Distance, altitude and proximity sensing
Single-point ranging to 1.2 m over i2c — altitude hold, level sensing and stop-distance checks.
Engineering inference
Pololu
Pololu VL53L4CD 1.2 m ToF Sensor Carrier
Pololu 3692 carrier for the ST VL53L4CD short-range ToF sensor: 1–1200 mm (detects from 0 mm; 550 mm outdoors), ±7 mm up to 100 mm then ±3 %, 18° diagonal FoV, up to 100 Hz, 940 nm Class 1 VCSEL, I2C up to 1 MHz with level shifters, 2.6–5.5 V (2.8 V LDO), 25 mA (< 100 µA ULP), 13 × 18 × 2 mm, 0.5 g.
3692Development boardPrice$13.95www.pololu.com · in stock
Buy at www.pololu.com Overview
Motor essentials
Facts about the complete product. Unknown values remain open design questions.
A good fit for
Guidance to help you shortlist. The basis is shown for each recommendation.
No-load speed, rated performance and stall limits describe different operating points. A stall specification is not a continuous operating rating.
3D model & CAD
3D model & CAD files
Generated from the datasheet's dimensioned drawing and measured against it. Download the STEP to check fit in your own enclosure.
- Envelope (L × W × H)
- 18 × 13 × 2 mm
- Verification
- generated
- Envelope complete
- Yes
Range & scan
Range, scan and interface
How far it sees, how fast it scans, and how the robot reads it.
- Lidar type
- single-point
- Ranging method
- dToF
- Min range
- 0.001 m
- Max range
- 1.2 m
- Max range rated at reflectivity
- 88 %
- Accuracy (±)
- 7 mm
- Accuracy detail
- ±7 mm (1–100 mm), ±8 mm (101–200 mm), ±3 % beyond 200 mm (white 88 %, indoor)
- Scan frequency
- 100 Hz
- Sample rate
- 100 Hz
- Horizontal field of view
- 18 °
- Vertical field of view
- 18 °
- Wavelength
- 940 nm
- Laser safety class
- Class 1 (IEC 60825-1:2014)
- Interface
- I2C
- ROS 2 driver
- No
- Weight
- 0.5 g
- Supply voltage
- 2.6–5.5 V
| Pin / wire | Position | Role | Notes |
|---|---|---|---|
| VDD | other | Regulated 2.8 V output . Up to around 100 mA is available to power external components. (If you want to bypass the internal regulator, you can instead use this pin as an input for voltages between 2.6 V and 3.5 V with VIN disconnected.) | |
| VIN | power in | This is the main 2.8 V to 5.5 V power supply connection. The SCL and SDA level shifters pull the I²C lines high to this level. | |
| GND | ground | The ground (0 V) connection for your power supply. Your I²C control source must also share a common ground with this board. | |
| SDA | i2c sda | Level-shifted I²C data line: HIGH is VIN, LOW is 0 V | |
| SCL | i2c scl | Level-shifted I²C clock line: HIGH is VIN, LOW is 0 V | |
| XSHUT | other | This pin is an active-low shutdown input; the board pulls it up to VDD to enable the sensor by default. Driving this pin low puts the sensor into hardware standby. This input is not level-shifted and it is not 5V-tolerant. | |
| GPIO1 | sync | Programmable interrupt output (VDD logic level). This output is not level-shifted. |
| Connector | Type |
|---|---|
| header | 7 × 0.1″ header holes: VDD, VIN, GND, SDA, SCL, XSHUT, GPIO1 (headers included) |
Max range is the printed figure at the stated target reflectivity; accuracy is the typical datasheet value. Scan frequency is the default rotation or frame rate.
Specifications
Motor performance
No-load, rated-load and stall figures retain their separate test conditions.
Stall torque and current are not continuous ratings. Check the duty cycle and starting load when choosing the driver and power supply.
Thermal limits by level
Product operating conditions, chip ambient ratings, package case limits and junction maxima remain separate.
Motor body
- Product operating range
- -30 to 85 °C
Mechanical dimensions
Reported product dimensions may exclude protruding components. Unknown height does not establish a complete clearance envelope.
