Battery-powered and portable builds
Rechargeable 3.7 V 1200 mAh li-po cell with built-in protection — runs a board from a single-cell LiPo/Li-ion charger input.
Engineering inference
PKCELL
PKCELL LiPo 3.7 V 1200 mAh LP503562
PKCELL LP503562 lithium-polymer pouch cell: 3.7 V nominal, 1200 mAh (1140 mAh min), 4.2 V charge, 3.0 V cut-off, 1C (1.2 A) continuous discharge, built-in 1S protection (S-8261), 62 × 35 × 5 mm, 23 g, red/black leads to a JST PH 2-pin plug.
LP503562Development boardPrice$9.95www.adafruit.com · in stock
Buy at www.adafruit.com Motor essentials
Facts about the complete product. Unknown values remain open design questions.
- Rated voltage
- 3.7 V
A good fit for
Guidance to help you shortlist. The basis is shown for each recommendation.
Space-constrained and embedded builds
5 mm thin pouch.
Engineering inferenceNo-load speed, rated performance and stall limits describe different operating points. A stall specification is not a continuous operating rating.
FAQ
PKCELL LiPo 3.7 V 1200 mAh LP503562 questions
What voltage powers the PKCELL LiPo 3.7 V 1200 mAh LP503562?
Supply range 3–4.2 V.
How much does the PKCELL LiPo 3.7 V 1200 mAh LP503562 cost?
From $9.95 at www.adafruit.com. Prices are observed unit prices before tax and shipping.
What are the PKCELL LiPo 3.7 V 1200 mAh LP503562 dimensions?
62 × 35 × 5 mm. A STEP model is available for enclosure fit checks.
Where does this PKCELL LiPo 3.7 V 1200 mAh LP503562 data come from?
Every value in this record is traced to a source — 2 documents including the board and chip datasheets — with the page and table cited per value. Unknowns are left explicit, never guessed.