Connected IoT devices and wireless sensor nodes
On-board radio: 2.4GHz Wi-Fi 6; Bluetooth 5.2/BLE.
Engineering inference
Luckfox
Luckfox Pico Ultra W
Compact RV1106G3 Linux vision board with a 1 TOPS NPU, 5 MP ISP, MIPI CSI camera input, 256 MB RAM, 8 GB eMMC, 30 GPIO at 3.3 V, Ethernet/PoE, Wi-Fi 6 and Bluetooth 5.2; 50 × 53 mm.
Luckfox Pico Ultra WDevelopment boardPrice$50.99Luckfox · in stock
Buy at Luckfox Board essentials
Facts about the complete product. Unknown values remain open design questions.
- Exposed GPIO
- 30
- Board I/O voltage
- 3.3 V
- Board flash capacity
- 8,192 MiB
- Board SRAM capacity
- 256 MiB
- Board operating range
- -20 to 85 °C
A good fit for
Guidance to help you shortlist. The basis is shown for each recommendation.
Camera and vision projects
Native camera interface on the main chip.
Engineering inferenceInside this board
The board is the parent product. Each chip has its own memory, pins, capabilities and thermal limits.
main processor
RV1106G3
Rockchip Electronics Co., Ltd.
db020e01-d9ba-5607-814c-49d9e913c262--mcu- Architecture
- Arm Cortex-A7 and RISC-V MCU
- Documented clock
- 1,200 MHz
- On-chip SRAM
- 32 KiB
flash memory
eMMC 8G
Manufacturer unknown
db020e01-d9ba-5607-814c-49d9e913c262--u7FAQ
Luckfox Pico Ultra W questions
What microcontroller does the Luckfox Pico Ultra W use?
The Luckfox Pico Ultra W is built around the RV1106G3, alongside eMMC 8G.
How many GPIO pins does the Luckfox Pico Ultra W have?
30 GPIO pins are exposed. Xirkit documents 52 board pins, 28 of them with pin-level electrical limits.
Are the Luckfox Pico Ultra W I/O pins 5 V tolerant?
No. The I/O pins are not 5 V tolerant — they run at 3.3 V logic; use a level shifter for 5 V signals. Input-high threshold: ≥ 2 V.
How much current can a Luckfox Pico Ultra W GPIO pin source?
Documented output-high current per pin: not specified in the RV1106 datasheet — drive strength is software-configurable, no IOH/IOL table. Values are traced to the chip datasheet; see the pinout table for per-pin limits and conditions.
What voltage powers the Luckfox Pico Ultra W?
Supply range 5–5 V. Power inputs: 5V, 5V, VCC5V0_SYS.
How much does the Luckfox Pico Ultra W cost?
From $50.99 at Luckfox. Prices are observed unit prices before tax and shipping.
What are the Luckfox Pico Ultra W dimensions?
50 × 52.97 × 1.6 mm. A STEP model is available for enclosure fit checks.
Which interfaces does the Luckfox Pico Ultra W support?
gpio, uart, i2c, pwm, jtag, spi, camera, display, i2s, other, sdio, analog, control.
Where does this Luckfox Pico Ultra W data come from?
Every value in this record is traced to a source — 2 documents including the board and chip datasheets — with the page and table cited per value. Unknowns are left explicit, never guessed.
Data & sources