- Length
- 18 mm
- Width
- 13 mm
- Reported height / thickness
- 2 mm
Attached generated geometry is an approximate envelope. A generated outline does not establish an electrically verified PCB footprint.
Board connectors
| ID / type | Pins | Pitch | Notes |
|---|---|---|---|
| header7 × 0.1″ header holes: VDD, VIN, GND, SDA, SCL, XSHUT, GPIO1 (headers included) | 7 | 2.54 mm | — |
Complete structured record
Every available field, including details beyond the summaries. Null means the value has not been established.
Sourcing & files
Supplier offers
US / USD is the target market. Observed price and stock are separate from a delivery quote.
www.pololu.com
US · USD
$13.95Minimum quantity unknown
- Observed stock
- in stock
- Checked
- Oct 17, 2026, 05:57 PM UTC
- Delivery estimate
- Not quoted
This observation is stale or has no verified check time. Recheck with the supplier.
Visit supplier (opens in a new tab)Delivery depends on quantity, postal code and shipping method. A dispatch statement such as “ship today” is not an arrival estimate.
Design files and references
Each source keeps its own verification status. Confirm the part revision and file contents before using it in a design.
Datasheet (opens in a new tab)
Manufacturer reference
Pololu VL53L4CD carrier (3692) — product photo (opens in a new tab)
Manufacturer reference
inspected: green carrier with the VL53L4CD module, 7 header holes and two mounting holes
STEP (generated from datasheet drawing) — link unavailable
Generated asset
cad_check passed
Generated envelope geometry may also exist for this record. It does not replace manufacturer CAD or a verified electrical land pattern.
Source evidence
Document provenance, retrieval dates and the field groups supported by each source.
Supports: spec.constraints.electrical.supply_voltage_max_v, spec.constraints.electrical.supply_voltage_min_v, spec.constraints.thermal.operating_temp_max_c, spec.constraints.thermal.operating_temp_min_c, spec.geometry.cad.bbox.height_mm, spec.geometry.cad.bbox.length_mm, spec.geometry.cad.bbox.width_mm, spec.geometry.cad.envelope_complete, spec.geometry.cad.mesh_path, spec.geometry.cad.step_path, spec.geometry.cad.verification, spec.geometry.dimensions.height_mm, spec.geometry.dimensions.length_mm, spec.geometry.dimensions.width_mm, spec.geometry.other.weight_g, spec.provides.accuracy_mm, spec.provides.accuracy_note, spec.provides.features, spec.provides.fov_horizontal_deg, spec.provides.fov_vertical_deg, spec.provides.interface, spec.provides.laser_class, spec.provides.lidar_type, spec.provides.range_max_m, spec.provides.range_min_m, spec.provides.range_reflectivity_pct, spec.provides.ranging_method, spec.provides.ros2_driver, spec.provides.sample_rate_hz, spec.provides.scan_frequency_hz, spec.provides.wavelength_nm, spec.usage.connectors, spec.usage.pinout, spec.usage.pinout_complete, spec.usage.requirements.other.supply_current_ma
sha256 0beb3bb5e958f6e463d919c3ac9226e5f3bdfa15fd09b009208a24d791e7707c
Supports: offers
FAQ
Pololu VL53L4CD 1.2 m ToF Sensor Carrier questions
What voltage powers the Pololu VL53L4CD 1.2 m ToF Sensor Carrier?
Supply range 2.6–5.5 V.
How much does the Pololu VL53L4CD 1.2 m ToF Sensor Carrier cost?
From $13.95 at www.pololu.com. Prices are observed unit prices before tax and shipping.
What are the Pololu VL53L4CD 1.2 m ToF Sensor Carrier dimensions?
18 × 13 × 2 mm. A STEP model is available for enclosure fit checks.
Where does this Pololu VL53L4CD 1.2 m ToF Sensor Carrier data come from?
Every value in this record is traced to a source — 2 documents including the board and chip datasheets — with the page and table cited per value. Unknowns are left explicit, never guessed.