Multi-camera edge vision
Two four-lane MIPI CSI inputs and a 10 TOPS Bayes BPU support local multi-camera perception and inference.
Engineering inference
D-Robotics
D-Robotics RDK X5 8GB
Robotics and edge-vision board with eight 1.5 GHz Cortex-A55 cores, a 10 TOPS Bayes BPU, 8 GB LPDDR4, dual four-lane CSI, CAN FD, Wi-Fi 6, Bluetooth 5.4, Gigabit Ethernet with PoE, four USB 3.0 hosts and a 40-pin header.
RDK X5 8GRevision V1.1Development boardPrice$190.00www.dfrobot.com · in stock
Buy at www.dfrobot.com Board essentials
Facts about the complete product. Unknown values remain open design questions.
- Exposed GPIO
- 28
- Board I/O voltage
- 3.3 V
- Board flash capacity
- 128 MiB
- Board SRAM capacity
- 8,192 MiB
- Board operating range
- -20 to 60 °C
A good fit for
Guidance to help you shortlist. The basis is shown for each recommendation.
ROS robots and CAN motor control
TogetheROS.Bot support, CAN FD, 28 GPIOs, and the 40-pin expansion header suit mobile robots and control systems.
Engineering inferenceEmbedded Linux edge systems
Eight Cortex-A55 cores, 8 GB LPDDR4, Ubuntu 22.04 support, and onboard NAND suit substantial local applications.
Engineering inferenceOn-device machine learning
The Sunrise 5 Bayes BPU provides 10 TOPS INT8 inference without relying on a cloud accelerator.
Engineering inferenceConnected industrial gateways
Gigabit Ethernet with PoE, CAN FD, Wi-Fi 6, Bluetooth 5.4, and USB 3.0 cover wired and wireless edge connectivity.
Engineering inferenceAudio and voice processing
The Cadence HiFi 5 DSP and low-power voice support provide a dedicated path for audio workloads.
Engineering inferenceUSB peripherals and device workflows
Four USB 3.0 host ports and a separate USB 2.0 device interface support cameras, storage, peripherals, and flashing.
Engineering inferenceInside this board
The board is the parent product. Each chip has its own memory, pins, capabilities and thermal limits.
main processor
Sunrise 5
D-Robotics
2131941a-13f9-5fb2-bed8-420ce6140f73--mcu- Architecture
- octa-core Arm Cortex-A55
- Documented clock
- 1,500 MHz
FAQ
D-Robotics RDK X5 8GB questions
What microcontroller does the D-Robotics RDK X5 8GB use?
The D-Robotics RDK X5 8GB is built around the Sunrise 5.
How many GPIO pins does the D-Robotics RDK X5 8GB have?
28 GPIO pins are exposed. Xirkit documents 40 board pins, 0 of them with pin-level electrical limits.
Are the D-Robotics RDK X5 8GB I/O pins 5 V tolerant?
No. The I/O pins are not 5 V tolerant — they run at 3.3 V logic; use a level shifter for 5 V signals.
What voltage powers the D-Robotics RDK X5 8GB?
Supply range 5–5 V.
How much does the D-Robotics RDK X5 8GB cost?
From $190 at www.dfrobot.com. Prices are observed unit prices before tax and shipping.
What are the D-Robotics RDK X5 8GB dimensions?
85 × 56 × 1.6 mm. A STEP model is available for enclosure fit checks.
Which interfaces does the D-Robotics RDK X5 8GB support?
i2c, uart, i2s, spi, pwm.
How do I program the D-Robotics RDK X5 8GB?
Supported frameworks: Ubuntu 22.04, TogetheROS.Bot, OpenExplore.
Where does this D-Robotics RDK X5 8GB data come from?
Every value in this record is traced to a source — 2 documents including the board and chip datasheets — with the page and table cited per value. Unknowns are left explicit, never guessed.