Balance, orientation and motion tracking
6-axis LSM6DSV16X gives angular rate and acceleration for balancing, tilt and heading estimation over i2c.
Engineering inference
SparkFun Electronics
SparkFun SEN-21336 Micro 6-DoF IMU (Qwiic) with the ST LSM6DSV16X: accel ±2–16 g, gyro ±125–4000 dps, on-chip machine-learning core, finite-state machine, Qvar gesture sensing and low-power sensor fusion, I2C 0x6B / 0x6A, 1.71–3.6 V, 0.65 mA, one Qwiic connector and an INT1 pad on a 0.75 × 0.30 in board.
SEN-21336Development boardFacts about the complete product. Unknown values remain open design questions.
Guidance to help you shortlist. The basis is shown for each recommendation.
6-axis LSM6DSV16X gives angular rate and acceleration for balancing, tilt and heading estimation over i2c.
Engineering inferenceOn-chip sensor fusion outputs orientation directly — no fusion filter to run on the host.
Engineering inferenceNo-load speed, rated performance and stall limits describe different operating points. A stall specification is not a continuous operating rating.
Generated from the datasheet's dimensioned drawing and measured against it. Download the STEP to check fit in your own enclosure.
thickness=1.6 mm assumed: PCB thickness not printed; 1.6 mm assumed for the CAD envelope only
What it measures, how fast, and how the controller reads it.
| Pin / wire | Position | Role | Notes |
|---|---|---|---|
| GND | J1-1 | ground | ground (Qwiic) |
| 3V3 | J1-2 | power in | 3.3 V (Qwiic VCC) |
| SDA | J1-3 | i2c sda | I2C data (Qwiic) |
| SCL | J1-4 | i2c scl | I2C clock (Qwiic) |
| INT1 | J3 | interrupt | interrupt 1 PTH pad |
| Connector | Type |
|---|---|
| qwiic | 1× Qwiic (JST SH 4-pin) + INT1 / GND PTH pads |
Ranges are the largest selectable full-scale setting; noise densities are typical datasheet values.
No-load, rated-load and stall figures retain their separate test conditions.
Stall torque and current are not continuous ratings. Check the duty cycle and starting load when choosing the driver and power supply.
Product operating conditions, chip ambient ratings, package case limits and junction maxima remain separate.
Reported product dimensions may exclude protruding components. Unknown height does not establish a complete clearance envelope.
Attached generated geometry is an approximate envelope. A generated outline does not establish an electrically verified PCB footprint.
| ID / type | Pins | Pitch | Notes |
|---|---|---|---|
| qwiic1× Qwiic (JST SH 4-pin) + INT1 / GND PTH pads | 4 | Unknown | — |
Every available field, including details beyond the summaries. Null means the value has not been established.
US / USD is the target market. Observed price and stock are separate from a delivery quote.
US · USD
Observed within the last 24 hours. Confirm the current supplier quote.
Visit supplier (opens in a new tab)Delivery depends on quantity, postal code and shipping method. A dispatch statement such as “ship today” is not an arrival estimate.
Each source keeps its own verification status. Confirm the part revision and file contents before using it in a design.
Manufacturer reference
Manufacturer reference
maker product photo
Generated asset
cad_check passed
Generated envelope geometry may also exist for this record. It does not replace manufacturer CAD or a verified electrical land pattern.
Document provenance, retrieval dates and the field groups supported by each source.
Supports: spec.constraints.electrical.supply_voltage_max_v, spec.constraints.electrical.supply_voltage_min_v, spec.geometry.cad.assumptions, spec.geometry.cad.bbox.height_mm, spec.geometry.cad.bbox.length_mm, spec.geometry.cad.bbox.width_mm, spec.geometry.cad.envelope_complete, spec.geometry.cad.mesh_path, spec.geometry.cad.step_path, spec.geometry.cad.verification, spec.geometry.dimensions.height_mm, spec.geometry.dimensions.length_mm, spec.geometry.dimensions.width_mm, spec.provides.accel_range_g, spec.provides.axes, spec.provides.features, spec.provides.gyro_range_dps, spec.provides.i2c_address, spec.provides.interface, spec.provides.sensor_fusion, spec.provides.sensor_ic, spec.provides.sensor_type, spec.usage.connectors, spec.usage.pinout, spec.usage.pinout_complete, spec.usage.requirements.other.supply_current_ma
sha256 f65be62a0e0927e4c740160912ff2e7dea8c3eab1ef114f01bf0066f357c4f57
Supports: offers
Supply range 1.71–3.6 V.
From $25.5 at www.sparkfun.com. Prices are observed unit prices before tax and shipping.
19.05 × 7.62 × 1.6 mm. A STEP model is available for enclosure fit checks.
Every value in this record is traced to a source — 2 documents including the board and chip datasheets — with the page and table cited per value. Unknowns are left explicit, never guessed.