Distance, altitude and proximity sensing
Single-point ranging to 40 m over uart/i2c — altitude hold, level sensing and stop-distance checks.
Engineering inference
Benewake
Benewake TF02-Pro 40 m IP65 Lidar
Benewake TF02-Pro: IP65 single-point ToF lidar, 0.1–40 m at 90 % reflectivity and 13.5 m at 10 % (also at 100 klux), ±5 cm to 5 m then ±1 %, 3° FoV, 100 Hz default (1–1000 Hz), UART 115200 or I2C 0x10, 5–12 V ≤ 200 mA (≤ 1 W), 850 nm VCSEL Class 1, 69 × 41.5 × 26 mm, 50 g with 80 cm cable.
TF02-ProDevelopment boardPrice$87.90www.dfrobot.com · in stock
Buy at www.dfrobot.com Overview
Motor essentials
Facts about the complete product. Unknown values remain open design questions.
A good fit for
Guidance to help you shortlist. The basis is shown for each recommendation.
No-load speed, rated performance and stall limits describe different operating points. A stall specification is not a continuous operating rating.
3D model & CAD
3D model & CAD files
Generated from the datasheet's dimensioned drawing and measured against it. Download the STEP to check fit in your own enclosure.
- Envelope (L × W × H)
- 69 × 41.5 × 26 mm
- Verification
- generated
- Envelope complete
- Yes
Range & scan
Range, scan and interface
How far it sees, how fast it scans, and how the robot reads it.
- Lidar type
- single-point
- Min range
- 0.1 m
- Max range
- 40 m
- Max range rated at reflectivity
- 90 %
- Accuracy (±)
- 50 mm
- Accuracy detail
- ±5 cm (0.1–5 m), ±1 % (5–40 m)
- Scan frequency
- 100 Hz
- Sample rate
- 1,000 Hz
- Horizontal field of view
- 3 °
- Vertical field of view
- 3 °
- Wavelength
- 850 nm
- Laser safety class
- Class 1 (EN 60825)
- Interface
- UART/I2C
- Ambient light rating
- 100 klux
- IP rating
- IP65
- Power
- 1 W
- Weight
- 50 g
- Supply voltage
- 5–12 V
| Pin / wire | Position | Role | Notes |
|---|---|---|---|
| +5V | power in | Red wire — Power supply | |
| RXD/SDA | uart rx | White wire — Receiving/Data | |
| TXD/SCL | uart tx | Green wire — Transmitting/Clock | |
| GND | ground | Black wire — Ground |
| Connector | Type |
|---|---|
| p4 | 1.25-4P (Molex 51021-0400) on an 80 cm lead: red +5V, white RXD/SDA, green TXD/SCL, black GND |
Max range is the printed figure at the stated target reflectivity; accuracy is the typical datasheet value. Scan frequency is the default rotation or frame rate.
Specifications
Motor performance
No-load, rated-load and stall figures retain their separate test conditions.
Stall torque and current are not continuous ratings. Check the duty cycle and starting load when choosing the driver and power supply.
Thermal limits by level
Product operating conditions, chip ambient ratings, package case limits and junction maxima remain separate.
Motor body
- Product operating range
- -20 to 60 °C
Mechanical dimensions
Reported product dimensions may exclude protruding components. Unknown height does not establish a complete clearance envelope.
- Length
- 69 mm
- Width
- 41.5 mm
- Reported height / thickness
- 26 mm
Attached generated geometry is an approximate envelope. A generated outline does not establish an electrically verified PCB footprint.
Board connectors
| ID / type | Pins | Pitch | Notes |
|---|---|---|---|
| p41.25-4P (Molex 51021-0400) on an 80 cm lead: red +5V, white RXD/SDA, green TXD/SCL, black GND | 4 | 1.25 mm | — |
Complete structured record
Every available field, including details beyond the summaries. Null means the value has not been established.
Sourcing & files
Supplier offers
US / USD is the target market. Observed price and stock are separate from a delivery quote.
www.dfrobot.com
US · USD
$87.90Minimum quantity unknown
- Observed stock
- in stock
- Checked
- Oct 17, 2026, 01:14 PM UTC
- Delivery estimate
- Not quoted
This observation is stale or has no verified check time. Recheck with the supplier.
Visit supplier (opens in a new tab)Delivery depends on quantity, postal code and shipping method. A dispatch statement such as “ship today” is not an arrival estimate.
Design files and references
Each source keeps its own verification status. Confirm the part revision and file contents before using it in a design.
Datasheet (opens in a new tab)
Manufacturer reference
Benewake TF02-Pro — DFRobot store photo (opens in a new tab)
Unverified reference
inspected: black finned IP65 housing with two windows, mounting ear and 4-wire lead; distributor photo
STEP (generated from datasheet drawing) — link unavailable
Generated asset
cad_check passed
Generated envelope geometry may also exist for this record. It does not replace manufacturer CAD or a verified electrical land pattern.
Source evidence
Document provenance, retrieval dates and the field groups supported by each source.
Supports: spec.constraints.electrical.io_voltage_v, spec.constraints.electrical.supply_voltage_max_v, spec.constraints.electrical.supply_voltage_min_v, spec.constraints.thermal.operating_temp_max_c, spec.constraints.thermal.operating_temp_min_c, spec.geometry.cad.bbox.height_mm, spec.geometry.cad.bbox.length_mm, spec.geometry.cad.bbox.width_mm, spec.geometry.cad.envelope_complete, spec.geometry.cad.mesh_path, spec.geometry.cad.step_path, spec.geometry.cad.verification, spec.geometry.dimensions.height_mm, spec.geometry.dimensions.length_mm, spec.geometry.dimensions.width_mm, spec.geometry.other.weight_g, spec.provides.accuracy_mm, spec.provides.accuracy_note, spec.provides.ambient_light_klux, spec.provides.features, spec.provides.fov_horizontal_deg, spec.provides.fov_vertical_deg, spec.provides.interface, spec.provides.ip_rating, spec.provides.laser_class, spec.provides.lidar_type, spec.provides.power_w, spec.provides.range_max_m, spec.provides.range_min_m, spec.provides.range_reflectivity_pct, spec.provides.sample_rate_hz, spec.provides.scan_frequency_hz, spec.provides.wavelength_nm, spec.usage.connectors, spec.usage.pinout, spec.usage.pinout_complete, spec.usage.requirements.other.supply_current_ma
sha256 e78edc3b5f0f95634b87e66ea851867a1451608c2d7e3d975c1c63e76cf78811
Supports: offers
FAQ
Benewake TF02-Pro 40 m IP65 Lidar questions
What voltage powers the Benewake TF02-Pro 40 m IP65 Lidar?
Supply range 5–12 V.
How much does the Benewake TF02-Pro 40 m IP65 Lidar cost?
From $87.9 at www.dfrobot.com. Prices are observed unit prices before tax and shipping.
What are the Benewake TF02-Pro 40 m IP65 Lidar dimensions?
69 × 41.5 × 26 mm. A STEP model is available for enclosure fit checks.
Where does this Benewake TF02-Pro 40 m IP65 Lidar data come from?
Every value in this record is traced to a source — 2 documents including the board and chip datasheets — with the page and table cited per value. Unknowns are left explicit, never guessed.