Balance, orientation and motion tracking
6-axis ISM330DHCX gives angular rate and acceleration for balancing, tilt and heading estimation over i2c/spi.
Engineering inference
Adafruit Industries
Adafruit ISM330DHCX 6-DoF Industrial IMU
Adafruit 4502 ISM330DHCX industrial 6-DoF IMU (STEMMA QT): ST ISM330DHCX, accel ±2/4/8/16 g at 1.6 Hz–6.7 kHz, gyro up to ±4000 dps at 12.5 Hz–6.7 kHz, −40 to +105 °C with temperature compensation, machine-learning core, I2C (0x6A / 0x6B) or SPI, 3–5 V supply and logic, 1.0 × 0.7 in board.
4502Development boardPrice$19.95www.adafruit.com · in stock
Buy at www.adafruit.com Overview
Motor essentials
Facts about the complete product. Unknown values remain open design questions.
A good fit for
Guidance to help you shortlist. The basis is shown for each recommendation.
No-load speed, rated performance and stall limits describe different operating points. A stall specification is not a continuous operating rating.
3D model & CAD
3D model & CAD files
Generated from the datasheet's dimensioned drawing and measured against it. Download the STEP to check fit in your own enclosure.
- Envelope (L × W × H)
- 25.4 × 17.78 × 1.6 mm
- Verification
- generated
- Envelope complete
- No — some heights assumed
thickness=1.6 mm assumed: PCB thickness not printed (guide, fab print, store page); 1.6 mm assumed for the CAD envelope only
Axes & interface
Axes, ranges and interface
What it measures, how fast, and how the controller reads it.
- Sensor type
- imu 6dof
- Sensor IC
- ISM330DHCX
- Axes
- 6 DoF
- Accelerometer range
- 16 ±g
- Gyroscope range
- 4,000 ±°/s
- Max output data rate
- 6,700 Hz
- On-chip sensor fusion
- No
- Interface
- I2C/SPI
- I2C address
- 0x6A (0x6B with DO high)
- Supply voltage
- 3–5 V
| Pin / wire | Position | Role | Notes |
|---|---|---|---|
| Vin | power in | this is the power pin. Since the sensor chip uses 3 VDC, we have included a voltage regulator on board that will take 3-5VDC and safely convert it down. | |
| 3Vo | power out | this is the 3.3V output from the voltage regulator, you can grab up to 100mA from this if you like | |
| GND | ground | common ground for power and logic I2C Logic Pins | |
| SCL | i2c scl | I2C clock pin, connect to your microcontroller's I2C clock line. This pin is level shifted so you can use 3-5V logic, and there's a 10K pullup on this pin. | |
| SDA | i2c sda | I2C data pin, connect to your microcontroller's I2C data line. This pin is level shifted so you can use 3-5V logic, and there's a 10K pullup on this pin. | |
| SCK | spi sck | This is also the SPI Clock pin, it's an input to the chip | |
| DO (Bottom) | spi miso | this is the serial Data Out / Microcontroller In Sensor Out pin, for data sent from the LSM6DSOX, ISM330DHCX, or LSM6DSO32 to your processor. | |
| CS (Bottom) | spi cs | this is the Chip Select pin, drop it low to start an SPI transaction. | |
| INT1 | interrupt | This is the primary interrupt pin. You can setup the LSM6DSOX, ISM330DHCX, or LSM6DSO32 to pull this low when certain conditions are met such as new measurement data being available. Consult the datasheet (https:// adafru.it/HFU) for usage | |
| INT2 | interrupt | This is the primary interrupt pin. You can setup the LSM6DSOX, ISM330DHCX, or LSM6DSO32 to pull this low when certain conditions are met such as new measurement data being available. Consult the datasheet (https:// adafru.it/HFU) for usage | |
| D0 (Bottom) | address | I2C Address pin. Pulling this pin high or bridging the solder jumper on the back will change the I2C address from 0x6A to 0x6B |
| Connector | Type |
|---|---|
| stemma_qt | STEMMA QT / Qwiic I2C (JST SH 4-pin), two connectors |
Ranges are the largest selectable full-scale setting; noise densities are typical datasheet values.
Specifications
Motor performance
No-load, rated-load and stall figures retain their separate test conditions.
