"designator":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP4 pad T net D4","method":"table","fragment":"entities_bottom.json"},"description":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP4 pad T net D4","method":"table","fragment":"entities_bottom.json"},"power_domain":{"via":"chip u1 GPIO6","method":"chip_link"}},"chip_pin":{"pin":"GPIO6","method":"rule","chip_id":"u1"},"functions":[{"alt":"F0","src":{"page":20,"quote":"| 12 | GPIO6 |  | MTCK | … | GPIO6 | … | FSPICLK |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO6","signal":"MTCK","category":"jtag"},{"alt":"F1","src":{"page":20,"quote":"| 12 | GPIO6 |  | MTCK | … | GPIO6 | … | FSPICLK |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO6","signal":"GPIO6","category":"gpio"},{"alt":"F2","src":{"page":20,"quote":"| 12 | GPIO6 |  | MTCK | … | GPIO6 | … | FSPICLK |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO6","signal":"FSPICLK","category":"spi"},{"src":{"page":20,"quote":"| 12 | GPIO6 |  | MTCK | … | GPIO6 | … | FSPICLK |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO6","signal":"GPIO matrix (any routable peripheral signal)","category":"gpio_matrix"}],"electrical":{"ioh":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOH | High-level source current (VDD 1 = 3.3 V, VOH >= 2.64 V, PAD_DRIVER = 3) | — | 40 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.04,"via":"chip u1 GPIO6","orig":{"typ":40,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"High-level source current","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3"}],"iol":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOL | Low-level sink current (VDD 1 = 3.3 V, VOL = 0.495 V, PAD_DRIVER = 3) | — | 28 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.028,"via":"chip u1 GPIO6","orig":{"typ":28,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Low-level sink current","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3"}],"vih":[{"max":3.6,"min":2.475,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO6","unit":"V","symbol":"VIH","category":"characteristic","parameter":"High-level input voltage","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3"}],"vil":[{"max":0.825,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIL | Low-level input voltage | –0.3 | — | 1 0.25 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO6","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Low-level input voltage","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD"}],"voh":[{"min":2.64,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOH | High-level output voltage | 1 0.8 × VDD | — | — | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO6","unit":"V","symbol":"VOH","category":"characteristic","parameter":"High-level output voltage","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD"}],"vol":[{"max":0.33,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOL | Low-level output voltage | — | — | 1 0.1 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO6","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Low-level output voltage","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD"}],"pull_up":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PU | Internal weak pull-up resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO6","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Internal weak pull-up resistor","conditions":"VDD=3.3V; 25 °C"}],"pull_down":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PD | Internal weak pull-down resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO6","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Internal weak pull-down resistor","conditions":"VDD=3.3V; 25 °C"}],"io_voltage":[{"src":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"U4 pins 11/17/31/32 net VCC_3V3","method":"derived","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level (ESP32-C3 VDD3P3 = VCC_3V3)"}],"input_leakage":[{"max":5e-8,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IIH | High-level input current | — | — | 50 | nA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO6","orig":{"max":50,"unit":"nA"},"unit":"A","symbol":"IIH/IIL","category":"characteristic","parameter":"High/low-level input current","conditions":"VDD=3.3V; 25 °C"}],"abs_max_voltage":[{"max":3.6,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | … | VDD 1 + 0.3 | V |; | Input power pins 1 | Allowed input voltage | –0.3 | 3.6 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO6","unit":"V","category":"absolute_max","parameter":"IO input voltage (from VIH max)","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V"}],"input_capacitance":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| CIN | Pin capacitance | — | 2 | — | pF |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0,"via":"chip u1 GPIO6","orig":{"typ":2,"unit":"pF"},"unit":"F","symbol":"CIN","category":"characteristic","parameter":"Pin capacitance","conditions":"VDD=3.3V; 25 °C"}],"five_volt_tolerant":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO6","value":false,"category":"absolute_max","parameter":"5 V tolerant","conditions":"inputs limited to VDD + 0.3 V"}]},"entity_type":"pin"},{"id":"TP5","attrs":{"net":"D5","kind":"gpio","label":"TP5","number":13,"position":"TP5","connector":"bottom_pads","designator":"TP5","description":"test point on net D5","power_domain":"VDD3P3_CPU"},"sources":[{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP5 pad T net D5","method":"table","fragment":"entities_bottom.json"}],"attr_src":{"net":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP5 pad T net D5","method":"table","fragment":"entities_bottom.json"},"kind":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP5 pad T net D5","method":"table","fragment":"entities_bottom.json"},"label":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP5 pad T net D5","method":"table","fragment":"entities_bottom.json"},"number":{"via":"chip u1 GPIO7","method":"chip_link"},"position":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP5 pad T net D5","method":"table","fragment":"entities_bottom.json"},"connector":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP5 pad T net D5","method":"table","fragment":"entities_bottom.json"},"designator":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP5 pad T net D5","method":"table","fragment":"entities_bottom.json"},"description":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP5 pad T net D5","method":"table","fragment":"entities_bottom.json"},"power_domain":{"via":"chip u1 GPIO7","method":"chip_link"}},"chip_pin":{"pin":"GPIO7","method":"rule","chip_id":"u1"},"functions":[{"alt":"F0","src":{"page":20,"quote":"| 13 | GPIO7 |  | MTDO | … | GPIO7 | … | FSPID |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO7","signal":"MTDO","category":"jtag"},{"alt":"F1","src":{"page":20,"quote":"| 13 | GPIO7 |  | MTDO | … | GPIO7 | … | FSPID |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO7","signal":"GPIO7","category":"gpio"},{"alt":"F2","src":{"page":20,"quote":"| 13 | GPIO7 |  | MTDO | … | GPIO7 | … | FSPID |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO7","signal":"FSPID","category":"spi"},{"src":{"page":20,"quote":"| 13 | GPIO7 |  | MTDO | … | GPIO7 | … | FSPID |","method":"table","fragment":"functions_iomux.json","table_id":"20_1"},"via":"chip u1 GPIO7","signal":"GPIO matrix (any routable peripheral signal)","category":"gpio_matrix"}],"electrical":{"ioh":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOH | High-level source current (VDD 1 = 3.3 V, VOH >= 2.64 V, PAD_DRIVER = 3) | — | 40 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.04,"via":"chip u1 GPIO7","orig":{"typ":40,"unit":"mA"},"unit":"A","symbol":"IOH","category":"characteristic","parameter":"High-level source current","conditions":"VDD=3.3V; 25 °C; VOH ≥ 2.64 V, PAD_DRIVER = 3"}],"iol":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IOL | Low-level sink current (VDD 1 = 3.3 V, VOL = 0.495 V, PAD_DRIVER = 3) | — | 28 | — | mA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0.028,"via":"chip u1 