DFRobot 10 DOF IMU BNO055 + BMP280 pinout
All 11 pins of the DFRobot 10 DOF IMU BNO055 + BMP280, each mapped to the chip pad it routes to, with its functions and — for 0 pins — the voltage and current limits from the chip datasheet.
11 pins0 with electrical limits1 power in1 ground1 clock1 data5 control1 interrupt1 address
DFRobot 10 DOF IMU BNO055 + BMP280 pins, functions and electrical limits
| Pin | Position | Kind | Chip pad | Functions | VIH | VIL | VOH | VOL | IOH | IOL | 5 V tolerant | Source |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| /VCC | 1 | power in | power_in | |||||||||
| -/GND | 2 | ground | ground | |||||||||
| C | 3 | clock | c | |||||||||
| D | 4 | data | d | |||||||||
| NBOOT | 5 | control | nboot | |||||||||
| RST | 6 | control | rst | |||||||||
| INT | 7 | interrupt | int | |||||||||
| I2C_ADDR | 8 | address | i2c_addr | |||||||||
| PS2 | 9 | control | ps2 | |||||||||
| PS1 | 10 | control | ps1 | |||||||||
| BL_IND | 11 | control | bl_ind |
DFRobot 10 DOF IMU BNO055 + BMP280 overview · All imus & motion sensors