Stall torque and current are not continuous ratings. Check the duty cycle and starting load when choosing the driver and power supply.
Thermal limits by level
Product operating conditions, chip ambient ratings, package case limits and junction maxima remain separate.
Motor body
- Product operating range
- -40 to 105 °C
ISM330DHCX · sensor
Mechanical dimensions
Reported product dimensions may exclude protruding components. Unknown height does not establish a complete clearance envelope.
- Length
- 25.4 mm
- Width
- 17.78 mm
- Reported height / thickness
- 1.6 mm
Attached generated geometry is an approximate envelope. A generated outline does not establish an electrically verified PCB footprint.
Board connectors
| ID / type | Pins | Pitch | Notes |
|---|---|---|---|
| stemma_qtSTEMMA QT / Qwiic I2C (JST SH 4-pin), two connectors | 4 | Unknown | — |
Complete structured record
Every available field, including details beyond the summaries. Null means the value has not been established.
Sourcing & files
Supplier offers
US / USD is the target market. Observed price and stock are separate from a delivery quote.
www.adafruit.com
US · USD
$19.95Minimum quantity unknown
- Observed stock
- in stock
- Checked
- Oct 1, 2026, 07:15 AM UTC
- Delivery estimate
- Not quoted
Observed within the last 24 hours. Confirm the current supplier quote.
Visit supplier (opens in a new tab)Delivery depends on quantity, postal code and shipping method. A dispatch statement such as “ship today” is not an arrival estimate.
Design files and references
Each source keeps its own verification status. Confirm the part revision and file contents before using it in a design.
Datasheet (opens in a new tab)
Manufacturer reference
Adafruit ISM330DHCX 6-DoF IMU (Adafruit 4502) — store photo (opens in a new tab)
Manufacturer reference
store gallery: angled shot of the breakout (second gallery image)
STEP (generated from datasheet drawing) — link unavailable
Generated asset
cad_check passed
Generated envelope geometry may also exist for this record. It does not replace manufacturer CAD or a verified electrical land pattern.
Source evidence
Document provenance, retrieval dates and the field groups supported by each source.
Supports: spec.constraints.electrical.io_voltage_v, spec.constraints.electrical.supply_voltage_max_v, spec.constraints.electrical.supply_voltage_min_v, spec.constraints.thermal.operating_temp_max_c, spec.constraints.thermal.operating_temp_min_c, spec.geometry.cad.assumptions, spec.geometry.cad.bbox.height_mm, spec.geometry.cad.bbox.length_mm, spec.geometry.cad.bbox.width_mm, spec.geometry.cad.envelope_complete, spec.geometry.cad.mesh_path, spec.geometry.cad.step_path, spec.geometry.cad.verification, spec.geometry.dimensions.height_mm, spec.geometry.dimensions.length_mm, spec.geometry.dimensions.width_mm, spec.provides.accel_range_g, spec.provides.axes, spec.provides.features, spec.provides.gyro_range_dps, spec.provides.i2c_address, spec.provides.interface, spec.provides.output_data_rate_hz, spec.provides.sensor_fusion, spec.provides.sensor_ic, spec.provides.sensor_type, spec.usage.connectors, spec.usage.pinout, spec.usage.pinout_complete
sha256 945fbf1b096df16412c69922c9c06fe2c0f5a4272ced9017f3c339d98a1ef458
Supports: offers
FAQ
Adafruit ISM330DHCX 6-DoF Industrial IMU questions
What voltage powers the Adafruit ISM330DHCX 6-DoF Industrial IMU?
Supply range 3–5 V.
How much does the Adafruit ISM330DHCX 6-DoF Industrial IMU cost?
From $19.95 at www.adafruit.com. Prices are observed unit prices before tax and shipping.
What are the Adafruit ISM330DHCX 6-DoF Industrial IMU dimensions?
25.4 × 17.78 × 1.6 mm. A STEP model is available for enclosure fit checks.
Where does this Adafruit ISM330DHCX 6-DoF Industrial IMU data come from?
Every value in this record is traced to a source — 2 documents including the board and chip datasheets — with the page and table cited per value. Unknowns are left explicit, never guessed.
Sources
- Adafruit ISM330DHCX 6-DoF Industrial IMU datasheet — Adafruit Industries
- www.adafruit.com listing