GPIO7","orig":{"typ":28,"unit":"mA"},"unit":"A","symbol":"IOL","category":"characteristic","parameter":"Low-level sink current","conditions":"VDD=3.3V; 25 °C; VOL = 0.495 V, PAD_DRIVER = 3"}],"vih":[{"max":3.6,"min":2.475,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO7","unit":"V","symbol":"VIH","category":"characteristic","parameter":"High-level input voltage","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3"}],"vil":[{"max":0.825,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIL | Low-level input voltage | –0.3 | — | 1 0.25 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO7","unit":"V","symbol":"VIL","category":"characteristic","parameter":"Low-level input voltage","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD"}],"voh":[{"min":2.64,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOH | High-level output voltage | 1 0.8 × VDD | — | — | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO7","unit":"V","symbol":"VOH","category":"characteristic","parameter":"High-level output voltage","conditions":"VDD=3.3V; 25 °C; min = 0.8 × VDD"}],"vol":[{"max":0.33,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| 2 VOL | Low-level output voltage | — | — | 1 0.1 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO7","unit":"V","symbol":"VOL","category":"characteristic","parameter":"Low-level output voltage","conditions":"VDD=3.3V; 25 °C; max = 0.1 × VDD"}],"pull_up":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PU | Internal weak pull-up resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO7","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPU","category":"characteristic","parameter":"Internal weak pull-up resistor","conditions":"VDD=3.3V; 25 °C"}],"pull_down":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| R PD | Internal weak pull-down resistor | — | 45 | — | kΩ |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":45000,"via":"chip u1 GPIO7","orig":{"typ":45,"unit":"kΩ"},"unit":"ohm","symbol":"RPD","category":"characteristic","parameter":"Internal weak pull-down resistor","conditions":"VDD=3.3V; 25 °C"}],"io_voltage":[{"src":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"U4 pins 11/17/31/32 net VCC_3V3","method":"derived","fragment":"ratings_board.json"},"via":"group:io","unit":"V","value":3.3,"category":"operating","parameter":"GPIO level (ESP32-C3 VDD3P3 = VCC_3V3)"}],"input_leakage":[{"max":5e-8,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| IIH | High-level input current | — | — | 50 | nA |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO7","orig":{"max":50,"unit":"nA"},"unit":"A","symbol":"IIH/IIL","category":"characteristic","parameter":"High/low-level input current","conditions":"VDD=3.3V; 25 °C"}],"abs_max_voltage":[{"max":3.6,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | … | VDD 1 + 0.3 | V |; | Input power pins 1 | Allowed input voltage | –0.3 | 3.6 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO7","unit":"V","category":"absolute_max","parameter":"IO input voltage (from VIH max)","conditions":"VDD + 0.3 V at VDD = 3.3 V; power pins abs-max −0.3…3.6 V"}],"input_capacitance":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| CIN | Pin capacitance | — | 2 | — | pF |","method":"table","fragment":"ratings_pins.json","table_id":"55_2"},"typ":0,"via":"chip u1 GPIO7","orig":{"typ":2,"unit":"pF"},"unit":"F","symbol":"CIN","category":"characteristic","parameter":"Pin capacitance","conditions":"VDD=3.3V; 25 °C"}],"five_volt_tolerant":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH | High-level input voltage | 1 0.75 × VDD | — | VDD 1 + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 GPIO7","value":false,"category":"absolute_max","parameter":"5 V tolerant","conditions":"inputs limited to VDD + 0.3 V"}]},"entity_type":"pin"},{"id":"TP6","attrs":{"net":"EN","kind":"control","label":"TP6","number":7,"position":"TP6","connector":"bottom_pads","designator":"TP6","description":"test point on net EN"},"sources":[{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP6 pad T net