Touch and force sensing
Reads contact force up to about 20 N as a falling resistance (analog) — squeeze and touch on a gripper pad, fingertip or robot skin.
Engineering inference
Interlink Electronics
Interlink FSR 408 Long Strip, 24 in
Interlink FSR 408 extra-long force-sensitive resistor strip (Adafruit 1071): 1/4 in × 24 in (6.35 × 609.6 mm) sensing region — press anywhere along it, ~0.2 N actuation, 0.2–20 N range, >10 MΩ unloaded, <3 µs rise, 0.57 mm thick, 5 g. Detects force along a gripper finger, robot bumper or skin edge.
408Development boardPrice$19.95www.adafruit.com · out of stock
Buy at www.adafruit.com Motor essentials
Facts about the complete product. Unknown values remain open design questions.
A good fit for
Guidance to help you shortlist. The basis is shown for each recommendation.
Grasping and manipulation
Thin force sensitive resistor fits on a gripper jaw or finger to sense contact force while grasping.
Engineering inferenceNo-load speed, rated performance and stall limits describe different operating points. A stall specification is not a continuous operating rating.
Related parts
Similar to the Interlink FSR 408 Long Strip, 24 in
FAQ
Interlink FSR 408 Long Strip, 24 in questions
How much does the Interlink FSR 408 Long Strip, 24 in cost?
From $19.95 at www.adafruit.com. Prices are observed unit prices before tax and shipping.
What are the Interlink FSR 408 Long Strip, 24 in dimensions?
609.6 × 15.33 × 0.57 mm. A STEP model is available for enclosure fit checks.
Where does this Interlink FSR 408 Long Strip, 24 in data come from?
Every value in this record is traced to a source — 2 documents including the board and chip datasheets — with the page and table cited per value. Unknowns are left explicit, never guessed.
Sources
- Interlink FSR 408 Long Strip, 24 in datasheet — Interlink Electronics
- www.adafruit.com listing