Balance, orientation and motion tracking
6-axis BMI270 gives angular rate and acceleration for balancing, tilt and heading estimation over i2c/spi.
Engineering inference
SparkFun Electronics
SparkFun SEN-22397 6-DoF IMU breakout (Qwiic) with the Bosch BMI270 ultra-low-power IMU: 16-bit accel ±2/4/8/16 g, 16-bit gyro ±125–2000 dps, on-chip motion / no-motion / step-counter / gesture features, 400 kHz aux interface for an external magnetometer, I2C 0x68 / 0x69 or SPI, 1.71–3.6 V, two INT pins, standard 1 × 1 in Qwiic board.
SEN-22397Development boardFacts about the complete product. Unknown values remain open design questions.
Guidance to help you shortlist. The basis is shown for each recommendation.
6-axis BMI270 gives angular rate and acceleration for balancing, tilt and heading estimation over i2c/spi.
Engineering inferenceNo-load speed, rated performance and stall limits describe different operating points. A stall specification is not a continuous operating rating.
Generated from the datasheet's dimensioned drawing and measured against it. Download the STEP to check fit in your own enclosure.
thickness=1.6 mm assumed: PCB thickness not printed; 1.6 mm assumed for the CAD envelope only
What it measures, how fast, and how the controller reads it.
| Pin / wire | Position | Role | Notes |
|---|---|---|---|
| GND | J4-1 | ground | ground |
| 3V3 | J4-2 | power in | 3.3 V supply (1.71–3.6 V) |
| SDA/PICO | J4-3 | i2c sda | I2C data / SPI PICO |
| SCL/SCK | J4-4 | i2c scl | I2C clock / SPI clock |
| ADR/POCI | J4-5 | address | I2C address select / SPI POCI |
| CS | J4-6 | spi cs | SPI chip select |
| ASDX | J3-1 | other | auxiliary I2C data (external magnetometer) |
| ASCX | J3-2 | other | auxiliary I2C clock |
| INT1 | J3-3 | interrupt | interrupt 1 |
| INT2 | J3-4 | interrupt | interrupt 2 |
| OCS | J3-5 | other | auxiliary (OIS) SPI chip select |
| OSDO | J3-6 | other | auxiliary (OIS) SPI data out |
| Connector | Type |
|---|---|
| qwiic | Qwiic I2C (JST SH 4-pin), two horizontal connectors + PTH headers |
Ranges are the largest selectable full-scale setting; noise densities are typical datasheet values.
No-load, rated-load and stall figures retain their separate test conditions.
Stall torque and current are not continuous ratings. Check the duty cycle and starting load when choosing the driver and power supply.
Product operating conditions, chip ambient ratings, package case limits and junction maxima remain separate.
Reported product dimensions may exclude protruding components. Unknown height does not establish a complete clearance envelope.
Attached generated geometry is an approximate envelope. A generated outline does not establish an electrically verified PCB footprint.
| ID / type | Pins | Pitch | Notes |
|---|---|---|---|
| qwiicQwiic I2C (JST SH 4-pin), two horizontal connectors + PTH headers | 4 | Unknown | — |
Every available field, including details beyond the summaries. Null means the value has not been established.
US / USD is the target market. Observed price and stock are separate from a delivery quote.
US · USD
Observed within the last 24 hours. Confirm the current supplier quote.
Visit supplier (opens in a new tab)Delivery depends on quantity, postal code and shipping method. A dispatch statement such as “ship today” is not an arrival estimate.
Each source keeps its own verification status. Confirm the part revision and file contents before using it in a design.
Manufacturer reference
Manufacturer reference
maker product photo
Generated asset
cad_check passed
Generated envelope geometry may also exist for this record. It does not replace manufacturer CAD or a verified electrical land pattern.
Document provenance, retrieval dates and the field groups supported by each source.
Supports: spec.constraints.electrical.io_voltage_v, spec.constraints.electrical.supply_voltage_max_v, spec.constraints.electrical.supply_voltage_min_v, spec.geometry.cad.assumptions, spec.geometry.cad.bbox.height_mm, spec.geometry.cad.bbox.length_mm, spec.geometry.cad.bbox.width_mm, spec.geometry.cad.envelope_complete, spec.geometry.cad.mesh_path, spec.geometry.cad.step_path, spec.geometry.cad.verification, spec.geometry.dimensions.height_mm, spec.geometry.dimensions.length_mm, spec.geometry.dimensions.width_mm, spec.provides.accel_range_g, spec.provides.axes, spec.provides.features, spec.provides.gyro_range_dps, spec.provides.i2c_address, spec.provides.interface, spec.provides.sensor_fusion, spec.provides.sensor_ic, spec.provides.sensor_type, spec.usage.connectors, spec.usage.pinout, spec.usage.pinout_complete
sha256 8eaf1966cd092786071e3d4066301de762d835fdca32abcb288977805834535d
Supports: offers
Supply range 1.71–3.6 V.
From $18.5 at SparkFun. Prices are observed unit prices before tax and shipping.
25.4 × 25.4 × 1.6 mm. A STEP model is available for enclosure fit checks.
Every value in this record is traced to a source — 2 documents including the board and chip datasheets — with the page and table cited per value. Unknowns are left explicit, never guessed.