EN","method":"table","fragment":"entities_bottom.json"}],"attr_src":{"net":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP6 pad T net EN","method":"table","fragment":"entities_bottom.json"},"kind":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP6 pad T net EN","method":"table","fragment":"entities_bottom.json"},"label":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP6 pad T net EN","method":"table","fragment":"entities_bottom.json"},"number":{"via":"chip u1 CHIP_EN","method":"chip_link"},"position":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP6 pad T net EN","method":"table","fragment":"entities_bottom.json"},"connector":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP6 pad T net EN","method":"table","fragment":"entities_bottom.json"},"designator":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP6 pad T net EN","method":"table","fragment":"entities_bottom.json"},"description":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"TP6 pad T net EN","method":"table","fragment":"entities_bottom.json"}},"chip_pin":{"pin":"CHIP_EN","method":"rule","chip_id":"u1"},"functions":[],"electrical":{"vih":[{"max":3.6,"min":2.475,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH_nRST | Chip reset release voltage | 1 0.75 × VDD | — | 1 VDD + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 CHIP_EN","unit":"V","category":"characteristic","parameter":"Chip reset release voltage (CHIP_EN)","conditions":"VDD=3.3V; 25 °C; 0.75 × VDD to VDD + 0.3"}],"vil":[{"max":0.825,"min":-0.3,"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIL_nRST | Chip reset voltage | –0.3 | — | 1 0.25 × VDD | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 CHIP_EN","unit":"V","category":"characteristic","parameter":"Chip reset voltage (CHIP_EN)","conditions":"VDD=3.3V; 25 °C; max = 0.25 × VDD"}],"pull_up_external":[{"src":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"R4 10k EN VCC_3V3; C5 100nF EN","method":"table","fragment":"ratings_board.json"},"typ":10000,"via":"direct","orig":{"typ":10,"unit":"kΩ"},"unit":"ohm","category":"characteristic","parameter":"External pull-up R4 to 3V3 on EN","conditions":"with C5 100 nF RC reset; RESET button to GND"}],"five_volt_tolerant":[{"src":{"doc":"ESP32-C3 datasheet","page":55,"quote":"| VIH_nRST | … | 1 VDD + 0.3 | V |","method":"derived","fragment":"ratings_pins.json","table_id":"55_2"},"via":"chip u1 CHIP_EN","value":false,"category":"absolute_max","parameter":"5 V tolerant","conditions":"CHIP_EN ≤ VDD + 0.3 V"}]},"entity_type":"pin"},{"id":"BAT+","attrs":{"net":"VBAT","kind":"power_in","label":"BAT+","position":"BAT+","connector":"bottom_pads","designator":"BAT+","description":"battery positive (3.7 V Li-ion)"},"sources":[{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"BAT0 pad 1 net VBAT","method":"table","fragment":"entities_bottom.json"}],"attr_src":{"net":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"BAT0 pad 1 net VBAT","method":"table","fragment":"entities_bottom.json"},"kind":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"BAT0 pad 1 net VBAT","method":"table","fragment":"entities_bottom.json"},"label":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"BAT0 pad 1 net VBAT","method":"table","fragment":"entities_bottom.json"},"position":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"BAT0 pad 1 net VBAT","method":"table","fragment":"entities_bottom.json"},"connector":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"BAT0 pad 1 net VBAT","method":"table","fragment":"entities_bottom.json"},"designator":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"BAT0 pad 1 net VBAT","method":"table","fragment":"entities_bottom.json"},"description":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"BAT0 pad 1 net VBAT","method":"table","fragment":"entities_bottom.json"}},"functions":[],"electrical":{"input_voltage":[{"src":{"page":2,"quote":"| Power(Typ.) | Max 3.3V Output Current: 500mA Test Condition: BAT Pin Input @ 3.8V Source Capability: 3A Charging current: 380mA(Fast) / 40mA(Trickle) Input voltage (VIN): 5V Input voltage (BAT): 3.7V |","method":"table","fragment":"ratings_board.json","table_id":"2_1"},"typ":3.7,"via":"direct","unit":"V","category":"operating","parameter":"Input voltage (BAT)","conditions":"3.7 V lithium battery"}],"charge_current":[{"src":{"page":2,"quote":"| Power(Typ.) | Max 3.3V Output Current: 500mA Test Condition: BAT Pin Input @ 3.8V Source Capability: 3A Charging current: 380mA(Fast) / 40mA(Trickle) Input voltage (VIN): 5V Input voltage (BAT): 3.7V |","method":"table","fragment":"ratings_board.json","table_id":"2_1"},"typ":0.38,"via":"direct","orig":{"typ":380,"unit":"mA"},"unit":"A","category":"operating","parameter":"Charging current","conditions":"fast; trickle 40 mA"}]},"entity_type":"pin"},{"id":"GND_PAD","attrs":{"net":"GND","kind":"ground","label":"GND","position":"GND pad","connector":"bottom_pads","designator":"GND_PAD","description":"bottom ground pad (battery negative)"},"sources":[{"url":"https://files.seeedstudio.com/wiki/Seeed-Studio-XIAO-ESP32/XIAO_ESP32C3_v1.2_Dimensioning.zip","quote":"GND pad 2.7940 × 2.7940","method":"drawing","fragment":"entities_bottom.json"}],"attr_src":{"net":{"url":"https://files.seeedstudio.com/wiki/Seeed-Studio-XIAO-ESP32/XIAO_ESP32C3_v1.2_Dimensioning.zip","quote":"GND pad 2.7940 × 2.7940","method":"drawing","fragment":"entities_bottom.json"},"kind":{"url":"https://files.seeedstudio.com/wiki/Seeed-Studio-XIAO-ESP32/XIAO_ESP32C3_v1.2_Dimensioning.zip","quote":"GND pad 2.7940 × 2.7940","method":"drawing","fragment":"entities_bottom.json"},"label":{"url":"https://files.seeedstudio.com/wiki/Seeed-Studio-XIAO-ESP32/XIAO_ESP32C3_v1.2_Dimensioning.zip","quote":"GND pad 2.7940 × 2.7940","method":"drawing","fragment":"entities_bottom.json"},"position":{"url":"https://files.seeedstudio.com/wiki/Seeed-Studio-XIAO-ESP32/XIAO_ESP32C3_v1.2_Dimensioning.zip","quote":"GND pad 2.7940 × 2.7940","method":"drawing","fragment":"entities_bottom.json"},"connector":{"url":"https://files.seeedstudio.com/wiki/Seeed-Studio-XIAO-ESP32/XIAO_ESP32C3_v1.2_Dimensioning.zip","quote":"GND pad 2.7940 × 2.7940","method":"drawing","fragment":"entities_bottom.json"},"designator":{"url":"https://files.seeedstudio.com/wiki/Seeed-Studio-XIAO-ESP32/XIAO_ESP32C3_v1.2_Dimensioning.zip","quote":"GND pad 2.7940 × 2.7940","method":"drawing","fragment":"entities_bottom.json"},"description":{"url":"https://files.seeedstudio.com/wiki/Seeed-Studio-XIAO-ESP32/XIAO_ESP32C3_v1.2_Dimensioning.zip","quote":"GND pad 2.7940 × 2.7940","method":"drawing","fragment":"entities_bottom.json"}},"functions":[],"electrical":{},"entity_type":"pin"}],"taxonomy":{"sleep_modes":{"role":"software_usage","definition":"Deep sleep and wake-up usage examples"},"banner_image":{"role":"other","definition":"Page holding only a product banner image"},"battery_power":{"role":"electrical_ratings","definition":"Battery usage, charging and battery-voltage measurement notes"},"resources_links":{"role":"identity_overview","definition":"Links to datasheet, schematic, KiCad, DXF, 3D model and firmware"},"schematic_sheet":{"role":"identity_overview","definition":"Circuit schematic sheet of the board"},"support_courses":{"role":"other","definition":"Course resources, tech support and community channels"},"introduction_specs":{"role":"identity_overview","definition":"Product introduction and specification table (processor, wireless, memory, interfaces, power, temperature)"},"pin_map_power_strapping":{"role":"pins_or_terminals","definition":"Pin map table (board pin → chip pin, alternate functions), power pin notes, strapping pins"},"getting_started_software":{"role":"software_usage","definition":"Getting started, IDE setup, example code, troubleshooting"},"hardware_overview_images":{"role":"pins_or_terminals","definition":"Hardware overview with front/back pinout images"}},"variants":{},"commercial":{"other":{},"checked_at":"2026-09-24T11:07:26+00:00","compliance":["FCC (FCC ID Z4T-XIAOESP32C3)","CE","TELEC (R 204-B00704)"],"ordering_codes":[{"code":"113991054","description":"Seeed Studio XIAO