Camera gimbal stabilization
iPower designs it for small multirotor gimbals with GoPro-sized cameras: 12N14P (7 pole pairs) direct drive, 250–350 g·cm at 10 V / 0.8 A, 39 g. Needs an external three-phase gimbal / FOC driver.
Manufacturer guidance
iPower Motors
iPower GBM2804H-100T Gimbal Motor
iPower (iFlight) GBM2804H-100T is a brushless gimbal motor, 12N14P (7 pole pairs), Ø35 × 15 mm, 39 g, with a hollow shaft of Ø7 mm OD and Ø5 mm ID. Maker tests give 250–350 g·cm at 10 V / 0.8 A and 1468–1622 rpm no-load at 10 V. Winding resistance is 10 Ω and maximum power ≤ 25 W, for 2–3S packs. It is a common SimpleFOC motor.
GBM2804H-100TMotorPrice$18.99shop.iflight.com · in stock
Buy at shop.iflight.com Overview
Motor essentials
Facts about the complete product. Unknown values remain open design questions.
- No-load speed
- 1,622 RPM
- Shaft diameter
- 7 mm
A good fit for
Guidance to help you shortlist. The basis is shown for each recommendation.
Low-current FOC experiments (SimpleFOC)
10 Ω winding draws under 1 A at 10 V, so voltage-mode FOC works without current sensing; the Ø5 mm hollow shaft takes an axial magnet for an AS5600 / AS5048A encoder.
Engineering inferenceNo-load speed, rated performance and stall limits describe different operating points. A stall specification is not a continuous operating rating.
3D model & CAD
3D model & CAD files
Generated from the datasheet's dimensioned drawing and measured against it. Download the STEP to check fit in your own enclosure.
- Envelope (L × W × H)
- 35 × 35 × 15 mm
- Verification
- generated
- Envelope complete
- Yes
Mechanical interface
Mechanical output interface
The motor body, transmission and output shaft have separate roles in a mechanism.
- Motor type
- bldc
- Shaft diameter
- 7 mm
- Body diameter
- 35 mm
- Body length
- 15 mm
- Phases
- 3
Reported body dimensions may exclude the shaft, terminals and other protrusions. Use the manufacturer drawing to establish the complete mounting and clearance envelope.
Specifications
Motor performance
No-load, rated-load and stall figures retain their separate test conditions.
- No-load speed
- 1,622 RPM
- No-load current
- 0.07 A
Stall torque and current are not continuous ratings. Check the duty cycle and starting load when choosing the driver and power supply.
Thermal limits by level
Product operating conditions, chip ambient ratings, package case limits and junction maxima remain separate.
Motor body
- Product operating range
- -20 to 60 °C
Mechanical dimensions
Reported product dimensions may exclude protruding components. Unknown height does not establish a complete clearance envelope.
- Length
- 35 mm
- Width
- 35 mm
- Reported height / thickness
- 15 mm
Attached generated geometry is an approximate envelope. A generated outline does not establish an electrically verified PCB footprint.
Board connectors
| ID / type | Pins | Pitch | Notes |
|---|---|---|---|
| motor_leadsthree bare motor leads, 300 ± 3 mm, AWG 28; no plug fitted | Unknown | Unknown | — |
Complete structured record
Every available field, including details beyond the summaries. Null means the value has not been established.
Sourcing & files
Supplier offers
US / USD is the target market. Observed price and stock are separate from a delivery quote.
shop.iflight.com
US · USD
$18.99Minimum quantity unknown
- Observed stock
- in stock
- Checked
- Oct 18, 2026, 03:04 AM UTC
- Delivery estimate
- Not quoted
This observation is stale or has no verified check time. Recheck with the supplier.
Visit supplier (opens in a new tab)Delivery depends on quantity, postal code and shipping method. A dispatch statement such as “ship today” is not an arrival estimate.
Design files and references
Each source keeps its own verification status. Confirm the part revision and file contents before using it in a design.
Datasheet (opens in a new tab)
Manufacturer reference
iPower GBM2804H-100T gimbal motor — product photo (iFlight store) (opens in a new tab)
Manufacturer reference
inspected: black can printed "iPower Motor Gimbal BL Motor GBM2804H-100T", four holes and a hollow shaft on the top face
STEP (generated from datasheet drawing) — link unavailable
Generated asset
cad_check passed
Generated envelope geometry may also exist for this record. It does not replace manufacturer CAD or a verified electrical land pattern.
Source evidence
Document provenance, retrieval dates and the field groups supported by each source.
Supports: spec.constraints.thermal.operating_temp_max_c, spec.constraints.thermal.operating_temp_min_c, spec.geometry.body_diameter_mm, spec.geometry.body_length_mm, spec.geometry.cad.bbox.height_mm, spec.geometry.cad.bbox.length_mm, spec.geometry.cad.bbox.width_mm, spec.geometry.cad.envelope_complete, spec.geometry.cad.mesh_path, spec.geometry.cad.step_path, spec.geometry.cad.verification, spec.geometry.dimensions.height_mm, spec.geometry.dimensions.length_mm, spec.geometry.dimensions.width_mm, spec.geometry.other.weight_g, spec.geometry.shaft_diameter_mm, spec.provides.features, spec.provides.motor_type, spec.provides.no_load_speed_rpm, spec.provides.output_type, spec.usage.connectors, spec.usage.pinout_complete, spec.usage.requirements.driver_required, spec.usage.requirements.no_load_current_a, spec.usage.requirements.other.winding_resistance_ohm, spec.usage.requirements.phases
sha256 c858a5e595aafff3181353ce940f493fc8896f530c41b462a31ef736e30b0edc
Supports: offers
Related parts
Similar to the iPower GBM2804H-100T Gimbal Motor
DFRobot TT Motor with Encoder 120:1 6VDFRobot · $7.4DJI RoboMaster M2006 P36 Gear MotorDJI (RoboMaster) · $95DJI RoboMaster M3508 P19 Gear MotorDJI (RoboMaster) · $125goBILDA Saturn 5303-2402-0051goBILDA · $59.99goBILDA Saturn 5303-2402-0071goBILDA · $59.99goBILDA Saturn 5303-2402-0100goBILDA · $59.99
FAQ
iPower GBM2804H-100T Gimbal Motor questions
How much does the iPower GBM2804H-100T Gimbal Motor cost?
From $18.99 at shop.iflight.com. Prices are observed unit prices before tax and shipping.
What are the iPower GBM2804H-100T Gimbal Motor dimensions?
35 × 35 × 15 mm. A STEP model is available for enclosure fit checks.
Where does this iPower GBM2804H-100T Gimbal Motor data come from?
Every value in this record is traced to a source — 2 documents including the board and chip datasheets — with the page and table cited per value. Unknowns are left explicit, never guessed.