ESP32-C3"}]},"mechanical":{"dims":{"width":{"src":{"url":"https://files.seeedstudio.com/wiki/Seeed-Studio-XIAO-ESP32/XIAO_ESP32C3_v1.2_Dimensioning.zip","quote":"17.7800","method":"drawing"},"unit":"mm","value":17.78},"length":{"src":{"url":"https://files.seeedstudio.com/wiki/Seeed-Studio-XIAO-ESP32/XIAO_ESP32C3_v1.2_Dimensioning.zip","quote":"20.9550","method":"drawing"},"unit":"mm","value":20.955},"pad_span":{"src":{"url":"https://files.seeedstudio.com/wiki/Seeed-Studio-XIAO-ESP32/XIAO_ESP32C3_v1.2_Dimensioning.zip","quote":"15.2400","method":"drawing"},"unit":"mm","value":15.24},"pad_pitch":{"src":{"url":"https://files.seeedstudio.com/wiki/Seeed-Studio-XIAO-ESP32/XIAO_ESP32C3_v1.2_Dimensioning.zip","quote":"2.5400","method":"drawing"},"unit":"mm","value":2.54},"thickness":{"src":{"url":"https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/XIAO_ESP32C3_v1.3_KiCad_260116.zip","quote":"(general (thickness 1.6))","method":"table"},"note":"KiCad board-setup thickness; the project defines no layer stackup","unit":"mm","value":1.6},"corner_radius":{"src":{"url":"https://files.seeedstudio.com/wiki/Seeed-Studio-XIAO-ESP32/XIAO_ESP32C3_v1.2_Dimensioning.zip","quote":"R1.9063","method":"drawing"},"unit":"mm","value":1.9063}},"kind":"mechanical","holes":[],"units":"mm","origin":"x along the 20.955 mm pad rows (USB end at x = 20.955); y = 0 at the D0–D6 edge; z = 0 PCB bottom","features":[{"h":3.2,"l":7.35,"w":8.94,"x":13.9,"y":4.8,"src":{"page":3,"quote":"USB-C at the top edge","figure":"front view","method":"drawing"},"name":"USB-C receptacle","side":"top","assumed":"USB-C footprint size/height from the UBF31-0171 class receptacle (8.94 × 7.35 × 3.2 mm); position read from the pinout image, overhang ~1.3 mm — not dimensioned in the DXF","overhang":true}],"archetype":"pcb_board","assumptions":{}},"page_index":[{"page":1,"tags":["banner_image"],"primary":"banner_image"},{"page":2,"tags":["introduction_specs"],"primary":"introduction_specs"},{"page":3,"tags":["hardware_overview_images"],"primary":"hardware_overview_images"},{"page":4,"tags":["pin_map_power_strapping"],"primary":"pin_map_power_strapping"},{"page":5,"tags":["getting_started_software"],"primary":"getting_started_software"},{"page":6,"tags":["battery_power"],"primary":"battery_power"},{"page":7,"tags":["sleep_modes"],"primary":"sleep_modes"},{"page":8,"tags":["getting_started_software"],"primary":"getting_started_software"},{"page":9,"tags":["resources_links"],"primary":"resources_links"},{"page":10,"tags":["resources_links","schematic_sheet"],"primary":"resources_links"},{"page":11,"tags":["support_courses"],"primary":"support_courses"},{"page":12,"tags":["support_courses"],"primary":"support_courses"},{"page":13,"tags":["schematic_sheet"],"primary":"schematic_sheet"},{"page":14,"tags":[],"primary":"none_of_these"},{"page":15,"tags":["schematic_sheet"],"primary":"schematic_sheet"}],"performance":[],"schema_name":"datasheet-1","part_ratings":{"input_voltage":[{"src":{"page":2,"quote":"| Power(Typ.) | Max 3.3V Output Current: 500mA Test Condition: BAT Pin Input @ 3.8V Source Capability: 3A Charging current: 380mA(Fast) / 40mA(Trickle) Input voltage (VIN): 5V Input voltage (BAT): 3.7V |","method":"table","fragment":"ratings_board.json","table_id":"2_1"},"typ":5,"unit":"V","category":"operating","parameter":"Input voltage (VIN / USB)","conditions":"battery alternative: 3.7 V on BAT"}],"supply_current":[{"src":{"page":2,"quote":"| Wi-Fi Enabled Power Consumption | Active Mode: 75 mA Modem-sleep Mode: 25 mA Light-sleep Mode: 4 mA |","method":"table","fragment":"ratings_board.json","table_id":"2_1"},"typ":0.075,"orig":{"typ":75,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Wi-Fi active mode"}],"operating_temperature":[{"max":85,"min":-40,"src":{"page":2,"quote":"| Working Temperature | -40°C ~ 85°C |","method":"table","fragment":"ratings_board.json","table_id":"2_1"},"unit":"°C","category":"operating","parameter":"Working Temperature"}],"supply_current_deep_sleep":[{"src":{"page":2,"quote":"| Deep Sleep Power Consumption | Deep Sleep Mode: 44 μA |","method":"table","fragment":"ratings_board.json","table_id":"2_1"},"typ":0.000044,"orig":{"typ":44,"unit":"µA"},"unit":"A","category":"characteristic","parameter":"Deep sleep"}],"supply_current_light_sleep":[{"src":{"page":2,"quote":"| Wi-Fi Enabled Power Consumption | Active Mode: 75 mA Modem-sleep Mode: 25 mA Light-sleep Mode: 4 mA |","method":"table","fragment":"ratings_board.json","table_id":"2_1"},"typ":0.004,"orig":{"typ":4,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Wi-Fi light-sleep"}],"supply_current_modem_sleep":[{"src":{"page":2,"quote":"| Wi-Fi Enabled Power Consumption | Active Mode: 75 mA Modem-sleep Mode: 25 mA Light-sleep Mode: 4 mA |","method":"table","fragment":"ratings_board.json","table_id":"2_1"},"typ":0.025,"orig":{"typ":25,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"Wi-Fi modem-sleep"}],"supply_current_ble_modem_sleep":[{"src":{"page":2,"quote":"| BLE Enabled Power Consumption | Modem-sleep Mode: 27 mA Light-sleep Mode: 10 mA |","method":"table","fragment":"ratings_board.json","table_id":"2_1"},"typ":0.027,"orig":{"typ":27,"unit":"mA"},"unit":"A","category":"characteristic","parameter":"BLE modem-sleep"}]}},"use_cases":["wireless-iot","compact-embedded","learning-prototyping"],"commercial":{"other":{},"checked_at":"2026-09-24T11:07:26+00:00","compliance":["FCC (FCC ID Z4T-XIAOESP32C3)","CE","TELEC (R 204-B00704)"],"ordering_codes":[{"code":"113991054","description":"Seeed Studio XIAO ESP32-C3"}]},"assembly_label":"Development board","assembly_level":3,"search_aliases":["113991054","SeeedStudioXIAOESP32C3"],"children_summary":[{"id":"99bec0e0-dcb0-5a46-81e1-f86f342553dd--mcu","part_number":"ESP32-C3FH4","manufacturer":"Espressif Systems","role":"main_processor","architecture":"32-bit RISC-V single-core","clock_mhz":160,"memory":{"other":{"rom_kb":384},"sram_kb":400}},{"id":"99bec0e0-dcb0-5a46-81e1-f86f342553dd--ldo","part_number":"TLV75733PDBVR","manufacturer":"Texas Instruments","role":"voltage_regulator","architecture":null,"clock_mhz":null,"memory":null}],"design":{"assets":[{"other":{},"kind":"datasheet","url":"https://wiki.seeedstudio.com/XIAO_ESP32C3_Getting_Started/","label":"Datasheet","verification":"manufacturer","notes":null,"resolved_url":"https://wiki.seeedstudio.com/XIAO_ESP32C3_Getting_Started/"},{"other":{},"kind":"image","url":"https://media-cdn.seeedstudio.com/media/catalog/product/cache/7f7f32ef807b8c2c2215b49801c56084/1/-/1-113991054-seeed-studio-xiao-esp32c3-45font_1.jpg","label":"Seeed store photo of XIAO ESP32C3 (113991054)","verification":"manufacturer","notes":"inspected: shows the actual board; saved at work/xiao-esp32c3/images/product.jpg","resolved_url":"https://media-cdn.seeedstudio.com/media/catalog/product/cache/7f7f32ef807b8c2c2215b49801c56084/1/-/1-113991054-seeed-studio-xiao-esp32c3-45font_1.jpg"},{"other":{},"kind":"cad","url":"xiao-esp32c3.step","label":"STEP (generated from datasheet drawing)","verification":"generated","notes":"cad_check passed","resolved_url":"https://wlrumvsjnliyuuvzwnrt.supabase.co/storage/v1/object/public/geometry/xiao-esp32c3.step"}],"cad":{"verification":"generated","envelope_complete":false,"assumptions":["feature USB-C receptacle: USB-C footprint size/height from the UBF31-0171 class receptacle (8.94 × 7.35 × 3.2 mm); position read from the pinout image, overhang ~1.3 mm — not dimensioned in the DXF"],"step_path":"xiao-esp32c3.step","mesh_path":"xiao-esp32c3.stl","footprint_svg_path":null,"bbox":{"length_mm":21.25,"width_mm":17.78,"height_mm":4.8},"features":[],"step_url":"https://wlrumvsjnliyuuvzwnrt.supabase.co/storage/v1/object/public/geometry/xiao-esp32c3.step","mesh_url":"https://wlrumvsjnliyuuvzwnrt.supabase.co/storage/v1/object/public/geometry/xiao-esp32c3.stl","footprint_svg_url":null},"limitations":["Generated geometry is an approximate mechanical envelope; inspect original manufacturer CAD when available.","Generated footprint_svg_path is an outline, not a verified electrical land pattern.","Xirkit does not run fit checks; download step_url and test fit against your own enclosure."]}}}